linux-stable.git/arch/unicore32, branch v4.0

mm: vmalloc: pass additional vm_flags to __vmalloc_node_range()

2015-02-14T05:21:42+00:00

For instrumenting global variables KASan will shadow memory backing memory
for modules.  So on module loading we will need to allocate memory for
shadow and map it at address in shadow that corresponds to the address
allocated in module_alloc().

__vmalloc_node_range() could be used for this purpose, except it puts a
guard hole after allocated area.  Guard hole in shadow memory should be a
problem because at some future point we might need to have a shadow memory
at address occupied by guard hole.  So we could fail to allocate shadow
for module_alloc().

Now we have VM_NO_GUARD flag disabling guard page, so we need to pass into
__vmalloc_node_range().  Add new parameter 'vm_flags' to
__vmalloc_node_range() function.

Signed-off-by: Andrey Ryabinin 
Cc: Dmitry Vyukov 
Cc: Konstantin Serebryany 
Cc: Dmitry Chernenkov 
Signed-off-by: Andrey Konovalov 
Cc: Yuri Gribov 
Cc: Konstantin Khlebnikov 
Cc: Sasha Levin 
Cc: Christoph Lameter 
Cc: Joonsoo Kim 
Cc: Dave Hansen 
Cc: Andi Kleen 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: "H. Peter Anvin" 
Cc: Christoph Lameter 
Cc: Pekka Enberg 
Cc: David Rientjes 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

all arches, signal: move restart_block to struct task_struct

2015-02-13T02:54:12+00:00

If an attacker can cause a controlled kernel stack overflow, overwriting
the restart block is a very juicy exploit target.  This is because the
restart_block is held in the same memory allocation as the kernel stack.

Moving the restart block to struct task_struct prevents this exploit by
making the restart_block harder to locate.

Note that there are other fields in thread_info that are also easy
targets, at least on some architectures.

It's also a decent simplification, since the restart code is more or less
identical on all architectures.

[james.hogan@imgtec.com: metag: align thread_info::supervisor_stack]
Signed-off-by: Andy Lutomirski 
Cc: Thomas Gleixner 
Cc: Al Viro 
Cc: "H. Peter Anvin" 
Cc: Ingo Molnar 
Cc: Kees Cook 
Cc: David Miller 
Acked-by: Richard Weinberger 
Cc: Richard Henderson 
Cc: Ivan Kokshaysky 
Cc: Matt Turner 
Cc: Vineet Gupta 
Cc: Russell King 
Cc: Catalin Marinas 
Cc: Will Deacon 
Cc: Haavard Skinnemoen 
Cc: Hans-Christian Egtvedt 
Cc: Steven Miao 
Cc: Mark Salter 
Cc: Aurelien Jacquiot 
Cc: Mikael Starvik 
Cc: Jesper Nilsson 
Cc: David Howells 
Cc: Richard Kuo 
Cc: "Luck, Tony" 
Cc: Geert Uytterhoeven 
Cc: Michal Simek 
Cc: Ralf Baechle 
Cc: Jonas Bonn 
Cc: "James E.J. Bottomley" 
Cc: Helge Deller 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Acked-by: Michael Ellerman  (powerpc)
Tested-by: Michael Ellerman  (powerpc)
Cc: Martin Schwidefsky 
Cc: Heiko Carstens 
Cc: Chen Liqin 
Cc: Lennox Wu 
Cc: Chris Metcalf 
Cc: Guan Xuetao 
Cc: Chris Zankel 
Cc: Max Filippov 
Cc: Oleg Nesterov 
Cc: Guenter Roeck 
Signed-off-by: James Hogan 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: fix false-positive warning on exit due mm_nr_pmds(mm)

2015-02-12T01:06:04+00:00

The problem is that we check nr_ptes/nr_pmds in exit_mmap() which happens
*before* pgd_free().  And if an arch does pte/pmd allocation in
pgd_alloc() and frees them in pgd_free() we see offset in counters by the
time of the checks.

We tried to workaround this by offsetting expected counter value according
to FIRST_USER_ADDRESS for both nr_pte and nr_pmd in exit_mmap().  But it
doesn't work in some cases:

1. ARM with LPAE enabled also has non-zero USER_PGTABLES_CEILING, but
   upper addresses occupied with huge pmd entries, so the trick with
   offsetting expected counter value will get really ugly: we will have
   to apply it nr_pmds, but not nr_ptes.

2. Metag has non-zero FIRST_USER_ADDRESS, but doesn't do allocation
   pte/pmd page tables allocation in pgd_alloc(), just setup a pgd entry
   which is allocated at boot and shared accross all processes.

