Pull treewide timer related cleanups from Thomas Gleixner:

 - Remove the leftover CLOCK_TICK_RATE which has been scheduled for
   removal more than a decade ago along with some now empty asm/timex.h
   files.

 - Consolidate delay timer calibration

   The construct of having a define in a header requires that
   architectures provided asm/timex.h for no reason. Also the function
   name for reading the delay timer is confusing at best.

   Use a config switch to enable that functionality and rename the
   function to delay_read_timer() to make the purpose clear.

   This removes some more now empty asm/timex.h files as well.

* tag 'timers-cleanups-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  calibrate: Rework delay timer calibration
  treewide: Remove CLOCK_TICK_RATE
  x86: Use PIT_TICK_RATE instead of CLOCK_TICK_RATE

Pull generic entry code updates from Thomas Gleixner:

 - Make syscall user dispatching configurable

   Not all architectures can makes use of syscall user dispatching.
   Allow them to disable the feature completely.

 - Consolidate stack randomization for the generic entry code and the
   architectures using it.

   Stack randomization on syscall entry was sprinkled throughout the
   architecture specific low level entry code and in some cases at the
   wrong points, e.g. before establishing state, which violates the
   non-instrumentable constraints of that code.

   Clean this up by integrating stack randomization into the generic
   entry code helpers so that it is invoked at the earliest possible
   point right after establishing state and converting all generic entry
   code using architecture over.

 - Clean up the syscall number handling in the generic entry code. It
   works correctly for architectures which have a separate return value
   storage in pt_regs, but fails to distinguish the case where user
   space handed in -1 as syscall number from the case where the entry
   code rejects it by returning -1 to the callers. Aside of that the
   return value functionality of those interfaces is not really
   intuitive.

   Fix this by separating the decision to reject a syscall (user
   dispatch, ptrace, seccomp ...) from the potential modification of the
   syscall number through these mechanisms.

   This solves most of the problems for architectures which do not have
   a separate return value storage in pt_regs except for the case where
   a tracepoint has a BPF script or a probe attached which overwrite
   both the syscall number and the return value. But that's a problem
   which cannot be solved in the generic code, that only can be
   addressed by separating the storage model in the affected
   architectures.

* tag 'core-entry-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  entry, treewide: Make syscall_enter_from_user_mode[_work]() indicate syscall execution
  entry: Make return type of syscall_trace_enter() bool
  entry: Rework trace_syscall_enter()
  entry: Rework syscall_audit_enter()
  syscall_user_dispatch: Introduce ARCH_SUPPORTS_SYSCALL_USER_DISPATCH
  entry: Fix seccomp bypass after ptrace with TSYNC
  x86/entry: Simplify the syscall number logic
  x86/entry: Get rid of the sys_ni_syscall() indirection
  x86/entry: Make syscall functions static
  ptrace, treewide: Rename ptrace_report_syscall_entry() to ptrace_report_syscall_permit_entry()
  seccomp, treewide: Rename and convert __secure_computing() to return boolean
  entry: Use syscall number instead of rereading it
  entry: Remove syscall_enter_from_user_mode()
  x86/syscall: Use [syscall_]enter_from_user_mode_randomize_stack()
  s390/syscall: Use enter_from_user_mode_randomize_stack()
  riscv/syscall: Use syscall_enter_from_user_mode_randomize_stack()
  powerpc/syscall: Use syscall_enter_from_user_mode_randomize_stack()
  loongarch/syscall: Use syscall_enter_from_user_mode_randomize_stack()
  entry: Provide [syscall_]enter_from_user_mode_randomize_stack()
  randomize_kstack: Provide add_random_kstack_offset_irqsoff()
  ...

Wire up the fchroot() system call as number 472 on (nearly) all
architectures and sync the mirrored copies of the syscall tables and
the asm-generic unistd.h under tools/.

Link: https://patch.msgid.link/20260724-work-failfs-v2-5-485dabbae185@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>

The header define in asm/timex,h and the naming of the function to read the
delay timer are confusing at best.

Convert it to a config switch selected by the archictures which provide the
functionality and rename the function to delay_read_timer(), which makes
the purpose clear. Move the declaration to linux/delay.h where it belongs.

Remove the resulting empty asm/timex.h files as well.

No functional change.

Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260410120317.978403520@kernel.org

The return value of that function is boolean and tells the caller whether
to permit the syscall processing or not.

Rename the function so the purpose is clear and make the return type bool.

Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Radu Rendec <radu@rendec.net>
Reviewed-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://patch.msgid.link/20260707190254.280015701@kernel.org

Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.

Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>

Pull sparc updates from Andreas Larsson:

 - Align sparc to other archs by providing ucontext.h wrapper

 - Fix buffer underflow in led driver

 - Export mcount for clang and disable compat when using lld for linking

 - API choice improvement for sysfs code for vio

 - Fix build warnings and notification of missing prototype

 - Remove dead code and dead configs

* tag 'sparc-for-7.2-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc:
  sparc: Remove remaining defconfig references to the pktcdvd driver
  sparc: led: avoid trimming a newline from empty writes
  sparc: Export mcount for Clang-built modules
  sparc: Disable compat support with LLD
  sparc: Avoid -Wunused-but-set-parameter in clear_user_page()
  sparc: add _mcount() prototype
  sparc64: uprobes: add missing break
  sparc: remove unused SERIAL_CONSOLE config option
  sparc32: remove deadwood swift_flush_tlb_page() debug code
  sparc: uapi: Add ucontext.h
  sparc: vio: use sysfs_emit in sysfs show functions

led_proc_write() duplicates up to LED_MAX_LENGTH bytes with
memdup_user_nul() and then unconditionally inspects buf[count - 1] to
strip a trailing newline. A zero-length write therefore reads one byte
before the duplicated buffer.

The previous version rejected empty writes, but empty input already falls
through to the existing default case and turns the LED off like any other
unrecognized string. Preserve that behavior and only skip the newline
trim when there is no input byte to inspect.

Fixes: ee1858d3122d ("[SPARC]: Add sun4m LED driver.")
Suggested-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>

Missing fallthrough causes failure with newer compilers:

arch/sparc/kernel/uprobes.c:284:2: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough]
  284 |         default:
      |         ^
arch/sparc/kernel/uprobes.c:284:2: note: insert 'break;' to avoid fall-through
  284 |         default:
      |         ^
      |         break;

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>

Replace sprintf() and scnprintf() with sysfs_emit() in sysfs show
functions. sysfs_emit() is preferred to format sysfs output as it
provides better bounds checking.

Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Tested-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>