commit d7e23b887f67178c4f840781be7a6aa6aeb52ab1 upstream.
Due to commit 4a6d8cf90017 ("powerpc/mm: don't use pte_alloc_kernel()
until slab is available on PPC32"), pte_alloc_kernel() cannot be used
during early KASAN init.
Fix it by using memblock_alloc() instead.
Fixes: 2edb16efc899 ("powerpc/32: Add KASAN support")
Cc: stable@vger.kernel.org # v5.2+
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/da89670093651437f27d2975224712e0a130b055.1564552796.git.christophe.leroy@c-s.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 28d2a6e6684d9851905f379816d8a4d03587ed94 upstream.
The ability to run nested guests under KVM means that a guest can also
act as a hypervisor for it's own nested guest. Currently
ppc_set_pmu_inuse() assumes that either FW_FEATURE_LPAR is set,
indicating a guest environment, and so sets the pmcregs_in_use flag in
the lppaca, or that it isn't set, indicating a hypervisor environment,
and so sets the pmcregs_in_use flag in the paca.
The pmcregs_in_use flag in the lppaca is used to communicate this
information to a hypervisor and so must be set in a guest environment.
The pmcregs_in_use flag in the paca is used by KVM code to determine
whether the host state of the performance monitoring unit (PMU) must
be saved and restored when running a guest.
Thus when a guest also acts as a hypervisor it must set this bit in
both places since it needs to ensure both that the real hypervisor
saves it's PMU registers when it runs (requires pmcregs_in_use flag in
lppaca), and that it saves it's own PMU registers when running a
nested guest (requires pmcregs_in_use flag in paca).
Modify ppc_set_pmu_inuse() so that the pmcregs_in_use bit is set in
both the lppaca and the paca when a guest (LPAR) is running with the
capability of running it's own guests (CONFIG_KVM_BOOK3S_HV_POSSIBLE).
Fixes: 95a6432ce903 ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190703012022.15644-2-sjitindarsingh@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f16d80b75a096c52354c6e0a574993f3b0dfbdfe upstream.
On systems like P9 powernv where we have no TM (or P8 booted with
ppc_tm=off), userspace can construct a signal context which still has
the MSR TS bits set. The kernel tries to restore this context which
results in the following crash:
Unexpected TM Bad Thing exception at c0000000000022fc (msr 0x8000000102a03031) tm_scratch=800000020280f033
Oops: Unrecoverable exception, sig: 6 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 0 PID: 1636 Comm: sigfuz Not tainted 5.2.0-11043-g0a8ad0ffa4 #69
NIP: c0000000000022fc LR: 00007fffb2d67e48 CTR: 0000000000000000
REGS: c00000003fffbd70 TRAP: 0700 Not tainted (5.2.0-11045-g7142b497d8)
MSR: 8000000102a03031 <SF,VEC,VSX,FP,ME,IR,DR,LE,TM[E]> CR: 42004242 XER: 00000000
CFAR: c0000000000022e0 IRQMASK: 0
GPR00: 0000000000000072 00007fffb2b6e560 00007fffb2d87f00 0000000000000669
GPR04: 00007fffb2b6e728 0000000000000000 0000000000000000 00007fffb2b6f2a8
GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR12: 0000000000000000 00007fffb2b76900 0000000000000000 0000000000000000
GPR16: 00007fffb2370000 00007fffb2d84390 00007fffea3a15ac 000001000a250420
GPR20: 00007fffb2b6f260 0000000010001770 0000000000000000 0000000000000000
GPR24: 00007fffb2d843a0 00007fffea3a14a0 0000000000010000 0000000000800000
GPR28: 00007fffea3a14d8 00000000003d0f00 0000000000000000 00007fffb2b6e728
NIP [c0000000000022fc] rfi_flush_fallback+0x7c/0x80
LR [00007fffb2d67e48] 0x7fffb2d67e48
Call Trace:
Instruction dump:
e96a0220 e96a02a8 e96a0330 e96a03b8 394a0400 4200ffdc 7d2903a6 e92d0c00
e94d0c08 e96d0c10 e82d0c18 7db242a6 <4c000024> 7db243a6 7db142a6 f82d0c18
The problem is the signal code assumes TM is enabled when
CONFIG_PPC_TRANSACTIONAL_MEM is enabled. This may not be the case as
with P9 powernv or if `ppc_tm=off` is used on P8.
