Commit 4f86a06e2d6e ("irqdomain: Make normal and nomap irqdomains
exclusive") introduced an IRQ_DOMAIN_FLAG_NO_MAP flag to isolate the
'nomap' domains still in use under the powerpc arch. With this new
flag, the revmap_tree of the IRQ domain is not used anymore. This
change broke the support of shared LSIs [1] in the XIVE driver because
it was relying on a lookup in the revmap_tree to query previously
mapped interrupts. Linux now creates two distinct IRQ mappings on the
same HW IRQ which can lead to unexpected behavior in the drivers.

The XIVE IRQ domain is not a direct mapping domain and its HW IRQ
interrupt number space is rather large : 1M/socket on POWER9 and
POWER10, change the XIVE driver to use a 'tree' domain type instead.

[1] For instance, a linux KVM guest with virtio-rng and virtio-balloon
    devices.

Fixes: 4f86a06e2d6e ("irqdomain: Make normal and nomap irqdomains exclusive")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211116134022.420412-1-clg@kaod.org

Pull powerpc updates from Michael Ellerman:

 - Enable STRICT_KERNEL_RWX for Freescale 85xx platforms.

 - Activate CONFIG_STRICT_KERNEL_RWX by default, while still allowing it
   to be disabled.

 - Add support for out-of-line static calls on 32-bit.

 - Fix oopses doing bpf-to-bpf calls when STRICT_KERNEL_RWX is enabled.

 - Fix boot hangs on e5500 due to stale value in ESR passed to
   do_page_fault().

 - Fix several bugs on pseries in handling of device tree cache
   information for hotplugged CPUs, and/or during partition migration.

 - Various other small features and fixes.

Thanks to Alexey Kardashevskiy, Alistair Popple, Anatolij Gustschin,
Andrew Donnellan, Athira Rajeev, Bixuan Cui, Bjorn Helgaas, Cédric Le
Goater, Christophe Leroy, Daniel Axtens, Daniel Henrique Barboza, Denis
Kirjanov, Fabiano Rosas, Frederic Barrat, Gustavo A.  R.  Silva, Hari
Bathini, Jacques de Laval, Joel Stanley, Kai Song, Kajol Jain, Laurent
Vivier, Leonardo Bras, Madhavan Srinivasan, Nathan Chancellor, Nathan
Lynch, Naveen N.  Rao, Nicholas Piggin, Nick Desaulniers, Niklas
Schnelle, Oliver O'Halloran, Rob Herring, Russell Currey, Srikar
Dronamraju, Stan Johnson, Tyrel Datwyler, Uwe Kleine-König, Vasant
Hegde, Wan Jiabing, and Xiaoming Ni,

* tag 'powerpc-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (73 commits)
  powerpc/8xx: Fix Oops with STRICT_KERNEL_RWX without DEBUG_RODATA_TEST
  powerpc/32e: Ignore ESR in instruction storage interrupt handler
  powerpc/powernv/prd: Unregister OPAL_MSG_PRD2 notifier during module unload
  powerpc: Don't provide __kernel_map_pages() without ARCH_SUPPORTS_DEBUG_PAGEALLOC
  MAINTAINERS: Update powerpc KVM entry
  powerpc/xmon: fix task state output
  powerpc/44x/fsp2: add missing of_node_put
  powerpc/dcr: Use cmplwi instead of 3-argument cmpli
  KVM: PPC: Tick accounting should defer vtime accounting 'til after IRQ handling
  powerpc/security: Use a mutex for interrupt exit code patching
  powerpc/83xx/mpc8349emitx: Make mcu_gpiochip_remove() return void
  powerpc/fsl_booke: Fix setting of exec flag when setting TLBCAMs
  powerpc/book3e: Fix set_memory_x() and set_memory_nx()
  powerpc/nohash: Fix __ptep_set_access_flags() and ptep_set_wrprotect()
  powerpc/bpf: Fix write protecting JIT code
  selftests/powerpc: Use date instead of EPOCHSECONDS in mitigation-patching.sh
  powerpc/64s/interrupt: Fix check_return_regs_valid() false positive
  powerpc/boot: Set LC_ALL=C in wrapper script
  powerpc/64s: Default to 64K pages for 64 bit book3s
  Revert "powerpc/audit: Convert powerpc to AUDIT_ARCH_COMPAT_GENERIC"
  ...

In dcr-low.S we use cmpli with three arguments, instead of four
arguments as defined in the ISA:

	cmpli	cr0,r3,1024

This appears to be a PPC440-ism, looking at the "PPC440x5 CPU Core
User’s Manual" it shows cmpli having no L field, but implied to be 0 due
to the core being 32-bit. It mentions that the ISA defines four
arguments and recommends using cmplwi.

It also corresponds to the old POWER instruction set, which had no L
field there, a reserved bit instead.

dcr-low.S is only built 32-bit, because it is only built when
DCR_NATIVE=y, which is only selected by 40x and 44x. Looking at the
generated code (with gcc/gas) we see cmplwi as expected.

Although gas is happy with the 3-argument version when building for
32-bit, the LLVM assembler is not and errors out with:

  arch/powerpc/sysdev/dcr-low.S:27:10: error: invalid operand for instruction
   cmpli 0,%r3,1024; ...
           ^

Switch to the cmplwi extended opcode, which avoids any confusion when
reading the ISA, fixes the issue with the LLVM assembler, and also means
the code could be built 64-bit in future (though that's very unlikely).

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
BugLink: https://github.com/ClangBuiltLinux/linux/issues/1419
Link: https://lore.kernel.org/r/20211014024424.528848-1-mpe@ellerman.id.au

When an interrupt is passed through, the KVM XIVE device calls the
set_vcpu_affinity() handler which raises the P bit to mask the
interrupt and to catch any in-flight interrupts while routing the
interrupt to the guest.

On the guest side, drivers (like some Intels) can request at probe
time some MSIs and call synchronize_irq() to check that there are no
in flight interrupts. This will call the XIVE get_irqchip_state()
handler which will always return true as the interrupt P bit has been
set on the host side and lock the CPU in an infinite loop.

Fix that by discarding disabled interrupts in get_irqchip_state().

Fixes: da15c03b047d ("powerpc/xive: Implement get_irqchip_state method for XIVE to fix shutdown race")
Cc: stable@vger.kernel.org #v5.4+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: seeteena <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211011070203.99726-1-clg@kaod.org

The ICS native driver relies on the IRQ chip data to find the struct
'ics_native' describing the ICS controller but it was removed by commit
248af248a8f4 ("powerpc/xics: Rename the map handler in a check handler").
Revert this change to fix the Microwatt SoC platform.

Fixes: 248af248a8f4 ("powerpc/xics: Rename the map handler in a check handler")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210913134056.3761960-1-clg@kaod.org

Merge our fixes branch into next.

That lets us resolve a conflict in arch/powerpc/sysdev/xive/common.c.

Between cbc06f051c52 ("powerpc/xive: Do not skip CPU-less nodes when
creating the IPIs"), which moved request_irq() out of xive_init_ipis(),
and 17df41fec5b8 ("powerpc: use IRQF_NO_DEBUG for IPIs") which added
IRQF_NO_DEBUG to that request_irq() call, which has now moved.

40x and BOOKE don't have MSR_RI therefore all tests involving
MSR_RI may be problematic on those plateforms.

Create helpers to check or set MSR_RI in regs, and use them
in common code.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c2fb93708196734f4176dda334aaa3055f213b89.1629707037.git.christophe.leroy@csgroup.eu

Compiling ppc64le_defconfig with clang-14 shows a modpost warning:

WARNING: modpost: vmlinux.o(.text+0xa74e0): Section mismatch in
reference from the function xive_setup_cpu_ipi() to the function
.init.text:xive_request_ipi()
The function xive_setup_cpu_ipi() references
the function __init xive_request_ipi().
This is often because xive_setup_cpu_ipi lacks a __init
annotation or the annotation of xive_request_ipi is wrong.

xive_request_ipi() is called from xive_setup_cpu_ipi(), which is not
__init, so xive_request_ipi() should not be marked __init. Remove the
attribute so there is no more warning.

Fixes: cbc06f051c52 ("powerpc/xive: Do not skip CPU-less nodes when creating the IPIs")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210816185711.21563-1-nathan@kernel.org

No functional change in this patch. arch_debugfs_dir is the generic kernel
name declared in linux/debugfs.h for arch-specific debugfs directory.
Architectures like x86/s390 already use the name. Rename powerpc
specific powerpc_debugfs_root to arch_debugfs_dir.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210812132831.233794-2-aneesh.kumar@linux.ibm.com

On PowerVM, CPU-less nodes can be populated with hot-plugged CPUs at
runtime. Today, the IPI is not created for such nodes, and hot-plugged
CPUs use a bogus IPI, which leads to soft lockups.

We can not directly allocate and request the IPI on demand because
bringup_up() is called under the IRQ sparse lock. The alternative is
to allocate the IPIs for all possible nodes at startup and to request
the mapping on demand when the first CPU of a node is brought up.

Fixes: 7dcc37b3eff9 ("powerpc/xive: Map one IPI interrupt per node")
Cc: stable@vger.kernel.org # v5.13
Reported-by: Geetika Moolchandani <Geetika.Moolchandani1@ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210807072057.184698-1-clg@kaod.org