linux-stable.git/arch/sh/include/asm, branch v5.0.2 Linux kernel stable tree Fix 'acccess_ok()' on alpha and SH 2019-01-06T21:25:45+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-01-06T19:15:04+00:00 94bd8a05cd4de344a9a57e52ef7d99550251984f Commit 594cc251fdd0 ("make 'user_access_begin()' do 'access_ok()'") broke both alpha and SH booting in qemu, as noticed by Guenter Roeck. It turns out that the bug wasn't actually in that commit itself (which would have been surprising: it was mostly a no-op), but in how the addition of access_ok() to the strncpy_from_user() and strnlen_user() functions now triggered the case where those functions would test the access of the very last byte of the user address space. The string functions actually did that user range test before too, but they did it manually by just comparing against user_addr_max(). But with user_access_begin() doing the check (using "access_ok()"), it now exposed problems in the architecture implementations of that function. For example, on alpha, the access_ok() helper macro looked like this: #define __access_ok(addr, size) \ ((get_fs().seg & (addr | size | (addr+size))) == 0) and what it basically tests is of any of the high bits get set (the USER_DS masking value is 0xfffffc0000000000). And that's completely wrong for the "addr+size" check. Because it's off-by-one for the case where we check to the very end of the user address space, which is exactly what the strn*_user() functions do. Why? Because "addr+size" will be exactly the size of the address space, so trying to access the last byte of the user address space will fail the __access_ok() check, even though it shouldn't. As a result, the user string accessor functions failed consistently - because they literally don't know how long the string is going to be, and the max access is going to be that last byte of the user address space. Side note: that alpha macro is buggy for another reason too - it re-uses the arguments twice. And SH has another version of almost the exact same bug: #define __addr_ok(addr) \ ((unsigned long __force)(addr) < current_thread_info()->addr_limit.seg) so far so good: yes, a user address must be below the limit. But then: #define __access_ok(addr, size) \ (__addr_ok((addr) + (size))) is wrong with the exact same off-by-one case: the case when "addr+size" is exactly _equal_ to the limit is actually perfectly fine (think "one byte access at the last address of the user address space") The SH version is actually seriously buggy in another way: it doesn't actually check for overflow, even though it did copy the _comment_ that talks about overflow. So it turns out that both SH and alpha actually have completely buggy implementations of access_ok(), but they happened to work in practice (although the SH overflow one is a serious serious security bug, not that anybody likely cares about SH security). This fixes the problems by using a similar macro on both alpha and SH. It isn't trying to be clever, the end address is based on this logic: unsigned long __ao_end = __ao_a + __ao_b - !!__ao_b; which basically says "add start and length, and then subtract one unless the length was zero". We can't subtract one for a zero length, or we'd just hit an underflow instead. For a lot of access_ok() users the length is a constant, so this isn't actually as expensive as it initially looks. Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
Commit 594cc251fdd0 ("make 'user_access_begin()' do 'access_ok()'")
broke both alpha and SH booting in qemu, as noticed by Guenter Roeck.

It turns out that the bug wasn't actually in that commit itself (which
would have been surprising: it was mostly a no-op), but in how the
addition of access_ok() to the strncpy_from_user() and strnlen_user()
functions now triggered the case where those functions would test the
access of the very last byte of the user address space.

The string functions actually did that user range test before too, but
they did it manually by just comparing against user_addr_max().  But
with user_access_begin() doing the check (using "access_ok()"), it now
exposed problems in the architecture implementations of that function.

For example, on alpha, the access_ok() helper macro looked like this:

  #define __access_ok(addr, size) \
        ((get_fs().seg & (addr | size | (addr+size))) == 0)

and what it basically tests is of any of the high bits get set (the
USER_DS masking value is 0xfffffc0000000000).

And that's completely wrong for the "addr+size" check.  Because it's
off-by-one for the case where we check to the very end of the user
address space, which is exactly what the strn*_user() functions do.