The proposal is to move the check to check_mm() which happens *after*
pgd_free() and do proper accounting during pgd_alloc() and pgd_free()
which would bring counters to zero if nothing leaked.

Signed-off-by: Kirill A. Shutemov 
Reported-by: Tyler Baker 
Tested-by: Tyler Baker 
Tested-by: Nishanth Menon 
Cc: Russell King 
Cc: James Hogan 
Cc: Guan Xuetao 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

unicore32: drop pte_file()-related helpers

2015-02-10T22:30:33+00:00

We've replaced remap_file_pages(2) implementation with emulation.  Nobody
creates non-linear mapping anymore.

Signed-off-by: Kirill A. Shutemov 
Cc: Guan Xuetao 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2014-12-11T22:27:06+00:00

Pull networking updates from David Miller:

 1) New offloading infrastructure and example 'rocker' driver for
    offloading of switching and routing to hardware.

    This work was done by a large group of dedicated individuals, not
    limited to: Scott Feldman, Jiri Pirko, Thomas Graf, John Fastabend,
    Jamal Hadi Salim, Andy Gospodarek, Florian Fainelli, Roopa Prabhu

 2) Start making the networking operate on IOV iterators instead of
    modifying iov objects in-situ during transfers.  Thanks to Al Viro
    and Herbert Xu.

 3) A set of new netlink interfaces for the TIPC stack, from Richard
    Alpe.

 4) Remove unnecessary looping during ipv6 routing lookups, from Martin
    KaFai Lau.

 5) Add PAUSE frame generation support to gianfar driver, from Matei
    Pavaluca.

 6) Allow for larger reordering levels in TCP, which are easily
    achievable in the real world right now, from Eric Dumazet.

 7) Add a variable of napi_schedule that doesn't need to disable cpu
    interrupts, from Eric Dumazet.

 8) Use a doubly linked list to optimize neigh_parms_release(), from
    Nicolas Dichtel.

 9) Various enhancements to the kernel BPF verifier, and allow eBPF
    programs to actually be attached to sockets.  From Alexei
    Starovoitov.

10) Support TSO/LSO in sunvnet driver, from David L Stevens.

11) Allow controlling ECN usage via routing metrics, from Florian
    Westphal.

12) Remote checksum offload, from Tom Herbert.

13) Add split-header receive, BQL, and xmit_more support to amd-xgbe
    driver, from Thomas Lendacky.

14) Add MPLS support to openvswitch, from Simon Horman.

15) Support wildcard tunnel endpoints in ipv6 tunnels, from Steffen
    Klassert.

16) Do gro flushes on a per-device basis using a timer, from Eric
    Dumazet.  This tries to resolve the conflicting goals between the
    desired handling of bulk vs.  RPC-like traffic.

17) Allow userspace to ask for the CPU upon what a packet was
    received/steered, via SO_INCOMING_CPU.  From Eric Dumazet.

18) Limit GSO packets to half the current congestion window, from Eric
    Dumazet.

19) Add a generic helper so that all drivers set their RSS keys in a
    consistent way, from Eric Dumazet.

20) Add xmit_more support to enic driver, from Govindarajulu
    Varadarajan.

21) Add VLAN packet scheduler action, from Jiri Pirko.

22) Support configurable RSS hash functions via ethtool, from Eyal
    Perry.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1820 commits)
  Fix race condition between vxlan_sock_add and vxlan_sock_release
  net/macb: fix compilation warning for print_hex_dump() called with skb->mac_header
  net/mlx4: Add support for A0 steering
  net/mlx4: Refactor QUERY_PORT
  net/mlx4_core: Add explicit error message when rule doesn't meet configuration
  net/mlx4: Add A0 hybrid steering
  net/mlx4: Add mlx4_bitmap zone allocator
  net/mlx4: Add a check if there are too many reserved QPs
  net/mlx4: Change QP allocation scheme
  net/mlx4_core: Use tasklet for user-space CQ completion events
  net/mlx4_core: Mask out host side virtualization features for guests
  net/mlx4_en: Set csum level for encapsulated packets
  be2net: Export tunnel offloads only when a VxLAN tunnel is created
  gianfar: Fix dma check map error when DMA_API_DEBUG is enabled
  cxgb4/csiostor: Don't use MASTER_MUST for fw_hello call
  net: fec: only enable mdio interrupt before phy device link up
  net: fec: clear all interrupt events to support i.MX6SX
  net: fec: reset fep link status in suspend function
  net: sock: fix access via invalid file descriptor
  net: introduce helper macro for_each_cmsghdr
  ...

net, lib: kill arch_fast_hash library bits

2014-12-10T20:17:46+00:00

As there are now no remaining users of arch_fast_hash(), lets kill
it entirely.

