linux-stable.git/arch/x86/include/uapi/asm, branch linux-4.5.y

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2016-01-12T21:22:12+00:00

Pull KVM updates from Paolo Bonzini:
 "PPC changes will come next week.

   - s390: Support for runtime instrumentation within guests, support of
     248 VCPUs.

   - ARM: rewrite of the arm64 world switch in C, support for 16-bit VM
     identifiers.  Performance counter virtualization missed the boat.

   - x86: Support for more Hyper-V features (synthetic interrupt
     controller), MMU cleanups"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (115 commits)
  kvm: x86: Fix vmwrite to SECONDARY_VM_EXEC_CONTROL
  kvm/x86: Hyper-V SynIC timers tracepoints
  kvm/x86: Hyper-V SynIC tracepoints
  kvm/x86: Update SynIC timers on guest entry only
  kvm/x86: Skip SynIC vector check for QEMU side
  kvm/x86: Hyper-V fix SynIC timer disabling condition
  kvm/x86: Reorg stimer_expiration() to better control timer restart
  kvm/x86: Hyper-V unify stimer_start() and stimer_restart()
  kvm/x86: Drop stimer_stop() function
  kvm/x86: Hyper-V timers fix incorrect logical operation
  KVM: move architecture-dependent requests to arch/
  KVM: renumber vcpu->request bits
  KVM: document which architecture uses each request bit
  KVM: Remove unused KVM_REQ_KICK to save a bit in vcpu->requests
  kvm: x86: Check kvm_write_guest return value in kvm_write_wall_clock
  KVM: s390: implement the RI support of guest
  kvm/s390: drop unpaired smp_mb
  kvm: x86: fix comment about {mmu,nested_mmu}.gva_to_gpa
  KVM: x86: MMU: Use clear_page() instead of init_shadow_page_table()
  arm/arm64: KVM: Detect vGIC presence at runtime
  ...

kvm/x86: Hyper-V SynIC timers

2015-12-16T17:49:45+00:00

Per Hyper-V specification (and as required by Hyper-V-aware guests),
SynIC provides 4 per-vCPU timers.  Each timer is programmed via a pair
of MSRs, and signals expiration by delivering a special format message
to the configured SynIC message slot and triggering the corresponding
synthetic interrupt.

Note: as implemented by this patch, all periodic timers are "lazy"
(i.e. if the vCPU wasn't scheduled for more than the timer period the
timer events are lost), regardless of the corresponding configuration
MSR.  If deemed necessary, the "catch up" mode (the timer period is
shortened until the timer catches up) will be implemented later.

Changes v2:
* Use remainder to calculate periodic timer expiration time

Signed-off-by: Andrey Smetanin 
Reviewed-by: Roman Kagan 
CC: Gleb Natapov 
CC: Paolo Bonzini 
CC: "K. Y. Srinivasan" 
CC: Haiyang Zhang 
CC: Vitaly Kuznetsov 
CC: Roman Kagan 
CC: Denis V. Lunev 
CC: qemu-devel@nongnu.org
Signed-off-by: Paolo Bonzini

drivers/hv: Move struct hv_timer_message_payload into UAPI Hyper-V x86 header

2015-12-16T17:49:41+00:00

This struct is required for Hyper-V SynIC timers implementation inside KVM
and for upcoming Hyper-V VMBus support by userspace(QEMU). So place it into
Hyper-V UAPI header.

Signed-off-by: Andrey Smetanin 
CC: Gleb Natapov 
CC: Paolo Bonzini 
CC: "K. Y. Srinivasan" 
CC: Haiyang Zhang 
CC: Vitaly Kuznetsov 
CC: Roman Kagan 
CC: Denis V. Lunev 
CC: qemu-devel@nongnu.org
Signed-off-by: Paolo Bonzini

drivers/hv: Move struct hv_message into UAPI Hyper-V x86 header

2015-12-16T17:49:40+00:00

This struct is required for Hyper-V SynIC timers implementation inside KVM
and for upcoming Hyper-V VMBus support by userspace(QEMU). So place it into
Hyper-V UAPI header.