Why? Because "addr+size" will be exactly the size of the address space,
so trying to access the last byte of the user address space will fail
the __access_ok() check, even though it shouldn't.  As a result, the
user string accessor functions failed consistently - because they
literally don't know how long the string is going to be, and the max
access is going to be that last byte of the user address space.

Side note: that alpha macro is buggy for another reason too - it re-uses
the arguments twice.

And SH has another version of almost the exact same bug:

  #define __addr_ok(addr) \
        ((unsigned long __force)(addr) < current_thread_info()->addr_limit.seg)

so far so good: yes, a user address must be below the limit.  But then:

  #define __access_ok(addr, size)         \
        (__addr_ok((addr) + (size)))

is wrong with the exact same off-by-one case: the case when "addr+size"
is exactly _equal_ to the limit is actually perfectly fine (think "one
byte access at the last address of the user address space")

The SH version is actually seriously buggy in another way: it doesn't
actually check for overflow, even though it did copy the _comment_ that
talks about overflow.

So it turns out that both SH and alpha actually have completely buggy
implementations of access_ok(), but they happened to work in practice
(although the SH overflow one is a serious serious security bug, not
that anybody likely cares about SH security).

This fixes the problems by using a similar macro on both alpha and SH.
It isn't trying to be clever, the end address is based on this logic:

        unsigned long __ao_end = __ao_a + __ao_b - !!__ao_b;

which basically says "add start and length, and then subtract one unless
the length was zero".  We can't subtract one for a zero length, or we'd
just hit an underflow instead.

For a lot of access_ok() users the length is a constant, so this isn't
actually as expensive as it initially looks.

Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge branch 'akpm' (patches from Andrew) 2019-01-05T17:16:18+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-01-05T17:16:18+00:00 a65981109f294ba7e64b33ad3b4575a4636fce66 Merge more updates from Andrew Morton: - procfs updates - various misc bits - lib/ updates - epoll updates - autofs - fatfs - a few more MM bits * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (58 commits) mm/page_io.c: fix polled swap page in checkpatch: add Co-developed-by to signature tags docs: fix Co-Developed-by docs drivers/base/platform.c: kmemleak ignore a known leak fs: don't open code lru_to_page() fs/: remove caller signal_pending branch predictions mm/: remove caller signal_pending branch predictions arch/arc/mm/fault.c: remove caller signal_pending_branch predictions kernel/sched/: remove caller signal_pending branch predictions kernel/locking/mutex.c: remove caller signal_pending branch predictions mm: select HAVE_MOVE_PMD on x86 for faster mremap mm: speed up mremap by 20x on large regions mm: treewide: remove unused address argument from pte_alloc functions initramfs: cleanup incomplete rootfs scripts/gdb: fix lx-version string output kernel/kcov.c: mark write_comp_data() as notrace kernel/sysctl: add panic_print into sysctl panic: add options to print system info when panic happens bfs: extra sanity checking and static inode bitmap exec: separate MM_ANONPAGES and RLIMIT_STACK accounting ... 
Merge more updates from Andrew Morton:

 - procfs updates

 - various misc bits

 - lib/ updates

 - epoll updates

 - autofs

 - fatfs

 - a few more MM bits

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (58 commits)
  mm/page_io.c: fix polled swap page in
  checkpatch: add Co-developed-by to signature tags
  docs: fix Co-Developed-by docs
  drivers/base/platform.c: kmemleak ignore a known leak
  fs: don't open code lru_to_page()
  fs/: remove caller signal_pending branch predictions
  mm/: remove caller signal_pending branch predictions
  arch/arc/mm/fault.c: remove caller signal_pending_branch predictions
  kernel/sched/: remove caller signal_pending branch predictions
  kernel/locking/mutex.c: remove caller signal_pending branch predictions
  mm: select HAVE_MOVE_PMD on x86 for faster mremap
  mm: speed up mremap by 20x on large regions
  mm: treewide: remove unused address argument from pte_alloc functions
  initramfs: cleanup incomplete rootfs
  scripts/gdb: fix lx-version string output
  kernel/kcov.c: mark write_comp_data() as notrace
  kernel/sysctl: add panic_print into sysctl
  panic: add options to print system info when panic happens
  bfs: extra sanity checking and static inode bitmap
  exec: separate MM_ANONPAGES and RLIMIT_STACK accounting
  ...
mm: treewide: remove unused address argument from pte_alloc functions 2019-01-04T21:13:47+00:00 Joel Fernandes (Google) joel@joelfernandes.org 2019-01-03T23:28:34+00:00 4cf58924951ef80eec636b863e7a53973c44261a Patch series "Add support for fast mremap". This series speeds up the mremap(2) syscall by copying page tables at the PMD level even for non-THP systems. There is concern that the extra 'address' argument that mremap passes to pte_alloc may do something subtle architecture related in the future that may make the scheme not work. Also we find that there is no point in passing the 'address' to pte_alloc since its unused. This patch therefore removes this argument tree-wide resulting in a nice negative diff as well. Also ensuring along the way that the enabled architectures do not do anything funky with the 'address' argument that goes unnoticed by the optimization. Build and boot tested on x86-64. Build tested on arm64. The config enablement patch for arm64 will be posted in the future after more testing. The changes were obtained by applying the following Coccinelle script. (thanks Julia for answering all Coccinelle questions!). Following fix ups were done manually: * Removal of address argument from pte_fragment_alloc * Removal of pte_alloc_one_fast definitions from m68k and microblaze. // Options: --include-headers --no-includes // Note: I split the 'identifier fn' line, so if you are manually // running it, please unsplit it so it runs for you. virtual patch @pte_alloc_func_def depends on patch exists@ identifier E2; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; type T2; @@ fn(... - , T2 E2 ) { ... } @pte_alloc_func_proto_noarg depends on patch exists@ type T1, T2, T3, T4; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ ( - T3 fn(T1, T2); + T3 fn(T1); | - T3 fn(T1, T2, T4); + T3 fn(T1, T2); ) @pte_alloc_func_proto depends on patch exists@ identifier E1, E2, E4; type T1, T2, T3, T4; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ ( - T3 fn(T1 E1, T2 E2); + T3 fn(T1 E1); | - T3 fn(T1 E1, T2 E2, T4 E4); + T3 fn(T1 E1, T2 E2); ) @pte_alloc_func_call depends on patch exists@ expression E2; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ fn(... -, E2 ) @pte_alloc_macro depends on patch exists@ identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; identifier a, b, c; expression e; position p; @@ ( - #define fn(a, b, c) e + #define fn(a, b) e | - #define fn(a, b) e + #define fn(a) e ) Link: http://lkml.kernel.org/r/20181108181201.88826-2-joelaf@google.com Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Suggested-by: Kirill A. Shutemov <kirill@shutemov.name> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michal Hocko <mhocko@kernel.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
Patch series "Add support for fast mremap".

This series speeds up the mremap(2) syscall by copying page tables at
the PMD level even for non-THP systems.  There is concern that the extra
'address' argument that mremap passes to pte_alloc may do something
subtle architecture related in the future that may make the scheme not
work.  Also we find that there is no point in passing the 'address' to
pte_alloc since its unused.  This patch therefore removes this argument
tree-wide resulting in a nice negative diff as well.  Also ensuring
along the way that the enabled architectures do not do anything funky
with the 'address' argument that goes unnoticed by the optimization.

Build and boot tested on x86-64.  Build tested on arm64.  The config
enablement patch for arm64 will be posted in the future after more
testing.

The changes were obtained by applying the following Coccinelle script.
(thanks Julia for answering all Coccinelle questions!).
Following fix ups were done manually:
* Removal of address argument from  pte_fragment_alloc
* Removal of pte_alloc_one_fast definitions from m68k and microblaze.

