Root partitions running on MSHV currently attempt ACPI power-off, which
MSHV intercepts and triggers a Machine Check Exception (MCE), leading
to a kernel panic.

Root partitions panic with a trace similar to:

  [   81.306348] reboot: Power down
  [   81.314709] mce: [Hardware Error]: CPU 0: Machine Check Exception: 4 Bank 0: b2000000c0060001
  [   81.314711] mce: [Hardware Error]: TSC 3b8cb60a66 PPIN 11d98332458e4ea9
  [   81.314713] mce: [Hardware Error]: PROCESSOR 0:606a6 TIME 1759339405 SOCKET 0 APIC 0 microcode ffffffff
  [   81.314715] mce: [Hardware Error]: Run the above through 'mcelog --ascii'
  [   81.314716] mce: [Hardware Error]: Machine check: Processor context corrupt
  [   81.314717] Kernel panic - not syncing: Fatal machine check

To avoid this, configure the sleep state in the hypervisor and invoke
the HVCALL_ENTER_SLEEP_STATE hypercall as the final step in the shutdown
sequence. This ensures a clean and safe shutdown of the root partition.

Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Co-developed-by: Anatol Belski <anbelski@linux.microsoft.com>
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <easwar.hariharan@linux.microsoft.com>
Acked-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>

Rename hv_machine_crash_shutdown to more appropriate
hv_guest_crash_shutdown and make it applicable to guests only. This
in preparation for the subsequent hypervisor root crash support
patches.

Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>

./arch/x86/kernel/cpu/mshyperv.c: asm/msr.h is included more than once.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=26164
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>

hv_set_non_nested_msr() has special handling for SINT MSRs
when a paravisor is present. In addition to updating the MSR on the
host, the mirror MSR in the paravisor is updated, including with the
proxy bit. But with Confidential VMBus, the proxy bit must not be
used, so add a special case to skip it.

Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>

The existing Hyper-V wrappers for getting and setting MSRs are
hv_get/set_msr(). Via hv_get/set_non_nested_msr(), they detect
when running in a CoCo VM with a paravisor, and use the TDX or
SNP guest-host communication protocol to bypass the paravisor
and go directly to the host hypervisor for SynIC MSRs. The "set"
function also implements the required special handling for the
SINT MSRs.

Provide functions that allow manipulating the SynIC registers
through the paravisor. Move vmbus_signal_eom() to a more
appropriate location (which also avoids breaking KVM).

Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>

Confidential VMBus requires enabling paravisor SynIC, and
the x86_64 guest has to inspect the Virtualization Stack (VS)
CPUID leaf to see if Confidential VMBus is available. If it is,
the guest shall enable the paravisor SynIC.

Read the relevant data from the VS CPUID leaf. Refactor the
code to avoid repeating CPUID and add flags to the struct
ms_hyperv_info. For ARM64, the flag for Confidential VMBus
is not set which provides the desired behaviour for now as
it is not available on ARM64 just yet. Once ARM64 CCA guests
are supported, this flag will be set unconditionally when
running such a guest.

Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>

Hyper-V doesn't support auto-eoi with Secure AVIC.
So set the HV_DEPRECATING_AEOI_RECOMMENDED flag
to force writing the EOI register after handling an interrupt.

Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>

Pull more x86 updates from Borislav Petkov:

 - Remove a bunch of asm implementing condition flags testing in KVM's
   emulator in favor of int3_emulate_jcc() which is written in C

 - Replace KVM fastops with C-based stubs which avoids problems with the
   fastop infra related to latter not adhering to the C ABI due to their
   special calling convention and, more importantly, bypassing compiler
   control-flow integrity checking because they're written in asm

 - Remove wrongly used static branches and other ugliness accumulated
   over time in hyperv's hypercall implementation with a proper static
   function call to the correct hypervisor call variant

 - Add some fixes and modifications to allow running FRED-enabled
   kernels in KVM even on non-FRED hardware

 - Add kCFI improvements like validating indirect calls and prepare for
   enabling kCFI with GCC. Add cmdline params documentation and other
   code cleanups

 - Use the single-byte 0xd6 insn as the official #UD single-byte
   undefined opcode instruction as agreed upon by both x86 vendors

 - Other smaller cleanups and touchups all over the place

* tag 'x86_core_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  x86,retpoline: Optimize patch_retpoline()
  x86,ibt: Use UDB instead of 0xEA
  x86/cfi: Remove __noinitretpoline and __noretpoline
  x86/cfi: Add "debug" option to "cfi=" bootparam
  x86/cfi: Standardize on common "CFI:" prefix for CFI reports
  x86/cfi: Document the "cfi=" bootparam options
  x86/traps: Clarify KCFI instruction layout
  compiler_types.h: Move __nocfi out of compiler-specific header
  objtool: Validate kCFI calls
  x86/fred: KVM: VMX: Always use FRED for IRQs when CONFIG_X86_FRED=y
  x86/fred: Play nice with invoking asm_fred_entry_from_kvm() on non-FRED hardware
  x86/fred: Install system vector handlers even if FRED isn't fully enabled
  x86/hyperv: Use direct call to hypercall-page
  x86/hyperv: Clean up hv_do_hypercall()
  KVM: x86: Remove fastops
  KVM: x86: Convert em_salc() to C
  KVM: x86: Introduce EM_ASM_3WCL
  KVM: x86: Introduce EM_ASM_1SRC2
  KVM: x86: Introduce EM_ASM_2CL
  KVM: x86: Introduce EM_ASM_2W
  ...

The HV_ACCESS_TSC_INVARIANT bit is always zero when Linux runs as the
root partition. The root partition will see directly what the hardware
provides.

The old logic in ms_hyperv_init_platform caused the native TSC clock
source to be incorrectly marked as unstable on x86. Fix it.

Skip the unnecessary checks in code for the root partition. Add one
extra comment in code to clarify the behavior.

Reviewed-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>

What used to be a simple few instructions has turned into a giant mess
(for x86_64). Not only does it use static_branch wrong, it mixes it
with dynamic branches for no apparent reason.

Notably it uses static_branch through an out-of-line function call,
which completely defeats the purpose, since instead of a simple
JMP/NOP site, you get a CALL+RET+TEST+Jcc sequence in return, which is
absolutely idiotic.

Add to that a dynamic test of hyperv_paravisor_present, something
which is set once and never changed.

Replace all this idiocy with a single direct function call to the
right hypercall variant.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://lkml.kernel.org/r/20250714103440.897136093@infradead.org