This basically reverts commit 71ae8aac3e19 ("lib: introduce arch
optimized hash library") and follow-up work, that is f.e., commit
237217546d44 ("lib: hash: follow-up fixups for arch hash"),
commit e3fec2f74f7f ("lib: Add missing arch generic-y entries for
asm-generic/hash.h") and last but not least commit 6a02652df511
("perf tools: Fix include for non x86 architectures").

Cc: Francesco Fusco 
Cc: Thomas Graf 
Cc: Arnaldo Carvalho de Melo 
Signed-off-by: Daniel Borkmann 
Signed-off-by: David S. Miller

mm: Make arch_unmap()/bprm_mm_init() available to all architectures

2014-11-19T10:54:13+00:00

The x86 MPX patch set calls arch_unmap() and arch_bprm_mm_init()
from fs/exec.c, so we need at least a stub for them in all
architectures.  They are only called under an #ifdef for
CONFIG_MMU=y, so we can at least restict this to architectures
with MMU support.

blackfin/c6x have no MMU support, so do not call arch_unmap().
They also do not include mm_hooks.h or mmu_context.h at all and
do not need to be touched.

s390, um and unicore32 do not use asm-generic/mm_hooks.h, so got
their own arch_unmap() versions.  (I also moved um's
arch_dup_mmap() to be closer to the other mm_hooks.h functions).

xtensa only includes mm_hooks when MMU=y, which should be fine
since arch_unmap() is called only from MMU=y code.

For the rest, we use the stub copies of these functions in
asm-generic/mm_hook.h.

I cross compiled defconfigs for cris (to check NOMMU) and s390
to make sure that this works.  I also checked a 64-bit build
of UML and all my normal x86 builds including PARAVIRT on and
off.

Signed-off-by: Dave Hansen 
Cc: Dave Hansen 
Cc: linux-arch@vger.kernel.org
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/20141118182350.8B4AA2C2@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner

nosave: consolidate __nosave_{begin,end} in

2014-10-10T02:26:04+00:00

The different architectures used their own (and different) declarations:

    extern __visible const void __nosave_begin, __nosave_end;
    extern const void __nosave_begin, __nosave_end;
    extern long __nosave_begin, __nosave_end;

Consolidate them using the first variant in .

Signed-off-by: Geert Uytterhoeven 
Cc: Russell King 
Cc: Ralf Baechle 
Cc: Benjamin Herrenschmidt 
Cc: Martin Schwidefsky 
Cc: "David S. Miller" 
Cc: Guan Xuetao 
Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: "H. Peter Anvin" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

irq_work: Introduce arch_irq_work_has_interrupt()

2014-09-13T16:38:07+00:00

The nohz full code needs irq work to trigger its own interrupt so that
the subsystem can work even when the tick is stopped.

Lets introduce arch_irq_work_has_interrupt() that archs can override to
tell about their support for this ability.

Signed-off-by: Peter Zijlstra 
Cc: Ingo Molnar 
Cc: Paul E. McKenney 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Signed-off-by: Frederic Weisbecker

unicore32: Fix build error

2014-09-01T00:08:12+00:00

unicore32 builds fail with

  arch/unicore32/kernel/signal.c: In function ‘setup_frame’:
  arch/unicore32/kernel/signal.c:257: error: ‘usig’ undeclared (first use in this function)
  arch/unicore32/kernel/signal.c:279: error: ‘usig’ undeclared (first use in this function)
  arch/unicore32/kernel/signal.c: In function ‘handle_signal’:
  arch/unicore32/kernel/signal.c:306: warning: unused variable ‘tsk’
  arch/unicore32/kernel/signal.c: In function ‘do_signal’:
  arch/unicore32/kernel/signal.c:376: error: implicit declaration of function ‘get_signsl’
  make[1]: *** [arch/unicore32/kernel/signal.o] Error 1
  make: *** [arch/unicore32/kernel/signal.o] Error 2

Bisect points to commit 649671c90eaf ("unicore32: Use get_signal()
signal_setup_done()").

This code never even compiled.  Reverting the patch does not work, since
previously used functions no longer exist, so try to fix it up.  Compile
tested only.

Fixes: 649671c90eaf ("unicore32: Use get_signal() signal_setup_done()")
Cc: Richard Weinberger 
Signed-off-by: Guenter Roeck 
Signed-off-by: Linus Torvalds