This means any local user can crash the system.
Fix the problem by returning a bad stack frame to the user if they try
to set the MSR TS bits with sigreturn() on systems where TM is not
supported.
Found with sigfuz kernel selftest on P9.
This fixes CVE-2019-13648.
Fixes: 2b0a576d15e0 ("powerpc: Add new transactional memory state to the signal context")
Cc: stable@vger.kernel.org # v3.9
Reported-by: Praveen Pandey <Praveen.Pandey@in.ibm.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190719050502.405-1-mikey@neuling.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da0ef93310e67ae6902efded60b6724dab27a5d1 upstream.
The virtual real mode addressing (VRMA) mechanism is used when a
partition is using HPT (Hash Page Table) translation and performs real
mode accesses (MSR[IR|DR] = 0) in non-hypervisor mode. In this mode
effective address bits 0:23 are treated as zero (i.e. the access is
aliased to 0) and the access is performed using an implicit 1TB SLB
entry.
The size of the RMA (Real Memory Area) is communicated to the guest as
the size of the first memory region in the device tree. And because of
the mechanism described above can be expected to not exceed 1TB. In
the event that the host erroneously represents the RMA as being larger
than 1TB, guest accesses in real mode to memory addresses above 1TB
will be aliased down to below 1TB. This means that a memory access
performed in real mode may differ to one performed in virtual mode for
the same memory address, which would likely have unintended
consequences.
To avoid this outcome have the guest explicitly limit the size of the
RMA to the current maximum, which is 1TB. This means that even if the
first memory block is larger than 1TB, only the first 1TB should be
accessed in real mode.
Fixes: c610d65c0ad0 ("powerpc/pseries: lift RTAS limit for hash")
Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190710052018.14628-1-sjitindarsingh@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d202c8c8ed3822327285747db1765967110b274 upstream.
xive_find_target_in_mask() has the following for(;;) loop which has a
bug when @first == cpumask_first(@mask) and condition 1 fails to hold
for every CPU in @mask. In this case we loop forever in the for-loop.
first = cpu;
for (;;) {
if (cpu_online(cpu) && xive_try_pick_target(cpu)) // condition 1
return cpu;
cpu = cpumask_next(cpu, mask);
if (cpu == first) // condition 2
break;
if (cpu >= nr_cpu_ids) // condition 3
cpu = cpumask_first(mask);
}
This is because, when @first == cpumask_first(@mask), we never hit the
condition 2 (cpu == first) since prior to this check, we would have
executed "cpu = cpumask_next(cpu, mask)" which will set the value of
@cpu to a value greater than @first or to nr_cpus_ids. When this is
coupled with the fact that condition 1 is not met, we will never exit
this loop.
This was discovered by the hard-lockup detector while running LTP test
concurrently with SMT switch tests.
watchdog: CPU 12 detected hard LOCKUP on other CPUs 68
watchdog: CPU 12 TB:85587019220796, last SMP heartbeat TB:85578827223399 (15999ms ago)
watchdog: CPU 68 Hard LOCKUP
watchdog: CPU 68 TB:85587019361273, last heartbeat TB:85576815065016 (19930ms ago)
CPU: 68 PID: 45050 Comm: hxediag Kdump: loaded Not tainted 4.18.0-100.el8.ppc64le #1
NIP: c0000000006f5578 LR: c000000000cba9ec CTR: 0000000000000000
REGS: c000201fff3c7d80 TRAP: 0100 Not tainted (4.18.0-100.el8.ppc64le)
MSR: 9000000002883033 <SF,HV,VEC,VSX,FP,ME,IR,DR,RI,LE> CR: 24028424 XER: 00000000
CFAR: c0000000006f558c IRQMASK: 1
GPR00: c0000000000afc58 c000201c01c43400 c0000000015ce500 c000201cae26ec18
GPR04: 0000000000000800 0000000000000540 0000000000000800 00000000000000f8
GPR08: 0000000000000020 00000000000000a8 0000000080000000 c00800001a1beed8
GPR12: c0000000000b1410 c000201fff7f4c00 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000540 0000000000000001
