linux-stable.git/arch/s390/kernel, branch linux-4.4.y

s390/setup: avoid using memblock_enforce_memory_limit

2021-12-08T07:44:07+00:00

[ Upstream commit 5dbc4cb4667457b0c53bcd7bff11500b3c362975 ]

There is a difference in how architectures treat "mem=" option. For some
that is an amount of online memory, for s390 and x86 this is the limiting
max address. Some memblock api like memblock_enforce_memory_limit()
take limit argument and explicitly treat it as the size of online memory,
and use __find_max_addr to convert it to an actual max address. Current
s390 usage:

memblock_enforce_memory_limit(memblock_end_of_DRAM());

yields different results depending on presence of memory holes (offline
memory blocks in between online memory). If there are no memory holes
limit == max_addr in memblock_enforce_memory_limit() and it does trim
online memory and reserved memory regions. With memory holes present it
actually does nothing.

Since we already use memblock_remove() explicitly to trim online memory
regions to potential limit (think mem=, kdump, addressing limits, etc.)
drop the usage of memblock_enforce_memory_limit() altogether. Trimming
reserved regions should not be required, since we now use
memblock_set_current_limit() to limit allocations and any explicit memory
reservations above the limit is an actual problem we should not hide.

Reviewed-by: Heiko Carstens 
Signed-off-by: Vasily Gorbik 
Signed-off-by: Heiko Carstens 
Signed-off-by: Sasha Levin

s390/jump_label: print real address in a case of a jump label bug

2021-09-22T09:41:25+00:00

[ Upstream commit 5492886c14744d239e87f1b0b774b5a341e755cc ]

In case of a jump label print the real address of the piece of code
where a mismatch was detected. This is right before the system panics,
so there is nothing revealed.

Signed-off-by: Heiko Carstens 
Signed-off-by: Sasha Levin

s390/disassembler: correct disassembly lines alignment

2021-09-22T09:41:18+00:00

commit 26f4e759ef9b8a2bab1823d692ed6d56d40b66e3 upstream.

176.718956 Krnl Code: 00000000004d38b0: a54c0018        llihh   %r4,24
176.718956 	   00000000004d38b4: b9080014        agr     %r1,%r4
           ^
Using a tab to align disassembly lines which follow the first line with
"Krnl Code: " doesn't always work, e.g. if there is a prefix (timestamp
or syslog prefix) which is not 8 chars aligned. Go back to alignment
with spaces.

Fixes: b192571d1ae3 ("s390/disassembler: increase show_code buffer size")
Signed-off-by: Vasily Gorbik 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Greg Kroah-Hartman

s390/ftrace: fix ftrace_update_ftrace_func implementation

2021-07-28T07:12:36+00:00

commit f8c2602733c953ed7a16e060640b8e96f9d94b9b upstream.

s390 enforces DYNAMIC_FTRACE if FUNCTION_TRACER is selected.
At the same time implementation of ftrace_caller is not compliant with
HAVE_DYNAMIC_FTRACE since it doesn't provide implementation of
ftrace_update_ftrace_func() and calls ftrace_trace_function() directly.

The subtle difference is that during ftrace code patching ftrace
replaces function tracer via ftrace_update_ftrace_func() and activates
it back afterwards. Unexpected direct calls to ftrace_trace_function()
during ftrace code patching leads to nullptr-dereferences when tracing
is activated for one of functions which are used during code patching.
Those function currently are:
copy_from_kernel_nofault()
copy_from_kernel_nofault_allowed()
preempt_count_sub() [with debug_defconfig]
preempt_count_add() [with debug_defconfig]

Corresponding KASAN report:
 BUG: KASAN: nullptr-dereference in function_trace_call+0x316/0x3b0
 Read of size 4 at addr 0000000000001e08 by task migration/0/15

 CPU: 0 PID: 15 Comm: migration/0 Tainted: G B 5.13.0-41423-g08316af3644d
 Hardware name: IBM 3906 M04 704 (LPAR)
 Stopper: multi_cpu_stop+0x0/0x3e0 <- stop_machine_cpuslocked+0x1e4/0x218
 Call Trace:
  [<0000000001f77caa>] show_stack+0x16a/0x1d0
  [<0000000001f8de42>] dump_stack+0x15a/0x1b0
  [<0000000001f81d56>] print_address_description.constprop.0+0x66/0x2e0
  [<000000000082b0ca>] kasan_report+0x152/0x1c0
  [<00000000004cfd8e>] function_trace_call+0x316/0x3b0
  [<0000000001fb7082>] ftrace_caller+0x7a/0x7e
  [<00000000006bb3e6>] copy_from_kernel_nofault_allowed+0x6/0x10
  [<00000000006bb42e>] copy_from_kernel_nofault+0x3e/0xd0
  [<000000000014605c>] ftrace_make_call+0xb4/0x1f8
  [<000000000047a1b4>] ftrace_replace_code+0x134/0x1d8
  [<000000000047a6e0>] ftrace_modify_all_code+0x120/0x1d0
  [<000000000047a7ec>] __ftrace_modify_code+0x5c/0x78
  [<000000000042395c>] multi_cpu_stop+0x224/0x3e0
  [<0000000000423212>] cpu_stopper_thread+0x33a/0x5a0
  [<0000000000243ff2>] smpboot_thread_fn+0x302/0x708
  [<00000000002329ea>] kthread+0x342/0x408
  [<00000000001066b2>] __ret_from_fork+0x92/0xf0
  [<0000000001fb57fa>] ret_from_fork+0xa/0x30

