linux-stable.git/arch/powerpc, branch v4.9.321 Linux kernel stable tree powerpc/pseries: wire up rng during setup_arch() 2022-07-02T14:17:16+00:00 Jason A. Donenfeld Jason@zx2c4.com 2022-06-11T15:10:15+00:00 a2f8cfa63f55d879cf28db3ede0ff055cd1d1a84 commit e561e472a3d441753bd012333b057f48fef1045b upstream. The platform's RNG must be available before random_init() in order to be useful for initial seeding, which in turn means that it needs to be called from setup_arch(), rather than from an init call. Fortunately, each platform already has a setup_arch function pointer, which means it's easy to wire this up. This commit also removes some noisy log messages that don't add much. Fixes: a489043f4626 ("powerpc/pseries: Implement arch_get_random_long() based on H_RANDOM") Cc: stable@vger.kernel.org # v3.13+ Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220611151015.548325-4-Jason@zx2c4.com Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e561e472a3d441753bd012333b057f48fef1045b upstream.

The platform's RNG must be available before random_init() in order to be
useful for initial seeding, which in turn means that it needs to be
called from setup_arch(), rather than from an init call. Fortunately,
each platform already has a setup_arch function pointer, which means
it's easy to wire this up. This commit also removes some noisy log
messages that don't add much.

Fixes: a489043f4626 ("powerpc/pseries: Implement arch_get_random_long() based on H_RANDOM")
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220611151015.548325-4-Jason@zx2c4.com
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc: Enable execve syscall exit tracepoint 2022-07-02T14:17:15+00:00 Naveen N. Rao naveen.n.rao@linux.vnet.ibm.com 2022-06-09T10:33:28+00:00 9c58e6d866892380dc70aa9a8a7dd2b47da7dce0 commit ec6d0dde71d760aa60316f8d1c9a1b0d99213529 upstream. On execve[at], we are zero'ing out most of the thread register state including gpr[0], which contains the syscall number. Due to this, we fail to trigger the syscall exit tracepoint properly. Fix this by retaining gpr[0] in the thread register state. Before this patch: # tail /sys/kernel/debug/tracing/trace cat-123 [000] ..... 61.449351: sys_execve(filename: 7fffa6b23448, argv: 7fffa6b233e0, envp: 7fffa6b233f8) cat-124 [000] ..... 62.428481: sys_execve(filename: 7fffa6b23448, argv: 7fffa6b233e0, envp: 7fffa6b233f8) echo-125 [000] ..... 65.813702: sys_execve(filename: 7fffa6b23378, argv: 7fffa6b233a0, envp: 7fffa6b233b0) echo-125 [000] ..... 65.822214: sys_execveat(fd: 0, filename: 1009ac48, argv: 7ffff65d0c98, envp: 7ffff65d0ca8, flags: 0) After this patch: # tail /sys/kernel/debug/tracing/trace cat-127 [000] ..... 100.416262: sys_execve(filename: 7fffa41b3448, argv: 7fffa41b33e0, envp: 7fffa41b33f8) cat-127 [000] ..... 100.418203: sys_execve -> 0x0 echo-128 [000] ..... 103.873968: sys_execve(filename: 7fffa41b3378, argv: 7fffa41b33a0, envp: 7fffa41b33b0) echo-128 [000] ..... 103.875102: sys_execve -> 0x0 echo-128 [000] ..... 103.882097: sys_execveat(fd: 0, filename: 1009ac48, argv: 7fffd10d2148, envp: 7fffd10d2158, flags: 0) echo-128 [000] ..... 103.883225: sys_execveat -> 0x0 Cc: stable@vger.kernel.org Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Tested-by: Sumit Dubey2 <Sumit.Dubey2@ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220609103328.41306-1-naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ec6d0dde71d760aa60316f8d1c9a1b0d99213529 upstream.

On execve[at], we are zero'ing out most of the thread register state
including gpr[0], which contains the syscall number. Due to this, we
fail to trigger the syscall exit tracepoint properly. Fix this by
retaining gpr[0] in the thread register state.

