linux-stable.git/arch/powerpc, branch v3.2.45 Linux kernel stable tree powerpc: fix numa distance for form0 device tree 2013-05-13T14:02:44+00:00 Vaidyanathan Srinivasan svaidy@linux.vnet.ibm.com 2013-03-22T05:49:35+00:00 3abcaf2c9af435252f64c9b5512d38c89731a0b4 commit 7122beeee7bc1757682049780179d7c216dd1c83 upstream. The following commit breaks numa distance setup for old powerpc systems that use form0 encoding in device tree. commit 41eab6f88f24124df89e38067b3766b7bef06ddb powerpc/numa: Use form 1 affinity to setup node distance Device tree node /rtas/ibm,associativity-reference-points would index into /cpus/PowerPCxxxx/ibm,associativity based on form0 or form1 encoding detected by ibm,architecture-vec-5 property. All modern systems use form1 and current kernel code is correct. However, on older systems with form0 encoding, the numa distance will get hard coded as LOCAL_DISTANCE for all nodes. This causes task scheduling anomaly since scheduler will skip building numa level domain (topmost domain with all cpus) if all numa distances are same. (value of 'level' in sched_init_numa() will remain 0) Prior to the above commit: ((from) == (to) ? LOCAL_DISTANCE : REMOTE_DISTANCE) Restoring compatible behavior with this patch for old powerpc systems with device tree where numa distance are encoded as form0. Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 7122beeee7bc1757682049780179d7c216dd1c83 upstream.

The following commit breaks numa distance setup for old powerpc
systems that use form0 encoding in device tree.

commit 41eab6f88f24124df89e38067b3766b7bef06ddb
powerpc/numa: Use form 1 affinity to setup node distance

Device tree node /rtas/ibm,associativity-reference-points would
index into /cpus/PowerPCxxxx/ibm,associativity based on form0 or
form1 encoding detected by ibm,architecture-vec-5 property.

All modern systems use form1 and current kernel code is correct.
However, on older systems with form0 encoding, the numa distance
will get hard coded as LOCAL_DISTANCE for all nodes.  This causes
task scheduling anomaly since scheduler will skip building numa
level domain (topmost domain with all cpus) if all numa distances
are same.  (value of 'level' in sched_init_numa() will remain 0)

Prior to the above commit:
((from) == (to) ? LOCAL_DISTANCE : REMOTE_DISTANCE)

Restoring compatible behavior with this patch for old powerpc systems
with device tree where numa distance are encoded as form0.

Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
powerpc: Add isync to copy_and_flush 2013-05-13T14:02:27+00:00 Michael Neuling michael.neuling@au1.ibm.com 2013-04-24T00:30:09+00:00 075d7822cf0b70d6e8e1d736ebc49f6df924d6cc commit 29ce3c5073057991217916abc25628e906911757 upstream. In __after_prom_start we copy the kernel down to zero in two calls to copy_and_flush. After the first call (copy from 0 to copy_to_here:) we jump to the newly copied code soon after. Unfortunately there's no isync between the copy of this code and the jump to it. Hence it's possible that stale instructions could still be in the icache or pipeline before we branch to it. We've seen this on real machines and it's results in no console output after: calling quiesce... returning from prom_init The below adds an isync to ensure that the copy and flushing has completed before any branching to the new instructions occurs. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 29ce3c5073057991217916abc25628e906911757 upstream.

In __after_prom_start we copy the kernel down to zero in two calls to
copy_and_flush.  After the first call (copy from 0 to copy_to_here:)
we jump to the newly copied code soon after.

Unfortunately there's no isync between the copy of this code and the
jump to it.  Hence it's possible that stale instructions could still be
in the icache or pipeline before we branch to it.

We've seen this on real machines and it's results in no console output
after:
  calling quiesce...
  returning from prom_init

The below adds an isync to ensure that the copy and flushing has
completed before any branching to the new instructions occurs.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
powerpc/spufs: Initialise inode->i_ino in spufs_new_inode() 2013-05-13T14:02:25+00:00 Michael Ellerman michael@ellerman.id.au 2013-04-23T15:13:14+00:00 19e7fbbc440d0f29605e74252b42f2428434200c commit 6747e83235caecd30b186d1282e4eba7679f81b7 upstream. In commit 85fe402 (fs: do not assign default i_ino in new_inode), the initialisation of i_ino was removed from new_inode() and pushed down into the callers. However spufs_new_inode() was not updated. This exhibits as no files appearing in /spu, because all our dirents have a zero inode, which readdir() seems to dislike. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 6747e83235caecd30b186d1282e4eba7679f81b7 upstream.

