linux-stable.git/arch/x86/kernel/cpu/mshyperv.c, branch linux-4.8.y

x86/kernel: Audit and remove any unnecessary uses of module.h

2016-07-14T13:06:41+00:00

Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends.  That changed
when we forked out support for the latter into the export.h file.

This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig.  The advantage
in doing so is that module.h itself sources about 15 other headers;
adding significantly to what we feed cpp, and it can obscure what
headers we are effectively using.

Since module.h was the source for init.h (for __init) and for
export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance
for the presence of either and replace as needed.  Build testing
revealed some implicit header usage that was fixed up accordingly.

Note that some bool/obj-y instances remain since module.h is
the header for some exception table entry stuff, and for things
like __init_or_module (code that is tossed when MODULES=n).

Signed-off-by: Paul Gortmaker 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/20160714001901.31603-4-paul.gortmaker@windriver.com
Signed-off-by: Ingo Molnar

x86/hyperv: Avoid reporting bogus NMI status for Gen2 instances

2016-04-16T09:18:21+00:00

Generation2 instances don't support reporting the NMI status on port 0x61,
read from there returns 'ff' and we end up reporting nonsensical PCI
error (as there is no PCI bus in these instances) on all NMIs:

    NMI: PCI system error (SERR) for reason ff on CPU 0.
    Dazed and confused, but trying to continue

Fix the issue by overriding x86_platform.get_nmi_reason. Use 'booted on
EFI' flag to detect Gen2 instances.

Signed-off-by: Vitaly Kuznetsov 
Cc: Alexander Shishkin 
Cc: Arnaldo Carvalho de Melo 
Cc: Cathy Avery 
Cc: Haiyang Zhang 
Cc: Jiri Olsa 
Cc: K. Y. Srinivasan 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: devel@linuxdriverproject.org
Link: http://lkml.kernel.org/r/1460728232-31433-1-git-send-email-vkuznets@redhat.com
Signed-off-by: Ingo Molnar

x86/cpu: Convert printk(KERN_ ...) to pr_(...)

2016-02-03T09:30:03+00:00

 - Use the more current logging style pr_(...) instead of the old
   printk(KERN_ ...).

 - Convert pr_warning() to pr_warn().

Signed-off-by: Chen Yucong 
Cc: Borislav Petkov 
Cc: H. Peter Anvin 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/1454384702-21707-1-git-send-email-slaoub@gmail.com
Signed-off-by: Ingo Molnar

x86/hyperv: Fix the build in the !CONFIG_KEXEC_CORE case

2015-09-30T05:44:15+00:00

Recent changes in the Hyper-V driver:

  b4370df2b1f5 ("Drivers: hv: vmbus: add special crash handler")

broke the build when CONFIG_KEXEC_CORE is not set:

  arch/x86/built-in.o: In function `hv_machine_crash_shutdown':
  arch/x86/kernel/cpu/mshyperv.c:112: undefined reference to `native_machine_crash_shutdown'

Decorate all kexec related code with #ifdef CONFIG_KEXEC_CORE.

Reported-by: Jim Davis 
Reported-by: Stephen Hemminger 
Signed-off-by: Vitaly Kuznetsov 
Signed-off-by: Thomas Gleixner 
Cc: devel@linuxdriverproject.org
Cc: K. Y. Srinivasan 
Cc: Haiyang Zhang 
Cc: Greg Kroah-Hartman 
Cc: Peter Zijlstra 
Cc: Linus Torvalds 
Link: http://lkml.kernel.org/r/1443002577-25370-1-git-send-email-vkuznets@redhat.com
Signed-off-by: Ingo Molnar

Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2015-09-01T17:33:31+00:00

Pull x86 core platform updates from Ingo Molnar:
 "The main changes are:

   - Intel Atom platform updates.  (Andy Shevchenko)

   - modularity fixlets.  (Paul Gortmaker)

   - x86 platform clockevents driver updates for lguest, uv and Xen.
     (Viresh Kumar)

