linux-stable.git/arch/powerpc, branch linux-6.10.y Linux kernel stable tree mm: z3fold: deprecate CONFIG_Z3FOLD 2024-10-10T10:01:09+00:00 Yosry Ahmed yosryahmed@google.com 2024-10-07T19:23:51+00:00 8a2f4f156ab4778677d06b0f2f71dbf82e1e7adf [ Upstream commit 7a2369b74abf76cd3e54c45b30f6addb497f831b ] The z3fold compressed pages allocator is rarely used, most users use zsmalloc. The only disadvantage of zsmalloc in comparison is the dependency on MMU, and zbud is a more common option for !MMU as it was the default zswap allocator for a long time. Historically, zsmalloc had worse latency than zbud and z3fold but offered better memory savings. This is no longer the case as shown by a simple recent analysis [1]. That analysis showed that z3fold does not have any advantage over zsmalloc or zbud considering both performance and memory usage. In a kernel build test on tmpfs in a limited cgroup, z3fold took 3% more time and used 1.8% more memory. The latency of zswap_load() was 7% higher, and that of zswap_store() was 10% higher. Zsmalloc is better in all metrics. Moreover, z3fold apparently has latent bugs, which was made noticeable by a recent soft lockup bug report with z3fold [2]. Switching to zsmalloc not only fixed the problem, but also reduced the swap usage from 6~8G to 1~2G. Other users have also reported being bitten by mistakenly enabling z3fold. Other than hurting users, z3fold is repeatedly causing wasted engineering effort. Apart from investigating the above bug, it came up in multiple development discussions (e.g. [3]) as something we need to handle, when there aren't any legit users (at least not intentionally). The natural course of action is to deprecate z3fold, and remove in a few cycles if no objections are raised from active users. Next on the list should be zbud, as it offers marginal latency gains at the cost of huge memory waste when compared to zsmalloc. That one will need to wait until zsmalloc does not depend on MMU. Rename the user-visible config option from CONFIG_Z3FOLD to CONFIG_Z3FOLD_DEPRECATED so that users with CONFIG_Z3FOLD=y get a new prompt with explanation during make oldconfig. Also, remove CONFIG_Z3FOLD=y from defconfigs. [1]https://lore.kernel.org/lkml/CAJD7tkbRF6od-2x_L8-A1QL3=2Ww13sCj4S3i4bNndqF+3+_Vg@mail.gmail.com/ [2]https://lore.kernel.org/lkml/EF0ABD3E-A239-4111-A8AB-5C442E759CF3@gmail.com/ [3]https://lore.kernel.org/lkml/CAJD7tkbnmeVugfunffSovJf9FAgy9rhBVt_tx=nxUveLUfqVsA@mail.gmail.com/ [arnd@arndb.de: deprecate ZSWAP_ZPOOL_DEFAULT_Z3FOLD as well] Link: https://lkml.kernel.org/r/20240909202625.1054880-1-arnd@kernel.org Link: https://lkml.kernel.org/r/20240904233343.933462-1-yosryahmed@google.com Signed-off-by: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Chris Down <chris@chrisdown.name> Acked-by: Nhat Pham <nphamcs@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vitaly Wool <vitaly.wool@konsulko.com> Acked-by: Christoph Hellwig <hch@lst.de> Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: WANG Xuerui <kernel@xen0n.name> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> (cherry picked from commit 7a2369b74abf76cd3e54c45b30f6addb497f831b) Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7a2369b74abf76cd3e54c45b30f6addb497f831b ]

The z3fold compressed pages allocator is rarely used, most users use
zsmalloc.  The only disadvantage of zsmalloc in comparison is the
dependency on MMU, and zbud is a more common option for !MMU as it was the
default zswap allocator for a long time.

Historically, zsmalloc had worse latency than zbud and z3fold but offered
better memory savings.  This is no longer the case as shown by a simple
recent analysis [1].  That analysis showed that z3fold does not have any
advantage over zsmalloc or zbud considering both performance and memory
usage.  In a kernel build test on tmpfs in a limited cgroup, z3fold took
3% more time and used 1.8% more memory.  The latency of zswap_load() was
7% higher, and that of zswap_store() was 10% higher.  Zsmalloc is better
in all metrics.

Moreover, z3fold apparently has latent bugs, which was made noticeable by
a recent soft lockup bug report with z3fold [2].  Switching to zsmalloc
not only fixed the problem, but also reduced the swap usage from 6~8G to
1~2G.  Other users have also reported being bitten by mistakenly enabling
z3fold.

Other than hurting users, z3fold is repeatedly causing wasted engineering
effort.  Apart from investigating the above bug, it came up in multiple
development discussions (e.g.  [3]) as something we need to handle, when
there aren't any legit users (at least not intentionally).

The natural course of action is to deprecate z3fold, and remove in a few
cycles if no objections are raised from active users.  Next on the list
should be zbud, as it offers marginal latency gains at the cost of huge
memory waste when compared to zsmalloc.  That one will need to wait until
zsmalloc does not depend on MMU.

Rename the user-visible config option from CONFIG_Z3FOLD to
CONFIG_Z3FOLD_DEPRECATED so that users with CONFIG_Z3FOLD=y get a new
prompt with explanation during make oldconfig.  Also, remove
CONFIG_Z3FOLD=y from defconfigs.

[1]https://lore.kernel.org/lkml/CAJD7tkbRF6od-2x_L8-A1QL3=2Ww13sCj4S3i4bNndqF+3+_Vg@mail.gmail.com/
[2]https://lore.kernel.org/lkml/EF0ABD3E-A239-4111-A8AB-5C442E759CF3@gmail.com/
[3]https://lore.kernel.org/lkml/CAJD7tkbnmeVugfunffSovJf9FAgy9rhBVt_tx=nxUveLUfqVsA@mail.gmail.com/

[arnd@arndb.de: deprecate ZSWAP_ZPOOL_DEFAULT_Z3FOLD as well]
  Link: https://lkml.kernel.org/r/20240909202625.1054880-1-arnd@kernel.org
Link: https://lkml.kernel.org/r/20240904233343.933462-1-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vitaly Wool <vitaly.wool@konsulko.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
(cherry picked from commit 7a2369b74abf76cd3e54c45b30f6addb497f831b)
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/vdso: Fix VDSO data access when running in a non-root time namespace 2024-10-10T10:00:44+00:00 Christophe Leroy christophe.leroy@csgroup.eu 2024-09-06T08:33:43+00:00 7270e5f957faa3e57878042984c1443486385c22 [ Upstream commit c73049389e58c01e2e3bbfae900c8daeee177191 ] When running in a non-root time namespace, the global VDSO data page is replaced by a dedicated namespace data page and the global data page is mapped next to it. Detailed explanations can be found at commit 660fd04f9317 ("lib/vdso: Prepare for time namespace support"). When it happens, __kernel_get_syscall_map and __kernel_get_tbfreq and __kernel_sync_dicache don't work anymore because they read 0 instead of the data they need. To address that, clock_mode has to be read. When it is set to VDSO_CLOCKMODE_TIMENS, it means it is a dedicated namespace data page and the global data is located on the following page. Add a macro called get_realdatapage which reads clock_mode and add PAGE_SIZE to the pointer provided by get_datapage macro when clock_mode is equal to VDSO_CLOCKMODE_TIMENS. Use this new macro instead of get_datapage macro except for time functions as they handle it internally. Fixes: 74205b3fc2ef ("powerpc/vdso: Add support for time namespaces") Reported-by: Jason A. Donenfeld <Jason@zx2c4.com> Closes: https://lore.kernel.org/all/ZtnYqZI-nrsNslwy@zx2c4.com/ Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c73049389e58c01e2e3bbfae900c8daeee177191 ]

When running in a non-root time namespace, the global VDSO data page
is replaced by a dedicated namespace data page and the global data
page is mapped next to it. Detailed explanations can be found at
commit 660fd04f9317 ("lib/vdso: Prepare for time namespace support").

When it happens, __kernel_get_syscall_map and __kernel_get_tbfreq
and __kernel_sync_dicache don't work anymore because they read 0
instead of the data they need.