Before this patch:
  # tail /sys/kernel/debug/tracing/trace
	       cat-123     [000] .....    61.449351: sys_execve(filename:
  7fffa6b23448, argv: 7fffa6b233e0, envp: 7fffa6b233f8)
	       cat-124     [000] .....    62.428481: sys_execve(filename:
  7fffa6b23448, argv: 7fffa6b233e0, envp: 7fffa6b233f8)
	      echo-125     [000] .....    65.813702: sys_execve(filename:
  7fffa6b23378, argv: 7fffa6b233a0, envp: 7fffa6b233b0)
	      echo-125     [000] .....    65.822214: sys_execveat(fd: 0,
  filename: 1009ac48, argv: 7ffff65d0c98, envp: 7ffff65d0ca8, flags: 0)

After this patch:
  # tail /sys/kernel/debug/tracing/trace
	       cat-127     [000] .....   100.416262: sys_execve(filename:
  7fffa41b3448, argv: 7fffa41b33e0, envp: 7fffa41b33f8)
	       cat-127     [000] .....   100.418203: sys_execve -> 0x0
	      echo-128     [000] .....   103.873968: sys_execve(filename:
  7fffa41b3378, argv: 7fffa41b33a0, envp: 7fffa41b33b0)
	      echo-128     [000] .....   103.875102: sys_execve -> 0x0
	      echo-128     [000] .....   103.882097: sys_execveat(fd: 0,
  filename: 1009ac48, argv: 7fffd10d2148, envp: 7fffd10d2158, flags: 0)
	      echo-128     [000] .....   103.883225: sys_execveat -> 0x0

Cc: stable@vger.kernel.org
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Sumit Dubey2 <Sumit.Dubey2@ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220609103328.41306-1-naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc: define get_cycles macro for arch-override 2022-06-25T09:45:13+00:00 Jason A. Donenfeld Jason@zx2c4.com 2022-04-23T19:11:41+00:00 0cf45867fa6c6accb9c49803b65192c3a50d265f commit 408835832158df0357e18e96da7f2d1ed6b80e7f upstream. PowerPC defines a get_cycles() function, but it does not do the usual `#define get_cycles get_cycles` dance, making it impossible for generic code to see if an arch-specific function was defined. While the get_cycles() ifdef is not currently used, the following timekeeping patch in this series will depend on the macro existing (or not existing) when defining random_get_entropy(). Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@ozlabs.org> Cc: Paul Mackerras <paulus@samba.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 408835832158df0357e18e96da7f2d1ed6b80e7f upstream.

PowerPC defines a get_cycles() function, but it does not do the usual
`#define get_cycles get_cycles` dance, making it impossible for generic
code to see if an arch-specific function was defined. While the
get_cycles() ifdef is not currently used, the following timekeeping
patch in this series will depend on the macro existing (or not existing)
when defining random_get_entropy().

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@ozlabs.org>
Cc: Paul Mackerras <paulus@samba.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc: Use bool in archrandom.h 2022-06-25T09:45:03+00:00 Richard Henderson richard.henderson@linaro.org 2020-01-10T14:54:20+00:00 af98d2ae79f05a725bbd7a608eac4a4e1dbf8fb5 commit 98dcfce69729f9ce0fb14f96a39bbdba21429597 upstream. The generic interface uses bool not int; match that. Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20200110145422.49141-9-broonie@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 98dcfce69729f9ce0fb14f96a39bbdba21429597 upstream.

The generic interface uses bool not int; match that.

Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200110145422.49141-9-broonie@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc: Remove arch_has_random, arch_has_random_seed 2022-06-25T09:45:03+00:00 Richard Henderson richard.henderson@linaro.org 2020-01-10T14:54:14+00:00 3e5c6758b3017ea98c7494a472482d340193d5d1 commit cbac004995a0ce8453bdc555fab579e2bdb842a6 upstream. These symbols are currently part of the generic archrandom.h interface, but are currently unused and can be removed. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20200110145422.49141-3-broonie@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit cbac004995a0ce8453bdc555fab579e2bdb842a6 upstream.