// Options: --include-headers --no-includes
// Note: I split the 'identifier fn' line, so if you are manually
// running it, please unsplit it so it runs for you.

virtual patch

@pte_alloc_func_def depends on patch exists@
identifier E2;
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
type T2;
@@

 fn(...
- , T2 E2
 )
 { ... }

@pte_alloc_func_proto_noarg depends on patch exists@
type T1, T2, T3, T4;
identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
@@

(
- T3 fn(T1, T2);
+ T3 fn(T1);
|
- T3 fn(T1, T2, T4);
+ T3 fn(T1, T2);
)

@pte_alloc_func_proto depends on patch exists@
identifier E1, E2, E4;
type T1, T2, T3, T4;
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
@@

(
- T3 fn(T1 E1, T2 E2);
+ T3 fn(T1 E1);
|
- T3 fn(T1 E1, T2 E2, T4 E4);
+ T3 fn(T1 E1, T2 E2);
)

@pte_alloc_func_call depends on patch exists@
expression E2;
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
@@

 fn(...
-,  E2
 )

@pte_alloc_macro depends on patch exists@
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
identifier a, b, c;
expression e;
position p;
@@

(
- #define fn(a, b, c) e
+ #define fn(a, b) e
|
- #define fn(a, b) e
+ #define fn(a) e
)

Link: http://lkml.kernel.org/r/20181108181201.88826-2-joelaf@google.com
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Suggested-by: Kirill A. Shutemov <kirill@shutemov.name>
Acked-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove 'type' argument from access_ok() function 2019-01-04T02:57:57+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-01-04T02:57:57+00:00 96d4f267e40f9509e8a66e2b39e8b95655617693 Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.

It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access.  But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.

A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model.  And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.

This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.

There were a couple of notable cases:

 - csky still had the old "verify_area()" name as an alias.

 - the iter_iov code had magical hardcoded knowledge of the actual
   values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
   really used it)

 - microblaze used the type argument for a debug printout

but other than those oddities this should be a total no-op patch.

I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something.  Any missed conversion should be trivially fixable, though.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge branch 'akpm' (patches from Andrew) 2018-12-29T00:55:46+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-12-29T00:55:46+00:00 f346b0becb1bc62e45495f9cdbae3eef35d0b635 Merge misc updates from Andrew Morton: - large KASAN update to use arm's "software tag-based mode" - a few misc things - sh updates - ocfs2 updates - just about all of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (167 commits) kernel/fork.c: mark 'stack_vm_area' with __maybe_unused memcg, oom: notify on oom killer invocation from the charge path mm, swap: fix swapoff with KSM pages include/linux/gfp.h: fix typo mm/hmm: fix memremap.h, move dev_page_fault_t callback to hmm hugetlbfs: Use i_mmap_rwsem to fix page fault/truncate race hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization memory_hotplug: add missing newlines to debugging output mm: remove __hugepage_set_anon_rmap() include/linux/vmstat.h: remove unused page state adjustment macro mm/page_alloc.c: allow error injection mm: migrate: drop unused argument of migrate_page_move_mapping() blkdev: avoid migration stalls for blkdev pages mm: migrate: provide buffer_migrate_page_norefs() mm: migrate: move migrate_page_lock_buffers() mm: migrate: lock buffers before migrate_page_move_mapping() mm: migration: factor out code to compute expected number of page references mm, page_alloc: enable pcpu_drain with zone capability kmemleak: add config to select auto scan mm/page_alloc.c: don't call kasan_free_pages() at deferred mem init ... 
Merge misc updates from Andrew Morton:

 - large KASAN update to use arm's "software tag-based mode"