To address that, clock_mode has to be read. When it is set to
VDSO_CLOCKMODE_TIMENS, it means it is a dedicated namespace data page
and the global data is located on the following page.

Add a macro called get_realdatapage which reads clock_mode and add
PAGE_SIZE to the pointer provided by get_datapage macro when
clock_mode is equal to VDSO_CLOCKMODE_TIMENS. Use this new macro
instead of get_datapage macro except for time functions as they handle
it internally.

Fixes: 74205b3fc2ef ("powerpc/vdso: Add support for time namespaces")
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Closes: https://lore.kernel.org/all/ZtnYqZI-nrsNslwy@zx2c4.com/
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/pseries: Use correct data types from pseries_hp_errorlog struct 2024-10-10T10:00:38+00:00 Haren Myneni haren@linux.ibm.com 2024-08-22T02:50:26+00:00 0c3f429d6dea6106bacb8e436233d48b16922c08 [ Upstream commit b76e0d4215b6b622127ebcceaa7f603313ceaec4 ] _be32 type is defined for some elements in pseries_hp_errorlog struct but also used them u32 after be32_to_cpu() conversion. Example: In handle_dlpar_errorlog() hp_elog->_drc_u.drc_index = be32_to_cpu(hp_elog->_drc_u.drc_index); And later assigned to u32 type dlpar_cpu() - u32 drc_index = hp_elog->_drc_u.drc_index; This incorrect usage is giving the following warnings and the patch resolve these warnings with the correct assignment. arch/powerpc/platforms/pseries/dlpar.c:398:53: sparse: sparse: incorrect type in argument 1 (different base types) @@ expected unsigned int [usertype] drc_index @@ got restricted __be32 [usertype] drc_index @@ ... arch/powerpc/platforms/pseries/dlpar.c:418:43: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __be32 [usertype] drc_count @@ got unsigned int [usertype] @@ Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202408182142.wuIKqYae-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202408182302.o7QRO45S-lkp@intel.com/ Signed-off-by: Haren Myneni <haren@linux.ibm.com> v3: - Fix warnings from using incorrect data types in pseries_hp_errorlog struct v2: - Remove pr_info() and TODO comments - Update more information in the commit logs Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240822025028.938332-1-haren@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b76e0d4215b6b622127ebcceaa7f603313ceaec4 ]

_be32 type is defined for some elements in pseries_hp_errorlog
struct but also used them u32 after be32_to_cpu() conversion.

Example: In handle_dlpar_errorlog()
hp_elog->_drc_u.drc_index = be32_to_cpu(hp_elog->_drc_u.drc_index);

And later assigned to u32 type
dlpar_cpu() - u32 drc_index = hp_elog->_drc_u.drc_index;

This incorrect usage is giving the following warnings and the
patch resolve these warnings with the correct assignment.

arch/powerpc/platforms/pseries/dlpar.c:398:53: sparse: sparse:
incorrect type in argument 1 (different base types) @@
expected unsigned int [usertype] drc_index @@
got restricted __be32 [usertype] drc_index @@
...
arch/powerpc/platforms/pseries/dlpar.c:418:43: sparse: sparse:
incorrect type in assignment (different base types) @@
expected restricted __be32 [usertype] drc_count @@
got unsigned int [usertype] @@

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408182142.wuIKqYae-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202408182302.o7QRO45S-lkp@intel.com/
Signed-off-by: Haren Myneni <haren@linux.ibm.com>

v3:
- Fix warnings from using incorrect data types in pseries_hp_errorlog
  struct
v2:
- Remove pr_info() and TODO comments
- Update more information in the commit logs

