linux-stable.git/arch/x86/include/asm/trace, branch v5.2

Merge branch 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2019-05-07T17:24:10+00:00

Pull x86 FPU state handling updates from Borislav Petkov:
 "This contains work started by Rik van Riel and brought to fruition by
  Sebastian Andrzej Siewior with the main goal to optimize when to load
  FPU registers: only when returning to userspace and not on every
  context switch (while the task remains in the kernel).

  In addition, this optimization makes kernel_fpu_begin() cheaper by
  requiring registers saving only on the first invocation and skipping
  that in following ones.

  What is more, this series cleans up and streamlines many aspects of
  the already complex FPU code, hopefully making it more palatable for
  future improvements and simplifications.

  Finally, there's a __user annotations fix from Jann Horn"

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
  x86/fpu: Fault-in user stack if copy_fpstate_to_sigframe() fails
  x86/pkeys: Add PKRU value to init_fpstate
  x86/fpu: Restore regs in copy_fpstate_to_sigframe() in order to use the fastpath
  x86/fpu: Add a fastpath to copy_fpstate_to_sigframe()
  x86/fpu: Add a fastpath to __fpu__restore_sig()
  x86/fpu: Defer FPU state load until return to userspace
  x86/fpu: Merge the two code paths in __fpu__restore_sig()
  x86/fpu: Restore from kernel memory on the 64-bit path too
  x86/fpu: Inline copy_user_to_fpregs_zeroing()
  x86/fpu: Update xstate's PKRU value on write_pkru()
  x86/fpu: Prepare copy_fpstate_to_sigframe() for TIF_NEED_FPU_LOAD
  x86/fpu: Always store the registers in copy_fpstate_to_sigframe()
  x86/entry: Add TIF_NEED_FPU_LOAD
  x86/fpu: Eager switch PKRU state
  x86/pkeys: Don't check if PKRU is zero before writing it
  x86/fpu: Only write PKRU if it is different from current
  x86/pkeys: Provide *pkru() helpers
  x86/fpu: Use a feature number instead of mask in two more helpers
  x86/fpu: Make __raw_xsave_addr() use a feature number instead of mask
  x86/fpu: Add an __fpregs_load_activate() internal helper
  ...

x86/fpu: Defer FPU state load until return to userspace

2019-04-12T17:34:47+00:00

Defer loading of FPU state until return to userspace. This gives
the kernel the potential to skip loading FPU state for tasks that
stay in kernel mode, or for tasks that end up with repeated
invocations of kernel_fpu_begin() & kernel_fpu_end().

The fpregs_lock/unlock() section ensures that the registers remain
unchanged. Otherwise a context switch or a bottom half could save the
registers to its FPU context and the processor's FPU registers would
became random if modified at the same time.

KVM swaps the host/guest registers on entry/exit path. This flow has
been kept as is. First it ensures that the registers are loaded and then
saves the current (host) state before it loads the guest's registers. The
swap is done at the very end with disabled interrupts so it should not
change anymore before theg guest is entered. The read/save version seems
to be cheaper compared to memcpy() in a micro benchmark.

Each thread gets TIF_NEED_FPU_LOAD set as part of fork() / fpu__copy().
For kernel threads, this flag gets never cleared which avoids saving /
restoring the FPU state for kernel threads and during in-kernel usage of
the FPU registers.

 [
   bp: Correct and update commit message and fix checkpatch warnings.
   s/register/registers/ where it is used in plural.
   minor comment corrections.
   remove unused trace_x86_fpu_activate_state() TP.
 ]

Signed-off-by: Rik van Riel 
Signed-off-by: Sebastian Andrzej Siewior 
Signed-off-by: Borislav Petkov 
Reviewed-by: Dave Hansen 
Reviewed-by: Thomas Gleixner 
Cc: Andy Lutomirski 
Cc: Aubrey Li 
Cc: Babu Moger 
Cc: "Chang S. Bae" 
Cc: Dmitry Safonov 
Cc: "H. Peter Anvin" 
Cc: Ingo Molnar 
Cc: Jann Horn 
Cc: "Jason A. Donenfeld" 
Cc: Joerg Roedel 
Cc: Konrad Rzeszutek Wilk 
Cc: kvm ML 
Cc: Nicolai Stange 
Cc: Paolo Bonzini 
Cc: "Radim Krčmář" 
Cc: Tim Chen 
Cc: Waiman Long 
Cc: x86-ml 
Cc: Yi Wang 
Link: https://lkml.kernel.org/r/20190403164156.19645-24-bigeasy@linutronix.de

x86/fpu: Remove fpu->initialized

2019-04-10T13:42:40+00:00

The struct fpu.initialized member is always set to one for user tasks
and zero for kernel tasks. This avoids saving/restoring the FPU
registers for kernel threads.