 - a few misc things

 - sh updates

 - ocfs2 updates

 - just about all of MM

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (167 commits)
  kernel/fork.c: mark 'stack_vm_area' with __maybe_unused
  memcg, oom: notify on oom killer invocation from the charge path
  mm, swap: fix swapoff with KSM pages
  include/linux/gfp.h: fix typo
  mm/hmm: fix memremap.h, move dev_page_fault_t callback to hmm
  hugetlbfs: Use i_mmap_rwsem to fix page fault/truncate race
  hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
  memory_hotplug: add missing newlines to debugging output
  mm: remove __hugepage_set_anon_rmap()
  include/linux/vmstat.h: remove unused page state adjustment macro
  mm/page_alloc.c: allow error injection
  mm: migrate: drop unused argument of migrate_page_move_mapping()
  blkdev: avoid migration stalls for blkdev pages
  mm: migrate: provide buffer_migrate_page_norefs()
  mm: migrate: move migrate_page_lock_buffers()
  mm: migrate: lock buffers before migrate_page_move_mapping()
  mm: migration: factor out code to compute expected number of page references
  mm, page_alloc: enable pcpu_drain with zone capability
  kmemleak: add config to select auto scan
  mm/page_alloc.c: don't call kasan_free_pages() at deferred mem init
  ...
Merge tag 'y2038-for-4.21' of ssh://gitolite.kernel.org:/pub/scm/linux/kernel/git/arnd/playground 2018-12-28T20:45:04+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-12-28T20:45:04+00:00 b12a9124eeb71d766a3e3eb594ebbb3fefc66902 Pull y2038 updates from Arnd Bergmann: "More syscalls and cleanups This concludes the main part of the system call rework for 64-bit time_t, which has spread over most of year 2018, the last six system calls being - ppoll - pselect6 - io_pgetevents - recvmmsg - futex - rt_sigtimedwait As before, nothing changes for 64-bit architectures, while 32-bit architectures gain another entry point that differs only in the layout of the timespec structure. Hopefully in the next release we can wire up all 22 of those system calls on all 32-bit architectures, which gives us a baseline version for glibc to start using them. This does not include the clock_adjtime, getrusage/waitid, and getitimer/setitimer system calls. I still plan to have new versions of those as well, but they are not required for correct operation of the C library since they can be emulated using the old 32-bit time_t based system calls. Aside from the system calls, there are also a few cleanups here, removing old kernel internal interfaces that have become unused after all references got removed. The arch/sh cleanups are part of this, there were posted several times over the past year without a reaction from the maintainers, while the corresponding changes made it into all other architectures" * tag 'y2038-for-4.21' of ssh://gitolite.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: timekeeping: remove obsolete time accessors vfs: replace current_kernel_time64 with ktime equivalent timekeeping: remove timespec_add/timespec_del timekeeping: remove unused {read,update}_persistent_clock sh: remove board_time_init() callback sh: remove unused rtc_sh_get/set_time infrastructure sh: sh03: rtc: push down rtc class ops into driver sh: dreamcast: rtc: push down rtc class ops into driver y2038: signal: Add compat_sys_rt_sigtimedwait_time64 y2038: signal: Add sys_rt_sigtimedwait_time32 y2038: socket: Add compat_sys_recvmmsg_time64 y2038: futex: Add support for __kernel_timespec y2038: futex: Move compat implementation into futex.c io_pgetevents: use __kernel_timespec pselect6: use __kernel_timespec ppoll: use __kernel_timespec signal: Add restore_user_sigmask() signal: Add set_user_sigmask() 
Pull y2038 updates from Arnd Bergmann:
 "More syscalls and cleanups

  This concludes the main part of the system call rework for 64-bit
  time_t, which has spread over most of year 2018, the last six system
  calls being

    - ppoll
    - pselect6
    - io_pgetevents
    - recvmmsg
    - futex
    - rt_sigtimedwait

  As before, nothing changes for 64-bit architectures, while 32-bit
  architectures gain another entry point that differs only in the layout
  of the timespec structure. Hopefully in the next release we can wire
  up all 22 of those system calls on all 32-bit architectures, which
  gives us a baseline version for glibc to start using them.

  This does not include the clock_adjtime, getrusage/waitid, and
  getitimer/setitimer system calls. I still plan to have new versions of
  those as well, but they are not required for correct operation of the
  C library since they can be emulated using the old 32-bit time_t based
  system calls.