Signed-off-by: Andrey Smetanin 
Acked-by: K. Y. Srinivasan 
Reviewed-by: Roman Kagan 
CC: Gleb Natapov 
CC: Paolo Bonzini 
CC: "K. Y. Srinivasan" 
CC: Haiyang Zhang 
CC: Vitaly Kuznetsov 
CC: Roman Kagan 
CC: Denis V. Lunev 
CC: qemu-devel@nongnu.org
Signed-off-by: Paolo Bonzini

drivers/hv: Move HV_SYNIC_STIMER_COUNT into Hyper-V UAPI x86 header

2015-12-16T17:49:40+00:00

This constant is required for Hyper-V SynIC timers MSR's
support by userspace(QEMU).

Signed-off-by: Andrey Smetanin 
Acked-by: K. Y. Srinivasan 
Reviewed-by: Roman Kagan 
CC: Gleb Natapov 
CC: Paolo Bonzini 
CC: "K. Y. Srinivasan" 
CC: Haiyang Zhang 
CC: Vitaly Kuznetsov 
CC: Roman Kagan 
CC: Denis V. Lunev 
CC: qemu-devel@nongnu.org
Signed-off-by: Paolo Bonzini

x86/RAS: Remove mce.usable_addr

2015-11-24T08:12:35+00:00

It is useless and we can use the function instead. Besides,
mcelog(8) hasn't managed to make use of it yet. So kill it.

Signed-off-by: Borislav Petkov 
Acked-by: Tony Luck 
Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Denys Vlasenko 
Cc: H. Peter Anvin 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/1448350880-5573-3-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2015-11-12T22:34:06+00:00

Pull second batch of kvm updates from Paolo Bonzini:
 "Four changes:

   - x86: work around two nasty cases where a benign exception occurs
     while another is being delivered.  The endless stream of exceptions
     causes an infinite loop in the processor, which not even NMIs or
     SMIs can interrupt; in the virt case, there is no possibility to
     exit to the host either.

   - x86: support for Skylake per-guest TSC rate.  Long supported by
     AMD, the patches mostly move things from there to common
     arch/x86/kvm/ code.

   - generic: remove local_irq_save/restore from the guest entry and
     exit paths when context tracking is enabled.  The patches are a few
     months old, but we discussed them again at kernel summit.  Andy
     will pick up from here and, in 4.5, try to remove it from the user
     entry/exit paths.

   - PPC: Two bug fixes, see merge commit 370289756becc for details"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
  KVM: x86: rename update_db_bp_intercept to update_bp_intercept
  KVM: svm: unconditionally intercept #DB
  KVM: x86: work around infinite loop in microcode when #AC is delivered
  context_tracking: avoid irq_save/irq_restore on guest entry and exit
  context_tracking: remove duplicate enabled check
  KVM: VMX: Dump TSC multiplier in dump_vmcs()
  KVM: VMX: Use a scaled host TSC for guest readings of MSR_IA32_TSC
  KVM: VMX: Setup TSC scaling ratio when a vcpu is loaded
  KVM: VMX: Enable and initialize VMX TSC scaling
  KVM: x86: Use the correct vcpu's TSC rate to compute time scale
  KVM: x86: Move TSC scaling logic out of call-back read_l1_tsc()
  KVM: x86: Move TSC scaling logic out of call-back adjust_tsc_offset()
  KVM: x86: Replace call-back compute_tsc_offset() with a common function
  KVM: x86: Replace call-back set_tsc_khz() with a common function
  KVM: x86: Add a common TSC scaling function
  KVM: x86: Add a common TSC scaling ratio field in kvm_vcpu_arch
  KVM: x86: Collect information for setting TSC scaling ratio
  KVM: x86: declare a few variables as __read_mostly
  KVM: x86: merge handle_mmio_page_fault and handle_mmio_page_fault_common
  KVM: PPC: Book3S HV: Don't dynamically split core when already split
  ...