The ->initialized = 0 case for user tasks has been removed in previous
changes, for instance, by doing an explicit unconditional init at fork()
time for FPU-less systems which was otherwise delayed until the emulated
opcode.

The context switch code (switch_fpu_prepare() + switch_fpu_finish())
can't unconditionally save/restore registers for kernel threads. Not
only would it slow down the switch but also load a zeroed xcomp_bv for
XSAVES.

For kernel_fpu_begin() (+end) the situation is similar: EFI with runtime
services uses this before alternatives_patched is true. Which means that
this function is used too early and it wasn't the case before.

For those two cases, use current->mm to distinguish between user and
kernel thread. For kernel_fpu_begin() skip save/restore of the FPU
registers.

During the context switch into a kernel thread don't do anything. There
is no reason to save the FPU state of a kernel thread.

The reordering in __switch_to() is important because the current()
pointer needs to be valid before switch_fpu_finish() is invoked so ->mm
is seen of the new task instead the old one.

N.B.: fpu__save() doesn't need to check ->mm because it is called by
user tasks only.

 [ bp: Massage. ]

Signed-off-by: Sebastian Andrzej Siewior 
Signed-off-by: Borislav Petkov 
Reviewed-by: Dave Hansen 
Reviewed-by: Thomas Gleixner 
Cc: Andy Lutomirski 
Cc: Aubrey Li 
Cc: Babu Moger 
Cc: "Chang S. Bae" 
Cc: Dmitry Safonov 
Cc: "H. Peter Anvin" 
Cc: Ingo Molnar 
Cc: Jann Horn 
Cc: "Jason A. Donenfeld" 
Cc: Joerg Roedel 
Cc: kvm ML 
Cc: Masami Hiramatsu 
Cc: Mathieu Desnoyers 
Cc: Nicolai Stange 
Cc: Paolo Bonzini 
Cc: Peter Zijlstra 
Cc: Radim Krčmář 
Cc: Rik van Riel 
Cc: Sergey Senozhatsky 
Cc: Will Deacon 
Cc: x86-ml 
Link: https://lkml.kernel.org/r/20190403164156.19645-8-bigeasy@linutronix.de

treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively

2019-04-09T12:19:06+00:00

%pF and %pf are functionally equivalent to %pS and %ps conversion
specifiers. The former are deprecated, therefore switch the current users
to use the preferred variant.

The changes have been produced by the following command:

	git grep -l '%p[fF]' | grep -v '^\(tools\|Documentation\)/' | \
	while read i; do perl -i -pe 's/%pf/%ps/g; s/%pF/%pS/g;' $i; done

And verifying the result.

Link: http://lkml.kernel.org/r/20190325193229.23390-1-sakari.ailus@linux.intel.com
Cc: Andy Shevchenko 
Cc: linux-arm-kernel@lists.infradead.org
Cc: sparclinux@vger.kernel.org
Cc: linux-um@lists.infradead.org
Cc: xen-devel@lists.xenproject.org
Cc: linux-acpi@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: drbd-dev@lists.linbit.com
Cc: linux-block@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-nvdimm@lists.01.org
Cc: linux-pci@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: linux-btrfs@vger.kernel.org
Cc: linux-f2fs-devel@lists.sourceforge.net
Cc: linux-mm@kvack.org
Cc: ceph-devel@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Sakari Ailus 
Acked-by: David Sterba  (for btrfs)
Acked-by: Mike Rapoport  (for mm/memblock.c)
Acked-by: Bjorn Helgaas  (for drivers/pci)
Acked-by: Rafael J. Wysocki 
Signed-off-by: Petr Mladek

Merge branch 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2018-12-27T01:03:51+00:00

Pull x86 cleanups from Ingo Molnar:
 "Misc cleanups"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kprobes: Remove trampoline_handler() prototype
  x86/kernel: Fix more -Wmissing-prototypes warnings
  x86: Fix various typos in comments
  x86/headers: Fix -Wmissing-prototypes warning
  x86/process: Avoid unnecessary NULL check in get_wchan()
  x86/traps: Complete prototype declarations
  x86/mce: Fix -Wmissing-prototypes warnings
  x86/gart: Rewrite early_gart_iommu_check() comment

x86/hyper-v: Add HvFlushGuestAddressList hypercall support

2018-12-21T10:28:39+00:00

Hyper-V provides HvFlushGuestAddressList() hypercall to flush EPT tlb
with specified ranges. This patch is to add the hypercall support.

Reviewed-by:  Michael Kelley 
Signed-off-by: Lan Tianyu 
Signed-off-by: Paolo Bonzini

x86/kernel: Fix more -Wmissing-prototypes warnings

2018-12-08T11:24:35+00:00

... with the goal of eventually enabling -Wmissing-prototypes by
default. At least on x86.

Make functions static where possible, otherwise add prototypes or make
them visible through includes.

asm/trace/ changes courtesy of Steven Rostedt .

Signed-off-by: Borislav Petkov 
Reviewed-by: Masami Hiramatsu 
Reviewed-by: Ingo Molnar 
Acked-by: Rafael J. Wysocki  # ACPI + cpufreq bits
Cc: Andrew Banman 
Cc: Dimitri Sivanich 
Cc: "H. Peter Anvin" 
Cc: Ingo Molnar 
Cc: Masami Hiramatsu 
Cc: Mike Travis 
Cc: "Steven Rostedt (VMware)" 
Cc: Thomas Gleixner 
Cc: Yi Wang 
Cc: linux-acpi@vger.kernel.org

signal/x86: In trace_mpx_bounds_register_exception add __user annotations

2018-09-19T13:52:21+00:00

The value passed in to addr_referenced is of type void __user *, so update
the addr_referenced parameter in trace_mpx_bounds_register_exception to match.

Also update the addr_referenced paramater in TP_STRUCT__entry as it again
holdes the same value.

I don't know why this was missed earlier but sparse was complaining when
testing test branch so fix this now.

Reviewed-by: Thomas Gleixner 
Signed-off-by: "Eric W. Biederman"

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2018-08-19T17:38:36+00:00

Pull first set of KVM updates from Paolo Bonzini:
 "PPC:
   - minor code cleanups

  x86:
   - PCID emulation and CR3 caching for shadow page tables
   - nested VMX live migration
   - nested VMCS shadowing
   - optimized IPI hypercall
   - some optimizations

  ARM will come next week"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (85 commits)
  kvm: x86: Set highest physical address bits in non-present/reserved SPTEs
  KVM/x86: Use CC_SET()/CC_OUT in arch/x86/kvm/vmx.c
  KVM: X86: Implement PV IPIs in linux guest
  KVM: X86: Add kvm hypervisor init time platform setup callback
  KVM: X86: Implement "send IPI" hypercall
  KVM/x86: Move X86_CR4_OSXSAVE check into kvm_valid_sregs()
  KVM: x86: Skip pae_root shadow allocation if tdp enabled
  KVM/MMU: Combine flushing remote tlb in mmu_set_spte()
  KVM: vmx: skip VMWRITE of HOST_{FS,GS}_BASE when possible
  KVM: vmx: skip VMWRITE of HOST_{FS,GS}_SEL when possible
  KVM: vmx: always initialize HOST_{FS,GS}_BASE to zero during setup
  KVM: vmx: move struct host_state usage to struct loaded_vmcs
  KVM: vmx: compute need to reload FS/GS/LDT on demand
  KVM: nVMX: remove a misleading comment regarding vmcs02 fields
  KVM: vmx: rename __vmx_load_host_state() and vmx_save_host_state()
  KVM: vmx: add dedicated utility to access guest's kernel_gs_base
  KVM: vmx: track host_state.loaded using a loaded_vmcs pointer
  KVM: vmx: refactor segmentation code in vmx_save_host_state()
  kvm: nVMX: Fix fault priority for VMX operations
  kvm: nVMX: Fix fault vector for VMX operation at CPL > 0
  ...

X86/Hyper-V: Add hyperv_nested_flush_guest_mapping ftrace support

2018-08-06T15:59:05+00:00

This patch is to add hyperv_nested_flush_guest_mapping support to trace
hvFlushGuestPhysicalAddressSpace hypercall.

Signed-off-by: Lan Tianyu 
Acked-by: K. Y. Srinivasan 
Signed-off-by: Paolo Bonzini