In commit 85fe402 (fs: do not assign default i_ino in new_inode), the
initialisation of i_ino was removed from new_inode() and pushed down
into the callers. However spufs_new_inode() was not updated.

This exhibits as no files appearing in /spu, because all our dirents
have a zero inode, which readdir() seems to dislike.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
powerpc: pSeries_lpar_hpte_remove fails from Adjunct partition being performed before the ANDCOND test 2013-04-25T19:25:33+00:00 Michael Wolf mjw@linux.vnet.ibm.com 2013-04-05T10:41:40+00:00 2efb274027d68d56e21a8bc598c2a779148c8af6 commit 9fb2640159f9d4f5a2a9d60e490482d4cbecafdb upstream. Some versions of pHyp will perform the adjunct partition test before the ANDCOND test. The result of this is that H_RESOURCE can be returned and cause the BUG_ON condition to occur. The HPTE is not removed. So add a check for H_RESOURCE, it is ok if this HPTE is not removed as pSeries_lpar_hpte_remove is looking for an HPTE to remove and not a specific HPTE to remove. So it is ok to just move on to the next slot and try again. Signed-off-by: Michael Wolf <mjw@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 9fb2640159f9d4f5a2a9d60e490482d4cbecafdb upstream.

Some versions of pHyp will perform the adjunct partition test before the
ANDCOND test.  The result of this is that H_RESOURCE can be returned and
cause the BUG_ON condition to occur. The HPTE is not removed.  So add a
check for H_RESOURCE, it is ok if this HPTE is not removed as
pSeries_lpar_hpte_remove is looking for an HPTE to remove and not a
specific HPTE to remove.  So it is ok to just move on to the next slot
and try again.

Signed-off-by: Michael Wolf <mjw@linux.vnet.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
signal: Define __ARCH_HAS_SA_RESTORER so we know whether to clear sa_restorer 2013-03-27T02:41:25+00:00 Ben Hutchings ben@decadent.org.uk 2012-11-26T03:24:19+00:00 b170d21942749093f0dac17735837728372e8bff flush_signal_handlers() needs to know whether sigaction::sa_restorer is defined, not whether SA_RESTORER is defined. Define the __ARCH_HAS_SA_RESTORER macro to indicate this. Vaguely based on upstream commit 574c4866e33d 'consolidate kernel-side struct sigaction declarations'. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Al Viro <viro@zeniv.linux.org.uk> 
flush_signal_handlers() needs to know whether sigaction::sa_restorer
is defined, not whether SA_RESTORER is defined.  Define the
__ARCH_HAS_SA_RESTORER macro to indicate this.

Vaguely based on upstream commit 574c4866e33d 'consolidate kernel-side
struct sigaction declarations'.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
powerpc: Fix cputable entry for 970MP rev 1.0 2013-03-27T02:41:02+00:00 Benjamin Herrenschmidt benh@kernel.crashing.org 2013-03-12T22:55:02+00:00 037c144f928456efae95d57bc0530fa61d87987c commit d63ac5f6cf31c8a83170a9509b350c1489a7262b upstream. Commit 44ae3ab3358e962039c36ad4ae461ae9fb29596c forgot to update the entry for the 970MP rev 1.0 processor when moving some CPU features bits to the MMU feature bit mask. This breaks booting on some rare G5 models using that chip revision. Reported-by: Phileas Fogg <phileas-fogg@mail.ru> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit d63ac5f6cf31c8a83170a9509b350c1489a7262b upstream.

Commit 44ae3ab3358e962039c36ad4ae461ae9fb29596c forgot to update
the entry for the 970MP rev 1.0 processor when moving some CPU
features bits to the MMU feature bit mask. This breaks booting
on some rare G5 models using that chip revision.

