linux-stable.git/arch/x86/kernel/devicetree.c, branch v3.0

x86: devicetree: Add missing early_init_dt_setup_initrd_arch stub

2011-06-09T13:39:43+00:00

This patch fixes the following build failure:

drivers/built-in.o: In function `early_init_dt_check_for_initrd':
/home/florian/dev/kernel/x86/linux-2.6-x86/drivers/of/fdt.c:571:
undefined reference to `early_init_dt_setup_initrd_arch'
make: *** [.tmp_vmlinux1] Error 1

which happens as soon as we enable initrd support on a x86 devicetree
platform such as Intel CE4100.

Signed-off-by: Florian Fainelli 
Acked-by: Grant Likely 
Cc: Maxime Bizon 
Acked-by: Sebastian Andrzej Siewior 
Cc: stable@kernel.org # 2.6.39
Link: http://lkml.kernel.org/r/201106061015.50039.ffainelli@freebox.fr
Signed-off-by: Thomas Gleixner

x86, ioapic: Consolidate gsi routing info into 'struct ioapic'

2011-05-20T11:41:01+00:00

Signed-off-by: Suresh Siddha 
Cc: daniel.blueman@gmail.com
Link: http://lkml.kernel.org/r/20110518233157.994002011@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Ingo Molnar

x86, ioapic: Consolidate mp_ioapics[] into 'struct ioapic'

2011-05-20T11:40:59+00:00

Signed-off-by: Suresh Siddha 
Cc: daniel.blueman@gmail.com
Link: http://lkml.kernel.org/r/20110518233157.909013179@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Ingo Molnar

x86: devicetree: Configure IOAPIC pin only once

2011-04-28T09:38:30+00:00

We use io_apic_setup_irq_pin() in order to configure pin's interrupt
number polarity and type. This is done on every irq_create_of_mapping()
which happens for instance during pci enable calls. Level typed
interrupts are masked by default, edge are unmasked.

On the first ->xlate() call the level interrupt is configured and
masked. The driver calls request_irq() and the line is unmasked. Lets
assume the interrupt line is shared with another device and we call
pci_enable_device() for this device. The ->xlate() configures the pin
again and it is masked. request_irq() does not unmask the line because
it _is_ already unmasked according to its internal state. So the
interrupt will never be unmasked again.

This patch is based on an earlier work by Torben Hohn and solves the
problem by configuring the pin only once. Since all devices must agree
on the same type and polarity there is no point in configuring the pin
more than once.

[ tglx: Split out the ce4100 part into a separate patch ]

Cc: Torben Hohn 
Signed-off-by: Sebastian Andrzej Siewior 
Link: http://lkml.kernel.org/r/%3C20110427143052.GA15211%40linutronix.de%3E
Signed-off-by: Thomas Gleixner

x86: DT: Cleanup namespace and call irq_set_irq_type() unconditional

2011-03-24T22:17:56+00:00

That call escaped the name space cleanup. Fix it up.

We really want to call there. The chip might have changed since the
irq was setup initially. So let the core code and the chip decide what
to do. The status is just an unreliable snapshot.

Signed-off-by: Thomas Gleixner 
Cc: Sebastian Andrzej Siewior

x86: DT: Fix return condition in irq_create_of_mapping()

2011-03-24T22:17:56+00:00

The xlate() function returns 0 or a negative error code. Returning the
error code blindly will be seen as an huge irq number by the calling
function because irq_create_of_mapping() returns an unsigned value.

Return 0 (NO_IRQ) as required.

Signed-off-by: Thomas Gleixner 
Cc: Sebastian Andrzej Siewior

x86: dt: Cleanup local apic setup

2011-02-25T15:18:52+00:00

Up to now we force enable the local apic in the devicetree setup
uncoditionally and set smp_found_config unconditionally to 1 when a
devicetree blob is available. This breaks, when local apic is disabled
in the Kconfig.

Make it consistent by initializing device tree explicitely before
smp_get_config() so a non lapic configuration could be used as well.
To be functional that would require to implement PIT as an interrupt
host, but the only user of this code until now is ce4100 which
requires apics to be available. So we leave this up to those who need
it.

Tested-by: Sebastian Siewior 
Signed-off-by: Thomas Gleixner

x86: dt: Fix OLPC=y/INTEL_CE=n build

2011-02-24T12:01:59+00:00

Both OLPC and CE4100 activate CONFIG_OF. OLPC uses PROMTREE while CE
uses FLATTREE. Compiling for OLPC only breaks due to missing flat tree
functions and variables.

Use proper wrappers and provide an empty x86_flattree_get_config()
inline so OF=y FLATTREE=n builds and works.

[ tglx: Make it work with HPET_TIMER=n and make a function static ]

Signed-off-by: Sebastian Andrzej Siewior 
Signed-off-by: Thomas Gleixner

x86: ioapic: Add OF bindings for IO_APIC

2011-02-23T21:27:54+00:00

ioapic_xlate provides a translation from the information in device tree
to ioapic related informations. This includes
- obtaining hw irq which is the vector number "=> pin number + gsi"
- obtaining type (level/edge/..)
- programming this information into ioapic

ioapic_add_ofnode adds an irq_domain based on informations from the device
tree. This information (irq_domain) is required in order to map a device to
its proper interrupt controller.

[ tglx: Adapted to the io_apic changes, which let us move that whole code
  	to devicetree.c ]

Signed-off-by: Sebastian Andrzej Siewior 
Signed-off-by: Dirk Brandewie 
Acked-by: Grant Likely 
Cc: sodaville@linutronix.de
Cc: devicetree-discuss@lists.ozlabs.org
LKML-Reference: <1298405266-1624-10-git-send-email-bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner

x86: dtb: Add generic bus probe

2011-02-23T21:27:54+00:00

For now we probe these busses and we change this to board dependent
probes once we have to.

Signed-off-by: Sebastian Andrzej Siewior 
Signed-off-by: Dirk Brandewie 
Acked-by: Grant Likely 
Cc: sodaville@linutronix.de
Cc: devicetree-discuss@lists.ozlabs.org
LKML-Reference: <1298405266-1624-9-git-send-email-bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner