linux-stable.git/arch/powerpc, branch v3.7.3 Linux kernel stable tree KVM: PPC: 44x: fix DCR read/write 2013-01-17T16:46:47+00:00 Alexander Graf agraf@suse.de 2012-10-06T01:56:35+00:00 002f7ba84b349caf9e95591ed11c13d26d48e24f commit e43a028752fed049e4bd94ef895542f96d79fa74 upstream. When remembering the direction of a DCR transaction, we should write to the same variable that we interpret on later when doing vcpu_run again. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: CAI Qian <caiqian@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e43a028752fed049e4bd94ef895542f96d79fa74 upstream.

When remembering the direction of a DCR transaction, we should write
to the same variable that we interpret on later when doing vcpu_run
again.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: CAI Qian <caiqian@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KVM: PPC: e500: fix allocation size error on g2h_tlb1_map 2013-01-17T16:45:46+00:00 Scott Wood scottwood@freescale.com 2012-08-22T15:04:23+00:00 1280178d00bf09683fa47a94a98c16437c18edd7 commit e400e72f250d2567e89c9bafb47ab91e8d9a15a2 upstream. We were only allocating half the bytes we need, which was made more obvious by a recent fix to the memset in clear_tlb1_bitmap(). Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e400e72f250d2567e89c9bafb47ab91e8d9a15a2 upstream.

We were only allocating half the bytes we need, which was made more
obvious by a recent fix to the memset in  clear_tlb1_bitmap().

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc: Add missing NULL terminator to avoid boot panic on PPC40x 2013-01-17T16:45:45+00:00 Gabor Juhos juhosg@openwrt.org 2012-12-20T03:44:28+00:00 8e290e6ceafb54d615f4c18e4a163eba9d684eed commit e6449c9b2d90c1bd9a5985bf05ddebfd1631cd6b upstream. The missing NULL terminator can cause a panic on PPC405 boards during boot: Linux/PowerPC load: console=ttyS0,115200 root=/dev/mtdblock1 rootfstype=squashfs,jffs2 noinitrd init=/etc/preinit Finalizing device tree... flat tree at 0x6a5160 bootconsole [udbg0] enabled Page fault in user mode with in_atomic() = 1 mm = (null) NIP = c0275f50 MSR = fffffffe Oops: Weird page fault, sig: 11 [#1] PowerPC 40x Platform Modules linked in: NIP: c0275f50 LR: c0275f60 CTR: c0280000 REGS: c0275eb0 TRAP: 636f7265 Not tainted (3.7.1) MSR: fffffffe <VEC,VSX,EE,PR,FP,ME,SE,BE,IR,DR,PMM,RI> CR: c06a6190 XER: 00000001 TASK = c02662a8[0] 'swapper' THREAD: c0274000 GPR00: c0275ec0 c000c658 c027c4bf 00000000 c0275ee0 c000a0ec c020a1a8 c020a1f0 GPR08: c020f631 c020f404 c025f078 c025f080 c0275f10 Call Trace: ---[ end trace 31fd0ba7d8756001 ]--- Kernel panic - not syncing: Attempted to kill the idle task! The panic happens since commit 9597abe00c1bab2aedce6b49866bf6d1e81c9eed (sections: fix section conflicts in arch/powerpc), however the root cause of this is that the NULL terminator were not added in commit a4f740cf33f7f6c164bbde3c0cdbcc77b0c4997c (of/flattree: Add of_flat_dt_match() helper function). Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e6449c9b2d90c1bd9a5985bf05ddebfd1631cd6b upstream.

The missing NULL terminator can cause a panic on
PPC405 boards during boot:

  Linux/PowerPC load: console=ttyS0,115200 root=/dev/mtdblock1 rootfstype=squashfs,jffs2 noinitrd init=/etc/preinit
  Finalizing device tree... flat tree at 0x6a5160
  bootconsole [udbg0] enabled
  Page fault in user mode with in_atomic() = 1 mm = (null)
  NIP = c0275f50  MSR = fffffffe
  Oops: Weird page fault, sig: 11 [#1]
  PowerPC 40x Platform
  Modules linked in:
  NIP: c0275f50 LR: c0275f60 CTR: c0280000
  REGS: c0275eb0 TRAP: 636f7265   Not tainted  (3.7.1)
  MSR: fffffffe <VEC,VSX,EE,PR,FP,ME,SE,BE,IR,DR,PMM,RI> CR: c06a6190  XER: 00000001
  TASK = c02662a8[0] 'swapper' THREAD: c0274000
  GPR00: c0275ec0 c000c658 c027c4bf 00000000 c0275ee0 c000a0ec c020a1a8 c020a1f0
  GPR08: c020f631 c020f404 c025f078 c025f080 c0275f10
   Call Trace:
   ---[ end trace 31fd0ba7d8756001 ]---

  Kernel panic - not syncing: Attempted to kill the idle task!

The panic happens since commit 9597abe00c1bab2aedce6b49866bf6d1e81c9eed
(sections: fix section conflicts in arch/powerpc), however the root
cause of this is that the NULL terminator were not added in commit
a4f740cf33f7f6c164bbde3c0cdbcc77b0c4997c (of/flattree: Add of_flat_dt_match()
helper function).

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc/vdso: Remove redundant locking in update_vsyscall_tz() 2013-01-17T16:45:45+00:00 Shan Hai shan.hai@windriver.com 2012-11-08T15:57:49+00:00 02b2d18491edaaf1560030145ba40fbe3aad6e5e commit ce73ec6db47af84d1466402781ae0872a9e7873c upstream. The locking in update_vsyscall_tz() is not only unnecessary because the vdso code copies the data unproteced in __kernel_gettimeofday() but also introduces a hard to reproduce race condition between update_vsyscall() and update_vsyscall_tz(), which causes user space process to loop forever in vdso code. The following patch removes the locking from update_vsyscall_tz(). Locking is not only unnecessary because the vdso code copies the data unprotected in __kernel_gettimeofday() but also erroneous because updating the tb_update_count is not atomic and introduces a hard to reproduce race condition between update_vsyscall() and update_vsyscall_tz(), which further causes user space process to loop forever in vdso code. The below scenario describes the race condition, x==0 Boot CPU other CPU proc_P: x==0 timer interrupt update_vsyscall x==1 x++;sync settimeofday update_vsyscall_tz x==2 x++;sync x==3 sync;x++ sync;x++ proc_P: x==3 (loops until x becomes even) Because the ++ operator would be implemented as three instructions and not atomic on powerpc. A similar change was made for x86 in commit 6c260d58634 ("x86: vdso: Remove bogus locking in update_vsyscall_tz") Signed-off-by: Shan Hai <shan.hai@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ce73ec6db47af84d1466402781ae0872a9e7873c upstream.

The locking in update_vsyscall_tz() is not only unnecessary because the vdso
code copies the data unproteced in __kernel_gettimeofday() but also
introduces a hard to reproduce race condition between update_vsyscall()
and update_vsyscall_tz(), which causes user space process to loop
forever in vdso code.

The following patch removes the locking from update_vsyscall_tz().

Locking is not only unnecessary because the vdso code copies the data
unprotected in __kernel_gettimeofday() but also erroneous because updating
the tb_update_count is not atomic and introduces a hard to reproduce race
condition between update_vsyscall() and update_vsyscall_tz(), which further
causes user space process to loop forever in vdso code.

The below scenario describes the race condition,
x==0	Boot CPU			other CPU
	proc_P: x==0
	    timer interrupt
		update_vsyscall
x==1		    x++;sync		settimeofday
					    update_vsyscall_tz
x==2						x++;sync
x==3		    sync;x++
						sync;x++
	proc_P: x==3 (loops until x becomes even)

Because the ++ operator would be implemented as three instructions and not
atomic on powerpc.

A similar change was made for x86 in commit 6c260d58634
("x86: vdso: Remove bogus locking in update_vsyscall_tz")

Signed-off-by: Shan Hai <shan.hai@windriver.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc: Fix CONFIG_RELOCATABLE=y CONFIG_CRASH_DUMP=n build 2013-01-17T16:45:45+00:00 Anton Blanchard anton@samba.org 2012-11-11T19:01:05+00:00 b0edb762d994e75e4fc99629633d34fa20833034 commit 11ee7e99f35ecb15f59b21da6a82d96d2cd3fcc8 upstream. If we build a kernel with CONFIG_RELOCATABLE=y CONFIG_CRASH_DUMP=n, the kernel fails when we run at a non zero offset. It turns out we were incorrectly wrapping some of the relocatable kernel code with CONFIG_CRASH_DUMP. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 11ee7e99f35ecb15f59b21da6a82d96d2cd3fcc8 upstream.

If we build a kernel with CONFIG_RELOCATABLE=y CONFIG_CRASH_DUMP=n,
the kernel fails when we run at a non zero offset. It turns out
we were incorrectly wrapping some of the relocatable kernel code
with CONFIG_CRASH_DUMP.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc/eeh: Do not invalidate PE properly 2012-11-25T22:14:16+00:00 Gavin Shan shangw@linux.vnet.ibm.com 2012-11-22T21:58:26+00:00 e716e014384688d1a50d1aa5213ee74748c6d4e0 While the EEH does recovery on the specific PE that has PCI errors, the PCI devices belonging to the PE will be removed and the PE will be marked as invalid since we still need the information stored in the PE. We only invalidate the PE when it doesn't have associated EEH devices and valid child PEs. However, the code used to check that is wrong. The patch fixes that. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 
While the EEH does recovery on the specific PE that has PCI errors,
the PCI devices belonging to the PE will be removed and the PE will
be marked as invalid since we still need the information stored in
the PE. We only invalidate the PE when it doesn't have associated
EEH devices and valid child PEs. However, the code used to check
that is wrong. The patch fixes that.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
powerpc/pseries: Fix oops with MSIs when missing EEH PEs 2012-11-23T02:26:05+00:00 Alexey Kardashevskiy aik@ozlabs.ru 2012-11-23T02:25:39+00:00 bb4618823a3389086f157fafb2a0d97cade8d89f The new EEH code introduced a small regression, if the EEH PEs are missin (which happens currently in qemu for example), it will deref a NULL pointer in the MSI code. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 
The new EEH code introduced a small regression, if the EEH PEs
are missin (which happens currently in qemu for example), it
will deref a NULL pointer in the MSI code.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
powerpc/mpc5200: move lpbfifo node and fix its interrupt property 2012-10-25T20:05:47+00:00 Anatolij Gustschin agust@denx.de 2012-10-05T10:23:10+00:00 7dfb736ec9917883fc9cfe6d0081987b8b110afe The LPB FIFO interrupt is a peripheral interrupt, thus its L1 cell has to be 2 instead of 3. Fix it and while at it, move the lpbfifo node to the common dtsi file. This patch fixes the irqdomain warning: ... WARNING: at kernel/irq/irqdomain.c:766 Modules linked in: NIP: c00587fc LR: c0058e0c CTR: c0014e54 REGS: c7837c10 TRAP: 0700 Tainted: G W (3.7.0-rc1-00003-g6e51414) MSR: 00029032 <EE,ME,IR,DR,RI> CR: 82cd8322 XER: 00000000 TASK = c7834000[1] 'swapper' THREAD: c7836000 GPR00: 00000001 c7837cc0 c7834000 c7806080 000000d7 c7837d20 00000003 c7837cec GPR08: c7837ce8 00000000 00000000 00000008 82cd3342 00000000 c0003f88 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 c7850ec0 GPR24: c782b010 00000000 00000001 c7852900 00000003 c7df5be0 c7806080 000000d7 NIP [c00587fc] irq_linear_revmap+0x2c/0x4c LR [c0058e0c] irq_create_mapping+0x28/0x124 Reported-by: Stefan Roese <sr@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> 
The LPB FIFO interrupt is a peripheral interrupt, thus its L1 cell
has to be 2 instead of 3. Fix it and while at it, move the lpbfifo
node to the common dtsi file.

This patch fixes the irqdomain warning:
 ...
 WARNING: at kernel/irq/irqdomain.c:766
 Modules linked in:
 NIP: c00587fc LR: c0058e0c CTR: c0014e54
 REGS: c7837c10 TRAP: 0700   Tainted: G        W     (3.7.0-rc1-00003-g6e51414)
 MSR: 00029032 <EE,ME,IR,DR,RI>  CR: 82cd8322  XER: 00000000
 TASK = c7834000[1] 'swapper' THREAD: c7836000
 GPR00: 00000001 c7837cc0 c7834000 c7806080 000000d7 c7837d20 00000003 c7837cec
 GPR08: c7837ce8 00000000 00000000 00000008 82cd3342 00000000 c0003f88 00000000
 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 c7850ec0
 GPR24: c782b010 00000000 00000001 c7852900 00000003 c7df5be0 c7806080 000000d7
 NIP [c00587fc] irq_linear_revmap+0x2c/0x4c
 LR [c0058e0c] irq_create_mapping+0x28/0x124

Reported-by: Stefan Roese <sr@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
powerpc: 52xx: nop out unsupported critical IRQs 2012-10-25T20:05:32+00:00 Wolfram Sang w.sang@pengutronix.de 2012-10-10T23:19:15+00:00 e34298c9a29a4b5bdcbb9a8994cc61f6ba506a94 Currently, when booting MPC52xx based platforms, we get: mpc52xx_irqhost_map: invalid irq: virq=16, l1=0, l2=3 irq: irq-16==>hwirq-0x3 mapping failed: -22 [WARNing skipped] The warning is wrong since the mapping itself is valid. However, there is no support for that type of IRQ currently. Print a proper warning and bind the irq to a no_irq chip. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: John Bonesio <bones@secretlab.ca> Cc: Anatolij Gustschin <agust@denx.de> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Anatolij Gustschin <agust@denx.de> 
Currently, when booting MPC52xx based platforms, we get:

        mpc52xx_irqhost_map: invalid irq: virq=16, l1=0, l2=3
        irq: irq-16==>hwirq-0x3 mapping failed: -22
        [WARNing skipped]

The warning is wrong since the mapping itself is valid. However, there is no
support for that type of IRQ currently. Print a proper warning and bind the irq
to a no_irq chip.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: John Bonesio <bones@secretlab.ca>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
powerpc/pcm030: add pcm030-audio-fabric to dts 2012-10-25T20:04:51+00:00 Eric Millbrandt emillbrandt@dekaresearch.com 2012-09-24T12:16:47+00:00 f4221a7a63abd1b6e358d19fe4d05e4d2e44e11a Add a node for the pcm030-audio-fabric ASoC driver Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> 
Add a node for the pcm030-audio-fabric ASoC driver

Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>