linux-stable.git/arch/sh/kernel, branch v5.8

sh: Fix validation of system call number

2020-07-27T20:12:49+00:00

The slow path for traced system call entries accessed a wrong memory
location to get the number of the maximum allowed system call number.
Renumber the numbered "local" label for the correct location to avoid
collisions with actual local labels.

Signed-off-by: Michael Karcher 
Tested-by: John Paul Adrian Glaubitz 
Fixes: f3a8308864f920d2 ("sh: Add a few missing irqflags tracing markers.")
Signed-off-by: Rich Felker

maccess: rename probe_kernel_address to get_kernel_nofault

2020-06-18T18:14:40+00:00

Better describe what this helper does, and match the naming of
copy_from_kernel_nofault.

Also switch the argument order around, so that it acts and looks
like get_user().

Signed-off-by: Christoph Hellwig 
Signed-off-by: Linus Torvalds

maccess: rename probe_kernel_{read,write} to copy_{from,to}_kernel_nofault

2020-06-17T17:57:41+00:00

Better describe what these functions do.

Suggested-by: Linus Torvalds 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Linus Torvalds

mmap locking API: use coccinelle to convert mmap_sem rwsem call sites

2020-06-09T16:39:14+00:00

This change converts the existing mmap_sem rwsem calls to use the new mmap
locking API instead.

The change is generated using coccinelle with the following rule:

// spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir .

@@
expression mm;
@@
(
-init_rwsem
+mmap_init_lock
|
-down_write
+mmap_write_lock
|
-down_write_killable
+mmap_write_lock_killable
|
-down_write_trylock
+mmap_write_trylock
|
-up_write
+mmap_write_unlock
|
-downgrade_write
+mmap_write_downgrade
|
-down_read
+mmap_read_lock
|
-down_read_killable
+mmap_read_lock_killable
|
-down_read_trylock
+mmap_read_trylock
|
-up_read
+mmap_read_unlock
)
-(&mm->mmap_sem)
+(mm)

Signed-off-by: Michel Lespinasse 
Signed-off-by: Andrew Morton 
Reviewed-by: Daniel Jordan 
Reviewed-by: Laurent Dufour 
Reviewed-by: Vlastimil Babka 
Cc: Davidlohr Bueso 
Cc: David Rientjes 
Cc: Hugh Dickins 
Cc: Jason Gunthorpe 
Cc: Jerome Glisse 
Cc: John Hubbard 
Cc: Liam Howlett 
Cc: Matthew Wilcox 
Cc: Peter Zijlstra 
Cc: Ying Han 
Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com
Signed-off-by: Linus Torvalds

mm: don't include asm/pgtable.h if linux/mm.h is already included

2020-06-09T16:39:13+00:00

Patch series "mm: consolidate definitions of page table accessors", v2.

The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once.  For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.

Most of these definitions are actually identical and typically it boils
down to, e.g.

static inline unsigned long pmd_index(unsigned long address)
{
        return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}

static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
        return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}

These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.

For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.

These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.

This patch (of 12):

The linux/mm.h header includes  to allow inlining of the
functions involving page table manipulations, e.g.  pte_alloc() and
pmd_alloc().  So, there is no point to explicitly include 
in the files that include .

The include statements in such cases are remove with a simple loop:

	for f in $(git grep -l "include ") ; do
		sed -i -e '/include / d' $f
	done

Signed-off-by: Mike Rapoport 
Signed-off-by: Andrew Morton 
Cc: Arnd Bergmann 
Cc: Borislav Petkov 
Cc: Brian Cain 
Cc: Catalin Marinas 
Cc: Chris Zankel 
Cc: "David S. Miller" 
Cc: Geert Uytterhoeven 
Cc: Greentime Hu 
Cc: Greg Ungerer 
Cc: Guan Xuetao 
Cc: Guo Ren 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: Ingo Molnar 
Cc: Ley Foon Tan 
Cc: Mark Salter 
Cc: Matthew Wilcox 
Cc: Matt Turner 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Mike Rapoport 
Cc: Nick Hu 
Cc: Paul Walmsley 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Russell King 
Cc: Stafford Horne 
Cc: Thomas Bogendoerfer 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: Vincent Chen 
Cc: Vineet Gupta 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org
Signed-off-by: Linus Torvalds

kernel: rename show_stack_loglvl() => show_stack()

2020-06-09T16:39:13+00:00

Now the last users of show_stack() got converted to use an explicit log
level, show_stack_loglvl() can drop it's redundant suffix and become once
again well known show_stack().

Signed-off-by: Dmitry Safonov 
Signed-off-by: Andrew Morton 
Link: http://lkml.kernel.org/r/20200418201944.482088-51-dima@arista.com
Signed-off-by: Linus Torvalds

sh: add show_stack_loglvl()

2020-06-09T16:39:12+00:00

Currently, the log-level of show_stack() depends on a platform
realization.  It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).

Furthermore, it forces the logic decision from user to an architecture
side.  In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages.  And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.

Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers.  Also, it will consolidate
printings with headers.

Introduce show_stack_loglvl(), that eventually will substitute
show_stack().

[1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#u

Signed-off-by: Dmitry Safonov 
Signed-off-by: Andrew Morton 
Cc: Rich Felker 
Cc: Yoshinori Sato 
Link: http://lkml.kernel.org/r/20200418201944.482088-34-dima@arista.com
Signed-off-by: Linus Torvalds

sh: add loglvl to show_trace()

2020-06-09T16:39:12+00:00

Currently, the log-level of show_stack() depends on a platform
realization.  It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).

Furthermore, it forces the logic decision from user to an architecture
side.  In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages.  And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.

Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers.  Also, it will consolidate
printings with headers.

Add log level parameter to show_trace() as a preparation to introduce
show_stack_loglvl().

[1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#u

Signed-off-by: Dmitry Safonov 
Signed-off-by: Andrew Morton 
Cc: Rich Felker 
Link: http://lkml.kernel.org/r/20200418201944.482088-33-dima@arista.com
Signed-off-by: Linus Torvalds

sh: add loglvl to printk_address()

2020-06-09T16:39:12+00:00

Currently, the log-level of show_stack() depends on a platform
realization.  It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).

Furthermore, it forces the logic decision from user to an architecture
side.  In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages.  And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.

Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers.  Also, it will consolidate
printings with headers.

Add log level argument to printk_address() as a preparation to introduce
show_stack_loglvl().

As a good side-effect show_fault_oops() now prints the address with
KERN_EMREG as the rest of output, making sure there won't be situation
where "PC: " is printed without actual address.

[1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#u

Signed-off-by: Dmitry Safonov 
Signed-off-by: Andrew Morton 
Cc: Rich Felker 
Link: http://lkml.kernel.org/r/20200418201944.482088-32-dima@arista.com
Signed-off-by: Linus Torvalds

sh: remove needless printk()

2020-06-09T16:39:12+00:00

Currently `data' is always an empty line "".  No need for additional
printk() call.

Signed-off-by: Dmitry Safonov 
Signed-off-by: Andrew Morton 
Cc: Rich Felker 
Cc: Yoshinori Sato 
Link: http://lkml.kernel.org/r/20200418201944.482088-31-dima@arista.com
Signed-off-by: Linus Torvalds