   - Microsoft Hyper-V TSC fixlet.  (Vitaly Kuznetsov)"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform: Make atom/pmc_atom.c explicitly non-modular
  x86/hyperv: Mark the Hyper-V TSC as unstable
  x86/xen/time: Migrate to new set-state interface
  x86/uv/time: Migrate to new set-state interface
  x86/lguest/timer: Migrate to new set-state interface
  x86/pci/intel_mid_pci: Use proper constants for irq polarity
  x86/pci/intel_mid_pci: Make intel_mid_pci_ops static
  x86/pci/intel_mid_pci: Propagate actual return code
  x86/pci/intel_mid_pci: Work around for IRQ0 assignment
  x86/platform/iosf_mbi: Add Intel Tangier PCI id
  x86/platform/iosf_mbi: Source cleanup
  x86/platform/iosf_mbi: Remove NULL pointer checks for pci_dev_put()
  x86/platform/iosf_mbi: Check return value of debugfs_create properly
  x86/platform/iosf_mbi: Move to dedicated folder
  x86/platform/intel/pmc_atom: Move the PMC-Atom code to arch/x86/platform/atom
  x86/platform/intel/pmc_atom: Add Cherrytrail PMC interface
  x86/platform/intel/pmc_atom: Supply register mappings via PMC object
  x86/platform/intel/pmc_atom: Print index of device in loop
  x86/platform/intel/pmc_atom: Export accessors to PMC registers

x86/hyperv: Mark the Hyper-V TSC as unstable

2015-08-21T06:44:38+00:00

The Hyper-V top-level functional specification states, that
"algorithms should be resilient to sudden jumps forward or
backward in the TSC value", this means that we should consider
TSC as unstable. In some cases tsc tests are able to detect the
instability, it was detected in 543 out of 646 boots in my
testing:

 Measured 6277 cycles TSC warp between CPUs, turning off TSC clock.
 tsc: Marking TSC unstable due to check_tsc_sync_source failed

This is, however, just a heuristic. On Hyper-V platform there
are two good clocksources: MSR-based hyperv_clocksource and
recently introduced TSC page.

Signed-off-by: Vitaly Kuznetsov 
Cc: Haiyang Zhang 
Cc: K. Y. Srinivasan 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: devel@linuxdriverproject.org
Link: http://lkml.kernel.org/r/1440003264-9949-1-git-send-email-vkuznets@redhat.com
Signed-off-by: Ingo Molnar

mshyperv: fix recognition of Hyper-V guest crash MSR's

2015-08-05T05:30:44+00:00

Hypervisor Top Level Functional Specification v3.1/4.0 notes that cpuid
(0x40000003) EDX's 10th bit should be used to check that Hyper-V guest
crash MSR's functionality available.

This patch should fix this recognition. Currently the code checks EAX
register instead of EDX.

Signed-off-by: Andrey Smetanin 
Signed-off-by: Denis V. Lunev 
Signed-off-by: K. Y. Srinivasan 
Signed-off-by: Greg Kroah-Hartman

Drivers: hv: vmbus: add special crash handler

2015-08-05T05:28:38+00:00

Full kernel hang is observed when kdump kernel starts after a crash. This
hang happens in vmbus_negotiate_version() function on
wait_for_completion() as Hyper-V host (Win2012R2 in my testing) never
responds to CHANNELMSG_INITIATE_CONTACT as it thinks the connection is
already established. We need to perform some mandatory minimalistic
cleanup before we start new kernel.

Reported-by: K. Y. Srinivasan 
Signed-off-by: Vitaly Kuznetsov 
Signed-off-by: K. Y. Srinivasan 
Signed-off-by: Greg Kroah-Hartman

Drivers: hv: vmbus: add special kexec handler

2015-08-05T05:25:29+00:00

When general-purpose kexec (not kdump) is being performed in Hyper-V guest
the newly booted kernel fails with an MCE error coming from the host. It
is the same error which was fixed in the "Drivers: hv: vmbus: Implement
the protocol for tearing down vmbus state" commit - monitor pages remain
special and when they're being written to (as the new kernel doesn't know
these pages are special) bad things happen. We need to perform some
minimalistic cleanup before booting a new kernel on kexec. To do so we
need to register a special machine_ops.shutdown handler to be executed
before the native_machine_shutdown(). Registering a shutdown notification
handler via the register_reboot_notifier() call is not sufficient as it
happens to early for our purposes. machine_ops is not being exported to
modules (and I don't think we want to export it) so let's do this in
mshyperv.c

The minimalistic cleanup consists of cleaning up clockevents, synic MSRs,
guest os id MSR, and hypercall MSR.

Kdump doesn't require all this stuff as it lives in a separate memory
space.

Signed-off-by: Vitaly Kuznetsov 
Signed-off-by: K. Y. Srinivasan 
Signed-off-by: Greg Kroah-Hartman

x86: Use entering[_ack]_irq() instead of open coding it

2015-05-15T14:03:18+00:00

Signed-off-by: Thomas Gleixner