linux-stable.git/arch/s390/kernel/syscall.c, branch linux-rolling-stable

s390/syscalls: Add spectre boundary for syscall dispatch table

2026-04-02T11:25:38+00:00

commit 48b8814e25d073dd84daf990a879a820bad2bcbd upstream.

The s390 syscall number is directly controlled by userspace, but does
not have an array_index_nospec() boundary to prevent access past the
syscall function pointer tables.

Cc: Heiko Carstens 
Cc: Vasily Gorbik 
Cc: Alexander Gordeev 
Cc: Christian Borntraeger 
Cc: Sven Schnelle 
Cc: Arnd Bergmann 
Fixes: 56e62a737028 ("s390: convert to generic entry")
Cc: stable@kernel.org
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman 
Reviewed-by: Vasily Gorbik 
Link: https://lore.kernel.org/r/2026032404-sterling-swoosh-43e6@gregkh
Signed-off-by: Vasily Gorbik 
Signed-off-by: Greg Kroah-Hartman

s390/syscalls: Switch to generic system call table generation

2025-11-17T10:10:39+00:00

The s390 syscall.tbl format differs slightly from most others, and
therefore requires an s390 specific system call table generation
script.

With compat support gone use the opportunity to switch to generic
system call table generation. The abi for all 64 bit system calls is
now common, since there is no need to specify if system call entry
points are only for 64 bit anymore.

Furthermore create the system call table in C instead of assembler
code in order to get type checking for all system call functions
contained within the table.

Reviewed-by: Arnd Bergmann 
Signed-off-by: Heiko Carstens

s390/syscalls: Remove system call table pointer from thread_struct

2025-11-17T10:10:39+00:00

With compat support gone there is only one system call table
left. Therefore remove the sys_call_table pointer from
thread_struct and use the sys_call_table directly.

Reviewed-by: Arnd Bergmann 
Signed-off-by: Heiko Carstens

s390: Remove 2k vs 4k page table leftovers

2025-03-18T16:13:05+00:00

Since commit d08d4e7cd6bf ("s390/mm: use full 4KB page for 2KB PTE") always
4k page tables are allocated, however there is still some (now) obsolete
code left which deals with switching from 2k to 4k page tables for qemu/kvm
processes.

Reviewed-by: Alexander Gordeev 
Remove the not needed code.

Signed-off-by: Heiko Carstens 
Signed-off-by: Vasily Gorbik

s390/syscall: Merge __do_syscall() and do_syscall()

2025-03-18T16:13:04+00:00

The compiler inlines do_syscall() into __do_syscall(). Therefore do this in
C code as well, since this makes the code easier to understand.

Also adjust and add various unlikely() and likely() annotations.

Furthermore this allows to replace the separate exit_to_user_mode() and
syscall_exit_to_user_mode_work() calls with a combined
syscall_exit_to_user_mode() call which results in slightly better code.

Acked-by: Vasily Gorbik 
Signed-off-by: Heiko Carstens 
Signed-off-by: Vasily Gorbik

s390/bear: Convert cpu_has_bear() to cpu feature function

2025-03-04T16:18:07+00:00

Get rid of the cpu_has_bear jump label and convert cpu_has_bear() to a cpu
feature function using test_facility() and with that use a static branch.

Reviewed-by: Vasily Gorbik 
Signed-off-by: Heiko Carstens 
Signed-off-by: Vasily Gorbik

Merge tag 's390-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2024-07-18T22:41:45+00:00

Pull s390 updates from Vasily Gorbik:

 - Remove restrictions on PAI NNPA and crypto counters, enabling
   concurrent per-task and system-wide sampling and counting events

 - Switch to GENERIC_CPU_DEVICES by setting up the CPU present mask in
   the architecture code and letting the generic code handle CPU
   bring-up

 - Add support for the diag204 busy indication facility to prevent
   undesirable blocking during hypervisor logical CPU utilization
   queries. Implement results caching

 - Improve the handling of Store Data SCLP events by suppressing
   unnecessary warning, preventing buffer release in I/O during
   failures, and adding timeout handling for Store Data requests to
   address potential firmware issues

 - Provide optimized __arch_hweight*() implementations

 - Remove the unnecessary CPU KOBJ_CHANGE uevents generated during
   topology updates, as they are unused and also not present on other
   architectures

 - Cleanup atomic_ops, optimize __atomic_set() for small values and
   __atomic_cmpxchg_bool() for compilers supporting flag output
   constraint

 - Couple of cleanups for KVM:
     - Move and improve KVM struct definitions for DAT tables from
       gaccess.c to a new header
     - Pass the asce as parameter to sie64a()

 - Make the crdte() and cspg() page table handling wrappers return a
   boolean to indicate success, like the other existing "compare and
   swap" wrappers

 - Add documentation for HWCAP flags

 - Switch to obtaining total RAM pages from memblock instead of
   totalram_pages() during mm init, to ensure correct calculation of
   zero page size, when defer_init is enabled

 - Refactor lowcore access and switch to using the get_lowcore()
   function instead of the S390_lowcore macro

 - Cleanups for PG_arch_1 and folio handling in UV and hugetlb code

 - Add missing MODULE_DESCRIPTION() macros

 - Fix VM_FAULT_HWPOISON handling in do_exception()

* tag 's390-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (54 commits)
  s390/mm: Fix VM_FAULT_HWPOISON handling in do_exception()
  s390/kvm: Move bitfields for dat tables
  s390/entry: Pass the asce as parameter to sie64a()
  s390/sthyi: Use cached data when diag is busy
  s390/sthyi: Move diag operations
  s390/hypfs_diag: Diag204 busy loop
  s390/diag: Add busy-indication-facility requirements
  s390/diag: Diag204 add busy return errno
  s390/diag: Return errno's from diag204
  s390/sclp: Diag204 busy indication facility detection
  s390/atomic_ops: Make use of flag output constraint
  s390/atomic_ops: Improve __atomic_set() for small values
  s390/atomic_ops: Use symbolic names
  s390/smp: Switch to GENERIC_CPU_DEVICES
  s390/hwcaps: Add documentation for HWCAP flags
  s390/pgtable: Make crdte() and cspg() return a value
  s390/topology: Remove CPU KOBJ_CHANGE uevents
  s390/sclp: Add timeout to Store Data requests
  s390/sclp: Prevent release of buffer in I/O
  s390/sclp: Suppress unnecessary Store Data warning
  ...

s390: remove native mmap2() syscall

2024-06-25T13:57:37+00:00

The mmap2() syscall has never been used on 64-bit s390x and should
have been removed as part of 5a79859ae0f3 ("s390: remove 31 bit
support").

Remove it now.

Acked-by: Heiko Carstens 
Signed-off-by: Arnd Bergmann

s390: Replace S390_lowcore by get_lowcore()

2024-06-18T15:01:33+00:00

Replace all S390_lowcore usages in arch/s390/ by get_lowcore().

Acked-by: Heiko Carstens 
Signed-off-by: Sven Schnelle 
Signed-off-by: Vasily Gorbik

s390: add support for BEAR enhancement facility

2021-10-26T13:21:29+00:00

The Breaking-Event-Address-Register (BEAR) stores the address of the
last breaking event instruction. Breaking events are usually instructions
that change the program flow - for example branches, and instructions
that modify the address in the PSW like lpswe. This is useful for debugging
wild branches, because one could easily figure out where the wild branch
was originating from.

What is problematic is that lpswe is considered a breaking event, and
therefore overwrites BEAR on kernel exit. The BEAR enhancement facility
adds new instructions that allow to save/restore BEAR and also an lpswey
instruction that doesn't cause a breaking event. So we can save BEAR on
kernel entry and restore it on exit to user space.

Signed-off-by: Sven Schnelle 
Reviewed-by: Heiko Carstens 
Signed-off-by: Vasily Gorbik