  Aside from the system calls, there are also a few cleanups here,
  removing old kernel internal interfaces that have become unused after
  all references got removed. The arch/sh cleanups are part of this,
  there were posted several times over the past year without a reaction
  from the maintainers, while the corresponding changes made it into all
  other architectures"

* tag 'y2038-for-4.21' of ssh://gitolite.kernel.org:/pub/scm/linux/kernel/git/arnd/playground:
  timekeeping: remove obsolete time accessors
  vfs: replace current_kernel_time64 with ktime equivalent
  timekeeping: remove timespec_add/timespec_del
  timekeeping: remove unused {read,update}_persistent_clock
  sh: remove board_time_init() callback
  sh: remove unused rtc_sh_get/set_time infrastructure
  sh: sh03: rtc: push down rtc class ops into driver
  sh: dreamcast: rtc: push down rtc class ops into driver
  y2038: signal: Add compat_sys_rt_sigtimedwait_time64
  y2038: signal: Add sys_rt_sigtimedwait_time32
  y2038: socket: Add compat_sys_recvmmsg_time64
  y2038: futex: Add support for __kernel_timespec
  y2038: futex: Move compat implementation into futex.c
  io_pgetevents: use __kernel_timespec
  pselect6: use __kernel_timespec
  ppoll: use __kernel_timespec
  signal: Add restore_user_sigmask()
  signal: Add set_user_sigmask()
sh: include: convert to SPDX identifiers 2018-12-28T20:11:45+00:00 Kuninori Morimoto kuninori.morimoto.gx@renesas.com 2018-12-28T08:31:53+00:00 6a0abce4c4cce0890e2c930b960b9a05c8c6e5da Update license to use SPDX-License-Identifier instead of verbose license text. Link: http://lkml.kernel.org/r/87ftvccszx.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
Update license to use SPDX-License-Identifier instead of verbose license
text.

Link: http://lkml.kernel.org/r/87ftvccszx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'asm-generic-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic 2018-12-26T18:23:12+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-12-26T18:23:12+00:00 507413a5f88a2240b2c19cb4318166614e2349d9 Pull arch/sh syscall table scripting from Arnd Bergmann: "I worked with Firoz Khan to change all architectures to have their system call tables (syscall.S and asm/unistd.h) generated by a script from a more readable input file the same way that we already had on x86, s390 and arm. I offered to take those conversions through the asm-generic tree that did not get picked up by the architecture maintainers, and fortunately all but one have now been accepted into arch maintainer trees, so this branch only contains the conversion for arch/sh/, with permission from Rich. The conversion does not include the old 64-bit sh5 architecture, which has never shipped and not even compiled in a long time. The table in include/uapi/asm/unistd.h is also not included here, as Firoz is still working on that one, it will have to wait for the next following merge window, hopefully together with the addition of the 64-bit time_t system calls for the y2038 work that led to the system call table rework" * tag 'asm-generic-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: sh: generate uapi header and syscall table header files sh: add system call table generation support sh: add __NR_syscalls along with NR_syscalls 
Pull arch/sh syscall table scripting from Arnd Bergmann:
 "I worked with Firoz Khan to change all architectures to have their
  system call tables (syscall.S and asm/unistd.h) generated by a script
  from a more readable input file the same way that we already had on
  x86, s390 and arm.

  I offered to take those conversions through the asm-generic tree that
  did not get picked up by the architecture maintainers, and fortunately
  all but one have now been accepted into arch maintainer trees, so this
  branch only contains the conversion for arch/sh/, with permission from
  Rich.

