Pull media updates from Mauro Carvalho Chehab:
 - new DVB frontend drivers: ascot2e, cxd2841er, horus3a, lnbh25
 - new HDMI capture driver: tc358743
 - new driver for NetUP DVB new boards (netup_unidvb)
 - IR support for DVBSky cards (smipcie-ir)
 - Coda driver has gain macroblock tiling support
 - Renesas R-Car gains JPEG codec driver
 - new DVB platform driver for STi boards: c8sectpfe
 - added documentation for the media core kABI to device-drivers DocBook
 - lots of driver fixups, cleanups and improvements

* tag 'media/v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (297 commits)
  [media] c8sectpfe: Remove select on undefined LIBELF_32
  [media] i2c: fix platform_no_drv_owner.cocci warnings
  [media] cx231xx: Use wake_up_interruptible() instead of wake_up_interruptible_nr()
  [media] tc358743: only queue subdev notifications if devnode is set
  [media] tc358743: add missing Kconfig dependency/select
  [media] c8sectpfe: Use %pad to print 'dma_addr_t'
  [media] DocBook media: Fix typo "the the" in xml files
  [media] tc358743: make reset gpio optional
  [media] tc358743: set direction of reset gpio using devm_gpiod_get
  [media] dvbdev: document most of the functions/data structs
  [media] dvb_frontend.h: document the struct dvb_frontend
  [media] dvb-frontend.h: document struct dtv_frontend_properties
  [media] dvb-frontend.h: document struct dvb_frontend_ops
  [media] dvb: Use DVBFE_ALGO_HW where applicable
  [media] dvb_frontend.h: document struct analog_demod_ops
  [media] dvb_frontend.h: Document struct dvb_tuner_ops
  [media] Docbook: Document struct analog_parameters
  [media] dvb_frontend.h: get rid of dvbfe_modcod
  [media] add documentation for struct dvb_tuner_info
  [media] dvb_frontend: document dvb_frontend_tune_settings
  ...

Pull irq updates from Thomas Gleixner:
 "This updated pull request does not contain the last few GIC related
  patches which were reported to cause a regression.  There is a fix
  available, but I let it breed for a couple of days first.

  The irq departement provides:

   - new infrastructure to support non PCI based MSI interrupts
   - a couple of new irq chip drivers
   - the usual pile of fixlets and updates to irq chip drivers
   - preparatory changes for removal of the irq argument from interrupt
     flow handlers
   - preparatory changes to remove IRQF_VALID"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits)
  irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources
  irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2
  irqchip: Add documentation for the bcm2836 interrupt controller
  irqchip/bcm2835: Add support for being used as a second level controller
  irqchip/bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQ
  PCI: xilinx: Fix typo in function name
  irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance
  irqchip/gic: Only allow the primary GIC to set the CPU map
  PCI/MSI: pci-xgene-msi: Consolidate chained IRQ handler install/remove
  unicore32/irq: Prepare puv3_gpio_handler for irq argument removal
  tile/pci_gx: Prepare trio_handle_level_irq for irq argument removal
  m68k/irq: Prepare irq handlers for irq argument removal
  C6X/megamode-pic: Prepare megamod_irq_cascade for irq argument removal
  blackfin: Prepare irq handlers for irq argument removal
  arc/irq: Prepare idu_cascade_isr for irq argument removal
  sparc/irq: Use access helper irq_data_get_affinity_mask()
  sparc/irq: Use helper irq_data_get_irq_handler_data()
  parisc/irq: Use access helper irq_data_get_affinity_mask()
  mn10300/irq: Use access helper irq_data_get_affinity_mask()
  irqchip/i8259: Prepare i8259_irq_dispatch for irq argument removal
  ...