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240822025028.938332-1-haren@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/atomic: Use YZ constraints for DS-form instructions 2024-10-04T14:33:30+00:00 Michael Ellerman mpe@ellerman.id.au 2024-09-16T12:05:10+00:00 de6e34238a1b449ad3f1d50a127a8ac861e63a9c commit 39190ac7cff1fd15135fa8e658030d9646fdb5f2 upstream. The 'ld' and 'std' instructions require a 4-byte aligned displacement because they are DS-form instructions. But the "m" asm constraint doesn't enforce that. That can lead to build errors if the compiler chooses a non-aligned displacement, as seen with GCC 14: /tmp/ccuSzwiR.s: Assembler messages: /tmp/ccuSzwiR.s:2579: Error: operand out of domain (39 is not a multiple of 4) make[5]: *** [scripts/Makefile.build:229: net/core/page_pool.o] Error 1 Dumping the generated assembler shows: ld 8,39(8) # MEM[(const struct atomic64_t *)_29].counter, t Use the YZ constraints to tell the compiler either to generate a DS-form displacement, or use an X-form instruction, either of which prevents the build error. See commit 2d43cc701b96 ("powerpc/uaccess: Fix build errors seen with GCC 13/14") for more details on the constraint letters. Fixes: 9f0cbea0d8cc ("[POWERPC] Implement atomic{, 64}_{read, write}() without volatile") Cc: stable@vger.kernel.org # v2.6.24+ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/all/20240913125302.0a06b4c7@canb.auug.org.au Tested-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240916120510.2017749-1-mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 39190ac7cff1fd15135fa8e658030d9646fdb5f2 upstream.

The 'ld' and 'std' instructions require a 4-byte aligned displacement
because they are DS-form instructions. But the "m" asm constraint
doesn't enforce that.

That can lead to build errors if the compiler chooses a non-aligned
displacement, as seen with GCC 14:

  /tmp/ccuSzwiR.s: Assembler messages:
  /tmp/ccuSzwiR.s:2579: Error: operand out of domain (39 is not a multiple of 4)
  make[5]: *** [scripts/Makefile.build:229: net/core/page_pool.o] Error 1

Dumping the generated assembler shows:

  ld 8,39(8)       # MEM[(const struct atomic64_t *)_29].counter, t

Use the YZ constraints to tell the compiler either to generate a DS-form
displacement, or use an X-form instruction, either of which prevents the
build error.

See commit 2d43cc701b96 ("powerpc/uaccess: Fix build errors seen with
GCC 13/14") for more details on the constraint letters.

Fixes: 9f0cbea0d8cc ("[POWERPC] Implement atomic{, 64}_{read, write}() without volatile")
Cc: stable@vger.kernel.org # v2.6.24+
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20240913125302.0a06b4c7@canb.auug.org.au
Tested-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240916120510.2017749-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
crypto: powerpc/p10-aes-gcm - Disable CRYPTO_AES_GCM_P10 2024-10-04T14:33:14+00:00 Danny Tsen dtsen@linux.ibm.com 2024-09-19T11:36:37+00:00 e454a6482cd1c68c15c3cf719b2a2816777f53e1 [ Upstream commit 44ac4625ea002deecd0c227336c95b724206c698 ] Data mismatch found when testing ipsec tunnel with AES/GCM crypto. Disabling CRYPTO_AES_GCM_P10 in Kconfig for this feature. Fixes: fd0e9b3e2ee6 ("crypto: p10-aes-gcm - An accelerated AES/GCM stitched implementation") Fixes: cdcecfd9991f ("crypto: p10-aes-gcm - Glue code for AES/GCM stitched implementation") Fixes: 45a4672b9a6e2 ("crypto: p10-aes-gcm - Update Kconfig and Makefile") Signed-off-by: Danny Tsen <dtsen@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 44ac4625ea002deecd0c227336c95b724206c698 ]

Data mismatch found when testing ipsec tunnel with AES/GCM crypto.
Disabling CRYPTO_AES_GCM_P10 in Kconfig for this feature.

Fixes: fd0e9b3e2ee6 ("crypto: p10-aes-gcm - An accelerated AES/GCM stitched implementation")
Fixes: cdcecfd9991f ("crypto: p10-aes-gcm - Glue code for AES/GCM stitched implementation")
Fixes: 45a4672b9a6e2 ("crypto: p10-aes-gcm - Update Kconfig and Makefile")
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/vdso: Inconditionally use CFUNC macro 2024-10-04T14:32:45+00:00 Christophe Leroy christophe.leroy@csgroup.eu 2024-08-22T08:00:29+00:00 b001d0e023e1089387b2fbd143e29100da15858f [ Upstream commit 65948b0e716a47382731889ee6bbb18642b8b003 ] During merge of commit 4e991e3c16a3 ("powerpc: add CFUNC assembly label annotation") a fallback version of CFUNC macro was added at the last minute, so it can be used inconditionally. Fixes: 4e991e3c16a3 ("powerpc: add CFUNC assembly label annotation") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/0fa863f2f69b2ca4094ae066fcf1430fb31110c9.1724313540.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 65948b0e716a47382731889ee6bbb18642b8b003 ]

