linux-stable.git/arch/x86/kernel/cpu/mcheck, branch v4.2

Merge branch 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2015-06-23T00:59:09+00:00

Pull x86 core updates from Ingo Molnar:
 "There were so many changes in the x86/asm, x86/apic and x86/mm topics
  in this cycle that the topical separation of -tip broke down somewhat -
  so the result is a more traditional architecture pull request,
  collected into the 'x86/core' topic.

  The topics were still maintained separately as far as possible, so
  bisectability and conceptual separation should still be pretty good -
  but there were a handful of merge points to avoid excessive
  dependencies (and conflicts) that would have been poorly tested in the
  end.

  The next cycle will hopefully be much more quiet (or at least will
  have fewer dependencies).

  The main changes in this cycle were:

   * x86/apic changes, with related IRQ core changes: (Jiang Liu, Thomas
     Gleixner)

     - This is the second and most intrusive part of changes to the x86
       interrupt handling - full conversion to hierarchical interrupt
       domains:

          [IOAPIC domain]   -----
                                 |
          [MSI domain]      --------[Remapping domain] ----- [ Vector domain ]
                                 |   (optional)          |
          [HPET MSI domain] -----                        |
                                                         |
          [DMAR domain]     -----------------------------
                                                         |
          [Legacy domain]   -----------------------------

       This now reflects the actual hardware and allowed us to distangle
       the domain specific code from the underlying parent domain, which
       can be optional in the case of interrupt remapping.  It's a clear
       separation of functionality and removes quite some duct tape
       constructs which plugged the remap code between ioapic/msi/hpet
       and the vector management.

     - Intel IOMMU IRQ remapping enhancements, to allow direct interrupt
       injection into guests (Feng Wu)

   * x86/asm changes:

     - Tons of cleanups and small speedups, micro-optimizations.  This
       is in preparation to move a good chunk of the low level entry
       code from assembly to C code (Denys Vlasenko, Andy Lutomirski,
       Brian Gerst)

     - Moved all system entry related code to a new home under
       arch/x86/entry/ (Ingo Molnar)

     - Removal of the fragile and ugly CFI dwarf debuginfo annotations.
       Conversion to C will reintroduce many of them - but meanwhile
       they are only getting in the way, and the upstream kernel does
       not rely on them (Ingo Molnar)

     - NOP handling refinements. (Borislav Petkov)

   * x86/mm changes:

     - Big PAT and MTRR rework: making the code more robust and
       preparing to phase out exposing direct MTRR interfaces to drivers -
       in favor of using PAT driven interfaces (Toshi Kani, Luis R
       Rodriguez, Borislav Petkov)

     - New ioremap_wt()/set_memory_wt() interfaces to support
       Write-Through cached memory mappings.  This is especially
       important for good performance on NVDIMM hardware (Toshi Kani)

   * x86/ras changes:

     - Add support for deferred errors on AMD (Aravind Gopalakrishnan)

       This is an important RAS feature which adds hardware support for
       poisoned data.  That means roughly that the hardware marks data
       which it has detected as corrupted but wasn't able to correct, as
       poisoned data and raises an APIC interrupt to signal that in the
       form of a deferred error.  It is the OS's responsibility then to
       take proper recovery action and thus prolonge system lifetime as
       far as possible.

     - Add support for Intel "Local MCE"s: upcoming CPUs will support
       CPU-local MCE interrupts, as opposed to the traditional system-
       wide broadcasted MCE interrupts (Ashok Raj)

     - Misc cleanups (Borislav Petkov)

   * x86/platform changes:

     - Intel Atom SoC updates

  ... and lots of other cleanups, fixlets and other changes - see the
  shortlog and the Git log for details"

* 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (222 commits)
  x86/hpet: Use proper hpet device number for MSI allocation
  x86/hpet: Check for irq==0 when allocating hpet MSI interrupts
  x86/mm/pat, drivers/infiniband/ipath: Use arch_phys_wc_add() and require PAT disabled
  x86/mm/pat, drivers/media/ivtv: Use arch_phys_wc_add() and require PAT disabled
  x86/platform/intel/baytrail: Add comments about why we disabled HPET on Baytrail
  genirq: Prevent crash in irq_move_irq()
  genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain
  iommu, x86: Properly handle posted interrupts for IOMMU hotplug
  iommu, x86: Provide irq_remapping_cap() interface
  iommu, x86: Setup Posted-Interrupts capability for Intel iommu
  iommu, x86: Add cap_pi_support() to detect VT-d PI capability
  iommu, x86: Avoid migrating VT-d posted interrupts
  iommu, x86: Save the mode (posted or remapped) of an IRTE
  iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip
  iommu: dmar: Provide helper to copy shared irte fields
  iommu: dmar: Extend struct irte for VT-d Posted-Interrupts
  iommu: Add new member capability to struct irq_remap_ops
  x86/asm/entry/64: Disentangle error_entry/exit gsbase/ebx/usermode code
  x86/asm/entry/32: Shorten __audit_syscall_entry() args preparation
  x86/asm/entry/32: Explain reloading of registers after __audit_syscall_entry()
  ...

Merge branch 'x86/ras' into x86/core, to fix conflicts

2015-06-07T13:35:27+00:00

Conflicts:
	arch/x86/include/asm/irq_vectors.h

Signed-off-by: Ingo Molnar

x86/mce: Handle Local MCE events

2015-06-07T13:33:15+00:00

Add the necessary changes to do_machine_check() to be able to
process MCEs signaled as local MCEs. Typically, only recoverable
errors (SRAR type) will be Signaled as LMCE. The architecture
does not restrict to only those errors, however.

