linux-stable.git/arch/um/include, branch v5.5.2

Revert "um: Enable CONFIG_CONSTRUCTORS"

2020-02-01T09:33:00+00:00

commit 87c9366e17259040a9118e06b6dc8de986e5d3d1 upstream.

This reverts commit 786b2384bf1c ("um: Enable CONFIG_CONSTRUCTORS").

There are two issues with this commit, uncovered by Anton in tests
on some (Debian) systems:

1) I completely forgot to call any constructors if CONFIG_CONSTRUCTORS
   isn't set. Don't recall now if it just wasn't needed on my system, or
   if I never tested this case.

2) With that fixed, it works - with CONFIG_CONSTRUCTORS *unset*. If I
   set CONFIG_CONSTRUCTORS, it fails again, which isn't totally
   unexpected since whatever wanted to run is likely to have to run
   before the kernel init etc. that calls the constructors in this case.

Basically, some constructors that gcc emits (libc has?) need to run
very early during init; the failure mode otherwise was that the ptrace
fork test already failed:

----------------------
$ ./linux mem=512M
Core dump limits :
	soft - 0
	hard - NONE
Checking that ptrace can change system call numbers...check_ptrace : child exited with exitcode 6, while expecting 0; status 0x67f
Aborted
----------------------

Thinking more about this, it's clear that we simply cannot support
CONFIG_CONSTRUCTORS in UML. All the cases we need now (gcov, kasan)
involve not use of the __attribute__((constructor)), but instead
some constructor code/entry generated by gcc. Therefore, we cannot
distinguish between kernel constructors and system constructors.

Thus, revert this commit.

Cc: stable@vger.kernel.org [5.4+]
Fixes: 786b2384bf1c ("um: Enable CONFIG_CONSTRUCTORS")
Reported-by: Anton Ivanov 
Signed-off-by: Johannes Berg 
Acked-by: Anton Ivanov 
Signed-off-by: Greg Kroah-Hartman 

Signed-off-by: Richard Weinberger

um: Implement copy_thread_tls

2020-01-07T12:31:29+00:00

This is required for clone3 which passes the TLS value through a
struct rather than a register.

Signed-off-by: Amanieu d'Antras 
Cc: linux-um@lists.infradead.org
Cc:  # 5.3.x
Link: https://lore.kernel.org/r/20200104123928.1048822-1-amanieu@gmail.com
Signed-off-by: Christian Brauner

um: add support for folded p4d page tables

2019-12-05T03:44:15+00:00

The UML port uses 4 and 5 level fixups to support higher level page
table directories in the generic VM code.

Implement primitives necessary for the 4th level folding, add walks of
p4d level where appropriate and drop usage of __ARCH_USE_5LEVEL_HACK.

Link: http://lkml.kernel.org/r/1572938135-31886-13-git-send-email-rppt@kernel.org
Signed-off-by: Mike Rapoport 
Cc: Anatoly Pugachev 
Cc: Anton Ivanov 
Cc: Arnd Bergmann 
Cc: "David S. Miller" 
Cc: Geert Uytterhoeven 
Cc: Greentime Hu 
Cc: Greg Ungerer 
Cc: Helge Deller 
Cc: "James E.J. Bottomley" 
Cc: Jeff Dike 
Cc: "Kirill A. Shutemov" 
Cc: Mark Salter 
Cc: Matt Turner 
Cc: Michal Simek 
Cc: Peter Rosin 
Cc: Richard Weinberger 
Cc: Rolf Eike Beer 
Cc: Russell King 
Cc: Russell King 
Cc: Sam Creasey 
Cc: Vincent Chen 
Cc: Vineet Gupta 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

vmlinux.lds.h: Replace RODATA with RO_DATA

2019-11-04T14:53:15+00:00

There's no reason to keep the RODATA macro: replace the callers with
the expected RO_DATA macro.

Signed-off-by: Kees Cook 
Signed-off-by: Borislav Petkov 
Cc: Andy Lutomirski 
Cc: Arnd Bergmann 
Cc: Dave Hansen 
Cc: linux-alpha@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-c6x-dev@linux-c6x.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Rick Edgecombe 
Cc: Segher Boessenkool 
Cc: Will Deacon 
Cc: x86-ml 
Cc: Yoshinori Sato 
Link: https://lkml.kernel.org/r/20191029211351.13243-12-keescook@chromium.org

vmlinux.lds.h: Move NOTES into RO_DATA

2019-11-04T14:34:41+00:00

The .notes section should be non-executable read-only data. As such,
move it to the RO_DATA macro instead of being per-architecture defined.

