linux-stable.git/arch/sh/boot, branch linux-4.3.y

lib/decompressors: use real out buf size for gunzip with kernel

2015-09-10T20:29:01+00:00

When loading x86 64bit kernel above 4GiB with patched grub2, got kernel
gunzip error.

| early console in decompress_kernel
| decompress_kernel:
|       input: [0x807f2143b4-0x807ff61aee]
|      output: [0x807cc00000-0x807f3ea29b] 0x027ea29c: output_len
| boot via startup_64
| KASLR using RDTSC...
|  new output: [0x46fe000000-0x470138cfff] 0x0338d000: output_run_size
|  decompress: [0x46fe000000-0x47007ea29b] <=== [0x807f2143b4-0x807ff61aee]
|
| Decompressing Linux... gz...
|
| uncompression error
|
| -- System halted

the new buffer is at 0x46fe000000ULL, decompressor_gzip is using
0xffffffb901ffffff as out_len.  gunzip in lib/zlib_inflate/inflate.c cap
that len to 0x01ffffff and decompress fails later.

We could hit this problem with crashkernel booting that uses kexec loading
kernel above 4GiB.

We have decompress_* support:
    1. inbuf[]/outbuf[] for kernel preboot.
    2. inbuf[]/flush() for initramfs
    3. fill()/flush() for initrd.
This bug only affect kernel preboot path that use outbuf[].

Add __decompress and take real out_buf_len for gunzip instead of guessing
wrong buf size.

Fixes: 1431574a1c4 (lib/decompressors: fix "no limit" output buffer length)
Signed-off-by: Yinghai Lu 
Cc: Alexandre Courbot 
Cc: Jon Medhurst 
Cc: Stephen Warren 
Cc: "H. Peter Anvin" 
Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Kbuild: centralize MKIMAGE and cmd_uimage definitions

2012-03-26T13:49:20+00:00

All ARCHs have the same definition of MKIMAGE. Move it to Makefile.lib
to avoid duplication.

All ARCHs have similar definitions of cmd_uimage. Place a sufficiently
parameterized version in Makefile.lib to avoid duplication.

Signed-off-by: Stephen Warren 
Acked-by: Nicolas Pitre 
Tested-by: Mike Frysinger  [Blackfin]
Tested-by: Michal Simek  [Microblaze]
Tested-by: Guan Xuetao  [unicore32]
Signed-off-by: Michal Marek

sh: kexec: Add PHYSICAL_START

2011-10-28T06:03:43+00:00

Add PHYSICAL_START kernel configuration parameter to set the address at
which the kernel should be loaded.

It has been observed on an sh7757lcr that simply modifying MEMORY_START
does not achieve this goal for 32bit sh. This is due to MEMORY_OFFSET in
arch/sh/kernel/vmlinux.lds.S bot being based on MEMORY_START on such
systems.

Signed-off-by: Simon Horman 
Signed-off-by: Paul Mundt

sh: Remove compressed kernel libgcc dependency.

2011-06-06T08:57:58+00:00

SH-2A is unable to combine the kernel and libgcc objects due to
fundamental disagreements over FDPIC settings. As the kernel already
contains all of the libgcc bits broken out, there's not much need to
bother with the linking anymore, as everything can already be derived
from the lib dir.

This simply plugs in the necessary bits to ensure that everything is
built uniformly, enabling us to wean the compressed build off of explicit
libgcc linking.

Reported-by: Phil Edworthy 
Signed-off-by: Paul Mundt

mmc: Add MMC_PROGRESS_*

2011-03-24T16:24:57+00:00

This is my second attempt to make this enum generally available.
The first attempt added MMCIF_PROGRESS_* to include/linux/mmc/sh_mmcif.h.
However this is not sufficiently generic as the enum will be
used by SDHI boot code.

Signed-off-by: Simon Horman 
Signed-off-by: Paul Mundt

sh: Enable CONFIG_GCOV_PROFILE_ALL for sh

2011-02-15T07:47:17+00:00

This patch enables gcov kernel profiling over the whole kernel for sh.
Profiling of specific files individually already worked. A handful of
files have to be explicitly excluded from the profiling to avoid
breaking things, notably pmb.c.

Signed-off-by: Chris Smith 
Signed-off-by: Stuart Menefy 
Signed-off-by: Paul Mundt

sh: support XZ-compressed kernel.

2011-01-14T06:52:54+00:00

Follow the x86 change and wire up support for the XZ decompressor.

Signed-off-by: Paul Mundt

mmc, sh: Remove sh_mmcif_boot_slurp()

2010-12-08T07:24:28+00:00

As the only caller of sh_mmcif_boot_do_read() is
sh_mmcif_boot_slurp() the configuration portion of
sh_mmcif_boot_slurp() can be merged into sh_mmcif_boot_do_read().

Once this is done sh_mmcif_boot_slurp() is only a call
to sh_mmcif_boot_do_read() with platform specific information -
the offset that images are stored on MMC. So make the
sh_mmcif_boot_do_read() call directly from platform code
and remove sh_mmcif_boot_slurp() altogether.

Cc: Magnus Damm 
Signed-off-by: Simon Horman 
Signed-off-by: Paul Mundt

mmc, sh: Move MMCIF_PROGRESS_* into sh_mmcif.h

2010-12-08T07:24:21+00:00

Allow MMCIF_PROGRESS_* to be shared.

Cc: Magnus Damm 
Signed-off-by: Simon Horman 
Signed-off-by: Paul Mundt

sh: boot kernel with SR.BL set

2010-09-30T00:43:32+00:00

Update the SH kernel to keep SR.BL set until the VBR
register has been initialized. Useful to allow boot
of the kernel even though exceptions are pending.

Without this patch there is a window of time when
exceptions such as NMI are enabled but no exception
handlers are installed.

This patch modifies both the zImage loader and the
actual kernel to boot with BL=1, but the zImage
loader is modfied in such a way that the init_sr
value is unchanged to not break the zImage loader
provided by kexec.

Tested on sh7724 Ecovec and on the SH4AL-DSP core
included in sh7372.

Signed-off-by: Magnus Damm 
Signed-off-by: Paul Mundt