linux-stable.git/arch/x86/kernel/fpu/init.c, branch linux-4.2.y

x86/fpu/math-emu: Fix math-emu boot crash

2015-08-22T08:02:04+00:00

On a math-emu bootup the following crash occurs:

	Initializing CPU#0
	------------[ cut here ]------------
	kernel BUG at arch/x86/kernel/traps.c:779!
	invalid opcode: 0000 [#1] SMP
	[...]
	EIP is at do_device_not_available+0xe/0x70
	[...]
	Call Trace:
	 [] error_code+0x5a/0x60
	 [] ? math_error+0x140/0x140
	 [] ? fpu__init_cpu+0x59/0xa0
	 [] cpu_init+0x202/0x330
	 [] ? __native_set_fixmap+0x1f/0x30
	 [] trap_init+0x305/0x346
	 [] start_kernel+0x1a5/0x35d
	 [] i386_start_kernel+0x82/0x86

The reason is that in the following commit:

  b1276c48e91b ("x86/fpu: Initialize fpregs in fpu__init_cpu_generic()")

I failed to consider math-emu's limitation that it cannot execute the
FNINIT instruction in kernel mode.

The long term fix might be to allow math-emu to execute (certain) kernel
mode FPU instructions, but for now apply the safe (albeit somewhat ugly)
fix: initialize the emulation state explicitly without trapping out to
the FPU emulator.

Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Dave Hansen 
Cc: Denys Vlasenko 
Cc: Fenghua Yu 
Cc: H. Peter Anvin 
Cc: Linus Torvalds 
Cc: Oleg Nesterov 
Cc: Peter Zijlstra 
Cc: Quentin Casasnovas 
Cc: Thomas Gleixner 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar

x86/fpu: Disable dependent CPU features on "noxsave"

2015-07-21T06:20:42+00:00

Complete the set of dependent features that need disabling at
once: XSAVEC, AVX-512 and all currently known to the kernel
extensions to it, as well as MPX need to be disabled too.

Signed-off-by: Jan Beulich 
Cc: Dave Hansen 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/55ACC40D0200007800092E6C@mail.emea.novell.com
Signed-off-by: Ingo Molnar

x86/fpu, sched: Introduce CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and use it on x86

2015-07-18T01:42:51+00:00

Don't burden architectures without dynamic task_struct sizing
with the overhead of dynamic sizing.

Also optimize the x86 code a bit by caching task_struct_size.

Acked-and-Tested-by: Dave Hansen 
Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Dave Hansen 
Cc: Denys Vlasenko 
Cc: Linus Torvalds 
Cc: Oleg Nesterov 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/1437128892-9831-3-git-send-email-mingo@kernel.org
Signed-off-by: Ingo Molnar

x86/fpu, sched: Dynamically allocate 'struct fpu'

2015-07-18T01:42:35+00:00

The FPU rewrite removed the dynamic allocations of 'struct fpu'.
But, this potentially wastes massive amounts of memory (2k per
task on systems that do not have AVX-512 for instance).

Instead of having a separate slab, this patch just appends the
space that we need to the 'task_struct' which we dynamically
allocate already.  This saves from doing an extra slab
allocation at fork().

The only real downside here is that we have to stick everything
and the end of the task_struct.  But, I think the
BUILD_BUG_ON()s I stuck in there should keep that from being too
fragile.

Signed-off-by: Dave Hansen 
Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Dave Hansen 
Cc: Denys Vlasenko 
Cc: H. Peter Anvin 
Cc: Linus Torvalds 
Cc: Oleg Nesterov 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/1437128892-9831-2-git-send-email-mingo@kernel.org
Signed-off-by: Ingo Molnar

x86/fpu: Fix boot crash in the early FPU code

2015-07-04T08:05:56+00:00

Jan Kara and Thomas Gleixner reported boot crashes in the FPU
code:

  general protection fault: 0000 [#1] SMP
  RIP: 0010:[]  [] mxcsr_feature_mask_init+0x1c/0x40

  2b:*  0f ae 85 00 fe ff ff    fxsave -0x200(%rbp)

and bisected it down to the following FPU commit:

   91a8c2a5b43f ("x86/fpu: Clean up and fix MXCSR handling")

The reason is that the on-stack FPU registers state variable,
used by the FXSAVE instruction, did not have the required
minimum alignment of 16 bytes, causing the general protection
fault.

This is most likely a GCC bug in older GCC versions, but the
offending commit also added a bogus extra 32-byte alignment
(which GCC ignored too).

So fix this bug by making the variable static again, but also
mark it __initdata this time, because fpu__init_system_mxcsr()
is now an __init function.

Reported-and-bisected-by: Jan Kara 
Reported-bisected-and-tested-by: Thomas Gleixner 
Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Dave Hansen 
Cc: Denys Vlasenko 
Cc: Fenghua Yu 
Cc: H. Peter Anvin 
Cc: Jan Kara 
Cc: Linus Torvalds 
Cc: Oleg Nesterov 
Cc: Peter Zijlstra 
Cc: Quentin Casasnovas 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/20150704075819.GA9201@gmail.com
Signed-off-by: Ingo Molnar

Merge branch 'x86/urgent' into x86/fpu, to resolve a conflict

2015-05-20T10:01:01+00:00

Conflicts:
	arch/x86/kernel/i387.c

This commit is conflicting:

  e88221c50cad ("x86/fpu: Disable XSAVES* support for now")

These functions changed a lot, move the quirk to arch/x86/kernel/fpu/init.c's
fpu__init_system_xstate_size_legacy().

Signed-off-by: Ingo Molnar

x86/fpu/init: Clean up and comment the __setup() functions

2015-05-20T09:39:35+00:00

Explain the functions and also standardize their style
and naming.

No change in functionality.

Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Dave Hansen 
Cc: Fenghua Yu 
Cc: H. Peter Anvin 
Cc: Linus Torvalds 
Cc: Oleg Nesterov 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar

x86/fpu/init: Move __setup() functions to fpu/init.c

2015-05-20T09:35:42+00:00

We had a number of FPU init related boot option handlers
in arch/x86/kernel/cpu/common.c - move them over into
arch/x86/kernel/fpu/init.c to have them all in a
single place.

Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Dave Hansen 
Cc: Fenghua Yu 
Cc: H. Peter Anvin 
Cc: Linus Torvalds 
Cc: Oleg Nesterov 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar

x86/fpu: Add CONFIG_X86_DEBUG_FPU=y FPU debugging code

2015-05-19T13:48:12+00:00

There are various internal FPU state debugging checks that never
trigger in practice, but which are useful for FPU code development.

Separate these out into CONFIG_X86_DEBUG_FPU=y, and also add a
couple of new ones.

The size difference is about 0.5K of code on defconfig:

   text        data     bss          filename
   15028906    2578816  1638400      vmlinux
   15029430    2578816  1638400      vmlinux

( Keep this enabled by default until the new FPU code is debugged. )

Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Dave Hansen 
Cc: Fenghua Yu 
Cc: H. Peter Anvin 
Cc: Linus Torvalds 
Cc: Oleg Nesterov 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Signed-off-by: Ingo Molnar

x86/fpu/init: Propagate __init annotations

2015-05-19T13:48:11+00:00

Now that all the FPU init function call dependencies are
cleaned up we can propagate __init annotations deeper.

This shrinks the runtime size of the kernel a bit, and
also addresses a few section warnings.

Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Dave Hansen 
Cc: Fenghua Yu 
Cc: H. Peter Anvin 
Cc: Linus Torvalds 
Cc: Oleg Nesterov 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Signed-off-by: Ingo Molnar