linux-stable.git/arch/powerpc, branch v5.4.73 Linux kernel stable tree powerpc/pseries: Avoid using addr_to_pfn in real mode 2020-10-29T08:58:00+00:00 Ganesh Goudar ganeshgr@linux.ibm.com 2020-07-24T06:39:46+00:00 5ef1279abc74ede5a7b77e0d3c8ba149d9bde3d1 [ Upstream commit 4ff753feab021242144818b9a3ba011238218145 ] When an UE or memory error exception is encountered the MCE handler tries to find the pfn using addr_to_pfn() which takes effective address as an argument, later pfn is used to poison the page where memory error occurred, recent rework in this area made addr_to_pfn to run in real mode, which can be fatal as it may try to access memory outside RMO region. Have two helper functions to separate things to be done in real mode and virtual mode without changing any functionality. This also fixes the following error as the use of addr_to_pfn is now moved to virtual mode. Without this change following kernel crash is seen on hitting UE. [ 485.128036] Oops: Kernel access of bad area, sig: 11 [#1] [ 485.128040] LE SMP NR_CPUS=2048 NUMA pSeries [ 485.128047] Modules linked in: [ 485.128067] CPU: 15 PID: 6536 Comm: insmod Kdump: loaded Tainted: G OE 5.7.0 #22 [ 485.128074] NIP: c00000000009b24c LR: c0000000000398d8 CTR: c000000000cd57c0 [ 485.128078] REGS: c000000003f1f970 TRAP: 0300 Tainted: G OE (5.7.0) [ 485.128082] MSR: 8000000000001003 <SF,ME,RI,LE> CR: 28008284 XER: 00000001 [ 485.128088] CFAR: c00000000009b190 DAR: c0000001fab00000 DSISR: 40000000 IRQMASK: 1 [ 485.128088] GPR00: 0000000000000001 c000000003f1fbf0 c000000001634300 0000b0fa01000000 [ 485.128088] GPR04: d000000002220000 0000000000000000 00000000fab00000 0000000000000022 [ 485.128088] GPR08: c0000001fab00000 0000000000000000 c0000001fab00000 c000000003f1fc14 [ 485.128088] GPR12: 0000000000000008 c000000003ff5880 d000000002100008 0000000000000000 [ 485.128088] GPR16: 000000000000ff20 000000000000fff1 000000000000fff2 d0000000021a1100 [ 485.128088] GPR20: d000000002200000 c00000015c893c50 c000000000d49b28 c00000015c893c50 [ 485.128088] GPR24: d0000000021a0d08 c0000000014e5da8 d0000000021a0818 000000000000000a [ 485.128088] GPR28: 0000000000000008 000000000000000a c0000000017e2970 000000000000000a [ 485.128125] NIP [c00000000009b24c] __find_linux_pte+0x11c/0x310 [ 485.128130] LR [c0000000000398d8] addr_to_pfn+0x138/0x170 [ 485.128133] Call Trace: [ 485.128135] Instruction dump: [ 485.128138] 3929ffff 7d4a3378 7c883c36 7d2907b4 794a1564 7d294038 794af082 3900ffff [ 485.128144] 79291f24 790af00e 78e70020 7d095214 <7c69502a> 2fa30000 419e011c 70690040 [ 485.128152] ---[ end trace d34b27e29ae0e340 ]--- Fixes: 9ca766f9891d ("powerpc/64s/pseries: machine check convert to use common event code") Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200724063946.21378-1-ganeshgr@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 4ff753feab021242144818b9a3ba011238218145 ]

When an UE or memory error exception is encountered the MCE handler
tries to find the pfn using addr_to_pfn() which takes effective
address as an argument, later pfn is used to poison the page where
memory error occurred, recent rework in this area made addr_to_pfn
to run in real mode, which can be fatal as it may try to access
memory outside RMO region.

Have two helper functions to separate things to be done in real mode
and virtual mode without changing any functionality. This also fixes
the following error as the use of addr_to_pfn is now moved to virtual
mode.

Without this change following kernel crash is seen on hitting UE.