Pull timer updates from Thomas Gleixner:
 "Rather large, but nothing exiting:

   - new range check for settimeofday() to prevent that boot time
     becomes negative.
   - fix for file time rounding
   - a few simplifications of the hrtimer code
   - fix for the proc/timerlist code so the output of clock realtime
     timers is accurate
   - more y2038 work
   - tree wide conversion of clockevent drivers to the new callbacks"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (88 commits)
  hrtimer: Handle failure of tick_init_highres() gracefully
  hrtimer: Unconfuse switch_hrtimer_base() a bit
  hrtimer: Simplify get_target_base() by returning current base
  hrtimer: Drop return code of hrtimer_switch_to_hres()
  time: Introduce timespec64_to_jiffies()/jiffies_to_timespec64()
  time: Introduce current_kernel_time64()
  time: Introduce struct itimerspec64
  time: Add the common weak version of update_persistent_clock()
  time: Always make sure wall_to_monotonic isn't positive
  time: Fix nanosecond file time rounding in timespec_trunc()
  timer_list: Add the base offset so remaining nsecs are accurate for non monotonic timers
  cris/time: Migrate to new 'set-state' interface
  kernel: broadcast-hrtimer: Migrate to new 'set-state' interface
  xtensa/time: Migrate to new 'set-state' interface
  unicore/time: Migrate to new 'set-state' interface
  um/time: Migrate to new 'set-state' interface
  sparc/time: Migrate to new 'set-state' interface
  sh/localtimer: Migrate to new 'set-state' interface
  score/time: Migrate to new 'set-state' interface
  s390/time: Migrate to new 'set-state' interface
  ...

Migrate sh driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

We weren't doing anything in the ->set_mode() callback. So, this patch
doesn't provide any set-state callbacks.

Cc: linux-sh@vger.kernel.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Its return value is not used by the subsys core and nothing meaningful
can be done with it, even if we want to use it. The subsys device is
anyway getting removed.

Update prototype of ->remove_dev() to make its return type as void. Fix
all usage sites as well.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a preparatory patch for moving irq_data struct members.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Simon Horman <horms@verge.net.au>
Cc: Magnus Damm <magnus.damm@gmail.com>
Link: http://lkml.kernel.org/r/20150713151626.713278346@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Use accessor irq_data_get_node() to hide struct irq_data
implementation detail, so we can move irq_data->node to
irq_data_common once all usage sites are fixed.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Simon Horman <horms@verge.net.au>
Cc: Magnus Damm <magnus.damm@gmail.com>
Link: http://lkml.kernel.org/r/20150713151626.519112900@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Bitrot has set in for this driver and the sh-vou clock was never enabled,
since the clock name in clock-sh7724.c was wrong. It should be sh-vou, not
sh-vou.0.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Thanks-to: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Magnus Damm <damm@opensource.se>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

We have always had an efficient way of registering a table of clock
lookups - it's called clkdev_add_table().  However, some people seem
to really love writing inefficient and unnecessary code.

Convert SH to use the correct interface.

Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Pull final removal of deprecated cpus_* cpumask functions from Rusty Russell:
 "This is the final removal (after several years!) of the obsolete
  cpus_* functions, prompted by their mis-use in staging.

  With these function removed, all cpu functions should only iterate to
  nr_cpu_ids, so we finally only allocate that many bits when cpumasks
  are allocated offstack"

* tag 'cpumask-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (25 commits)
  cpumask: remove __first_cpu / __next_cpu
  cpumask: resurrect CPU_MASK_CPU0
  linux/cpumask.h: add typechecking to cpumask_test_cpu
  cpumask: only allocate nr_cpumask_bits.
  Fix weird uses of num_online_cpus().
  cpumask: remove deprecated functions.
  mips: fix obsolete cpumask_of_cpu usage.
  x86: fix more deprecated cpu function usage.
  ia64: remove deprecated cpus_ usage.
  powerpc: fix deprecated CPU_MASK_CPU0 usage.
  CPU_MASK_ALL/CPU_MASK_NONE: remove from deprecated region.
  staging/lustre/o2iblnd: Don't use cpus_weight
  staging/lustre/libcfs: replace deprecated cpus_ calls with cpumask_
  staging/lustre/ptlrpc: Do not use deprecated cpus_* functions
  blackfin: fix up obsolete cpu function usage.
  parisc: fix up obsolete cpu function usage.
  tile: fix up obsolete cpu function usage.
  arm64: fix up obsolete cpu function usage.
  mips: fix up obsolete cpu function usage.
  x86: fix up obsolete cpu function usage.
  ...