These symbols are currently part of the generic archrandom.h
interface, but are currently unused and can be removed.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200110145422.49141-3-broonie@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc/32: Fix overread/overwrite of thread_struct via ptrace 2022-06-14T14:52:41+00:00 Michael Ellerman mpe@ellerman.id.au 2022-06-06T14:34:56+00:00 89dda10b73b7ce184caf18754907126ce7ce3fad commit 8e1278444446fc97778a5e5c99bca1ce0bbc5ec9 upstream. The ptrace PEEKUSR/POKEUSR (aka PEEKUSER/POKEUSER) API allows a process to read/write registers of another process. To get/set a register, the API takes an index into an imaginary address space called the "USER area", where the registers of the process are laid out in some fashion. The kernel then maps that index to a particular register in its own data structures and gets/sets the value. The API only allows a single machine-word to be read/written at a time. So 4 bytes on 32-bit kernels and 8 bytes on 64-bit kernels. The way floating point registers (FPRs) are addressed is somewhat complicated, because double precision float values are 64-bit even on 32-bit CPUs. That means on 32-bit kernels each FPR occupies two word-sized locations in the USER area. On 64-bit kernels each FPR occupies one word-sized location in the USER area. Internally the kernel stores the FPRs in an array of u64s, or if VSX is enabled, an array of pairs of u64s where one half of each pair stores the FPR. Which half of the pair stores the FPR depends on the kernel's endianness. To handle the different layouts of the FPRs depending on VSX/no-VSX and big/little endian, the TS_FPR() macro was introduced. Unfortunately the TS_FPR() macro does not take into account the fact that the addressing of each FPR differs between 32-bit and 64-bit kernels. It just takes the index into the "USER area" passed from userspace and indexes into the fp_state.fpr array. On 32-bit there are 64 indexes that address FPRs, but only 32 entries in the fp_state.fpr array, meaning the user can read/write 256 bytes past the end of the array. Because the fp_state sits in the middle of the thread_struct there are various fields than can be overwritten, including some pointers. As such it may be exploitable. It has also been observed to cause systems to hang or otherwise misbehave when using gdbserver, and is probably the root cause of this report which could not be easily reproduced: https://lore.kernel.org/linuxppc-dev/dc38afe9-6b78-f3f5-666b-986939e40fc6@keymile.com/ Rather than trying to make the TS_FPR() macro even more complicated to fix the bug, or add more macros, instead add a special-case for 32-bit kernels. This is more obvious and hopefully avoids a similar bug happening again in future. Note that because 32-bit kernels never have VSX enabled the code doesn't need to consider TS_FPRWIDTH/OFFSET at all. Add a BUILD_BUG_ON() to ensure that 32-bit && VSX is never enabled. Fixes: 87fec0514f61 ("powerpc: PTRACE_PEEKUSR/PTRACE_POKEUSER of FPR registers in little endian builds") Cc: stable@vger.kernel.org # v3.13+ Reported-by: Ariel Miculas <ariel.miculas@belden.com> Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220609133245.573565-1-mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8e1278444446fc97778a5e5c99bca1ce0bbc5ec9 upstream.

The ptrace PEEKUSR/POKEUSR (aka PEEKUSER/POKEUSER) API allows a process
to read/write registers of another process.

To get/set a register, the API takes an index into an imaginary address
space called the "USER area", where the registers of the process are
laid out in some fashion.

The kernel then maps that index to a particular register in its own data
structures and gets/sets the value.

The API only allows a single machine-word to be read/written at a time.
So 4 bytes on 32-bit kernels and 8 bytes on 64-bit kernels.

The way floating point registers (FPRs) are addressed is somewhat
complicated, because double precision float values are 64-bit even on
32-bit CPUs. That means on 32-bit kernels each FPR occupies two
word-sized locations in the USER area. On 64-bit kernels each FPR
occupies one word-sized location in the USER area.

Internally the kernel stores the FPRs in an array of u64s, or if VSX is
enabled, an array of pairs of u64s where one half of each pair stores
the FPR. Which half of the pair stores the FPR depends on the kernel's
endianness.

To handle the different layouts of the FPRs depending on VSX/no-VSX and
big/little endian, the TS_FPR() macro was introduced.

Unfortunately the TS_FPR() macro does not take into account the fact
that the addressing of each FPR differs between 32-bit and 64-bit
kernels. It just takes the index into the "USER area" passed from
userspace and indexes into the fp_state.fpr array.

On 32-bit there are 64 indexes that address FPRs, but only 32 entries in
the fp_state.fpr array, meaning the user can read/write 256 bytes past
the end of the array. Because the fp_state sits in the middle of the
thread_struct there are various fields than can be overwritten,
including some pointers. As such it may be exploitable.

It has also been observed to cause systems to hang or otherwise
misbehave when using gdbserver, and is probably the root cause of this
report which could not be easily reproduced:
  https://lore.kernel.org/linuxppc-dev/dc38afe9-6b78-f3f5-666b-986939e40fc6@keymile.com/

Rather than trying to make the TS_FPR() macro even more complicated to
fix the bug, or add more macros, instead add a special-case for 32-bit
kernels. This is more obvious and hopefully avoids a similar bug
happening again in future.

Note that because 32-bit kernels never have VSX enabled the code doesn't
need to consider TS_FPRWIDTH/OFFSET at all. Add a BUILD_BUG_ON() to
ensure that 32-bit && VSX is never enabled.