When errors are signaled as LMCE, there is no need for the MCE
handler to perform rendezvous with other logical processors
unlike earlier processors that would broadcast machine check
errors.

Signed-off-by: Ashok Raj 
Signed-off-by: Borislav Petkov 
Cc: Andrew Morton 
Cc: H. Peter Anvin 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: linux-edac 
Link: http://lkml.kernel.org/r/1433436928-31903-17-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar

x86/mce: Add infrastructure to support Local MCE

2015-06-07T13:33:14+00:00

Initialize and prepare for handling LMCEs. Add a boot-time
option to disable LMCEs.

Signed-off-by: Ashok Raj 
[ Simplify stuff, align statements for better readability, reflow comments; kill
  unused lmce_clear(); save us an MSR write if LMCE is already enabled. ]
Signed-off-by: Borislav Petkov 
Cc: Andrew Morton 
Cc: H. Peter Anvin 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: linux-edac 
Link: http://lkml.kernel.org/r/1433436928-31903-16-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar

Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu

2015-06-02T06:18:34+00:00

Pull RCU changes from Paul E. McKenney:

  - Initialization/Kconfig updates: hide most Kconfig options from unsuspecting users.
    There's now a single high level configuration option:

      *
      * RCU Subsystem
      *
      Make expert-level adjustments to RCU configuration (RCU_EXPERT) [N/y/?] (NEW)

    Which if answered in the negative, leaves us with a single interactive
    configuration option:

      Offload RCU callback processing from boot-selected CPUs (RCU_NOCB_CPU) [N/y/?] (NEW)

    All the rest of the RCU options are configured automatically.

  - Remove all uses of RCU-protected array indexes: replace the
    rcu_[access|dereference]_index_check() APIs with READ_ONCE() and rcu_lockdep_assert().

  - RCU CPU-hotplug cleanups.

  - Updates to Tiny RCU: a race fix and further code shrinkage.

  - RCU torture-testing updates: fixes, speedups, cleanups and
    documentation updates.

  - Miscellaneous fixes.

  - Documentation updates.

Signed-off-by: Ingo Molnar

mce: mce_chrdev_write() can be static

2015-05-27T19:56:17+00:00

Signed-off-by: Fengguang Wu 
Signed-off-by: Paul E. McKenney

mce: Stop using array-index-based RCU primitives

2015-05-27T19:56:16+00:00

Because mce is arch-specific x86 code, there is little or no
performance benefit of using rcu_dereference_index_check() over using
smp_load_acquire().  It also turns out that mce is the only place that
array-index-based RCU is used, and it would be convenient to drop
this portion of the RCU API.

This patch therefore changes rcu_dereference_index_check() uses to
smp_load_acquire(), but keeping the lockdep diagnostics, and also
changes rcu_access_index() uses to READ_ONCE().

Signed-off-by: Paul E. McKenney 
Cc: linux-edac@vger.kernel.org
Cc: Tony Luck 
Acked-by: Borislav Petkov

x86/mce: Fix monarch timeout setting through the mce= cmdline option

2015-05-27T12:39:14+00:00

Using "mce=1,10000000" on the kernel cmdline to change the
monarch timeout does not work. The cause is that get_option()
does parse a subsequent comma in the option string and signals
that with a return value. So we don't need to check for a second
comma ourselves.

Signed-off-by: Xie XiuQi 
Signed-off-by: Borislav Petkov 
Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Denys Vlasenko 
Cc: H. Peter Anvin 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Link: http://lkml.kernel.org/r/1432120943-25028-1-git-send-email-xiexiuqi@huawei.com
Link: http://lkml.kernel.org/r/1432628901-18044-19-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar

x86/mce: Fix MCE severity messages

2015-05-18T08:31:22+00:00

Derek noticed that a critical MCE gets reported with the wrong
error type description:

  [Hardware Error]: CPU 34: Machine Check Exception: 5 Bank 9: f200003f000100b0
  [Hardware Error]: RIP !INEXACT! 10: {intel_idle+0xb1/0x170}
  [Hardware Error]: TSC 49587b8e321cb
  [Hardware Error]: PROCESSOR 0:306e4 TIME 1431561296 SOCKET 1 APIC 29
  [Hardware Error]: Some CPUs didn't answer in synchronization
  [Hardware Error]: Machine check: Invalid
				   ^^^^^^^

The last line with 'Invalid' should have printed the high level
MCE error type description we get from mce_severity, i.e.
something like:

  [Hardware Error]: Machine check: Action required: data load error in a user process

this happens due to the fact that mce_no_way_out() iterates over
all MCA banks and possibly overwrites the @msg argument which is
used in the panic printing later.

Change behavior to take the message of only and the (last)
critical MCE it detects.

Reported-by: Derek 
Signed-off-by: Borislav Petkov 
Cc: 
Cc: H. Peter Anvin 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Link: http://lkml.kernel.org/r/1431936437-25286-3-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar

x86/mce/amd: Zap changelog

2015-05-07T10:06:43+00:00

It is useless and git history has it all detailed anyway. Update
copyright while at it.

Signed-off-by: Borislav Petkov 
Cc: Aravind Gopalakrishnan