Pull sh updates from John Paul Adrian Glaubitz:
 "Fixes and improvements for sh:

   - replace seq_printf() with the more efficient
     seq_put_decimal_ull_width() to increase performance when stress
     reading /proc/interrupts (David Wang)

   - migrate sh to the generic rule for built-in DTB to help avoid race
     conditions during parallel builds which can occur because Kbuild
     decends into arch/*/boot/dts twice (Masahiro Yamada)

   - replace select with imply in the board Kconfig for enabling
     hardware with complex dependencies. This addresses warnings which
     were reported by the kernel test robot (Geert Uytterhoeven)"

* tag 'sh-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
  sh: boards: Use imply to enable hardware with complex dependencies
  sh: Migrate to the generic rule for built-in DTB
  sh: irq: Use seq_put_decimal_ull_width() for decimal values

If CONFIG_I2C=n:

    WARNING: unmet direct dependencies detected for SND_SOC_AK4642
      Depends on [n]: SOUND [=y] && SND [=y] && SND_SOC [=y] && I2C [=n]
      Selected by [y]:
      - SH_7724_SOLUTION_ENGINE [=y] && CPU_SUBTYPE_SH7724 [=y] && SND_SIMPLE_CARD [=y]

    WARNING: unmet direct dependencies detected for SND_SOC_DA7210
      Depends on [n]: SOUND [=y] && SND [=y] && SND_SOC [=y] && SND_SOC_I2C_AND_SPI [=n]
      Selected by [y]:
      - SH_ECOVEC [=y] && CPU_SUBTYPE_SH7724 [=y] && SND_SIMPLE_CARD [=y]

Fix this by replacing select by imply, instead of adding a dependency on
I2C.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501240836.OvXqmANX-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>

Commit 654102df2ac2 ("kbuild: add generic support for built-in
boot DTBs") introduced generic support for built-in DTBs.

Select GENERIC_BUILTIN_DTB when built-in DTB support is enabled.

To keep consistency across architectures, this commit also renames
CONFIG_USE_BUILTIN_DTB to CONFIG_BUILTIN_DTB, and
CONFIG_BUILTIN_DTB_SOURCE to CONFIG_BUILTIN_DTB_NAME.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>

On a system with n CPUs and m interrupts, there will be n*m decimal
values yielded via seq_printf(.."%10u "..) which has significant costs
parsing format string and is less efficient than seq_put_decimal_ull_width().
Stress reading /proc/interrupts indicates ~30% performance improvement with
this patch.

Signed-off-by: David Wang <00107082@163.com>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>

Before SLUB initialization, various subsystems used memblock_alloc to
allocate memory.  In most cases, when memory allocation fails, an
immediate panic is required.  To simplify this behavior and reduce
repetitive checks, introduce `memblock_alloc_or_panic`.  This function
ensures that memory allocation failures result in a panic automatically,
improving code readability and consistency across subsystems that require
this behavior.

[guoweikang.kernel@gmail.com: arch/s390: save_area_alloc default failure behavior changed to panic]
  Link: https://lkml.kernel.org/r/20250109033136.2845676-1-guoweikang.kernel@gmail.com
  Link: https://lore.kernel.org/lkml/Z2fknmnNtiZbCc7x@kernel.org/
Link: https://lkml.kernel.org/r/20250102072528.650926-1-guoweikang.kernel@gmail.com
Signed-off-by: Guo Weikang <guoweikang.kernel@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>	[m68k]
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>	[s390]
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The pagetable_p*_dtor() are exactly the same except for the handling of
ptlock.  If we make ptlock_free() handle the case where ptdesc->ptl is
NULL and remove VM_BUG_ON_PAGE() from pmd_ptlock_free(), we can unify
pagetable_p*_dtor() into one function.  Let's introduce pagetable_dtor()
to do this.

Later, pagetable_dtor() will be moved to tlb_remove_ptdesc(), so that
ptlock and page table pages can be freed together (regardless of whether
RCU is used).  This prevents the use-after-free problem where the ptlock
is freed immediately but the page table pages is freed later via RCU.

Link: https://lkml.kernel.org/r/47f44fff9dc68d9d9e9a0d6c036df275f820598a.1736317725.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Originally-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>	[s390]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The continual trickle of small conversion patches is grating on me, and
is really not helping.  Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:

  /*
   * .remove_new() is a relic from a prototype conversion of .remove().
   * New drivers are supposed to implement .remove(). Once all drivers are
   * converted to not use .remove_new any more, it will be dropped.
   */

This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.

I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.

Then I just removed the old (sic) .remove_new member function, and this
is the end result.  No more unnecessary conversion noise.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull sh updates from John Paul Adrian Glaubitz:
 "Two small fixes.

  The first one by Huacai Chen addresses a runtime warning when
  CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS are selected
  which occurs because the cpuinfo code on sh incorrectly uses NR_CPUS
  when iterating CPUs instead of the runtime limit nr_cpu_ids.