During merge of commit 4e991e3c16a3 ("powerpc: add CFUNC assembly
label annotation") a fallback version of CFUNC macro was added at
the last minute, so it can be used inconditionally.

Fixes: 4e991e3c16a3 ("powerpc: add CFUNC assembly label annotation")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/0fa863f2f69b2ca4094ae066fcf1430fb31110c9.1724313540.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/8xx: Fix kernel vs user address comparison 2024-10-04T14:32:45+00:00 Christophe Leroy christophe.leroy@csgroup.eu 2024-08-20T17:23:46+00:00 8135b983b8cba9cf3c257a9c0f40cfe8fdd9896a [ Upstream commit 65a82e117ffeeab0baf6f871a1cab11a28ace183 ] Since commit 9132a2e82adc ("powerpc/8xx: Define a MODULE area below kernel text"), module exec space is below PAGE_OFFSET so not only space above PAGE_OFFSET, but space above TASK_SIZE need to be seen as kernel space. Until now the problem went undetected because by default TASK_SIZE is 0x8000000 which means address space is determined by just checking upper address bit. But when TASK_SIZE is over 0x80000000, PAGE_OFFSET is used for comparison, leading to thinking module addresses are part of user space. Fix it by using TASK_SIZE instead of PAGE_OFFSET for address comparison. Fixes: 9132a2e82adc ("powerpc/8xx: Define a MODULE area below kernel text") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/3f574c9845ff0a023b46cb4f38d2c45aecd769bd.1724173828.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 65a82e117ffeeab0baf6f871a1cab11a28ace183 ]

Since commit 9132a2e82adc ("powerpc/8xx: Define a MODULE area below
kernel text"), module exec space is below PAGE_OFFSET so not only
space above PAGE_OFFSET, but space above TASK_SIZE need to be seen
as kernel space.

Until now the problem went undetected because by default TASK_SIZE
is 0x8000000 which means address space is determined by just
checking upper address bit. But when TASK_SIZE is over 0x80000000,
PAGE_OFFSET is used for comparison, leading to thinking module
addresses are part of user space.

Fix it by using TASK_SIZE instead of PAGE_OFFSET for address
comparison.

Fixes: 9132a2e82adc ("powerpc/8xx: Define a MODULE area below kernel text")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/3f574c9845ff0a023b46cb4f38d2c45aecd769bd.1724173828.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/8xx: Fix initial memory mapping 2024-10-04T14:32:45+00:00 Christophe Leroy christophe.leroy@csgroup.eu 2024-08-20T17:23:45+00:00 a386b732d5297908ac789b88afcc2409cc0dead8 [ Upstream commit f9f2bff64c2f0dbee57be3d8c2741357ad3d05e6 ] Commit cf209951fa7f ("powerpc/8xx: Map linear memory with huge pages") introduced an initial mapping of kernel TEXT using PAGE_KERNEL_TEXT, but the pages that contain kernel TEXT may also contain kernel RODATA, and depending on selected debug options PAGE_KERNEL_TEXT may be either RWX or ROX. RODATA must be writable during init because it also contains ro_after_init data. So use PAGE_KERNEL_X instead to be sure it is RWX. Fixes: cf209951fa7f ("powerpc/8xx: Map linear memory with huge pages") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/dac7a828d8497c4548c91840575a706657baa4f1.1724173828.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f9f2bff64c2f0dbee57be3d8c2741357ad3d05e6 ]

Commit cf209951fa7f ("powerpc/8xx: Map linear memory with huge pages")
introduced an initial mapping of kernel TEXT using PAGE_KERNEL_TEXT,
but the pages that contain kernel TEXT may also contain kernel RODATA,
and depending on selected debug options PAGE_KERNEL_TEXT may be either
RWX or ROX. RODATA must be writable during init because it also
contains ro_after_init data.

