linux-stable.git/arch/unicore32/kernel, branch linux-4.3.y

genirq: Remove irq argument from irq flow handlers

2015-09-16T13:47:51+00:00

Most interrupt flow handlers do not use the irq argument. Those few
which use it can retrieve the irq number from the irq descriptor.

Remove the argument.

Search and replace was done with coccinelle and some extra helper
scripts around it. Thanks to Julia for her help!

Signed-off-by: Thomas Gleixner 
Cc: Julia Lawall 
Cc: Jiang Liu

Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2015-09-01T21:33:35+00:00

Pull irq updates from Thomas Gleixner:
 "This updated pull request does not contain the last few GIC related
  patches which were reported to cause a regression.  There is a fix
  available, but I let it breed for a couple of days first.

  The irq departement provides:

   - new infrastructure to support non PCI based MSI interrupts
   - a couple of new irq chip drivers
   - the usual pile of fixlets and updates to irq chip drivers
   - preparatory changes for removal of the irq argument from interrupt
     flow handlers
   - preparatory changes to remove IRQF_VALID"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits)
  irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources
  irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2
  irqchip: Add documentation for the bcm2836 interrupt controller
  irqchip/bcm2835: Add support for being used as a second level controller
  irqchip/bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQ
  PCI: xilinx: Fix typo in function name
  irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance
  irqchip/gic: Only allow the primary GIC to set the CPU map
  PCI/MSI: pci-xgene-msi: Consolidate chained IRQ handler install/remove
  unicore32/irq: Prepare puv3_gpio_handler for irq argument removal
  tile/pci_gx: Prepare trio_handle_level_irq for irq argument removal
  m68k/irq: Prepare irq handlers for irq argument removal
  C6X/megamode-pic: Prepare megamod_irq_cascade for irq argument removal
  blackfin: Prepare irq handlers for irq argument removal
  arc/irq: Prepare idu_cascade_isr for irq argument removal
  sparc/irq: Use access helper irq_data_get_affinity_mask()
  sparc/irq: Use helper irq_data_get_irq_handler_data()
  parisc/irq: Use access helper irq_data_get_affinity_mask()
  mn10300/irq: Use access helper irq_data_get_affinity_mask()
  irqchip/i8259: Prepare i8259_irq_dispatch for irq argument removal
  ...

unicore/time: Migrate to new 'set-state' interface

2015-08-10T09:41:06+00:00

Migrate unicore driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

We weren't doing anything for PERIODIC or RESUME modes and so their
callbacks aren't implemented.

Cc: Guan Xuetao 
Signed-off-by: Viresh Kumar 
Signed-off-by: Daniel Lezcano

unicore32/irq: Prepare puv3_gpio_handler for irq argument removal

2015-08-01T06:07:23+00:00

The irq argument of most interrupt flow handlers is unused or merily
used instead of a local variable. The handlers which need the irq
argument can retrieve the irq number from the irq descriptor.

Search and update was done with coccinelle and the invaluable help of
Julia Lawall.

Signed-off-by: Thomas Gleixner 
Cc: Julia Lawall 
Cc: Guan Xuetao

arch/unicore32/kernel/fpu-ucf64.c: remove unnecessary KERN_ERR

2015-07-01T02:44:59+00:00

Signed-off-by: Masanari Iida 
Cc: Guan Xuetao 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'exec_domain_rip_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/misc

2015-04-15T20:53:55+00:00

Pull exec domain removal from Richard Weinberger:
 "This series removes execution domain support from Linux.

  The idea behind exec domains was to support different ABIs.  The
  feature was never complete nor stable.  Let's rip it out and make the
  kernel signal handling code less complicated"

* 'exec_domain_rip_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/misc: (27 commits)
  arm64: Removed unused variable
  sparc: Fix execution domain removal
  Remove rest of exec domains.
  arch: Remove exec_domain from remaining archs
  arc: Remove signal translation and exec_domain
  xtensa: Remove signal translation and exec_domain
  xtensa: Autogenerate offsets in struct thread_info
  x86: Remove signal translation and exec_domain
  unicore32: Remove signal translation and exec_domain
  um: Remove signal translation and exec_domain
  tile: Remove signal translation and exec_domain
  sparc: Remove signal translation and exec_domain
  sh: Remove signal translation and exec_domain
  s390: Remove signal translation and exec_domain
  mn10300: Remove signal translation and exec_domain
  microblaze: Remove signal translation and exec_domain
  m68k: Remove signal translation and exec_domain
  m32r: Remove signal translation and exec_domain
  m32r: Autogenerate offsets in struct thread_info
  frv: Remove signal translation and exec_domain
  ...

unicore32: Remove signal translation and exec_domain

2015-04-12T19:03:28+00:00

As execution domain support is gone we can remove
signal translation from the signal code and remove
exec_domain from thread_info.