[  485.128036] Oops: Kernel access of bad area, sig: 11 [#1]
[  485.128040] LE SMP NR_CPUS=2048 NUMA pSeries
[  485.128047] Modules linked in:
[  485.128067] CPU: 15 PID: 6536 Comm: insmod Kdump: loaded Tainted: G OE 5.7.0 #22
[  485.128074] NIP:  c00000000009b24c LR: c0000000000398d8 CTR: c000000000cd57c0
[  485.128078] REGS: c000000003f1f970 TRAP: 0300   Tainted: G OE (5.7.0)
[  485.128082] MSR:  8000000000001003 <SF,ME,RI,LE>  CR: 28008284  XER: 00000001
[  485.128088] CFAR: c00000000009b190 DAR: c0000001fab00000 DSISR: 40000000 IRQMASK: 1
[  485.128088] GPR00: 0000000000000001 c000000003f1fbf0 c000000001634300 0000b0fa01000000
[  485.128088] GPR04: d000000002220000 0000000000000000 00000000fab00000 0000000000000022
[  485.128088] GPR08: c0000001fab00000 0000000000000000 c0000001fab00000 c000000003f1fc14
[  485.128088] GPR12: 0000000000000008 c000000003ff5880 d000000002100008 0000000000000000
[  485.128088] GPR16: 000000000000ff20 000000000000fff1 000000000000fff2 d0000000021a1100
[  485.128088] GPR20: d000000002200000 c00000015c893c50 c000000000d49b28 c00000015c893c50
[  485.128088] GPR24: d0000000021a0d08 c0000000014e5da8 d0000000021a0818 000000000000000a
[  485.128088] GPR28: 0000000000000008 000000000000000a c0000000017e2970 000000000000000a
[  485.128125] NIP [c00000000009b24c] __find_linux_pte+0x11c/0x310
[  485.128130] LR [c0000000000398d8] addr_to_pfn+0x138/0x170
[  485.128133] Call Trace:
[  485.128135] Instruction dump:
[  485.128138] 3929ffff 7d4a3378 7c883c36 7d2907b4 794a1564 7d294038 794af082 3900ffff
[  485.128144] 79291f24 790af00e 78e70020 7d095214 <7c69502a> 2fa30000 419e011c 70690040
[  485.128152] ---[ end trace d34b27e29ae0e340 ]---

Fixes: 9ca766f9891d ("powerpc/64s/pseries: machine check convert to use common event code")
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724063946.21378-1-ganeshgr@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/powernv/dump: Fix race while processing OPAL dump 2020-10-29T08:58:00+00:00 Vasant Hegde hegdevasant@linux.vnet.ibm.com 2020-10-17T16:42:10+00:00 72ccbd1481cbea167cbfc53920e82bccc5b88cdf [ Upstream commit 0a43ae3e2beb77e3481d812834d33abe270768ab ] Every dump reported by OPAL is exported to userspace through a sysfs interface and notified using kobject_uevent(). The userspace daemon (opal_errd) then reads the dump and acknowledges that the dump is saved safely to disk. Once acknowledged the kernel removes the respective sysfs file entry causing respective resources to be released including kobject. However it's possible the userspace daemon may already be scanning dump entries when a new sysfs dump entry is created by the kernel. User daemon may read this new entry and ack it even before kernel can notify userspace about it through kobject_uevent() call. If that happens then we have a potential race between dump_ack_store->kobject_put() and kobject_uevent which can lead to use-after-free of a kernfs object resulting in a kernel crash. This patch fixes this race by protecting the sysfs file creation/notification by holding a reference count on kobject until we safely send kobject_uevent(). The function create_dump_obj() returns the dump object which if used by caller function will end up in use-after-free problem again. However, the return value of create_dump_obj() function isn't being used today and there is no need as well. Hence change it to return void to make this fix complete. Fixes: c7e64b9ce04a ("powerpc/powernv Platform dump interface") Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201017164210.264619-1-hegdevasant@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0a43ae3e2beb77e3481d812834d33abe270768ab ]

Every dump reported by OPAL is exported to userspace through a sysfs
interface and notified using kobject_uevent(). The userspace daemon
(opal_errd) then reads the dump and acknowledges that the dump is
saved safely to disk. Once acknowledged the kernel removes the
respective sysfs file entry causing respective resources to be
released including kobject.

However it's possible the userspace daemon may already be scanning
dump entries when a new sysfs dump entry is created by the kernel.
User daemon may read this new entry and ack it even before kernel can
notify userspace about it through kobject_uevent() call. If that
happens then we have a potential race between
dump_ack_store->kobject_put() and kobject_uevent which can lead to
use-after-free of a kernfs object resulting in a kernel crash.

This patch fixes this race by protecting the sysfs file
creation/notification by holding a reference count on kobject until we
safely send kobject_uevent().

The function create_dump_obj() returns the dump object which if used
by caller function will end up in use-after-free problem again.
However, the return value of create_dump_obj() function isn't being
used today and there is no need as well. Hence change it to return
void to make this fix complete.

Fixes: c7e64b9ce04a ("powerpc/powernv Platform dump interface")
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201017164210.264619-1-hegdevasant@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/perf/hv-gpci: Fix starting index value 2020-10-29T08:57:51+00:00 Kajol Jain kjain@linux.ibm.com 2020-10-03T07:49:39+00:00 ebe1a014d7ed81f80e5224cb6c1539bf8faccb2c [ Upstream commit 0f9866f7e85765bbda86666df56c92f377c3bc10 ] Commit 9e9f60108423f ("powerpc/perf/{hv-gpci, hv-common}: generate requests with counters annotated") adds a framework for defining gpci counters. In this patch, they adds starting_index value as '0xffffffffffffffff'. which is wrong as starting_index is of size 32 bits. Because of this, incase we try to run hv-gpci event we get error. In power9 machine: command#: perf stat -e hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/ -C 0 -I 1000 event syntax error: '..bie_count_and_time_tlbie_instructions_issued/' \___ value too big for format, maximum is 4294967295 This patch fix this issue and changes starting_index value to '0xffffffff' After this patch: command#: perf stat -e hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/ -C 0 -I 1000 1.000085786 1,024 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/ 2.000287818 1,024 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/ 2.439113909 17,408 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/ Fixes: 9e9f60108423 ("powerpc/perf/{hv-gpci, hv-common}: generate requests with counters annotated") Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201003074943.338618-1-kjain@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0f9866f7e85765bbda86666df56c92f377c3bc10 ]

Commit 9e9f60108423f ("powerpc/perf/{hv-gpci, hv-common}: generate
requests with counters annotated") adds a framework for defining
gpci counters.
In this patch, they adds starting_index value as '0xffffffffffffffff'.
which is wrong as starting_index is of size 32 bits.

Because of this, incase we try to run hv-gpci event we get error.

In power9 machine:

command#: perf stat -e hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
          -C 0 -I 1000
event syntax error: '..bie_count_and_time_tlbie_instructions_issued/'
                                  \___ value too big for format, maximum is 4294967295

This patch fix this issue and changes starting_index value to '0xffffffff'

After this patch:

command#: perf stat -e hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/ -C 0 -I 1000
     1.000085786              1,024      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
     2.000287818              1,024      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
     2.439113909             17,408      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/

Fixes: 9e9f60108423 ("powerpc/perf/{hv-gpci, hv-common}: generate requests with counters annotated")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201003074943.338618-1-kjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/perf: Exclude pmc5/6 from the irrelevant PMU group constraints 2020-10-29T08:57:51+00:00 Athira Rajeev atrajeev@linux.vnet.ibm.com 2020-09-21T07:10:04+00:00 271e53005a260edab7a0784c2844fc01f0c8b09e [ Upstream commit 3b6c3adbb2fa42749c3d38cfc4d4d0b7e096bb7b ] PMU counter support functions enforces event constraints for group of events to check if all events in a group can be monitored. Incase of event codes using PMC5 and PMC6 ( 500fa and 600f4 respectively ), not all constraints are applicable, say the threshold or sample bits. But current code includes pmc5 and pmc6 in some group constraints (like IC_DC Qualifier bits) which is actually not applicable and hence results in those events not getting counted when scheduled along with group of other events. Patch fixes this by excluding PMC5/6 from constraints which are not relevant for it. Fixes: 7ffd948 ("powerpc/perf: factor out power8 pmu functions") Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1600672204-1610-1-git-send-email-atrajeev@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 3b6c3adbb2fa42749c3d38cfc4d4d0b7e096bb7b ]

PMU counter support functions enforces event constraints for group of
events to check if all events in a group can be monitored. Incase of
event codes using PMC5 and PMC6 ( 500fa and 600f4 respectively ), not
all constraints are applicable, say the threshold or sample bits. But
current code includes pmc5 and pmc6 in some group constraints (like
IC_DC Qualifier bits) which is actually not applicable and hence
results in those events not getting counted when scheduled along with
group of other events. Patch fixes this by excluding PMC5/6 from
constraints which are not relevant for it.

Fixes: 7ffd948 ("powerpc/perf: factor out power8 pmu functions")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1600672204-1610-1-git-send-email-atrajeev@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/64s/radix: Fix mm_cpumask trimming race vs kthread_use_mm 2020-10-29T08:57:49+00:00 Nicholas Piggin npiggin@gmail.com 2020-09-14T04:52:19+00:00 557c184df3c54a894e786a422f87faacbe102a75 [ Upstream commit a665eec0a22e11cdde708c1c256a465ebe768047 ] Commit 0cef77c7798a7 ("powerpc/64s/radix: flush remote CPUs out of single-threaded mm_cpumask") added a mechanism to trim the mm_cpumask of a process under certain conditions. One of the assumptions is that mm_users would not be incremented via a reference outside the process context with mmget_not_zero() then go on to kthread_use_mm() via that reference. That invariant was broken by io_uring code (see previous sparc64 fix), but I'll point Fixes: to the original powerpc commit because we are changing that assumption going forward, so this will make backports match up. Fix this by no longer relying on that assumption, but by having each CPU check the mm is not being used, and clearing their own bit from the mask only if it hasn't been switched-to by the time the IPI is processed. This relies on commit 38cf307c1f20 ("mm: fix kthread_use_mm() vs TLB invalidate") and ARCH_WANT_IRQS_OFF_ACTIVATE_MM to disable irqs over mm switch sequences. Fixes: 0cef77c7798a7 ("powerpc/64s/radix: flush remote CPUs out of single-threaded mm_cpumask") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> Depends-on: 38cf307c1f20 ("mm: fix kthread_use_mm() vs TLB invalidate") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200914045219.3736466-5-npiggin@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a665eec0a22e11cdde708c1c256a465ebe768047 ]

Commit 0cef77c7798a7 ("powerpc/64s/radix: flush remote CPUs out of
single-threaded mm_cpumask") added a mechanism to trim the mm_cpumask of
a process under certain conditions. One of the assumptions is that
mm_users would not be incremented via a reference outside the process
context with mmget_not_zero() then go on to kthread_use_mm() via that
reference.

That invariant was broken by io_uring code (see previous sparc64 fix),
but I'll point Fixes: to the original powerpc commit because we are
changing that assumption going forward, so this will make backports
match up.

Fix this by no longer relying on that assumption, but by having each CPU
check the mm is not being used, and clearing their own bit from the mask
only if it hasn't been switched-to by the time the IPI is processed.

This relies on commit 38cf307c1f20 ("mm: fix kthread_use_mm() vs TLB
invalidate") and ARCH_WANT_IRQS_OFF_ACTIVATE_MM to disable irqs over mm
switch sequences.

Fixes: 0cef77c7798a7 ("powerpc/64s/radix: flush remote CPUs out of single-threaded mm_cpumask")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au>
Depends-on: 38cf307c1f20 ("mm: fix kthread_use_mm() vs TLB invalidate")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200914045219.3736466-5-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/tau: Disable TAU between measurements 2020-10-29T08:57:49+00:00 Finn Thain fthain@telegraphics.com.au 2020-09-04T23:02:20+00:00 148d4f4dc75e78c748a72da3d1bd138cea867a80 [ Upstream commit e63d6fb5637e92725cf143559672a34b706bca4f ] Enabling CONFIG_TAU_INT causes random crashes: Unrecoverable exception 1700 at c0009414 (msr=1000) Oops: Unrecoverable exception, sig: 6 [#1] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-pmac-00043-gd5f545e1a8593 #5 NIP: c0009414 LR: c0009414 CTR: c00116fc REGS: c0799eb8 TRAP: 1700 Not tainted (5.7.0-pmac-00043-gd5f545e1a8593) MSR: 00001000 <ME> CR: 22000228 XER: 00000100 GPR00: 00000000 c0799f70 c076e300 00800000 0291c0ac 00e00000 c076e300 00049032 GPR08: 00000001 c00116fc 00000000 dfbd3200 ffffffff 007f80a8 00000000 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 c075ce04 GPR24: c075ce04 dfff8880 c07b0000 c075ce04 00080000 00000001 c079ef98 c079ef5c NIP [c0009414] arch_cpu_idle+0x24/0x6c LR [c0009414] arch_cpu_idle+0x24/0x6c Call Trace: [c0799f70] [00000001] 0x1 (unreliable) [c0799f80] [c0060990] do_idle+0xd8/0x17c [c0799fa0] [c0060ba4] cpu_startup_entry+0x20/0x28 [c0799fb0] [c072d220] start_kernel+0x434/0x44c [c0799ff0] [00003860] 0x3860 Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX 3d20c07b XXXXXXXX XXXXXXXX XXXXXXXX 7c0802a6 XXXXXXXX XXXXXXXX XXXXXXXX 4e800421 XXXXXXXX XXXXXXXX XXXXXXXX 7d2000a6 ---[ end trace 3a0c9b5cb216db6b ]--- Resolve this problem by disabling each THRMn comparator when handling the associated THRMn interrupt and by disabling the TAU entirely when updating THRMn thresholds. Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2") Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/5a0ba3dc5612c7aac596727331284a3676c08472.1599260540.git.fthain@telegraphics.com.au Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e63d6fb5637e92725cf143559672a34b706bca4f ]

Enabling CONFIG_TAU_INT causes random crashes:

Unrecoverable exception 1700 at c0009414 (msr=1000)
Oops: Unrecoverable exception, sig: 6 [#1]
BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-pmac-00043-gd5f545e1a8593 #5
NIP:  c0009414 LR: c0009414 CTR: c00116fc
REGS: c0799eb8 TRAP: 1700   Not tainted  (5.7.0-pmac-00043-gd5f545e1a8593)
MSR:  00001000 <ME>  CR: 22000228  XER: 00000100

GPR00: 00000000 c0799f70 c076e300 00800000 0291c0ac 00e00000 c076e300 00049032
GPR08: 00000001 c00116fc 00000000 dfbd3200 ffffffff 007f80a8 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 c075ce04
GPR24: c075ce04 dfff8880 c07b0000 c075ce04 00080000 00000001 c079ef98 c079ef5c
NIP [c0009414] arch_cpu_idle+0x24/0x6c
LR [c0009414] arch_cpu_idle+0x24/0x6c
Call Trace:
[c0799f70] [00000001] 0x1 (unreliable)
[c0799f80] [c0060990] do_idle+0xd8/0x17c
[c0799fa0] [c0060ba4] cpu_startup_entry+0x20/0x28
[c0799fb0] [c072d220] start_kernel+0x434/0x44c
[c0799ff0] [00003860] 0x3860
Instruction dump:
XXXXXXXX XXXXXXXX XXXXXXXX 3d20c07b XXXXXXXX XXXXXXXX XXXXXXXX 7c0802a6
XXXXXXXX XXXXXXXX XXXXXXXX 4e800421 XXXXXXXX XXXXXXXX XXXXXXXX 7d2000a6
---[ end trace 3a0c9b5cb216db6b ]---

Resolve this problem by disabling each THRMn comparator when handling
the associated THRMn interrupt and by disabling the TAU entirely when
updating THRMn thresholds.

Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5a0ba3dc5612c7aac596727331284a3676c08472.1599260540.git.fthain@telegraphics.com.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/tau: Check processor type before enabling TAU interrupt 2020-10-29T08:57:49+00:00 Finn Thain fthain@telegraphics.com.au 2020-09-04T23:02:20+00:00 72407b8d08b359253835d3d3d0604dfcb65bb53f [ Upstream commit 5e3119e15fed5b9a9a7e528665ff098a4a8dbdbc ] According to Freescale's documentation, MPC74XX processors have an erratum that prevents the TAU interrupt from working, so don't try to use it when running on those processors. Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2") Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/c281611544768e758bd58fe812cf702a5bd2d042.1599260540.git.fthain@telegraphics.com.au Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 5e3119e15fed5b9a9a7e528665ff098a4a8dbdbc ]

According to Freescale's documentation, MPC74XX processors have an
erratum that prevents the TAU interrupt from working, so don't try to
use it when running on those processors.

Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c281611544768e758bd58fe812cf702a5bd2d042.1599260540.git.fthain@telegraphics.com.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/tau: Remove duplicated set_thresholds() call 2020-10-29T08:57:49+00:00 Finn Thain fthain@telegraphics.com.au 2020-09-04T23:02:20+00:00 68a8ec0b022f2247e46b95f2c5f8eacee8872acf [ Upstream commit 420ab2bc7544d978a5d0762ee736412fe9c796ab ] The commentary at the call site seems to disagree with the code. The conditional prevents calling set_thresholds() via the exception handler, which appears to crash. Perhaps that's because it immediately triggers another TAU exception. Anyway, calling set_thresholds() from TAUupdate() is redundant because tau_timeout() does so. Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2") Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/d7c7ee33232cf72a6a6bbb6ef05838b2e2b113c0.1599260540.git.fthain@telegraphics.com.au Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 420ab2bc7544d978a5d0762ee736412fe9c796ab ]

The commentary at the call site seems to disagree with the code. The
conditional prevents calling set_thresholds() via the exception handler,
which appears to crash. Perhaps that's because it immediately triggers
another TAU exception. Anyway, calling set_thresholds() from TAUupdate()
is redundant because tau_timeout() does so.

Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d7c7ee33232cf72a6a6bbb6ef05838b2e2b113c0.1599260540.git.fthain@telegraphics.com.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/tau: Convert from timer to workqueue 2020-10-29T08:57:49+00:00 Finn Thain fthain@telegraphics.com.au 2020-09-04T23:02:20+00:00 c0578b423b5e1f51b9bc2a9549facc35f25090be [ Upstream commit b1c6a0a10bfaf36ec82fde6f621da72407fa60a1 ] Since commit 19dbdcb8039cf ("smp: Warn on function calls from softirq context") the Thermal Assist Unit driver causes a warning like the following when CONFIG_SMP is enabled. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/smp.c:428 smp_call_function_many_cond+0xf4/0x38c Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-pmac #3 NIP: c00b37a8 LR: c00b3abc CTR: c001218c REGS: c0799c60 TRAP: 0700 Not tainted (5.7.0-pmac) MSR: 00029032 <EE,ME,IR,DR,RI> CR: 42000224 XER: 00000000 GPR00: c00b3abc c0799d18 c076e300 c079ef5c c0011fec 00000000 00000000 00000000 GPR08: 00000100 00000100 00008000 ffffffff 42000224 00000000 c079d040 c079d044 GPR16: 00000001 00000000 00000004 c0799da0 c079f054 c07a0000 c07a0000 00000000 GPR24: c0011fec 00000000 c079ef5c c079ef5c 00000000 00000000 00000000 00000000 NIP [c00b37a8] smp_call_function_many_cond+0xf4/0x38c LR [c00b3abc] on_each_cpu+0x38/0x68 Call Trace: [c0799d18] [ffffffff] 0xffffffff (unreliable) [c0799d68] [c00b3abc] on_each_cpu+0x38/0x68 [c0799d88] [c0096704] call_timer_fn.isra.26+0x20/0x7c [c0799d98] [c0096b40] run_timer_softirq+0x1d4/0x3fc [c0799df8] [c05b4368] __do_softirq+0x118/0x240 [c0799e58] [c0039c44] irq_exit+0xc4/0xcc [c0799e68] [c000ade8] timer_interrupt+0x1b0/0x230 [c0799ea8] [c0013520] ret_from_except+0x0/0x14 --- interrupt: 901 at arch_cpu_idle+0x24/0x6c LR = arch_cpu_idle+0x24/0x6c [c0799f70] [00000001] 0x1 (unreliable) [c0799f80] [c0060990] do_idle+0xd8/0x17c [c0799fa0] [c0060ba8] cpu_startup_entry+0x24/0x28 [c0799fb0] [c072d220] start_kernel+0x434/0x44c [c0799ff0] [00003860] 0x3860 Instruction dump: 8129f204 2f890000 40beff98 3d20c07a 8929eec4 2f890000 40beff88 0fe00000 81220000 552805de 550802ef 4182ff84 <0fe00000> 3860ffff 7f65db78 7f44d378 ---[ end trace 34a886e47819c2eb ]--- Don't call on_each_cpu() from a timer callback, call it from a worker thread instead. Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2") Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/bb61650bea4f4c91fb8e24b9a6f130a1438651a7.1599260540.git.fthain@telegraphics.com.au Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b1c6a0a10bfaf36ec82fde6f621da72407fa60a1 ]

Since commit 19dbdcb8039cf ("smp: Warn on function calls from softirq
context") the Thermal Assist Unit driver causes a warning like the
following when CONFIG_SMP is enabled.

  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 0 at kernel/smp.c:428 smp_call_function_many_cond+0xf4/0x38c
  Modules linked in:
  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-pmac #3
  NIP:  c00b37a8 LR: c00b3abc CTR: c001218c
  REGS: c0799c60 TRAP: 0700   Not tainted  (5.7.0-pmac)
  MSR:  00029032 <EE,ME,IR,DR,RI>  CR: 42000224  XER: 00000000
  GPR00: c00b3abc c0799d18 c076e300 c079ef5c c0011fec 00000000 00000000 00000000
  GPR08: 00000100 00000100 00008000 ffffffff 42000224 00000000 c079d040 c079d044
  GPR16: 00000001 00000000 00000004 c0799da0 c079f054 c07a0000 c07a0000 00000000
  GPR24: c0011fec 00000000 c079ef5c c079ef5c 00000000 00000000 00000000 00000000
  NIP [c00b37a8] smp_call_function_many_cond+0xf4/0x38c
  LR [c00b3abc] on_each_cpu+0x38/0x68
  Call Trace:
  [c0799d18] [ffffffff] 0xffffffff (unreliable)
  [c0799d68] [c00b3abc] on_each_cpu+0x38/0x68
  [c0799d88] [c0096704] call_timer_fn.isra.26+0x20/0x7c
  [c0799d98] [c0096b40] run_timer_softirq+0x1d4/0x3fc
  [c0799df8] [c05b4368] __do_softirq+0x118/0x240
  [c0799e58] [c0039c44] irq_exit+0xc4/0xcc
  [c0799e68] [c000ade8] timer_interrupt+0x1b0/0x230
  [c0799ea8] [c0013520] ret_from_except+0x0/0x14
  --- interrupt: 901 at arch_cpu_idle+0x24/0x6c
      LR = arch_cpu_idle+0x24/0x6c
  [c0799f70] [00000001] 0x1 (unreliable)
  [c0799f80] [c0060990] do_idle+0xd8/0x17c
  [c0799fa0] [c0060ba8] cpu_startup_entry+0x24/0x28
  [c0799fb0] [c072d220] start_kernel+0x434/0x44c
  [c0799ff0] [00003860] 0x3860
  Instruction dump:
  8129f204 2f890000 40beff98 3d20c07a 8929eec4 2f890000 40beff88 0fe00000
  81220000 552805de 550802ef 4182ff84 <0fe00000> 3860ffff 7f65db78 7f44d378
  ---[ end trace 34a886e47819c2eb ]---

Don't call on_each_cpu() from a timer callback, call it from a worker
thread instead.

Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bb61650bea4f4c91fb8e24b9a6f130a1438651a7.1599260540.git.fthain@telegraphics.com.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/tau: Use appropriate temperature sample interval 2020-10-29T08:57:49+00:00 Finn Thain fthain@telegraphics.com.au 2020-09-04T23:02:20+00:00 0305488040dce95feb8705e1e0270a7df04860e2 [ Upstream commit 66943005cc41f48e4d05614e8f76c0ca1812f0fd ] According to the MPC750 Users Manual, the SITV value in Thermal Management Register 3 is 13 bits long. The present code calculates the SITV value as 60 * 500 cycles. This would overflow to give 10 us on a 500 MHz CPU rather than the intended 60 us. (But according to the Microprocessor Datasheet, there is also a factor of 266 that has to be applied to this value on certain parts i.e. speed sort above 266 MHz.) Always use the maximum cycle count, as recommended by the Datasheet. Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2") Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/896f542e5f0f1d6cf8218524c2b67d79f3d69b3c.1599260540.git.fthain@telegraphics.com.au Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 66943005cc41f48e4d05614e8f76c0ca1812f0fd ]

According to the MPC750 Users Manual, the SITV value in Thermal
Management Register 3 is 13 bits long. The present code calculates the
SITV value as 60 * 500 cycles. This would overflow to give 10 us on
a 500 MHz CPU rather than the intended 60 us. (But according to the
Microprocessor Datasheet, there is also a factor of 266 that has to be
applied to this value on certain parts i.e. speed sort above 266 MHz.)
Always use the maximum cycle count, as recommended by the Datasheet.

Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/896f542e5f0f1d6cf8218524c2b67d79f3d69b3c.1599260540.git.fthain@telegraphics.com.au
Signed-off-by: Sasha Levin <sashal@kernel.org>