linux-stable.git/arch/s390/kernel/setup.c, branch linux-5.4.y Linux kernel stable tree s390/archrandom: simplify back to earlier design and initialize earlier 2022-07-07T15:36:48+00:00 Jason A. Donenfeld Jason@zx2c4.com 2022-06-10T22:20:23+00:00 13816057eaf2e9c7d203ee610d48d0f2b05f6540 commit e4f74400308cb8abde5fdc9cad609c2aba32110c upstream. s390x appears to present two RNG interfaces: - a "TRNG" that gathers entropy using some hardware function; and - a "DRBG" that takes in a seed and expands it. Previously, the TRNG was wired up to arch_get_random_{long,int}(), but it was observed that this was being called really frequently, resulting in high overhead. So it was changed to be wired up to arch_get_random_ seed_{long,int}(), which was a reasonable decision. Later on, the DRBG was then wired up to arch_get_random_{long,int}(), with a complicated buffer filling thread, to control overhead and rate. Fortunately, none of the performance issues matter much now. The RNG always attempts to use arch_get_random_seed_{long,int}() first, which means a complicated implementation of arch_get_random_{long,int}() isn't really valuable or useful to have around. And it's only used when reseeding, which means it won't hit the high throughput complications that were faced before. So this commit returns to an earlier design of just calling the TRNG in arch_get_random_seed_{long,int}(), and returning false in arch_get_ random_{long,int}(). Part of what makes the simplification possible is that the RNG now seeds itself using the TRNG at bootup. But this only works if the TRNG is detected early in boot, before random_init() is called. So this commit also causes that check to happen in setup_arch(). Cc: stable@vger.kernel.org Cc: Harald Freudenberger <freude@linux.ibm.com> Cc: Ingo Franzki <ifranzki@linux.ibm.com> Cc: Juergen Christ <jchrist@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20220610222023.378448-1-Jason@zx2c4.com Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e4f74400308cb8abde5fdc9cad609c2aba32110c upstream.

s390x appears to present two RNG interfaces:
- a "TRNG" that gathers entropy using some hardware function; and
- a "DRBG" that takes in a seed and expands it.

Previously, the TRNG was wired up to arch_get_random_{long,int}(), but
it was observed that this was being called really frequently, resulting
in high overhead. So it was changed to be wired up to arch_get_random_
seed_{long,int}(), which was a reasonable decision. Later on, the DRBG
was then wired up to arch_get_random_{long,int}(), with a complicated
buffer filling thread, to control overhead and rate.

Fortunately, none of the performance issues matter much now. The RNG
always attempts to use arch_get_random_seed_{long,int}() first, which
means a complicated implementation of arch_get_random_{long,int}() isn't
really valuable or useful to have around. And it's only used when
reseeding, which means it won't hit the high throughput complications
that were faced before.

So this commit returns to an earlier design of just calling the TRNG in
arch_get_random_seed_{long,int}(), and returning false in arch_get_
random_{long,int}().

Part of what makes the simplification possible is that the RNG now seeds
itself using the TRNG at bootup. But this only works if the TRNG is
detected early in boot, before random_init() is called. So this commit
also causes that check to happen in setup_arch().

Cc: stable@vger.kernel.org
Cc: Harald Freudenberger <freude@linux.ibm.com>
Cc: Ingo Franzki <ifranzki@linux.ibm.com>
Cc: Juergen Christ <jchrist@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20220610222023.378448-1-Jason@zx2c4.com
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
s390/setup: avoid using memblock_enforce_memory_limit 2021-12-08T08:01:09+00:00 Vasily Gorbik gor@linux.ibm.com 2021-10-14T11:38:17+00:00 5db28ea9f1a4a8dff614e93dddfa8f2bbc26e00d [ Upstream commit 5dbc4cb4667457b0c53bcd7bff11500b3c362975 ] There is a difference in how architectures treat "mem=" option. For some that is an amount of online memory, for s390 and x86 this is the limiting max address. Some memblock api like memblock_enforce_memory_limit() take limit argument and explicitly treat it as the size of online memory, and use __find_max_addr to convert it to an actual max address. Current s390 usage: memblock_enforce_memory_limit(memblock_end_of_DRAM()); yields different results depending on presence of memory holes (offline memory blocks in between online memory). If there are no memory holes limit == max_addr in memblock_enforce_memory_limit() and it does trim online memory and reserved memory regions. With memory holes present it actually does nothing. Since we already use memblock_remove() explicitly to trim online memory regions to potential limit (think mem=, kdump, addressing limits, etc.) drop the usage of memblock_enforce_memory_limit() altogether. Trimming reserved regions should not be required, since we now use memblock_set_current_limit() to limit allocations and any explicit memory reservations above the limit is an actual problem we should not hide. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 5dbc4cb4667457b0c53bcd7bff11500b3c362975 ]

There is a difference in how architectures treat "mem=" option. For some
that is an amount of online memory, for s390 and x86 this is the limiting
max address. Some memblock api like memblock_enforce_memory_limit()
take limit argument and explicitly treat it as the size of online memory,
and use __find_max_addr to convert it to an actual max address. Current
s390 usage:

memblock_enforce_memory_limit(memblock_end_of_DRAM());

yields different results depending on presence of memory holes (offline
memory blocks in between online memory). If there are no memory holes
limit == max_addr in memblock_enforce_memory_limit() and it does trim
online memory and reserved memory regions. With memory holes present it
actually does nothing.

Since we already use memblock_remove() explicitly to trim online memory
regions to potential limit (think mem=, kdump, addressing limits, etc.)
drop the usage of memblock_enforce_memory_limit() altogether. Trimming
reserved regions should not be required, since we now use
memblock_set_current_limit() to limit allocations and any explicit memory
reservations above the limit is an actual problem we should not hide.

Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
s390/sclp_vt220: fix console name to match device 2021-07-20T14:10:43+00:00 Valentin Vidic vvidic@valentin-vidic.from.hr 2021-04-27T19:40:10+00:00 f0bca3fbf16b99b42cb0c6a787221e3c345c534f [ Upstream commit b7d91d230a119fdcc334d10c9889ce9c5e15118b ] Console name reported in /proc/consoles: ttyS1 -W- (EC p ) 4:65 does not match the char device name: crw--w---- 1 root root 4, 65 May 17 12:18 /dev/ttysclp0 so debian-installer inside a QEMU s390x instance gets confused and fails to start with the following error: steal-ctty: No such file or directory Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr> Link: https://lore.kernel.org/r/20210427194010.9330-1-vvidic@valentin-vidic.from.hr Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b7d91d230a119fdcc334d10c9889ce9c5e15118b ]

Console name reported in /proc/consoles:

  ttyS1                -W- (EC p  )    4:65

does not match the char device name:

  crw--w----    1 root     root        4,  65 May 17 12:18 /dev/ttysclp0

so debian-installer inside a QEMU s390x instance gets confused and fails
to start with the following error:

  steal-ctty: No such file or directory

Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr>
Link: https://lore.kernel.org/r/20210427194010.9330-1-vvidic@valentin-vidic.from.hr
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
s390: fix detection of vector enhancements facility 1 vs. vector packed decimal facility 2021-05-14T07:44:15+00:00 David Hildenbrand david@redhat.com 2021-05-03T12:12:44+00:00 45a3ae26fcd9454cdad646e2e42cc3ca432b3300 commit b208108638c4bd3215792415944467c36f5dfd97 upstream. The PoP documents: 134: The vector packed decimal facility is installed in the z/Architecture architectural mode. When bit 134 is one, bit 129 is also one. 135: The vector enhancements facility 1 is installed in the z/Architecture architectural mode. When bit 135 is one, bit 129 is also one. Looks like we confuse the vector enhancements facility 1 ("EXT") with the Vector packed decimal facility ("BCD"). Let's fix the facility checks. Detected while working on QEMU/tcg z14 support and only unlocking the vector enhancements facility 1, but not the vector packed decimal facility. Fixes: 2583b848cad0 ("s390: report new vector facilities") Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Link: https://lore.kernel.org/r/20210503121244.25232-1-david@redhat.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b208108638c4bd3215792415944467c36f5dfd97 upstream.

The PoP documents:
	134: The vector packed decimal facility is installed in the
	     z/Architecture architectural mode. When bit 134 is
	     one, bit 129 is also one.
	135: The vector enhancements facility 1 is installed in
	     the z/Architecture architectural mode. When bit 135
	     is one, bit 129 is also one.

Looks like we confuse the vector enhancements facility 1 ("EXT") with the
Vector packed decimal facility ("BCD"). Let's fix the facility checks.

Detected while working on QEMU/tcg z14 support and only unlocking
the vector enhancements facility 1, but not the vector packed decimal
facility.

Fixes: 2583b848cad0 ("s390: report new vector facilities")
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20210503121244.25232-1-david@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
s390/init: add missing __init annotations 2020-10-01T11:18:14+00:00 Ilya Leoshkevich iii@linux.ibm.com 2020-09-09T12:27:25+00:00 43d750a0994ca8edb9f7695c779901592339482c [ Upstream commit fcb2b70cdb194157678fb1a75f9ff499aeba3d2a ] Add __init to reserve_memory_end, reserve_oldmem and remove_oldmem. Sometimes these functions are not inlined, and then the build complains about section mismatch. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit fcb2b70cdb194157678fb1a75f9ff499aeba3d2a ]

Add __init to reserve_memory_end, reserve_oldmem and remove_oldmem.
Sometimes these functions are not inlined, and then the build
complains about section mismatch.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
s390: avoid misusing CALL_ON_STACK for task stack setup 2020-10-01T11:17:22+00:00 Vasily Gorbik gor@linux.ibm.com 2019-11-22T12:12:57+00:00 a04223019c2219e9a55377bee587f45c18c40dad [ Upstream commit 7bcaad1f9fac889f5fcd1a383acf7e00d006da41 ] CALL_ON_STACK is intended to be used for temporary stack switching with potential return to the caller. When CALL_ON_STACK is misused to switch from nodat stack to task stack back_chain information would later lead stack unwinder from task stack into (per cpu) nodat stack which is reused for other purposes. This would yield confusing unwinding result or errors. To avoid that introduce CALL_ON_STACK_NORETURN to be used instead. It makes sure that back_chain is zeroed and unwinder finishes gracefully ending up at task pt_regs. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7bcaad1f9fac889f5fcd1a383acf7e00d006da41 ]

CALL_ON_STACK is intended to be used for temporary stack switching with
potential return to the caller.

When CALL_ON_STACK is misused to switch from nodat stack to task stack
back_chain information would later lead stack unwinder from task stack into
(per cpu) nodat stack which is reused for other purposes. This would
yield confusing unwinding result or errors.

To avoid that introduce CALL_ON_STACK_NORETURN to be used instead. It
makes sure that back_chain is zeroed and unwinder finishes gracefully
ending up at task pt_regs.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
s390/setup: init jump labels before command line parsing 2020-07-16T06:16:46+00:00 Vasily Gorbik gor@linux.ibm.com 2020-06-18T15:17:19+00:00 0d62bc7e960f5b86ad8b57f9d39b3ea5fc8e4ad2 commit 95e61b1b5d6394b53d147c0fcbe2ae70fbe09446 upstream. Command line parameters might set static keys. This is true for s390 at least since commit 6471384af2a6 ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options"). To avoid the following WARN: static_key_enable_cpuslocked(): static key 'init_on_alloc+0x0/0x40' used before call to jump_label_init() call jump_label_init() just before parse_early_param(). jump_label_init() is safe to call multiple times (x86 does that), doesn't do any memory allocations and hence should be safe to call that early. Fixes: 6471384af2a6 ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options") Cc: <stable@vger.kernel.org> # 5.3: d6df52e9996d: s390/maccess: add no DAT mode to kernel_write Cc: <stable@vger.kernel.org> # 5.3 Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 95e61b1b5d6394b53d147c0fcbe2ae70fbe09446 upstream.

Command line parameters might set static keys. This is true for s390 at
least since commit 6471384af2a6 ("mm: security: introduce init_on_alloc=1
and init_on_free=1 boot options"). To avoid the following WARN:

static_key_enable_cpuslocked(): static key 'init_on_alloc+0x0/0x40' used
before call to jump_label_init()

call jump_label_init() just before parse_early_param().
jump_label_init() is safe to call multiple times (x86 does that), doesn't
do any memory allocations and hence should be safe to call that early.

Fixes: 6471384af2a6 ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options")
Cc: <stable@vger.kernel.org> # 5.3: d6df52e9996d: s390/maccess: add no DAT mode to kernel_write
Cc: <stable@vger.kernel.org> # 5.3
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
s390: prevent leaking kernel address in BEAR 2020-04-13T08:48:06+00:00 Sven Schnelle svens@linux.ibm.com 2020-01-22T12:38:22+00:00 5e331978200e379c525394aa0863cece328c3dee commit 0b38b5e1d0e2f361e418e05c179db05bb688bbd6 upstream. When userspace executes a syscall or gets interrupted, BEAR contains a kernel address when returning to userspace. This make it pretty easy to figure out where the kernel is mapped even with KASLR enabled. To fix this, add lpswe to lowcore and always execute it there, so userspace sees only the lowcore address of lpswe. For this we have to extend both critical_cleanup and the SWITCH_ASYNC macro to also check for lpswe addresses in lowcore. Fixes: b2d24b97b2a9 ("s390/kernel: add support for kernel address space layout randomization (KASLR)") Cc: <stable@vger.kernel.org> # v5.2+ Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0b38b5e1d0e2f361e418e05c179db05bb688bbd6 upstream.

When userspace executes a syscall or gets interrupted,
BEAR contains a kernel address when returning to userspace.
This make it pretty easy to figure out where the kernel is
mapped even with KASLR enabled. To fix this, add lpswe to
lowcore and always execute it there, so userspace sees only
the lowcore address of lpswe. For this we have to extend
both critical_cleanup and the SWITCH_ASYNC macro to also check
for lpswe addresses in lowcore.

Fixes: b2d24b97b2a9 ("s390/kernel: add support for kernel address space layout randomization (KASLR)")
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
s390/setup: Fix secure ipl message 2020-01-23T07:22:38+00:00 Philipp Rudo prudo@linux.ibm.com 2019-12-18T10:24:43+00:00 c68777df519635bb1d4053253bc6832ede17f3e6 commit 40260b01d029ba374637838213af500e03305326 upstream. The new machine loader on z15 always creates an IPL Report block and thus sets the IPL_PL_FLAG_IPLSR even when secure boot is disabled. This causes the wrong message being printed at boot. Fix this by checking for IPL_PL_FLAG_SIPL instead. Fixes: 9641b8cc733f ("s390/ipl: read IPL report at early boot") Signed-off-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 40260b01d029ba374637838213af500e03305326 upstream.

The new machine loader on z15 always creates an IPL Report block and
thus sets the IPL_PL_FLAG_IPLSR even when secure boot is disabled. This
causes the wrong message being printed at boot. Fix this by checking for
IPL_PL_FLAG_SIPL instead.

Fixes: 9641b8cc733f ("s390/ipl: read IPL report at early boot")
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 's390-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux 2019-09-17T21:04:43+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-09-17T21:04:43+00:00 d590284419b1d7cc2dc646e9bdde4da19061cf0f Pull s390 updates from Vasily Gorbik: - Add support for IBM z15 machines. - Add SHA3 and CCA AES cipher key support in zcrypt and pkey refactoring. - Move to arch_stack_walk infrastructure for the stack unwinder. - Various kasan fixes and improvements. - Various command line parsing fixes. - Improve decompressor phase debuggability. - Lift no bss usage restriction for the early code. - Use refcount_t for reference counters for couple of places in mm code. - Logging improvements and return code fix in vfio-ccw code. - Couple of zpci fixes and minor refactoring. - Remove some outdated documentation. - Fix secure boot detection. - Other various minor code clean ups. * tag 's390-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits) s390: remove pointless drivers-y in drivers/s390/Makefile s390/cpum_sf: Fix line length and format string s390/pci: fix MSI message data s390: add support for IBM z15 machines s390/crypto: Support for SHA3 via CPACF (MSA6) s390/startup: add pgm check info printing s390/crypto: xts-aes-s390 fix extra run-time crypto self tests finding vfio-ccw: fix error return code in vfio_ccw_sch_init() s390: vfio-ap: fix warning reset not completed s390/base: remove unused s390_base_mcck_handler s390/sclp: Fix bit checked for has_sipl s390/zcrypt: fix wrong handling of cca cipher keygenflags s390/kasan: add kdump support s390/setup: avoid using strncmp with hardcoded length s390/sclp: avoid using strncmp with hardcoded length s390/module: avoid using strncmp with hardcoded length s390/pci: avoid using strncmp with hardcoded length s390/kaslr: reserve memory for kasan usage s390/mem_detect: provide single get_mem_detect_end s390/cmma: reuse kstrtobool for option value parsing ... 
Pull s390 updates from Vasily Gorbik:

 - Add support for IBM z15 machines.

 - Add SHA3 and CCA AES cipher key support in zcrypt and pkey
   refactoring.

 - Move to arch_stack_walk infrastructure for the stack unwinder.

 - Various kasan fixes and improvements.

 - Various command line parsing fixes.

 - Improve decompressor phase debuggability.

 - Lift no bss usage restriction for the early code.

 - Use refcount_t for reference counters for couple of places in mm
   code.

 - Logging improvements and return code fix in vfio-ccw code.

 - Couple of zpci fixes and minor refactoring.

 - Remove some outdated documentation.

 - Fix secure boot detection.

 - Other various minor code clean ups.

* tag 's390-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits)
  s390: remove pointless drivers-y in drivers/s390/Makefile
  s390/cpum_sf: Fix line length and format string
  s390/pci: fix MSI message data
  s390: add support for IBM z15 machines
  s390/crypto: Support for SHA3 via CPACF (MSA6)
  s390/startup: add pgm check info printing
  s390/crypto: xts-aes-s390 fix extra run-time crypto self tests finding
  vfio-ccw: fix error return code in vfio_ccw_sch_init()
  s390: vfio-ap: fix warning reset not completed
  s390/base: remove unused s390_base_mcck_handler
  s390/sclp: Fix bit checked for has_sipl
  s390/zcrypt: fix wrong handling of cca cipher keygenflags
  s390/kasan: add kdump support
  s390/setup: avoid using strncmp with hardcoded length
  s390/sclp: avoid using strncmp with hardcoded length
  s390/module: avoid using strncmp with hardcoded length
  s390/pci: avoid using strncmp with hardcoded length
  s390/kaslr: reserve memory for kasan usage
  s390/mem_detect: provide single get_mem_detect_end
  s390/cmma: reuse kstrtobool for option value parsing
  ...