linux-stable.git/arch/x86/kernel/cpu/cyrix.c, branch linux-4.4.y

x86/cpu: Rename cpu_data.x86_mask to cpu_data.x86_stepping

2020-06-11T07:21:40+00:00

commit b399151cb48db30ad1e0e93dd40d68c6d007b637 upstream.

x86_mask is a confusing name which is hard to associate with the
processor's stepping.

Additionally, correct an indent issue in lib/cpu.c.

[ Backport by Mark Gross to simplify the SRBDS backport ]

Signed-off-by: Jia Zhang 
[ Updated it to more recent kernels. ]
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: bp@alien8.de
Cc: tony.luck@intel.com
Link: http://lkml.kernel.org/r/1514771530-70829-1-git-send-email-qianyue.zj@alibaba-inc.com
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

x86/CPU: Use correct macros for Cyrix calls

2019-11-25T14:54:07+00:00

[ Upstream commit 03b099bdcdf7125d4a63dc9ddeefdd454e05123d ]

There are comments in processor-cyrix.h advising you to _not_ make calls
using the deprecated macros in this style:

  setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80);

This is because it expands the macro into a non-functioning calling
sequence. The calling order must be:

  outb(CX86_CCR2, 0x22);
  inb(0x23);

From the comments:

 * When using the old macros a line like
 *   setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
 * gets expanded to:
 *  do {
 *    outb((CX86_CCR2), 0x22);
 *    outb((({
 *        outb((CX86_CCR2), 0x22);
 *        inb(0x23);
 *    }) | 0x88), 0x23);
 *  } while (0);

The new macros fix this problem, so use them instead.

Signed-off-by: Matthew Whitehead 
Signed-off-by: Borislav Petkov 
Reviewed-by: Andy Lutomirski 
Cc: Greg Kroah-Hartman 
Cc: "H. Peter Anvin" 
Cc: Ingo Molnar 
Cc: Jia Zhang 
Cc: Peter Zijlstra 
Cc: Philippe Ombredanne 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/20180921212041.13096-2-tedheadster@gmail.com
Signed-off-by: Sasha Levin

x86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processors

2019-04-27T07:33:57+00:00

[ Upstream commit 18fb053f9b827bd98cfc64f2a35df8ab19745a1d ]

There are comments in processor-cyrix.h advising you to _not_ make calls
using the deprecated macros in this style:

  setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80);

This is because it expands the macro into a non-functioning calling
sequence. The calling order must be:

  outb(CX86_CCR2, 0x22);
  inb(0x23);

From the comments:

 * When using the old macros a line like
 *   setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
 * gets expanded to:
 *  do {
 *    outb((CX86_CCR2), 0x22);
 *    outb((({
 *        outb((CX86_CCR2), 0x22);
 *        inb(0x23);
 *    }) | 0x88), 0x23);
 *  } while (0);

The new macros fix this problem, so use them instead. Tested on an
actual Geode processor.

Signed-off-by: Matthew Whitehead 
Signed-off-by: Thomas Gleixner 
Cc: luto@kernel.org
Link: https://lkml.kernel.org/r/1552596361-8967-2-git-send-email-tedheadster@gmail.com
Signed-off-by: Sasha Levin

x86/cpufeature: Carve out X86_FEATURE_*

2018-07-17T09:31:44+00:00

commit cd4d09ec6f6c12a2cc3db5b7d8876a325a53545b upstream

Move them to a separate header and have the following
dependency:

  x86/cpufeatures.h <- x86/processor.h <- x86/cpufeature.h

This makes it easier to use the header in asm code and not
include the whole cpufeature.h and add guards for asm.

Suggested-by: H. Peter Anvin 
Signed-off-by: Borislav Petkov 
Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Denys Vlasenko 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/1453842730-28463-5-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar 
Signed-off-by: Srivatsa S. Bhat 
Reviewed-by: Matt Helsley (VMware) 
Reviewed-by: Alexey Makhalov 
Reviewed-by: Bo Gan 
Signed-off-by: Greg Kroah-Hartman

x86: Delete non-required instances of include

2014-01-07T05:25:18+00:00

None of these files are actually using any __init type directives
and hence don't need to include .  Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.

[ hpa: undid incorrect removal from arch/x86/kernel/head_32.S ]

Signed-off-by: Paul Gortmaker 
Link: http://lkml.kernel.org/r/1389054026-12947-1-git-send-email-paul.gortmaker@windriver.com
Signed-off-by: H. Peter Anvin

x86: delete __cpuinit usage from all x86 files

2013-07-14T23:36:56+00:00

The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit  -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings.  In any case, they are temporary and harmless.

This removes all the arch/x86 uses of the __cpuinit macros from
all C files.  x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.

[1] https://lkml.org/lkml/2013/5/20/589

Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: "H. Peter Anvin" 
Cc: x86@kernel.org
Acked-by: Ingo Molnar 
Acked-by: Thomas Gleixner 
Acked-by: H. Peter Anvin 
Signed-off-by: Paul Gortmaker

x86: Get rid of ->hard_math and all the FPU asm fu

2013-06-06T21:32:04+00:00

Reimplement FPU detection code in C and drop old, not-so-recommended
detection method in asm. Move all the relevant stuff into i387.c where
it conceptually belongs. Finally drop cpuinfo_x86.hard_math.

[ hpa: huge thanks to Borislav for taking my original concept patch
  and productizing it ]

[ Boris, note to self: do not use static_cpu_has before alternatives! ]

Signed-off-by: H. Peter Anvin 
Link: http://lkml.kernel.org/r/1367244262-29511-2-git-send-email-bp@alien8.de
Link: http://lkml.kernel.org/r/1365436666-9837-2-git-send-email-bp@alien8.de
Signed-off-by: Borislav Petkov 
Signed-off-by: H. Peter Anvin

x86, cpu: Convert Cyrix coma bug detection

2013-04-02T17:12:54+00:00

... to the new facility.

Signed-off-by: Borislav Petkov 
Link: http://lkml.kernel.org/r/1363788448-31325-5-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin

x86, cpu: mv display_cacheinfo -> cpu_detect_cache_sizes

2009-11-23T19:59:53+00:00

display_cacheinfo() doesn't display anything anymore and it is used to
detect CPU cache sizes. Rename it accordingly.

Signed-off-by: Borislav Petkov 
LKML-Reference: <20091121130145.GA31357@liondog.tnic>
Signed-off-by: H. Peter Anvin

x86/cpu: Clean up various files a bit

2009-07-11T09:24:09+00:00

No code changes except printk levels (although some of the K6
mtrr code might be clearer if there were a few as would
splitting out some of the intel cache code).

Signed-off-by: Alan Cox 
LKML-Reference: 
Signed-off-by: Ingo Molnar