GPR20: 0000000000000048 0000000010110000 c00800001a1e3780 c000201cae26ed18
GPR24: 0000000000000000 c000201cae26ed8c 0000000000000001 c000000001116bc0
GPR28: c000000001601ee8 c000000001602494 c000201cae26ec18 000000000000001f
NIP [c0000000006f5578] find_next_bit+0x38/0x90
LR [c000000000cba9ec] cpumask_next+0x2c/0x50
Call Trace:
[c000201c01c43400] [c000201cae26ec18] 0xc000201cae26ec18 (unreliable)
[c000201c01c43420] [c0000000000afc58] xive_find_target_in_mask+0x1b8/0x240
[c000201c01c43470] [c0000000000b0228] xive_pick_irq_target.isra.3+0x168/0x1f0
[c000201c01c435c0] [c0000000000b1470] xive_irq_startup+0x60/0x260
[c000201c01c43640] [c0000000001d8328] __irq_startup+0x58/0xf0
[c000201c01c43670] [c0000000001d844c] irq_startup+0x8c/0x1a0
[c000201c01c436b0] [c0000000001d57b0] __setup_irq+0x9f0/0xa90
[c000201c01c43760] [c0000000001d5aa0] request_threaded_irq+0x140/0x220
[c000201c01c437d0] [c00800001a17b3d4] bnx2x_nic_load+0x188c/0x3040 [bnx2x]
[c000201c01c43950] [c00800001a187c44] bnx2x_self_test+0x1fc/0x1f70 [bnx2x]
[c000201c01c43a90] [c000000000adc748] dev_ethtool+0x11d8/0x2cb0
[c000201c01c43b60] [c000000000b0b61c] dev_ioctl+0x5ac/0xa50
[c000201c01c43bf0] [c000000000a8d4ec] sock_do_ioctl+0xbc/0x1b0
[c000201c01c43c60] [c000000000a8dfb8] sock_ioctl+0x258/0x4f0
[c000201c01c43d20] [c0000000004c9704] do_vfs_ioctl+0xd4/0xa70
[c000201c01c43de0] [c0000000004ca274] sys_ioctl+0xc4/0x160
[c000201c01c43e30] [c00000000000b388] system_call+0x5c/0x70
Instruction dump:
78aad182 54a806be 3920ffff 78a50664 794a1f24 7d294036 7d43502a 7d295039
4182001c 48000034 78a9d182 79291f24 <7d23482a> 2fa90000 409e0020 38a50040
To fix this, move the check for condition 2 after the check for
condition 3, so that we are able to break out of the loop soon after
iterating through all the CPUs in the @mask in the problem case. Use
do..while() to achieve this.
Fixes: 243e25112d06 ("powerpc/xive: Native exploitation of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.12+
Reported-by: Indira P. Joga <indira.priya@in.ibm.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1563359724-13931-1-git-send-email-ego@linux.vnet.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b4fc36e60f25cf22bf8b7b015a701015740c3743 upstream.
The refactor of powerpc DMA functions in commit 6666cc17d780
("powerpc/dma: remove dma_nommu_mmap_coherent") incorrectly
changes the way DMA mappings are handled on powerpc.
Since this change, all mapped pages are marked as cache-inhibited
through the default implementation of arch_dma_mmap_pgprot.
This differs from the previous behavior of only marking pages
in noncoherent mappings as cache-inhibited and has resulted in
sporadic system crashes in certain hardware configurations and
workloads (see Bugzilla).
This commit restores the previous correct behavior by providing
an implementation of arch_dma_mmap_pgprot that only marks
pages in noncoherent mappings as cache-inhibited. As this behavior
should be universal for all powerpc platforms a new file,
dma-generic.c, was created to store it.
Fixes: 6666cc17d780 ("powerpc/dma: remove dma_nommu_mmap_coherent")
# NOTE: fixes commit 6666cc17d780 released in v5.1.
# Consider a stable tag:
# Cc: stable@vger.kernel.org # v5.1+
# NOTE: fixes commit 6666cc17d780 released in v5.1.
# Consider a stable tag:
# Cc: stable@vger.kernel.org # v5.1+
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Shawn Anastasio <shawn@anastas.io>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190717235437.12908-1-shawn@anastas.io
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9798f4ea71eaf8eaad7e688c5b298528089c7bf8 upstream.
The XIVE device structure is now allocated in kvmppc_xive_get_device()
and kfree'd in kvmppc_core_destroy_vm(). In case of an OPAL error when
allocating the XIVE VPs, the kfree() call in kvmppc_xive_*create()
will result in a double free and corrupt the host memory.
