linux-stable.git/arch/s390/include/asm/setup.h, branch linux-5.4.y

s390: make PCI mio support a machine flag

2021-09-22T10:26:29+00:00

[ Upstream commit 3322ba0d7bea1e24ae464418626f6a15b69533ab ]

Kernel support for the newer PCI mio instructions can be toggled off
with the pci=nomio command line option which needs to integrate with
common code PCI option parsing. However this option then toggles static
branches which can't be toggled yet in an early_param() call.

Thus commit 9964f396f1d0 ("s390: fix setting of mio addressing control")
moved toggling the static branches to the PCI init routine.

With this setup however we can't check for mio support outside the PCI
code during early boot, i.e. before switching the static branches, which
we need to be able to export this as an ELF HWCAP.

Improve on this by turning mio availability into a machine flag that
gets initially set based on CONFIG_PCI and the facility bit and gets
toggled off if pci=nomio is found during PCI option parsing allowing
simple access to this machine flag after early init.

Reviewed-by: Heiko Carstens 
Signed-off-by: Niklas Schnelle 
Signed-off-by: Heiko Carstens 
Signed-off-by: Sasha Levin

s390: prevent leaking kernel address in BEAR

2020-04-13T08:48:06+00:00

commit 0b38b5e1d0e2f361e418e05c179db05bb688bbd6 upstream.

When userspace executes a syscall or gets interrupted,
BEAR contains a kernel address when returning to userspace.
This make it pretty easy to figure out where the kernel is
mapped even with KASLR enabled. To fix this, add lpswe to
lowcore and always execute it there, so userspace sees only
the lowcore address of lpswe. For this we have to extend
both critical_cleanup and the SWITCH_ASYNC macro to also check
for lpswe addresses in lowcore.

Fixes: b2d24b97b2a9 ("s390/kernel: add support for kernel address space layout randomization (KASLR)")
Cc:  # v5.2+
Reviewed-by: Gerald Schaefer 
Signed-off-by: Sven Schnelle 
Signed-off-by: Vasily Gorbik 
Signed-off-by: Greg Kroah-Hartman

Merge tag 's390-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2019-09-17T21:04:43+00:00

Pull s390 updates from Vasily Gorbik:

 - Add support for IBM z15 machines.

 - Add SHA3 and CCA AES cipher key support in zcrypt and pkey
   refactoring.

 - Move to arch_stack_walk infrastructure for the stack unwinder.

 - Various kasan fixes and improvements.

 - Various command line parsing fixes.

 - Improve decompressor phase debuggability.

 - Lift no bss usage restriction for the early code.

 - Use refcount_t for reference counters for couple of places in mm
   code.

 - Logging improvements and return code fix in vfio-ccw code.

 - Couple of zpci fixes and minor refactoring.

 - Remove some outdated documentation.

 - Fix secure boot detection.

 - Other various minor code clean ups.

* tag 's390-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits)
  s390: remove pointless drivers-y in drivers/s390/Makefile
  s390/cpum_sf: Fix line length and format string
  s390/pci: fix MSI message data
  s390: add support for IBM z15 machines
  s390/crypto: Support for SHA3 via CPACF (MSA6)
  s390/startup: add pgm check info printing
  s390/crypto: xts-aes-s390 fix extra run-time crypto self tests finding
  vfio-ccw: fix error return code in vfio_ccw_sch_init()
  s390: vfio-ap: fix warning reset not completed
  s390/base: remove unused s390_base_mcck_handler
  s390/sclp: Fix bit checked for has_sipl
  s390/zcrypt: fix wrong handling of cca cipher keygenflags
  s390/kasan: add kdump support
  s390/setup: avoid using strncmp with hardcoded length
  s390/sclp: avoid using strncmp with hardcoded length
  s390/module: avoid using strncmp with hardcoded length
  s390/pci: avoid using strncmp with hardcoded length
  s390/kaslr: reserve memory for kasan usage
  s390/mem_detect: provide single get_mem_detect_end
  s390/cmma: reuse kstrtobool for option value parsing
  ...

s390: move vmalloc option parsing to startup code

2019-08-21T10:41:43+00:00

Few other crucial memory setup options are already handled in
the startup code. Those values are needed by kaslr and kasan
implementations. "vmalloc" is the last piece required for future
improvements such as early decision on kernel page levels depth required
for actual memory setup, as well as vmalloc memory area access monitoring
in kasan.

Reviewed-by: Heiko Carstens 
Signed-off-by: Vasily Gorbik

s390/boot: add missing declarations and includes

2019-07-29T16:05:02+00:00

Add __swsusp_reset_dma declaration to avoid the following sparse warnings:
arch/s390/kernel/setup.c:107:15: warning: symbol '__swsusp_reset_dma' was not declared. Should it be static?
arch/s390/boot/startup.c:52:15: warning: symbol '__swsusp_reset_dma' was not declared. Should it be static?

Add verify_facilities declaration to avoid the following sparse warning:
arch/s390/boot/als.c:105:6: warning: symbol 'verify_facilities' was not declared. Should it be static?

Include "boot.h" into arch/s390/boot/kaslr.c to expose get_random_base
function declaration and avoid the following sparse warning:
arch/s390/boot/kaslr.c:90:15: warning: symbol 'get_random_base' was not declared. Should it be static?

Signed-off-by: Vasily Gorbik

s390: enable detection of kernel version from bzImage

2019-07-23T08:43:50+00:00

Extend "parmarea" to include an offset of the version string, which is
stored as 8-byte big endian value.

To retrieve version string from bzImage reliably, one should check the
presence of "S390EP" ascii string at 0x10008 (available since v3.2),
then read the version string offset from 0x10428 (which has been 0
since v3.2 up to now). The string is null terminated.

Could be retrieved with the following "file" command magic (requires
file v5.34):
8 string \x02\x00\x00\x18\x60\x00\x00\x50\x02\x00\x00\x68\x60\x00\x00\x50\x40\x40\x40\x40\x40\x40\x40\x40 Linux S390
>0x10008       string          S390EP
>>0x10428      bequad          >0
>>>(0x10428.Q) string          >\0             \b, version %s

Reported-by: Petr Tesarik 
Suggested-by: Petr Tesarik 
Reviewed-by: Heiko Carstens 
Signed-off-by: Vasily Gorbik 
Signed-off-by: Heiko Carstens

arch: replace _BITUL() in kernel-space headers with BIT()

2019-07-17T02:23:22+00:00

Now that BIT() can be used from assembly code, we can safely replace
_BITUL() with equivalent BIT().

UAPI headers are still required to use _BITUL(), but there is no more
reason to use it in kernel headers.  BIT() is shorter.

Link: http://lkml.kernel.org/r/20190609153941.17249-2-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada 
Cc: Heiko Carstens 
Cc: Vasily Gorbik 
Cc: Christian Borntraeger 
Cc: Vineet Gupta 
Cc: Catalin Marinas 
Cc: Will Deacon 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

s390/kernel: add support for kernel address space layout randomization (KASLR)

2019-04-29T08:47:10+00:00

This patch adds support for relocating the kernel to a random address.
The random kernel offset is obtained from cpacf, using either TRNG, PRNO,
or KMC_PRNG, depending on supported MSA level.

KERNELOFFSET is added to vmcoreinfo, for crash --kaslr support.

Signed-off-by: Gerald Schaefer 
Reviewed-by: Philipp Rudo 
Signed-off-by: Martin Schwidefsky

s390/sclp: do not use static sccbs

2019-04-29T08:47:10+00:00

The sccbs for init/read/sdias/early have to be located below 2 GB, and
they are currently defined as a static buffer.

With a relocatable kernel that could reside at any place in memory, this
will no longer guarantee the location below 2 GB, so use a dynamic
GFP_DMA allocation instead.

The sclp_early_sccb buffer needs special handling, as it can be used
very early, and by both the decompressor and also the decompressed
kernel. Therefore, a fixed 4 KB buffer is introduced at 0x11000, the
former PARMAREA_END. The new PARMAREA_END is now 0x12000, and it is
renamed to HEAD_END, as it is rather the end of head.S and not the end
of the parmarea.

Signed-off-by: Gerald Schaefer 
Reviewed-by: Philipp Rudo 
Signed-off-by: Martin Schwidefsky

s390/kexec_file: Simplify parmarea access

2019-04-29T08:43:57+00:00

Access the parmarea in head.S via a struct instead of individual offsets.

While at it make the fields in the parmarea .quads.

Signed-off-by: Philipp Rudo 
Signed-off-by: Martin Schwidefsky