So use PAGE_KERNEL_X instead to be sure it is RWX.

Fixes: cf209951fa7f ("powerpc/8xx: Map linear memory with huge pages")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/dac7a828d8497c4548c91840575a706657baa4f1.1724173828.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/mm: Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL 2024-09-18T17:25:09+00:00 Christophe Leroy christophe.leroy@csgroup.eu 2024-08-08T07:05:08+00:00 59c1b7916dbab16b574f08d9427fcfcf80668cda [ Upstream commit e7e846dc6c73fbc94ae8b4ec20d05627646416f2 ] Booting with CONFIG_DEBUG_VIRTUAL leads to following warning when passing hugepage reservation on command line: Kernel command line: hugepagesz=1g hugepages=1 hugepagesz=64m hugepages=1 hugepagesz=256m hugepages=1 noreboot HugeTLB: allocating 1 of page size 1.00 GiB failed. Only allocated 0 hugepages. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at arch/powerpc/include/asm/io.h:948 __alloc_bootmem_huge_page+0xd4/0x284 Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 6.10.0-rc6-00396-g6b0e82791bd0-dirty #936 Hardware name: MPC8544DS e500v2 0x80210030 MPC8544 DS NIP: c1020240 LR: c10201d0 CTR: 00000000 REGS: c13fdd30 TRAP: 0700 Not tainted (6.10.0-rc6-00396-g6b0e82791bd0-dirty) MSR: 00021000 <CE,ME> CR: 44084288 XER: 20000000 GPR00: c10201d0 c13fde20 c130b560 e8000000 e8001000 00000000 00000000 c1420000 GPR08: 00000000 00028001 00000000 00000004 44084282 01066ac0 c0eb7c9c efffe149 GPR16: c0fc4228 0000005f ffffffff c0eb7d0c c0eb7cc0 c0eb7ce0 ffffffff 00000000 GPR24: c1441cec efffe153 e8001000 c14240c0 00000000 c1441d64 00000000 e8000000 NIP [c1020240] __alloc_bootmem_huge_page+0xd4/0x284 LR [c10201d0] __alloc_bootmem_huge_page+0x64/0x284 Call Trace: [c13fde20] [c10201d0] __alloc_bootmem_huge_page+0x64/0x284 (unreliable) [c13fde50] [c10207b8] hugetlb_hstate_alloc_pages+0x8c/0x3e8 [c13fdeb0] [c1021384] hugepages_setup+0x240/0x2cc [c13fdef0] [c1000574] unknown_bootoption+0xfc/0x280 [c13fdf30] [c0078904] parse_args+0x200/0x4c4 [c13fdfa0] [c1000d9c] start_kernel+0x238/0x7d0 [c13fdff0] [c0000434] set_ivor+0x12c/0x168 Code: 554aa33e 7c042840 3ce0c142 80a7427c 5109a016 50caa016 7c9a2378 7fdcf378 4180000c 7c052040 41810160 7c095040 <0fe00000> 38c00000 40800108 3c60c0eb ---[ end trace 0000000000000000 ]--- This is due to virt_addr_valid() using high_memory before it is set. high_memory is set in mem_init() using max_low_pfn, but max_low_pfn is available long before, it is set in mem_topology_setup(). So just like commit daa9ada2093e ("powerpc/mm: Fix boot crash with FLATMEM") moved the setting of max_mapnr immediately after the call to mem_topology_setup(), the same can be done for high_memory. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/62b69c4baad067093f39e7e60df0fe27a86b8d2a.1723100702.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e7e846dc6c73fbc94ae8b4ec20d05627646416f2 ]

Booting with CONFIG_DEBUG_VIRTUAL leads to following warning when
passing hugepage reservation on command line:

  Kernel command line: hugepagesz=1g hugepages=1 hugepagesz=64m hugepages=1 hugepagesz=256m hugepages=1 noreboot
  HugeTLB: allocating 1 of page size 1.00 GiB failed.  Only allocated 0 hugepages.
  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 0 at arch/powerpc/include/asm/io.h:948 __alloc_bootmem_huge_page+0xd4/0x284
  Modules linked in:
  CPU: 0 PID: 0 Comm: swapper Not tainted 6.10.0-rc6-00396-g6b0e82791bd0-dirty #936
  Hardware name: MPC8544DS e500v2 0x80210030 MPC8544 DS
  NIP:  c1020240 LR: c10201d0 CTR: 00000000
  REGS: c13fdd30 TRAP: 0700   Not tainted  (6.10.0-rc6-00396-g6b0e82791bd0-dirty)
  MSR:  00021000 <CE,ME>  CR: 44084288  XER: 20000000

  GPR00: c10201d0 c13fde20 c130b560 e8000000 e8001000 00000000 00000000 c1420000
  GPR08: 00000000 00028001 00000000 00000004 44084282 01066ac0 c0eb7c9c efffe149
  GPR16: c0fc4228 0000005f ffffffff c0eb7d0c c0eb7cc0 c0eb7ce0 ffffffff 00000000
  GPR24: c1441cec efffe153 e8001000 c14240c0 00000000 c1441d64 00000000 e8000000
  NIP [c1020240] __alloc_bootmem_huge_page+0xd4/0x284
  LR [c10201d0] __alloc_bootmem_huge_page+0x64/0x284
  Call Trace:
  [c13fde20] [c10201d0] __alloc_bootmem_huge_page+0x64/0x284 (unreliable)
  [c13fde50] [c10207b8] hugetlb_hstate_alloc_pages+0x8c/0x3e8
  [c13fdeb0] [c1021384] hugepages_setup+0x240/0x2cc
  [c13fdef0] [c1000574] unknown_bootoption+0xfc/0x280
  [c13fdf30] [c0078904] parse_args+0x200/0x4c4
  [c13fdfa0] [c1000d9c] start_kernel+0x238/0x7d0
  [c13fdff0] [c0000434] set_ivor+0x12c/0x168
  Code: 554aa33e 7c042840 3ce0c142 80a7427c 5109a016 50caa016 7c9a2378 7fdcf378 4180000c 7c052040 41810160 7c095040 <0fe00000> 38c00000 40800108 3c60c0eb
  ---[ end trace 0000000000000000 ]---

This is due to virt_addr_valid() using high_memory before it is set.

high_memory is set in mem_init() using max_low_pfn, but max_low_pfn
is available long before, it is set in mem_topology_setup(). So just
like commit daa9ada2093e ("powerpc/mm: Fix boot crash with FLATMEM")
moved the setting of max_mapnr immediately after the call to
mem_topology_setup(), the same can be done for high_memory.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/62b69c4baad067093f39e7e60df0fe27a86b8d2a.1723100702.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/vdso: Don't discard rela sections 2024-09-12T09:13:10+00:00 Christophe Leroy christophe.leroy@csgroup.eu 2024-08-20T11:28:07+00:00 55fe39810bead547dbbc24980e880fd314dcd3fb [ Upstream commit 6114139c3bdde992f4a19264e4f9bfc100d8d776 ] After building the VDSO, there is a verification that it contains no dynamic relocation, see commit aff69273af61 ("vdso: Improve cmd_vdso_check to check all dynamic relocations"). This verification uses readelf -r and doesn't work if rela sections are discarded. Fixes: 8ad57add77d3 ("powerpc/build: vdso linker warning for orphan sections") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/45c3e6fc76cad05ad2cac0f5b5dfb4fae86dc9d6.1724153239.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 6114139c3bdde992f4a19264e4f9bfc100d8d776 ]

After building the VDSO, there is a verification that it contains
no dynamic relocation, see commit aff69273af61 ("vdso: Improve
cmd_vdso_check to check all dynamic relocations").

This verification uses readelf -r and doesn't work if rela sections
are discarded.

Fixes: 8ad57add77d3 ("powerpc/build: vdso linker warning for orphan sections")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/45c3e6fc76cad05ad2cac0f5b5dfb4fae86dc9d6.1724153239.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>