  A second fix by Dan Carpenter fixes a use-after-free bug in
  register_intc_controller() which occurred as a result of improper
  error handling in the interrupt controller driver code when
  registering an interrupt controller during plat_irq_setup() on sh"

* tag 'sh-for-v6.13-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
  sh: intc: Fix use-after-free bug in register_intc_controller()
  sh: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK

When CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS are selected,
cpu_max_bits_warn() generates a runtime warning similar as below when
showing /proc/cpuinfo. Fix this by using nr_cpu_ids (the runtime limit)
instead of NR_CPUS to iterate CPUs.

[    3.052463] ------------[ cut here ]------------
[    3.059679] WARNING: CPU: 3 PID: 1 at include/linux/cpumask.h:108 show_cpuinfo+0x5e8/0x5f0
[    3.070072] Modules linked in: efivarfs autofs4
[    3.076257] CPU: 0 PID: 1 Comm: systemd Not tainted 5.19-rc5+ #1052
[    3.099465] Stack : 9000000100157b08 9000000000f18530 9000000000cf846c 9000000100154000
[    3.109127]         9000000100157a50 0000000000000000 9000000100157a58 9000000000ef7430
[    3.118774]         90000001001578e8 0000000000000040 0000000000000020 ffffffffffffffff
[    3.128412]         0000000000aaaaaa 1ab25f00eec96a37 900000010021de80 900000000101c890
[    3.138056]         0000000000000000 0000000000000000 0000000000000000 0000000000aaaaaa
[    3.147711]         ffff8000339dc220 0000000000000001 0000000006ab4000 0000000000000000
[    3.157364]         900000000101c998 0000000000000004 9000000000ef7430 0000000000000000
[    3.167012]         0000000000000009 000000000000006c 0000000000000000 0000000000000000
[    3.176641]         9000000000d3de08 9000000001639390 90000000002086d8 00007ffff0080286
[    3.186260]         00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c
[    3.195868]         ...
[    3.199917] Call Trace:
[    3.203941] [<90000000002086d8>] show_stack+0x38/0x14c
[    3.210666] [<9000000000cf846c>] dump_stack_lvl+0x60/0x88
[    3.217625] [<900000000023d268>] __warn+0xd0/0x100
[    3.223958] [<9000000000cf3c90>] warn_slowpath_fmt+0x7c/0xcc
[    3.231150] [<9000000000210220>] show_cpuinfo+0x5e8/0x5f0
[    3.238080] [<90000000004f578c>] seq_read_iter+0x354/0x4b4
[    3.245098] [<90000000004c2e90>] new_sync_read+0x17c/0x1c4
[    3.252114] [<90000000004c5174>] vfs_read+0x138/0x1d0
[    3.258694] [<90000000004c55f8>] ksys_read+0x70/0x100
[    3.265265] [<9000000000cfde9c>] do_syscall+0x7c/0x94
[    3.271820] [<9000000000202fe4>] handle_syscall+0xc4/0x160
[    3.281824] ---[ end trace 8b484262b4b8c24c ]---

Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>

Pull non-MM updates from Andrew Morton:

 - The series "resource: A couple of cleanups" from Andy Shevchenko
   performs some cleanups in the resource management code

 - The series "Improve the copy of task comm" from Yafang Shao addresses
   possible race-induced overflows in the management of
   task_struct.comm[]

 - The series "Remove unnecessary header includes from
   {tools/}lib/list_sort.c" from Kuan-Wei Chiu adds some cleanups and a
   small fix to the list_sort library code and to its selftest

 - The series "Enhance min heap API with non-inline functions and
   optimizations" also from Kuan-Wei Chiu optimizes and cleans up the
   min_heap library code

 - The series "nilfs2: Finish folio conversion" from Ryusuke Konishi
   finishes off nilfs2's folioification

 - The series "add detect count for hung tasks" from Lance Yang adds
   more userspace visibility into the hung-task detector's activity

 - Apart from that, singelton patches in many places - please see the
   individual changelogs for details

* tag 'mm-nonmm-stable-2024-11-24-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (71 commits)
  gdb: lx-symbols: do not error out on monolithic build
  kernel/reboot: replace sprintf() with sysfs_emit()
  lib: util_macros_kunit: add kunit test for util_macros.h
  util_macros.h: fix/rework find_closest() macros
  Improve consistency of '#error' directive messages
  ocfs2: fix uninitialized value in ocfs2_file_read_iter()
  hung_task: add docs for hung_task_detect_count
  hung_task: add detect count for hung tasks
  dma-buf: use atomic64_inc_return() in dma_buf_getfile()
  fs/proc/kcore.c: fix coccinelle reported ERROR instances
  resource: avoid unnecessary resource tree walking in __region_intersects()
  ocfs2: remove unused errmsg function and table
  ocfs2: cluster: fix a typo
  lib/scatterlist: use sg_phys() helper
  checkpatch: always parse orig_commit in fixes tag
  nilfs2: convert metadata aops from writepage to writepages
  nilfs2: convert nilfs_recovery_copy_block() to take a folio
  nilfs2: convert nilfs_page_count_clean_buffers() to take a folio
  nilfs2: remove nilfs_writepage
  nilfs2: convert checkpoint file to be folio-based
  ...