 The buggy address belongs to the page:
 page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1
 flags: 0x1ffff00000001000(reserved|node=0|zone=0|lastcpupid=0x1ffff)
 raw: 1ffff00000001000 0000040000000048 0000040000000048 0000000000000000
 raw: 0000000000000000 0000000000000000 ffffffff00000001 0000000000000000
 page dumped because: kasan: bad access detected

 Memory state around the buggy address:
  0000000000001d00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
  0000000000001d80: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
 >0000000000001e00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
                       ^
  0000000000001e80: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
  0000000000001f00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
 ==================================================================

To fix that introduce ftrace_func callback to be called from
ftrace_caller and update it in ftrace_update_ftrace_func().

Fixes: 4cc9bed034d1 ("[S390] cleanup ftrace backend functions")
Cc: stable@vger.kernel.org
Reviewed-by: Heiko Carstens 
Signed-off-by: Vasily Gorbik 
Signed-off-by: Heiko Carstens 
Signed-off-by: Greg Kroah-Hartman

s390/disassembler: increase ebpf disasm buffer size

2021-05-22T08:38:16+00:00

commit 6f3353c2d2b3eb4de52e9704cb962712033db181 upstream.

Current ebpf disassembly buffer size of 64 is too small. E.g. this line
takes 65 bytes:
01fffff8005822e: ec8100ed8065\tclgrj\t%r8,%r1,8,001fffff80058408\n\0

Double the buffer size like it is done for the kernel disassembly buffer.

Fixes the following KASAN finding:

UG: KASAN: stack-out-of-bounds in print_fn_code+0x34c/0x380
Write of size 1 at addr 001fff800ad5f970 by task test_progs/853

CPU: 53 PID: 853 Comm: test_progs Not tainted
5.12.0-rc7-23786-g23457d86b1f0-dirty #19
Hardware name: IBM 3906 M04 704 (LPAR)
Call Trace:
 [<0000000cd8e0538a>] show_stack+0x17a/0x1668
 [<0000000cd8e2a5d8>] dump_stack+0x140/0x1b8
 [<0000000cd8e16e74>] print_address_description.constprop.0+0x54/0x260
 [<0000000cd75a8698>] kasan_report+0xc8/0x130
 [<0000000cd6e26da4>] print_fn_code+0x34c/0x380
 [<0000000cd6ea0f4e>] bpf_int_jit_compile+0xe3e/0xe58
 [<0000000cd72c4c88>] bpf_prog_select_runtime+0x5b8/0x9c0
 [<0000000cd72d1bf8>] bpf_prog_load+0xa78/0x19c0
 [<0000000cd72d7ad6>] __do_sys_bpf.part.0+0x18e/0x768
 [<0000000cd6e0f392>] do_syscall+0x12a/0x220
 [<0000000cd8e333f8>] __do_syscall+0x98/0xc8
 [<0000000cd8e54834>] system_call+0x6c/0x94
1 lock held by test_progs/853:
 #0: 0000000cd9bf7460 (report_lock){....}-{2:2}, at:
     kasan_report+0x96/0x130

addr 001fff800ad5f970 is located in stack of task test_progs/853 at
offset 96 in frame:
 print_fn_code+0x0/0x380
this frame has 1 object:
 [32, 96) 'buffer'

Memory state around the buggy address:
 001fff800ad5f800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 001fff800ad5f880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>001fff800ad5f900: 00 00 f1 f1 f1 f1 00 00 00 00 00 00 00 00 f3 f3
                                                             ^
 001fff800ad5f980: f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 001fff800ad5fa00: 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 00 00

Cc: 
Reviewed-by: Heiko Carstens 
Signed-off-by: Vasily Gorbik 
Signed-off-by: Heiko Carstens 
Signed-off-by: Greg Kroah-Hartman

s390/entry: save the caller of psw_idle

2021-04-28T10:05:47+00:00

[ Upstream commit a994eddb947ea9ebb7b14d9a1267001699f0a136 ]

Currently psw_idle does not allocate a stack frame and does not
save its r14 and r15 into the save area. Even though this is valid from
call ABI point of view, because psw_idle does not make any calls
explicitly, in reality psw_idle is an entry point for controlled
transition into serving interrupts. So, in practice, psw_idle stack
frame is analyzed during stack unwinding. Depending on build options
that r14 slot in the save area of psw_idle might either contain a value
saved by previous sibling call or complete garbage.