Signed-off-by: Richard Weinberger

PCI: Assign resources before drivers claim devices (pci_scan_bus())

2015-03-12T20:04:01+00:00

Previously, pci_scan_bus() created a root PCI bus, enumerated the devices
on it, and called pci_bus_add_devices(), which made the devices available
for drivers to claim them.

Most callers assigned resources to devices after pci_scan_bus() returns,
which may be after drivers have claimed the devices.  This is incorrect;
the PCI core should not change device resources while a driver is managing
the device.

Remove pci_bus_add_devices() from pci_scan_bus() and do it after any
resource assignment in the callers.

[bhelgaas: changelog, check for failure in mcf_pci_init()]
Signed-off-by: Yijing Wang 
Signed-off-by: Bjorn Helgaas 
CC: "David S. Miller" 
CC: Geert Uytterhoeven 
CC: Guan Xuetao 
CC: Richard Henderson 
CC: Ivan Kokshaysky 
CC: Matt Turner

mm: vmalloc: pass additional vm_flags to __vmalloc_node_range()

2015-02-14T05:21:42+00:00

For instrumenting global variables KASan will shadow memory backing memory
for modules.  So on module loading we will need to allocate memory for
shadow and map it at address in shadow that corresponds to the address
allocated in module_alloc().

__vmalloc_node_range() could be used for this purpose, except it puts a
guard hole after allocated area.  Guard hole in shadow memory should be a
problem because at some future point we might need to have a shadow memory
at address occupied by guard hole.  So we could fail to allocate shadow
for module_alloc().

Now we have VM_NO_GUARD flag disabling guard page, so we need to pass into
__vmalloc_node_range().  Add new parameter 'vm_flags' to
__vmalloc_node_range() function.

Signed-off-by: Andrey Ryabinin 
Cc: Dmitry Vyukov 
Cc: Konstantin Serebryany 
Cc: Dmitry Chernenkov 
Signed-off-by: Andrey Konovalov 
Cc: Yuri Gribov 
Cc: Konstantin Khlebnikov 
Cc: Sasha Levin 
Cc: Christoph Lameter 
Cc: Joonsoo Kim 
Cc: Dave Hansen 
Cc: Andi Kleen 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: "H. Peter Anvin" 
Cc: Christoph Lameter 
Cc: Pekka Enberg 
Cc: David Rientjes 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

all arches, signal: move restart_block to struct task_struct

2015-02-13T02:54:12+00:00

If an attacker can cause a controlled kernel stack overflow, overwriting
the restart block is a very juicy exploit target.  This is because the
restart_block is held in the same memory allocation as the kernel stack.

Moving the restart block to struct task_struct prevents this exploit by
making the restart_block harder to locate.

Note that there are other fields in thread_info that are also easy
targets, at least on some architectures.

It's also a decent simplification, since the restart code is more or less
identical on all architectures.

[james.hogan@imgtec.com: metag: align thread_info::supervisor_stack]
Signed-off-by: Andy Lutomirski 
Cc: Thomas Gleixner 
Cc: Al Viro 
Cc: "H. Peter Anvin" 
Cc: Ingo Molnar 
Cc: Kees Cook 
Cc: David Miller 
Acked-by: Richard Weinberger 
Cc: Richard Henderson 
Cc: Ivan Kokshaysky 
Cc: Matt Turner 
Cc: Vineet Gupta 
Cc: Russell King 
Cc: Catalin Marinas 
Cc: Will Deacon 
Cc: Haavard Skinnemoen 
Cc: Hans-Christian Egtvedt 
Cc: Steven Miao 
Cc: Mark Salter 
Cc: Aurelien Jacquiot 
Cc: Mikael Starvik 
Cc: Jesper Nilsson 
Cc: David Howells 
Cc: Richard Kuo 
Cc: "Luck, Tony" 
Cc: Geert Uytterhoeven 
Cc: Michal Simek 
Cc: Ralf Baechle 
Cc: Jonas Bonn 
Cc: "James E.J. Bottomley" 
Cc: Helge Deller 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Acked-by: Michael Ellerman  (powerpc)
Tested-by: Michael Ellerman  (powerpc)
Cc: Martin Schwidefsky 
Cc: Heiko Carstens 
Cc: Chen Liqin 
Cc: Lennox Wu 
Cc: Chris Metcalf 
Cc: Guan Xuetao 
Cc: Chris Zankel 
Cc: Max Filippov 
Cc: Oleg Nesterov 
Cc: Guenter Roeck 
Signed-off-by: James Hogan 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds