linux-stable.git/arch/x86/kernel/mpparse.c, branch linux-5.2.y

x86/boot: Fix memory leak in default_get_smp_config()

2019-07-26T07:11:03+00:00

commit e74bd96989dd42a51a73eddb4a5510a6f5e42ac3 upstream.

When default_get_smp_config() is called with early == 1 and mpf->feature1
is non-zero, mpf is leaked because the return path does not do
early_memunmap().

Fix this and share a common exit routine.

Fixes: 5997efb96756 ("x86/boot: Use memremap() to map the MPF and MPC data")
Reported-by: Cfir Cohen 
Signed-off-by: David Rientjes 
Signed-off-by: Thomas Gleixner 
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907091942570.28240@chino.kir.corp.google.com
Signed-off-by: Greg Kroah-Hartman

x86/mm: Don't leak kernel addresses

2019-03-19T11:10:56+00:00

Since commit:

  ad67b74d2469d9b8 ("printk: hash addresses printed with %p")

at boot "____ptrval____" is printed instead of actual addresses:

    found SMP MP-table at [mem 0x000f5cc0-0x000f5ccf] mapped at [(____ptrval____)]

Instead of changing the print to "%px", and leaking a kernel addresses,
just remove the print completely, like in:

  071929dbdd865f77 ("arm64: Stop printing the virtual memory layout").

Signed-off-by: Matteo Croce 
Cc: Borislav Petkov 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Signed-off-by: Ingo Molnar

mm: remove include/linux/bootmem.h

2018-10-31T15:54:16+00:00

Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.

The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include 

@@
@@
- #include 
+ #include 

[sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h]
  Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au
[sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h]
  Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au
[sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
  Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au
Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport 
Signed-off-by: Stephen Rothwell 
Acked-by: Michal Hocko 
Cc: Catalin Marinas 
Cc: Chris Zankel 
Cc: "David S. Miller" 
Cc: Geert Uytterhoeven 
Cc: Greentime Hu 
Cc: Greg Kroah-Hartman 
Cc: Guan Xuetao 
Cc: Ingo Molnar 
Cc: "James E.J. Bottomley" 
Cc: Jonas Bonn 
Cc: Jonathan Corbet 
Cc: Ley Foon Tan 
Cc: Mark Salter 
Cc: Martin Schwidefsky 
Cc: Matt Turner 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Palmer Dabbelt 
Cc: Paul Burton 
Cc: Richard Kuo 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Russell King 
Cc: Serge Semin 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: Vineet Gupta 
Cc: Yoshinori Sato 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2018-02-15T01:02:15+00:00

Pull x86 PTI and Spectre related fixes and updates from Ingo Molnar:
 "Here's the latest set of Spectre and PTI related fixes and updates:

  Spectre:
   - Add entry code register clearing to reduce the Spectre attack
     surface
   - Update the Spectre microcode blacklist
   - Inline the KVM Spectre helpers to get close to v4.14 performance
     again.
   - Fix indirect_branch_prediction_barrier()
   - Fix/improve Spectre related kernel messages
   - Fix array_index_nospec_mask() asm constraint
   - KVM: fix two MSR handling bugs

  PTI:
   - Fix a paranoid entry PTI CR3 handling bug
   - Fix comments

  objtool:
   - Fix paranoid_entry() frame pointer warning
   - Annotate WARN()-related UD2 as reachable
   - Various fixes
   - Add Add Peter Zijlstra as objtool co-maintainer

  Misc:
   - Various x86 entry code self-test fixes
   - Improve/simplify entry code stack frame generation and handling
     after recent heavy-handed PTI and Spectre changes. (There's two
     more WIP improvements expected here.)
   - Type fix for cache entries

  There's also some low risk non-fix changes I've included in this
  branch to reduce backporting conflicts:

   - rename a confusing x86_cpu field name
   - de-obfuscate the naming of single-TLB flushing primitives"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
  x86/entry/64: Fix CR3 restore in paranoid_exit()
  x86/cpu: Change type of x86_cache_size variable to unsigned int
  x86/spectre: Fix an error message
  x86/cpu: Rename cpu_data.x86_mask to cpu_data.x86_stepping
  selftests/x86/mpx: Fix incorrect bounds with old _sigfault
  x86/mm: Rename flush_tlb_single() and flush_tlb_one() to __flush_tlb_one_[user|kernel]()
  x86/speculation: Add  dependency
  nospec: Move array_index_nospec() parameter checking into separate macro
  x86/speculation: Fix up array_index_nospec_mask() asm constraint
  x86/debug: Use UD2 for WARN()
  x86/debug, objtool: Annotate WARN()-related UD2 as reachable
  objtool: Fix segfault in ignore_unreachable_insn()
  selftests/x86: Disable tests requiring 32-bit support on pure 64-bit systems
  selftests/x86: Do not rely on "int $0x80" in single_step_syscall.c
  selftests/x86: Do not rely on "int $0x80" in test_mremap_vdso.c
  selftests/x86: Fix build bug caused by the 5lvl test which has been moved to the VM directory
  selftests/x86/pkeys: Remove unused functions
  selftests/x86: Clean up and document sscanf() usage
  selftests/x86: Fix vDSO selftest segfault for vsyscall=none
  x86/entry/64: Remove the unused 'icebp' macro
  ...

x86/cpu: Rename cpu_data.x86_mask to cpu_data.x86_stepping

2018-02-15T00:15:52+00:00

x86_mask is a confusing name which is hard to associate with the
processor's stepping.

Additionally, correct an indent issue in lib/cpu.c.

Signed-off-by: Jia Zhang 
[ Updated it to more recent kernels. ]
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: bp@alien8.de
Cc: tony.luck@intel.com
Link: http://lkml.kernel.org/r/1514771530-70829-1-git-send-email-qianyue.zj@alibaba-inc.com
Signed-off-by: Ingo Molnar

x86: Introduce and use MP IRQ trigger and polarity defines

2018-01-14T20:11:54+00:00

MP_IRQDIR_* constants pointed in the right direction but remained unused so
far: It's cleaner to use symbolic values for the IRQ flags in the MP config
table. That also saves some comments.

Signed-off-by: Jan Kiszka 
Signed-off-by: Thomas Gleixner 
Cc: jailhouse-dev@googlegroups.com
Link: https://lkml.kernel.org/r/60809926663a1d38e2a5db47d020d6e2e7a70019.1511770314.git.jan.kiszka@siemens.com

x86/boot: Fix boot failure when SMP MP-table is based at 0

2017-11-17T14:30:33+00:00

When crosvm is used to boot a kernel as a VM, the SMP MP-table is found
at physical address 0x0. This causes mpf_base to be set to 0 and a
subsequent "if (!mpf_base)" check in default_get_smp_config() results in
the MP-table not being parsed.  Further into the boot this results in an
oops when attempting a read_apic_id().

Add a boolean variable that is set to true when the MP-table is found.
Use this variable for testing if the MP-table was found so that even a
value of 0 for mpf_base will result in continued parsing of the MP-table.

Fixes: 5997efb96756 ("x86/boot: Use memremap() to map the MPF and MPC data")
Reported-by: Tomeu Vizoso 
Signed-off-by: Tom Lendacky 
Signed-off-by: Thomas Gleixner 
Cc: Peter Zijlstra 
Cc: Borislav Petkov 
Cc: regression@leemhuis.info
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20171106201753.23059.86674.stgit@tlendack-t1.amdoffice.net

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart 
Reviewed-by: Philippe Ombredanne 
Reviewed-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

x86/boot: Use memremap() to map the MPF and MPC data

2017-07-18T09:38:02+00:00

The SMP MP-table is built by UEFI and placed in memory in a decrypted
state. These tables are accessed using a mix of early_memremap(),
early_memunmap(), phys_to_virt() and virt_to_phys(). Change all accesses
to use early_memremap()/early_memunmap(). This allows for proper setting
of the encryption mask so that the data can be successfully accessed when
SME is active.

Signed-off-by: Tom Lendacky 
Reviewed-by: Thomas Gleixner 
Reviewed-by: Borislav Petkov 
Cc: Alexander Potapenko 
Cc: Andrey Ryabinin 
Cc: Andy Lutomirski 
Cc: Arnd Bergmann 
Cc: Borislav Petkov 
Cc: Brijesh Singh 
Cc: Dave Young 
Cc: Dmitry Vyukov 
Cc: Jonathan Corbet 
Cc: Konrad Rzeszutek Wilk 
Cc: Larry Woodman 
Cc: Linus Torvalds 
Cc: Matt Fleming 
Cc: Michael S. Tsirkin 
Cc: Paolo Bonzini 
Cc: Peter Zijlstra 
Cc: Radim Krčmář 
Cc: Rik van Riel 
Cc: Toshimitsu Kani 
Cc: kasan-dev@googlegroups.com
Cc: kvm@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-efi@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/d9464b0d7c861021ed8f494e4a40d6cd10f1eddd.1500319216.git.thomas.lendacky@amd.com
Signed-off-by: Ingo Molnar

x86, mpparse, x86/acpi, x86/PCI, x86/dmi, SFI: Use memremap() for RAM mappings

2017-07-18T09:37:58+00:00

The ioremap() function is intended for mapping MMIO. For RAM, the
memremap() function should be used. Convert calls from ioremap() to
memremap() when re-mapping RAM.

This will be used later by SME to control how the encryption mask is
applied to memory mappings, with certain memory locations being mapped
decrypted vs encrypted.

Signed-off-by: Tom Lendacky 
Reviewed-by: Thomas Gleixner 
Reviewed-by: Borislav Petkov 
Cc: Alexander Potapenko 
Cc: Andrey Ryabinin 
Cc: Andy Lutomirski 
Cc: Arnd Bergmann 
Cc: Borislav Petkov 
Cc: Brijesh Singh 
Cc: Dave Young 
Cc: Dmitry Vyukov 
Cc: Jonathan Corbet 
Cc: Konrad Rzeszutek Wilk 
Cc: Larry Woodman 
Cc: Linus Torvalds 
Cc: Matt Fleming 
Cc: Michael S. Tsirkin 
Cc: Paolo Bonzini 
Cc: Peter Zijlstra 
Cc: Radim Krčmář 
Cc: Rik van Riel 
Cc: Toshimitsu Kani 
Cc: kasan-dev@googlegroups.com
Cc: kvm@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-efi@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/b13fccb9abbd547a7eef7b1fdfc223431b211c88.1500319216.git.thomas.lendacky@amd.com
Signed-off-by: Ingo Molnar