Fixes: 87fec0514f61 ("powerpc: PTRACE_PEEKUSR/PTRACE_POKEUSER of FPR registers in little endian builds")
Cc: stable@vger.kernel.org # v3.13+
Reported-by: Ariel Miculas <ariel.miculas@belden.com>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220609133245.573565-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc/4xx/cpm: Fix return value of __setup() handler 2022-06-14T14:52:33+00:00 Randy Dunlap rdunlap@infradead.org 2022-05-02T19:29:41+00:00 8224b8f30eddaa64f61fb9c16a61c8bf0aae0e53 [ Upstream commit 5bb99fd4090fe1acfdb90a97993fcda7f8f5a3d6 ] __setup() handlers should return 1 to obsolete_checksetup() in init/main.c to indicate that the boot option has been handled. A return of 0 causes the boot option/value to be listed as an Unknown kernel parameter and added to init's (limited) argument or environment strings. Also, error return codes don't mean anything to obsolete_checksetup() -- only non-zero (usually 1) or zero. So return 1 from cpm_powersave_off(). Fixes: d164f6d4f910 ("powerpc/4xx: Add suspend and idle support") Reported-by: Igor Zhbanov <izh1979@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220502192941.20955-1-rdunlap@infradead.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 5bb99fd4090fe1acfdb90a97993fcda7f8f5a3d6 ]

__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.

A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings.

Also, error return codes don't mean anything to obsolete_checksetup() --
only non-zero (usually 1) or zero. So return 1 from cpm_powersave_off().

Fixes: d164f6d4f910 ("powerpc/4xx: Add suspend and idle support")
Reported-by: Igor Zhbanov <izh1979@gmail.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220502192941.20955-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/idle: Fix return value of __setup() handler 2022-06-14T14:52:33+00:00 Randy Dunlap rdunlap@infradead.org 2022-05-02T19:29:25+00:00 847e0f9f2dd735726800100f521d2f69f8446c02 [ Upstream commit b793a01000122d2bd133ba451a76cc135b5e162c ] __setup() handlers should return 1 to obsolete_checksetup() in init/main.c to indicate that the boot option has been handled. A return of 0 causes the boot option/value to be listed as an Unknown kernel parameter and added to init's (limited) argument or environment strings. Also, error return codes don't mean anything to obsolete_checksetup() -- only non-zero (usually 1) or zero. So return 1 from powersave_off(). Fixes: 302eca184fb8 ("[POWERPC] cell: use ppc_md->power_save instead of cbe_idle_loop") Reported-by: Igor Zhbanov <izh1979@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220502192925.19954-1-rdunlap@infradead.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b793a01000122d2bd133ba451a76cc135b5e162c ]

__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.

A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings.

Also, error return codes don't mean anything to obsolete_checksetup() --
only non-zero (usually 1) or zero. So return 1 from powersave_off().

Fixes: 302eca184fb8 ("[POWERPC] cell: use ppc_md->power_save instead of cbe_idle_loop")
Reported-by: Igor Zhbanov <izh1979@gmail.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220502192925.19954-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/8xx: export 'cpm_setbrg' for modules 2022-06-14T14:52:33+00:00 Randy Dunlap rdunlap@infradead.org 2021-01-22T01:08:19+00:00 2c7f4549265e4a0722516219f6ada2fbd7a88913 [ Upstream commit 22f8e625ebabd7ed3185b82b44b4f12fc0402113 ] Fix missing export for a loadable module build: ERROR: modpost: "cpm_setbrg" [drivers/tty/serial/cpm_uart/cpm_uart.ko] undefined! Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> [chleroy: Changed Fixes: tag] Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210122010819.30986-1-rdunlap@infradead.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 22f8e625ebabd7ed3185b82b44b4f12fc0402113 ]

Fix missing export for a loadable module build:

ERROR: modpost: "cpm_setbrg" [drivers/tty/serial/cpm_uart/cpm_uart.ko] undefined!

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
[chleroy: Changed Fixes: tag]
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210122010819.30986-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/xics: fix refcount leak in icp_opal_init() 2022-06-14T14:52:30+00:00 Lv Ruyi lv.ruyi@zte.com.cn 2022-04-02T01:34:19+00:00 977dbc81d0f866ef63b93c127b7404f07734b3cc [ Upstream commit 5dd9e27ea4a39f7edd4bf81e9e70208e7ac0b7c9 ] The of_find_compatible_node() function returns a node pointer with refcount incremented, use of_node_put() on it when done. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220402013419.2410298-1-lv.ruyi@zte.com.cn Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 5dd9e27ea4a39f7edd4bf81e9e70208e7ac0b7c9 ]

The of_find_compatible_node() function returns a node pointer with
refcount incremented, use of_node_put() on it when done.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220402013419.2410298-1-lv.ruyi@zte.com.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>