KVM: x86: work around infinite loop in microcode when #AC is delivered

2015-11-10T11:06:24+00:00

It was found that a guest can DoS a host by triggering an infinite
stream of "alignment check" (#AC) exceptions.  This causes the
microcode to enter an infinite loop where the core never receives
another interrupt.  The host kernel panics pretty quickly due to the
effects (CVE-2015-5307).

Signed-off-by: Eric Northup 
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2015-11-06T00:26:26+00:00

Pull KVM updates from Paolo Bonzini:
 "First batch of KVM changes for 4.4.

  s390:
     A bunch of fixes and optimizations for interrupt and time handling.

  PPC:
     Mostly bug fixes.

  ARM:
     No big features, but many small fixes and prerequisites including:

      - a number of fixes for the arch-timer

      - introducing proper level-triggered semantics for the arch-timers

      - a series of patches to synchronously halt a guest (prerequisite
        for IRQ forwarding)

      - some tracepoint improvements

      - a tweak for the EL2 panic handlers

      - some more VGIC cleanups getting rid of redundant state

  x86:
     Quite a few changes:

      - support for VT-d posted interrupts (i.e. PCI devices can inject
        interrupts directly into vCPUs).  This introduces a new
        component (in virt/lib/) that connects VFIO and KVM together.
        The same infrastructure will be used for ARM interrupt
        forwarding as well.

      - more Hyper-V features, though the main one Hyper-V synthetic
        interrupt controller will have to wait for 4.5.  These will let
        KVM expose Hyper-V devices.

      - nested virtualization now supports VPID (same as PCID but for
        vCPUs) which makes it quite a bit faster

      - for future hardware that supports NVDIMM, there is support for
        clflushopt, clwb, pcommit

      - support for "split irqchip", i.e.  LAPIC in kernel +
        IOAPIC/PIC/PIT in userspace, which reduces the attack surface of
        the hypervisor

      - obligatory smattering of SMM fixes

      - on the guest side, stable scheduler clock support was rewritten
        to not require help from the hypervisor"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (123 commits)
  KVM: VMX: Fix commit which broke PML
  KVM: x86: obey KVM_X86_QUIRK_CD_NW_CLEARED in kvm_set_cr0()
  KVM: x86: allow RSM from 64-bit mode
  KVM: VMX: fix SMEP and SMAP without EPT
  KVM: x86: move kvm_set_irq_inatomic to legacy device assignment
  KVM: device assignment: remove pointless #ifdefs
  KVM: x86: merge kvm_arch_set_irq with kvm_set_msi_inatomic
  KVM: x86: zero apic_arb_prio on reset
  drivers/hv: share Hyper-V SynIC constants with userspace
  KVM: x86: handle SMBASE as physical address in RSM
  KVM: x86: add read_phys to x86_emulate_ops
  KVM: x86: removing unused variable
  KVM: don't pointlessly leave KVM_COMPAT=y in non-KVM configs
  KVM: arm/arm64: Merge vgic_set_lr() and vgic_sync_lr_elrsr()
  KVM: arm/arm64: Clean up vgic_retire_lr() and surroundings
  KVM: arm/arm64: Optimize away redundant LR tracking
  KVM: s390: use simple switch statement as multiplexer
  KVM: s390: drop useless newline in debugging data
  KVM: s390: SCA must not cross page boundaries
  KVM: arm: Do not indent the arguments of DECLARE_BITMAP
  ...

drivers/hv: share Hyper-V SynIC constants with userspace

2015-11-04T15:24:33+00:00

Moved Hyper-V synic contants from guest Hyper-V drivers private
header into x86 arch uapi Hyper-V header.

Added Hyper-V synic msr's flags into x86 arch uapi Hyper-V header.

Signed-off-by: Andrey Smetanin 
Reviewed-by: Roman Kagan 
Signed-off-by: Denis V. Lunev 
CC: Vitaly Kuznetsov 
CC: "K. Y. Srinivasan" 
CC: Gleb Natapov 
CC: Paolo Bonzini 
Signed-off-by: Paolo Bonzini