linux-stable.git/arch/powerpc, branch v3.2.88

powerpc: Ignore reserved field in DCSR and PVR reads and writes

2017-03-16T02:18:45+00:00

commit 178f358208ceb8b38e5cff3f815e0db4a6a70a07 upstream.

IBM bit 31 (for the rest of us - bit 0) is a reserved field in the
instruction definition of mtspr and mfspr. Hardware is encouraged to
(and does) ignore it.

As a result, if userspace executes an mtspr DSCR with the reserved bit
set, we get a DSCR facility unavailable exception. The kernel fails to
match against the expected value/mask, and we silently return to
userspace to try and re-execute the same mtspr DSCR instruction. We
loop forever until the process is killed.

We should do something here, and it seems mirroring what hardware does
is the better option vs killing the process. While here, relax the
matching of mfspr PVR too.

Signed-off-by: Anton Blanchard 
Signed-off-by: Michael Ellerman 
[bwh: Backported to 3.2: drop changes to PPC_INST_M{F,T}SPR_DSCR_USER_MASK]
Signed-off-by: Ben Hutchings

powerpc/ptrace: Preserve previous fprs/vsrs on short regset write

2017-03-16T02:18:45+00:00

commit 99dfe80a2a246c600440a815741fd2e74a8b4977 upstream.

Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET
to fill all the registers, the thread's old registers are preserved.

Fixes: c6e6771b87d4 ("powerpc: Introduce VSX thread_struct and CONFIG_VSX")
Signed-off-by: Dave Martin 
Signed-off-by: Michael Ellerman 
[bwh: Backported to 3.2:
 - fpscr and fpr are direct members of struct thread_struct
 - Use memcpy() for fpscr, like the reverse copy below, to avoid type error
 - Adjust context]
Signed-off-by: Ben Hutchings

powerpc/ps3: Fix system hang with GCC 5 builds

2017-03-16T02:18:29+00:00

commit 6dff5b67054e17c91bd630bcdda17cfca5aa4215 upstream.

GCC 5 generates different code for this bootwrapper null check that
causes the PS3 to hang very early in its bootup. This check is of
limited value, so just get rid of it.

Signed-off-by: Geoff Levand 
Signed-off-by: Michael Ellerman 
Signed-off-by: Ben Hutchings

powerpc/ibmebus: Fix further device reference leaks

2017-03-16T02:18:25+00:00

commit 815a7141c4d1b11610dccb7fcbb38633759824f2 upstream.

Make sure to drop any reference taken by bus_find_device() when creating
devices during init and driver registration.

Fixes: 55347cc9962f ("[POWERPC] ibmebus: Add device creation and bus probing based on of_device")
Signed-off-by: Johan Hovold 
Signed-off-by: Michael Ellerman 
Signed-off-by: Ben Hutchings

powerpc/ibmebus: Fix device reference leaks in sysfs interface

2017-03-16T02:18:25+00:00

commit fe0f3168169f7c34c29b0cf0c489f126a7f29643 upstream.

Make sure to drop any reference taken by bus_find_device() in the sysfs
callbacks that are used to create and destroy devices based on
device-tree entries.

Fixes: 6bccf755ff53 ("[POWERPC] ibmebus: dynamic addition/removal of adapters, some code cleanup")
Signed-off-by: Johan Hovold 
Signed-off-by: Michael Ellerman 
Signed-off-by: Ben Hutchings

powerpc: Convert cmp to cmpd in idle enter sequence

2017-02-23T03:50:54+00:00

commit 80f23935cadb1c654e81951f5a8b7ceae0acc1b4 upstream.

PowerPC's "cmp" instruction has four operands. Normally people write
"cmpw" or "cmpd" for the second cmp operand 0 or 1. But, frequently
people forget, and write "cmp" with just three operands.

With older binutils this is silently accepted as if this was "cmpw",
while often "cmpd" is wanted. With newer binutils GAS will complain
about this for 64-bit code. For 32-bit code it still silently assumes
"cmpw" is what is meant.

In this instance the code comes directly from ISA v2.07, including the
cmp, but cmpd is correct. Backport to stable so that new toolchains can
build old kernels.

Fixes: 948cf67c4726 ("powerpc: Add NAP mode support on Power7 in HV mode")
Reviewed-by: Vaidyanathan Srinivasan 
Signed-off-by: Segher Boessenkool 
Signed-off-by: Michael Ellerman 
[bwh: Backported to 3.2: adjust filename, context]
Signed-off-by: Ben Hutchings

powerpc/64: Fix incorrect return value from __copy_tofrom_user

2017-02-23T03:50:53+00:00

commit 1a34439e5a0b2235e43f96816dbb15ee1154f656 upstream.

Debugging a data corruption issue with virtio-net/vhost-net led to
the observation that __copy_tofrom_user was occasionally returning
a value 16 larger than it should.  Since the return value from
__copy_tofrom_user is the number of bytes not copied, this means
that __copy_tofrom_user can occasionally return a value larger
than the number of bytes it was asked to copy.  In turn this can
cause higher-level copy functions such as copy_page_to_iter_iovec
to corrupt memory by copying data into the wrong memory locations.

It turns out that the failing case involves a fault on the store
at label 79, and at that point the first unmodified byte of the
destination is at R3 + 16.  Consequently the exception handler
for that store needs to add 16 to R3 before using it to work out
how many bytes were not copied, but in this one case it was not
adding the offset to R3.  To fix it, this moves the label 179 to
the point where we add 16 to R3.  I have checked manually all the
exception handlers for the loads and stores in this code and the
rest of them are correct (it would be excellent to have an
automated test of all the exception cases).

This bug has been present since this code was initially
committed in May 2002 to Linux version 2.5.20.

Signed-off-by: Paul Mackerras 
Signed-off-by: Michael Ellerman 
Signed-off-by: Ben Hutchings

powerpc/vdso64: Use double word compare on pointers

2017-02-23T03:50:51+00:00

commit 5045ea37377ce8cca6890d32b127ad6770e6dce5 upstream.

__kernel_get_syscall_map() and __kernel_clock_getres() use cmpli to
check if the passed in pointer is non zero. cmpli maps to a 32 bit
compare on binutils, so we ignore the top 32 bits.

A simple test case can be created by passing in a bogus pointer with
the bottom 32 bits clear. Using a clk_id that is handled by the VDSO,
then one that is handled by the kernel shows the problem:

  printf("%d\n", clock_getres(CLOCK_REALTIME, (void *)0x100000000));
  printf("%d\n", clock_getres(CLOCK_BOOTTIME, (void *)0x100000000));

And we get:

  0
  -1

The bigger issue is if we pass a valid pointer with the bottom 32 bits
clear, in this case we will return success but won't write any data
to the pointer.

I stumbled across this issue because the LLVM integrated assembler
doesn't accept cmpli with 3 arguments. Fix this by converting them to
cmpldi.

Fixes: a7f290dad32e ("[PATCH] powerpc: Merge vdso's and add vdso support to 32 bits kernel")
Signed-off-by: Anton Blanchard 
Signed-off-by: Michael Ellerman 
Signed-off-by: Ben Hutchings

powerpc/nvram: Fix an incorrect partition merge

2017-02-23T03:50:50+00:00

commit 11b7e154b132232535befe51c55db048069c8461 upstream.

When we merge two contiguous partitions whose signatures are marked
NVRAM_SIG_FREE, We need update prev's length and checksum, then write it
to nvram, not cur's. So lets fix this mistake now.

Also use memset instead of strncpy to set the partition's name. It's
more readable if we want to fill up with duplicate chars .

Fixes: fa2b4e54d41f ("powerpc/nvram: Improve partition removal")
Signed-off-by: Pan Xinhui 
Signed-off-by: Michael Ellerman 
Signed-off-by: Ben Hutchings

ppc32: fix copy_from_user()

2016-11-20T01:01:39+00:00

commit 224264657b8b228f949b42346e09ed8c90136a8e upstream.

should clear on access_ok() failures.  Also remove the useless
range truncation logics.

Signed-off-by: Al Viro 
[bwh: Backported to 3.2: no calls to check_object_size()]
Signed-off-by: Ben Hutchings