  [task    0000038000003c28] do_ext_irq+0xd6/0x160
  [task    0000038000003c78] ext_int_handler+0xba/0xe8
  [task   *0000038000003dd8] psw_idle_exit+0x0/0x8 <-- pt_regs
 ([task    0000038000003dd8] 0x0)
  [task    0000038000003e10] default_idle_call+0x42/0x148
  [task    0000038000003e30] do_idle+0xce/0x160
  [task    0000038000003e70] cpu_startup_entry+0x36/0x40
  [task    0000038000003ea0] arch_call_rest_init+0x76/0x80

So, to make a stacktrace nicer and actually point for the real caller of
psw_idle in this frequently occurring case, make psw_idle save its r14.

  [task    0000038000003c28] do_ext_irq+0xd6/0x160
  [task    0000038000003c78] ext_int_handler+0xba/0xe8
  [task   *0000038000003dd8] psw_idle_exit+0x0/0x6 <-- pt_regs
 ([task    0000038000003dd8] arch_cpu_idle+0x3c/0xd0)
  [task    0000038000003e10] default_idle_call+0x42/0x148
  [task    0000038000003e30] do_idle+0xce/0x160
  [task    0000038000003e70] cpu_startup_entry+0x36/0x40
  [task    0000038000003ea0] arch_call_rest_init+0x76/0x80

Reviewed-by: Sven Schnelle 
Signed-off-by: Vasily Gorbik 
Signed-off-by: Heiko Carstens 
Signed-off-by: Sasha Levin

s390/cpcmd: fix inline assembly register clobbering

2021-04-16T10:00:21+00:00

[ Upstream commit 7a2f91441b2c1d81b77c1cd816a4659f4abc9cbe ]

Register variables initialized using arithmetic. That leads to
kasan instrumentaton code corrupting the registers contents.
Follow GCC guidlines and use temporary variables for assigning
init values to register variables.

Fixes: 94c12cc7d196 ("[S390] Inline assembly cleanup.")
Signed-off-by: Alexander Gordeev 
Acked-by: Ilya Leoshkevich 
Link: https://gcc.gnu.org/onlinedocs/gcc-10.2.0/gcc/Local-Register-Variables.html
Signed-off-by: Heiko Carstens 
Signed-off-by: Sasha Levin

s390/smp: __smp_rescan_cpus() - move cpumask away from stack

2021-03-17T15:07:20+00:00

[ Upstream commit 62c8dca9e194326802b43c60763f856d782b225c ]

Avoid a potentially large stack frame and overflow by making
"cpumask_t avail" a static variable. There is no concurrent
access due to the existing locking.

Signed-off-by: Heiko Carstens 
Signed-off-by: Vasily Gorbik 
Signed-off-by: Sasha Levin

s390/cpum_sf.c: fix file permission for cpum_sfb_size

2020-11-24T11:48:13+00:00

commit 78d732e1f326f74f240d416af9484928303d9951 upstream.

This file is installed by the s390 CPU Measurement sampling
facility device driver to export supported minimum and
maximum sample buffer sizes.
This file is read by lscpumf tool to display the details
of the device driver capabilities. The lscpumf tool might
be invoked by a non-root user. In this case it does not
print anything because the file contents can not be read.

Fix this by allowing read access for all users. Reading
the file contents is ok, changing the file contents is
left to the root user only.

For further reference and details see:
 [1] https://github.com/ibm-s390-tools/s390-tools/issues/97

Fixes: 69f239ed335a ("s390/cpum_sf: Dynamically extend the sampling buffer if overflows occur")
Cc:  # 3.14
Signed-off-by: Thomas Richter 
Acked-by: Sumanth Korikkar 
Signed-off-by: Heiko Carstens 
Signed-off-by: Greg Kroah-Hartman

s390/init: add missing __init annotations

2020-10-01T09:11:57+00:00

[ Upstream commit fcb2b70cdb194157678fb1a75f9ff499aeba3d2a ]

Add __init to reserve_memory_end, reserve_oldmem and remove_oldmem.
Sometimes these functions are not inlined, and then the build
complains about section mismatch.

Signed-off-by: Ilya Leoshkevich 
Signed-off-by: Heiko Carstens 
Signed-off-by: Vasily Gorbik 
Signed-off-by: Sasha Levin