Reported-by: Phileas Fogg <phileas-fogg@mail.ru>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Revert "powerpc/eeh: Fix crash when adding a device in a slot with DDW" 2013-03-20T15:03:15+00:00 Ben Hutchings ben@decadent.org.uk 2013-03-14T00:15:05+00:00 b9d85cc001a1ff099d4870dd36b474e522d543c5 This reverts commit 066f289835f09a3f744d6bac96f25e25d20b3ded which was 6a040ce72598159a74969a2d01ab0ba5ee6536b3 upstream. This was not needed and is not suitable for 3.2.y. Reported-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
This reverts commit 066f289835f09a3f744d6bac96f25e25d20b3ded which was
6a040ce72598159a74969a2d01ab0ba5ee6536b3 upstream.

This was not needed and is not suitable for 3.2.y.

Reported-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
powerpc/kexec: Disable hard IRQ before kexec 2013-03-06T03:24:11+00:00 Phileas Fogg phileas-fogg@mail.ru 2013-02-22T23:32:19+00:00 819a56e867d8e4ebe87060eaf576c0032a8963c2 commit 8520e443aa56cc157b015205ea53e7b9fc831291 upstream. Disable hard IRQ before kexec a new kernel image. Not doing it can result in corrupted data in the memory segments reserved for the new kernel. Signed-off-by: Phileas Fogg <phileas-fogg@mail.ru> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 8520e443aa56cc157b015205ea53e7b9fc831291 upstream.

Disable hard IRQ before kexec a new kernel image.
Not doing it can result in corrupted data in the memory segments
reserved for the new kernel.

Signed-off-by: Phileas Fogg <phileas-fogg@mail.ru>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
powerpc/eeh: Fix crash when adding a device in a slot with DDW 2013-03-06T03:22:36+00:00 Thadeu Lima de Souza Cascardo cascardo@linux.vnet.ibm.com 2012-12-28T09:13:19+00:00 066f289835f09a3f744d6bac96f25e25d20b3ded commit 6a040ce72598159a74969a2d01ab0ba5ee6536b3 upstream. The DDW code uses a eeh_dev struct from the pci_dev. However, this is not set until eeh_add_device_late is called. Since pci_bus_add_devices is called before eeh_add_device_late, the PCI devices are added to the bus, making drivers' probe hooks to be called. These will call set_dma_mask, which will call the DDW code, which will require the eeh_dev struct from pci_dev. This would result in a crash, due to a NULL dereference. Calling eeh_add_device_late after pci_bus_add_devices would make the system BUG, because device files shouldn't be added to devices there were not added to the system. So, a new function is needed to add such files only after pci_bus_add_devices have been called. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Acked-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 6a040ce72598159a74969a2d01ab0ba5ee6536b3 upstream.

The DDW code uses a eeh_dev struct from the pci_dev. However, this is
not set until eeh_add_device_late is called.

Since pci_bus_add_devices is called before eeh_add_device_late, the PCI
devices are added to the bus, making drivers' probe hooks to be called.
These will call set_dma_mask, which will call the DDW code, which will
require the eeh_dev struct from pci_dev. This would result in a crash,
due to a NULL dereference.

Calling eeh_add_device_late after pci_bus_add_devices would make the
system BUG, because device files shouldn't be added to devices there
were not added to the system. So, a new function is needed to add such
files only after pci_bus_add_devices have been called.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Acked-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
KVM: PPC: Emulate dcbf 2013-02-06T04:33:37+00:00 Alexander Graf agraf@suse.de 2013-01-17T12:50:25+00:00 1a14c25a0b523225ba47a983d094d1b253f2585a commit d3286144c92ec876da9e30320afa875699b7e0f1 upstream. Guests can trigger MMIO exits using dcbf. Since we don't emulate cache incoherent MMIO, just do nothing and move on. Reported-by: Ben Collins <ben.c@servergy.com> Signed-off-by: Alexander Graf <agraf@suse.de> Tested-by: Ben Collins <ben.c@servergy.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit d3286144c92ec876da9e30320afa875699b7e0f1 upstream.

Guests can trigger MMIO exits using dcbf. Since we don't emulate cache
incoherent MMIO, just do nothing and move on.

Reported-by: Ben Collins <ben.c@servergy.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Tested-by: Ben Collins <ben.c@servergy.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>