Signed-off-by: Kees Cook 
Signed-off-by: Borislav Petkov 
Acked-by: Heiko Carstens  # s390
Cc: Andy Lutomirski 
Cc: Arnd Bergmann 
Cc: Dave Hansen 
Cc: linux-alpha@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-c6x-dev@linux-c6x.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Rick Edgecombe 
Cc: Segher Boessenkool 
Cc: Will Deacon 
Cc: x86-ml 
Cc: Yoshinori Sato 
Link: https://lkml.kernel.org/r/20191029211351.13243-11-keescook@chromium.org

mm: treewide: clarify pgtable_page_{ctor,dtor}() naming

2019-09-26T17:10:44+00:00

The naming of pgtable_page_{ctor,dtor}() seems to have confused a few
people, and until recently arm64 used these erroneously/pointlessly for
other levels of page table.

To make it incredibly clear that these only apply to the PTE level, and to
align with the naming of pgtable_pmd_page_{ctor,dtor}(), let's rename them
to pgtable_pte_page_{ctor,dtor}().

These changes were generated with the following shell script:

----
git grep -lw 'pgtable_page_.tor' | while read FILE; do
    sed -i '{s/pgtable_page_ctor/pgtable_pte_page_ctor/}' $FILE;
    sed -i '{s/pgtable_page_dtor/pgtable_pte_page_dtor/}' $FILE;
done
----

... with the documentation re-flowed to remain under 80 columns, and
whitespace fixed up in macros to keep backslashes aligned.

There should be no functional change as a result of this patch.

Link: http://lkml.kernel.org/r/20190722141133.3116-1-mark.rutland@arm.com
Signed-off-by: Mark Rutland 
Reviewed-by: Mike Rapoport 
Acked-by: Geert Uytterhoeven 	[m68k]
Cc: Anshuman Khandual 
Cc: Matthew Wilcox 
Cc: Michal Hocko 
Cc: Yu Zhao 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: consolidate pgtable_cache_init() and pgd_cache_init()

2019-09-24T22:54:09+00:00

Both pgtable_cache_init() and pgd_cache_init() are used to initialize kmem
cache for page table allocations on several architectures that do not use
PAGE_SIZE tables for one or more levels of the page table hierarchy.

Most architectures do not implement these functions and use __weak default
NOP implementation of pgd_cache_init().  Since there is no such default
for pgtable_cache_init(), its empty stub is duplicated among most
architectures.

Rename the definitions of pgd_cache_init() to pgtable_cache_init() and
drop empty stubs of pgtable_cache_init().

Link: http://lkml.kernel.org/r/1566457046-22637-1-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport 
Acked-by: Will Deacon 		[arm64]
Acked-by: Thomas Gleixner 	[x86]
Cc: Catalin Marinas 
Cc: Ingo Molnar 
Cc: Borislav Petkov 
Cc: Matthew Wilcox 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: remove quicklist page table caches

2019-09-24T22:54:09+00:00

Patch series "mm: remove quicklist page table caches".

A while ago Nicholas proposed to remove quicklist page table caches [1].

I've rebased his patch on the curren upstream and switched ia64 and sh to
use generic versions of PTE allocation.

[1] https://lore.kernel.org/linux-mm/20190711030339.20892-1-npiggin@gmail.com

This patch (of 3):

Remove page table allocator "quicklists".  These have been around for a
long time, but have not got much traction in the last decade and are only
used on ia64 and sh architectures.

The numbers in the initial commit look interesting but probably don't
apply anymore.  If anybody wants to resurrect this it's in the git
history, but it's unhelpful to have this code and divergent allocator
behaviour for minor archs.

Also it might be better to instead make more general improvements to page
allocator if this is still so slow.

Link: http://lkml.kernel.org/r/1565250728-21721-2-git-send-email-rppt@linux.ibm.com
Signed-off-by: Nicholas Piggin 
Signed-off-by: Mike Rapoport 
Cc: Tony Luck 
Cc: Yoshinori Sato 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

um: Add SPDX headers for files in arch/um/include

2019-09-15T19:37:17+00:00

Convert files to use SPDX header. All files are licensed under the GPLv2.

Signed-off-by: Alex Dewar 
Signed-off-by: Richard Weinberger

um: drivers: Add virtio vhost-user driver

2019-09-15T19:37:15+00:00

This module allows virtio devices to be used over a vhost-user socket.

Signed-off-by: Erel Geron 
Signed-off-by: Johannes Berg 
Signed-off-by: Richard Weinberger