linux-stable.git/arch/x86, branch v4.4

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2016-01-08T23:58:14+00:00

Pull KVM fix from Paolo Bonzini:
 "A simple fix.  I'm sending it before the merge window, because it
  refines a patch found in your master branch but not yet in the
  kvm/next branch that is destined for 4.5"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: x86: only channel 0 of the i8254 is linked to the HPET

Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2016-01-08T23:21:48+00:00

Pull x86 fixes from Ingo Molnar:
 "A handful of x86 fixes:

   - a syscall ABI fix, fixing an Android breakage
   - a Xen PV guest fix relating to the RTC device, causing a
     non-working console
   - a Xen guest syscall stack frame fix
   - an MCE hotplug CPU crash fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/numachip: Fix NumaConnect2 MMCFG PCI access
  x86/entry: Restore traditional SYSENTER calling convention
  x86/entry: Fix some comments
  x86/paravirt: Prevent rtc_cmos platform device init on PV guests
  x86/xen: Avoid fast syscall path for Xen PV guests
  x86/mce: Ensure offline CPUs don't participate in rendezvous process

kvm: x86: only channel 0 of the i8254 is linked to the HPET

2016-01-07T12:50:38+00:00

While setting the KVM PIT counters in 'kvm_pit_load_count', if
'hpet_legacy_start' is set, the function disables the timer on
channel[0], instead of the respective index 'channel'. This is
because channels 1-3 are not linked to the HPET.  Fix the caller
to only activate the special HPET processing for channel 0.

Reported-by: P J P 
Fixes: 0185604c2d82c560dab2f2933a18f797e74ab5a8
Signed-off-by: Paolo Bonzini

x86/numachip: Fix NumaConnect2 MMCFG PCI access

2015-12-30T18:19:03+00:00

The MMCFG PCI accessors weren't being setup for NumacConnect2
correctly due to over-early assignment; this would create the
potential for the wrong PCI domain to be accessed.

Fix this by using the correct arch-specific PCI init function.

Signed-off-by: Daniel J Blueman 
Acked-by: Steffen Persvold 
Cc: Daniel Lezcano 
Cc: Linus Torvalds 
Link: http://lkml.kernel.org/r/1451498807-15920-1-git-send-email-daniel@numascale.com
Signed-off-by: Thomas Gleixner

arch/x86/xen/suspend.c: include xen/xen.h

2015-12-30T01:45:49+00:00

Fix the build warning:

  arch/x86/xen/suspend.c: In function 'xen_arch_pre_suspend':
  arch/x86/xen/suspend.c:70:9: error: implicit declaration of function 'xen_pv_domain' [-Werror=implicit-function-declaration]
          if (xen_pv_domain())
              ^

Reported-by: kbuild test robot 
Cc: Sasha Levin 
Cc: Konrad Rzeszutek Wilk 
Cc: Boris Ostrovsky 
Cc: David Vrabel 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2015-12-22T23:47:39+00:00

Pull kvm fixes from Paolo Bonzini:

 - A series of fixes to the MTRR emulation, tested in the BZ by several
   users so they should be safe this late

 - A fix for a division by zero

 - Two very simple ARM and PPC fixes

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Reload pit counters for all channels when restoring state
  KVM: MTRR: treat memory as writeback if MTRR is disabled in guest CPUID
  KVM: MTRR: observe maxphyaddr from guest CPUID, not host
  KVM: MTRR: fix fixed MTRR segment look up
  KVM: VMX: Fix host initiated access to guest MSR_TSC_AUX
  KVM: arm/arm64: vgic: Fix kvm_vgic_map_is_active's dist check
  kvm: x86: move tracepoints outside extended quiescent state
  KVM: PPC: Book3S HV: Prohibit setting illegal transaction state in MSR

um: Fix pointer cast

2015-12-22T23:31:51+00:00

Fix a pointer cast typo introduced in v4.4-rc5 especially visible for
the i386 subarchitecture where it results in a kernel crash.

[ Also removed pointless cast as per Al Viro - Linus ]

Fixes: 8090bfd2bb9a ("um: Fix fpstate handling")
Signed-off-by: Mickaël Salaün 
Cc: Jeff Dike 
Acked-by: Richard Weinberger 
Signed-off-by: Linus Torvalds

KVM: x86: Reload pit counters for all channels when restoring state

2015-12-22T14:36:26+00:00

Currently if userspace restores the pit counters with a count of 0
on channels 1 or 2 and the guest attempts to read the count on those
channels, then KVM will perform a mod of 0 and crash.  This will ensure
that 0 values are converted to 65536 as per the spec.

This is CVE-2015-7513.

Signed-off-by: Andy Honig 
Signed-off-by: Paolo Bonzini

KVM: MTRR: treat memory as writeback if MTRR is disabled in guest CPUID

2015-12-22T14:29:00+00:00

Virtual machines can be run with CPUID such that there are no MTRRs.
In that case, the firmware will never enable MTRRs and it is obviously
undesirable to run the guest entirely with UC memory.  Check out guest
CPUID, and use WB memory if MTRR do not exist.

Cc: qemu-stable@nongnu.org
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107561
Signed-off-by: Paolo Bonzini

KVM: MTRR: observe maxphyaddr from guest CPUID, not host

2015-12-22T14:28:56+00:00

Conversion of MTRRs to ranges used the maxphyaddr from the boot CPU.
This is wrong, because var_mtrr_range's mask variable then is discontiguous
(like FF00FFFF000, where the first run of 0s corresponds to the bits
between host and guest maxphyaddr).  Instead always set up the masks
to be full 64-bit values---we know that the reserved bits at the top
are zero, and we can restore them when reading the MSR.  This way
var_mtrr_range gets a mask that just works.

Fixes: a13842dc668b40daef4327294a6d3bdc8bd30276
Cc: qemu-stable@nongnu.org
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107561
Signed-off-by: Paolo Bonzini