Fixes: 5422e95103cf ("KVM: PPC: Book3S HV: XIVE: Replace the 'destroy' method by a 'release' method")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6ea6998b-a890-2511-01d1-747d7621eb19@kaod.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c8b4083db915dfe5a3b4a755ad2317e0509b43f1 upstream.
The Performance Stop Status and Control Register (PSSCR) is used to
control the power saving facilities of the processor. This register
has various fields, some of which can be modified only in hypervisor
state, and others which can be modified in both hypervisor and
privileged non-hypervisor state. The bits which can be modified in
privileged non-hypervisor state are referred to as guest visible.
Currently the L0 hypervisor saves and restores both it's own host
value as well as the guest value of the PSSCR when context switching
between the hypervisor and guest. However a nested hypervisor running
it's own nested guests (as indicated by kvmhv_on_pseries()) doesn't
context switch the PSSCR register. That means if a nested (L2) guest
modifies the PSSCR then the L1 guest hypervisor will run with that
modified value, and if the L1 guest hypervisor modifies the PSSCR and
then goes to run the nested (L2) guest again then the L2 PSSCR value
will be lost.
Fix this by having the (L1) nested hypervisor save and restore both
its host and the guest PSSCR value when entering and exiting a
nested (L2) guest. Note that only the guest visible parts of the PSSCR
are context switched since this is all the L1 nested hypervisor can
access, this is fine however as these are the only fields the L0
hypervisor provides guest control of anyway and so all other fields
are ignored.
This could also have been implemented by adding the PSSCR register to
the hv_regs passed to the L0 hypervisor as input to the H_ENTER_NESTED
hcall, however this would have meant updating the structure layout and
thus required modifications to both the L0 and L1 kernels. Whereas the
approach used doesn't require L0 kernel modifications while achieving
the same result.
Fixes: 95a6432ce903 ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190703012022.15644-3-sjitindarsingh@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 63279eeb7f93abb1692573c26f1e038e1a87358b upstream.
The performance monitoring unit (PMU) registers are saved on guest
exit when the guest has set the pmcregs_in_use flag in its lppaca, if
it exists, or unconditionally if it doesn't. If a nested guest is
being run then the hypervisor doesn't, and in most cases can't, know
if the PMU registers are in use since it doesn't know the location of
the lppaca for the nested guest, although it may have one for its
immediate guest. This results in the values of these registers being
lost across nested guest entry and exit in the case where the nested
guest was making use of the performance monitoring facility while it's
nested guest hypervisor wasn't.
Further more the hypervisor could interrupt a guest hypervisor between
when it has loaded up the PMU registers and it calling H_ENTER_NESTED
or between returning from the nested guest to the guest hypervisor and
the guest hypervisor reading the PMU registers, in
kvmhv_p9_guest_entry(). This means that it isn't sufficient to just
save the PMU registers when entering or exiting a nested guest, but
that it is necessary to always save the PMU registers whenever a guest
is capable of running nested guests to ensure the register values
aren't lost in the context switch.
Ensure the PMU register values are preserved by always saving their
value into the vcpu struct when a guest is capable of running nested
guests.
This should have minimal performance impact however any impact can be
avoided by booting a guest with "-machine pseries,cap-nested-hv=false"
on the qemu commandline.
Fixes: 95a6432ce903 ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190703012022.15644-1-sjitindarsingh@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 33439620680be5225c1b8806579a291e0d761ca0 ]
In commit 4a7b06c157a2 ("powerpc/eeh: Handle hugepages in ioremap
space") support for using hugepages in the vmalloc and ioremap areas was
enabled for radix. Unfortunately this broke EEH MMIO error checking.
Detection works by inserting a hook which checks the results of the
ioreadXX() set of functions. When a read returns a 0xFFs response we
need to check for an error which we do by mapping the (virtual) MMIO
address back to a physical address, then mapping physical address to a
PCI device via an interval tree.
When translating virt -> phys we currently assume the ioremap space is
only populated by PAGE_SIZE mappings. If a hugepage mapping is found we
emit a WARN_ON(), but otherwise handles the check as though a normal
page was found. In pathalogical cases such as copying a buffer
containing a lot of 0xFFs from BAR memory this can result in the system
not booting because it's too busy printing WARN_ON()s.
There's no real reason to assume huge pages can't be present and we're
prefectly capable of handling them, so do that.
Fixes: 4a7b06c157a2 ("powerpc/eeh: Handle hugepages in ioremap space")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190710150517.27114-1-oohall@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>