  The conversion does not include the old 64-bit sh5 architecture, which
  has never shipped and not even compiled in a long time. The table in
  include/uapi/asm/unistd.h is also not included here, as Firoz is still
  working on that one, it will have to wait for the next following merge
  window, hopefully together with the addition of the 64-bit time_t
  system calls for the y2038 work that led to the system call table
  rework"

* tag 'asm-generic-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  sh: generate uapi header and syscall table header files
  sh: add system call table generation support
  sh: add __NR_syscalls along with NR_syscalls
sh: generate uapi header and syscall table header files 2018-12-19T16:54:40+00:00 Firoz Khan firoz.khan@linaro.org 2018-11-14T04:32:10+00:00 2b3c5a99d5f314960e00950c1782eac9361de30f System call table generation script must be run to gener- ate unistd_32.h and syscall_table.h files. This patch will have changes which will invokes the script. This patch will generate unistd_32.h and syscall_table.h files by the syscall table generation script invoked by sh/Makefile and the generated files against the removed files must be identical. The generated uapi header file will be included in uapi/- asm/unistd.h and generated system call table header file will be included by kernel/syscall_32.S file. Signed-off-by: Firoz Khan <firoz.khan@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
System call table generation script must be run to gener-
ate unistd_32.h and syscall_table.h files. This patch will
have changes which will invokes the script.

This patch will generate unistd_32.h and syscall_table.h
files by the syscall table generation script invoked by
sh/Makefile and the generated files against the removed
files must be identical.

The generated uapi header file will be included in uapi/-
asm/unistd.h and generated system call table header file
will be included by kernel/syscall_32.S file.

Signed-off-by: Firoz Khan <firoz.khan@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
sh: add __NR_syscalls along with NR_syscalls 2018-12-19T16:53:46+00:00 Firoz Khan firoz.khan@linaro.org 2018-11-14T04:32:08+00:00 8a79633b4928cbb7cb575aa62dda0c49d37c2387 NR_syscalls macro holds the number of system call exist in sh architecture. We have to change the value of NR- _syscalls, if we add or delete a system call. One of the patch in this patch series has a script which will generate a uapi header based on syscall.tbl file. The syscall.tbl file contains the total number of system calls information. So we have two option to update NR_sy- scalls value. 1. Update NR_syscalls in asm/unistd.h manually by count- ing the no.of system calls. No need to update NR_sys- calls until we either add a new system call or delete existing system call. 2. We can keep this feature it above mentioned script, that will count the number of syscalls and keep it in a generated file. In this case we don't need to expli- citly update NR_syscalls in asm/unistd.h file. The 2nd option will be the recommended one. For that, I added the __NR_syscalls macro in uapi/asm/unistd_32/64.h along with NR_syscalls which is moved to asm/unistd.h. The macro __NR_syscalls also added for making the name convention same across all architecture. While __NR_sys- calls isn't strictly part of the uapi, having it as part of the generated header to simplifies the implementation. We also need to enclose this macro with #ifdef __KERNEL__ to avoid side effects. Signed-off-by: Firoz Khan <firoz.khan@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
NR_syscalls macro holds the number of system call exist
in sh architecture. We have to change the value of NR-
_syscalls, if we add or delete a system call.

One of the patch in this patch series has a script which
will generate a uapi header based on syscall.tbl file.
The syscall.tbl file contains the total number of system
calls information. So we have two option to update NR_sy-
scalls value.

1. Update NR_syscalls in asm/unistd.h manually by count-
   ing the no.of system calls. No need to update NR_sys-
   calls until we either add a new system call or delete
   existing system call.

2. We can keep this feature it above mentioned script,
   that will count the number of syscalls and keep it in
   a generated file. In this case we don't need to expli-
   citly update NR_syscalls in asm/unistd.h file.

The 2nd option will be the recommended one. For that, I
added the __NR_syscalls macro in uapi/asm/unistd_32/64.h
along with NR_syscalls which is moved to asm/unistd.h.
The macro __NR_syscalls also added for making the name
convention same across all architecture. While __NR_sys-
calls isn't strictly part of the uapi, having it as part
of the generated header to simplifies the implementation.
We also need to enclose this macro with #ifdef __KERNEL__
to avoid side effects.

Signed-off-by: Firoz Khan <firoz.khan@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>