Currently, CONFIG_JUMP_LABEL just means "I _want_ to use jump label".

The jump label is controlled by HAVE_JUMP_LABEL, which is defined
like this:

  #if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_JUMP_LABEL)
  # define HAVE_JUMP_LABEL
  #endif

We can improve this by testing 'asm goto' support in Kconfig, then
make JUMP_LABEL depend on CC_HAS_ASM_GOTO.

Ugly #ifdef HAVE_JUMP_LABEL will go away, and CONFIG_JUMP_LABEL will
match to the real kernel capability.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>

Pull vfs mount API prep from Al Viro:
 "Mount API prereqs.

  Mostly that's LSM mount options cleanups. There are several minor
  fixes in there, but nothing earth-shattering (leaks on failure exits,
  mostly)"

* 'mount.part1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (27 commits)
  mount_fs: suppress MAC on MS_SUBMOUNT as well as MS_KERNMOUNT
  smack: rewrite smack_sb_eat_lsm_opts()
  smack: get rid of match_token()
  smack: take the guts of smack_parse_opts_str() into a new helper
  LSM: new method: ->sb_add_mnt_opt()
  selinux: rewrite selinux_sb_eat_lsm_opts()
  selinux: regularize Opt_... names a bit
  selinux: switch away from match_token()
  selinux: new helper - selinux_add_opt()
  LSM: bury struct security_mnt_opts
  smack: switch to private smack_mnt_opts
  selinux: switch to private struct selinux_mnt_opts
  LSM: hide struct security_mnt_opts from any generic code
  selinux: kill selinux_sb_get_mnt_opts()
  LSM: turn sb_eat_lsm_opts() into a method
  nfs_remount(): don't leak, don't ignore LSM options quietly
  btrfs: sanitize security_mnt_opts use
  selinux; don't open-code a loop in sb_finish_set_opts()
  LSM: split ->sb_set_mnt_opts() out of ->sb_kern_mount()
  new helper: security_sb_eat_lsm_opts()
  ...

Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.

It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access.  But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.

A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model.  And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.

This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.

There were a couple of notable cases:

 - csky still had the old "verify_area()" name as an alias.

 - the iter_iov code had magical hardcoded knowledge of the actual
   values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
   really used it)

 - microblaze used the type argument for a debug printout

but other than those oddities this should be a total no-op patch.

I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something.  Any missed conversion should be trivially fixable, though.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull kgdb updates from Daniel Thompson:
 "Mostly clean ups although while Doug's was chasing down a odd lockdep
  warning he also did some work to improved debugger resilience when
  some CPUs fail to respond to the round up request.

  The main changes are:

   - Fixing a lockdep warning on architectures that cannot use an NMI
     for the round up plus related changes to make CPU round up and all
     CPU backtrace more resilient.

   - Constify the arch ops tables

   - A couple of other small clean ups

  Two of the three patchsets here include changes that spill over into
  arch/. Changes in the arch space are relatively narrow in scope (and
  directly related to kgdb). Didn't get comprehensive acks but all
  impacted maintainers were Cc:ed in good time"

* tag 'kgdb-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
  kgdb/treewide: constify struct kgdb_arch arch_kgdb_ops
  mips/kgdb: prepare arch_kgdb_ops for constness
  kdb: use bool for binary state indicators
  kdb: Don't back trace on a cpu that didn't round up
  kgdb: Don't round up a CPU that failed rounding up before
  kgdb: Fix kgdb_roundup_cpus() for arches who used smp_call_function()
  kgdb: Remove irq flags from roundup

Pull tracing updates from Steven Rostedt:

 - Rework of the kprobe/uprobe and synthetic events to consolidate all
   the dynamic event code. This will make changes in the future easier.

 - Partial rewrite of the function graph tracing infrastructure. This
   will allow for multiple users of hooking onto functions to get the
   callback (return) of the function. This is the ground work for having
   kprobes and function graph tracer using one code base.

 - Clean up of the histogram code that will facilitate adding more
   features to the histograms in the future.

 - Addition of str_has_prefix() and a few use cases. There currently is
   a similar function strstart() that is used in a few places, but only
   returns a bool and not a length. These instances will be removed in
   the future to use str_has_prefix() instead.

 - A few other various clean ups as well.

* tag 'trace-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (57 commits)
  tracing: Use the return of str_has_prefix() to remove open coded numbers
  tracing: Have the historgram use the result of str_has_prefix() for len of prefix
  tracing: Use str_has_prefix() instead of using fixed sizes
  tracing: Use str_has_prefix() helper for histogram code
  string.h: Add str_has_prefix() helper function
  tracing: Make function ‘ftrace_exports’ static
  tracing: Simplify printf'ing in seq_print_sym
  tracing: Avoid -Wformat-nonliteral warning
  tracing: Merge seq_print_sym_short() and seq_print_sym_offset()
  tracing: Add hist trigger comments for variable-related fields
  tracing: Remove hist trigger synth_var_refs
  tracing: Use hist trigger's var_ref array to destroy var_refs
  tracing: Remove open-coding of hist trigger var_ref management
  tracing: Use var_refs[] for hist trigger reference checking
  tracing: Change strlen to sizeof for hist trigger static strings
  tracing: Remove unnecessary hist trigger struct field
  tracing: Fix ftrace_graph_get_ret_stack() to use task and not current
  seq_buf: Use size_t for len in seq_buf_puts()
  seq_buf: Make seq_buf_puts() null-terminate the buffer
  arm64: Use ftrace_graph_get_ret_stack() instead of curr_ret_stack
  ...

checkpatch.pl reports the following:

  WARNING: struct kgdb_arch should normally be const
  #28: FILE: arch/mips/kernel/kgdb.c:397:
  +struct kgdb_arch arch_kgdb_ops = {

This report makes sense, as all other ops struct, this
one should also be const. This patch does the change.

Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: x86@kernel.org
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>

The function kgdb_roundup_cpus() was passed a parameter that was
documented as:

> the flags that will be used when restoring the interrupts. There is
> local_irq_save() call before kgdb_roundup_cpus().

Nobody used those flags.  Anyone who wanted to temporarily turn on
interrupts just did local_irq_enable() and local_irq_disable() without
looking at them.  So we can definitely remove the flags.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>

Pull DMA mapping updates from Christoph Hellwig:
 "A huge update this time, but a lot of that is just consolidating or
  removing code:

   - provide a common DMA_MAPPING_ERROR definition and avoid indirect
     calls for dma_map_* error checking

   - use direct calls for the DMA direct mapping case, avoiding huge
     retpoline overhead for high performance workloads

   - merge the swiotlb dma_map_ops into dma-direct

   - provide a generic remapping DMA consistent allocator for
     architectures that have devices that perform DMA that is not cache
     coherent. Based on the existing arm64 implementation and also used
     for csky now.

   - improve the dma-debug infrastructure, including dynamic allocation
     of entries (Robin Murphy)

   - default to providing chaining scatterlist everywhere, with opt-outs
     for the few architectures (alpha, parisc, most arm32 variants) that
     can't cope with it

   - misc sparc32 dma-related cleanups

   - remove the dma_mark_clean arch hook used by swiotlb on ia64 and
     replace it with the generic noncoherent infrastructure

   - fix the return type of dma_set_max_seg_size (Niklas Söderlund)

   - move the dummy dma ops for not DMA capable devices from arm64 to
     common code (Robin Murphy)

   - ensure dma_alloc_coherent returns zeroed memory to avoid kernel
     data leaks through userspace. We already did this for most common
     architectures, but this ensures we do it everywhere.
     dma_zalloc_coherent has been deprecated and can hopefully be
     removed after -rc1 with a coccinelle script"

* tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mapping: (73 commits)
  dma-mapping: fix inverted logic in dma_supported
  dma-mapping: deprecate dma_zalloc_coherent
  dma-mapping: zero memory returned from dma_alloc_*
  sparc/iommu: fix ->map_sg return value
  sparc/io-unit: fix ->map_sg return value
  arm64: default to the direct mapping in get_arch_dma_ops
  PCI: Remove unused attr variable in pci_dma_configure
  ia64: only select ARCH_HAS_DMA_COHERENT_TO_PFN if swiotlb is enabled
  dma-mapping: bypass indirect calls for dma-direct
  vmd: use the proper dma_* APIs instead of direct methods calls
  dma-direct: merge swiotlb_dma_ops into the dma_direct code
  dma-direct: use dma_direct_map_page to implement dma_direct_map_sg
  dma-direct: improve addressability error reporting
  swiotlb: remove dma_mark_clean
  swiotlb: remove SWIOTLB_MAP_ERROR
  ACPI / scan: Refactor _CCA enforcement
  dma-mapping: factor out dummy DMA ops
  dma-mapping: always build the direct mapping code
  dma-mapping: move dma_cache_sync out of line
  dma-mapping: move various slow path functions out of line
  ...

Pull sparc updates from David Miller:

 - Automatic system call table generation, from Firoz Khan.

 - Clean up accesses to the OF device names by using full_name instead
   of path_component_name.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next:
  ALSA: sparc: Use of_node_name_eq for node name comparisons
  sbus: Use of_node_name_eq for node name comparisons
  sparc: generate uapi header and system call table files
  sparc: add system call table generation support
  sparc: add __NR_syscalls along with NR_syscalls
  sparc: move __IGNORE* entries to non uapi header
  sparc: Use DT node full_name instead of name for resources
  sparc: Remove unused leon_trans_init
  sparc: Use device_type helpers to access the node type
  sparc: Use of_node_name_eq for node name comparisons
  sparc: Convert to using %pOFn instead of device_node.name
  sparc: prom: use property "name" directly to construct node names
  of: Drop full path from full_name for PDT systems
  sparc: Convert to using %pOF instead of full_name
  fs/openpromfs: Use of_node_name_eq for node name comparisons
  fs/openpromfs: use full_name instead of path_component_name

The structure of the ret_stack array on the task struct is going to
change, and accessing it directly via the curr_ret_stack index will no
longer give the ret_stack entry that holds the return address. To access
that, architectures must now use ftrace_graph_get_ret_stack() to get the
associated ret_stack that matches the saved return address.

Cc: sparclinux@vger.kernel.org
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>