linux-stable.git/arch/powerpc/sysdev/xics, branch linux-4.3.y

powerpc, irq: Use access helper irq_data_get_affinity_mask()

2015-09-15T15:06:28+00:00

Use access helper irq_data_get_affinity_mask() so we can move the
affinity mask to irq_common_data.

Signed-off-by: Jiang Liu 
Cc: Benjamin Herrenschmidt 
Cc: Michael Ellerman 
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1433145945-789-25-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner

genirq/irqdomain: Allow irq domain aliasing

2015-07-29T22:14:36+00:00

It is not uncommon (at least with the ARM stuff) to have a piece
of hardware that implements different flavours of "interrupts".
A typical example of this is the GICv3 ITS, which implements
standard PCI/MSI support, but also some form of "generic MSI".

So far, the PCI/MSI domain is registered using the ITS device_node,
so that irq_find_host can return it. On the contrary, the raw MSI
domain is not registered with an device_node, making it impossible
to be looked up by another subsystem (obviously, using the same
device_node twice would only result in confusion, as it is not
defined which one irq_find_host would return).

A solution to this is to "type" domains that may be aliasing, and
to be able to lookup an device_node that matches a given type.
For this, we introduce irq_find_matching_host() as a superset
of irq_find_host:

struct irq_domain *irq_find_matching_host(struct device_node *node,
                                enum irq_domain_bus_token bus_token);

where bus_token is the "type" we want to match the domain against
(so far, only DOMAIN_BUS_ANY is defined). This result in some
moderately invasive changes on the PPC side (which is the only
user of the .match method).

This has otherwise no functionnal change.

Reviewed-by: Hanjun Guo 
Signed-off-by: Marc Zyngier 
Cc: 
Cc: Yijing Wang 
Cc: Ma Jun 
Cc: Lorenzo Pieralisi 
Cc: Duc Dang 
Cc: Bjorn Helgaas 
Cc: Jiang Liu 
Cc: Jason Cooper 
Link: http://lkml.kernel.org/r/1438091186-10244-2-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner

treewide: Use helper function to access irq_data->msi_desc

2015-07-16T21:31:37+00:00

Use irq_data access helper to access irq_data->msi_desc, so we can
move msi_desc from struct irq_data into struct irq_common_data later.

Signed-off-by: Jiang Liu 
Cc: Bjorn Helgaas 
Cc: Tony Luck 
Cc: Fenghua Yu 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: Michael Ellerman 
Cc: Chris Metcalf 
Signed-off-by: Thomas Gleixner

powerpc: Make doorbell check preemption safe

2015-06-16T22:01:03+00:00

Doorbell can be used to cause ipi on cpus which are sibling threads on
the same core. So icp_native_cause_ipi checks if the destination cpu
is a sibling thread of the current cpu and uses doorbell in such cases.

But while running with CONFIG_PREEMPT=y, since this section is
preemtible, we can run into issues if after we check if the destination
cpu is a sibling cpu, the task gets migrated from a sibling cpu to a
cpu on another core.

Fix this by using get_cpu()/ put_cpu()

Signed-off-by: Shreyas B. Prabhu 
Signed-off-by: Michael Neuling 
Signed-off-by: Michael Ellerman

powerpc: Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc

2015-06-02T06:54:44+00:00

Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc while we
already have a pointer to corresponding irq_desc.

Signed-off-by: Jiang Liu 
Signed-off-by: Michael Ellerman

powerpc: Constify irq_domain_ops

2015-05-11T06:58:20+00:00

The irq_domain_ops are not modified by the driver and the irqdomain core
code accepts pointer to a const data.

Signed-off-by: Krzysztof Kozlowski 
Signed-off-by: Michael Ellerman

powerpc: Drop return value of smp_ops->probe()

2015-04-10T10:02:49+00:00

smp_ops->probe() is currently supposed to return the number of cpus in
the system.

The last actual usage of the value was removed in May 2007 in e147ec8f1808
"[POWERPC] Simplify smp_space_timers". We still passed the value around
until June 2010 when even that was finally removed in c1aa687d499a
"powerpc: Clean up obsolete code relating to decrementer and timebase".

So drop that requirement, probe() now returns void, and update all
implementations.

Signed-off-by: Michael Ellerman

powerpc: use %*pb[l] to print bitmaps including cpumasks and nodemasks

2015-02-14T05:21:36+00:00

printk and friends can now format bitmaps using '%*pb[l]'.  cpumask
and nodemask also provide cpumask_pr_args() and nodemask_pr_args()
respectively which can be used to generate the two printf arguments
necessary to format the specified cpu/nodemask.

* Spurious if (len > 1) test dropped from shared_cpu_map_show().

Signed-off-by: Tejun Heo 
Cc: Benjamin Herrenschmidt 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

powerpc: Replace cpumask_weight(cpu_possible_mask) with num_possible_cpus()

2015-01-23T03:02:51+00:00

num_possible_cpus() is just a shorthand for it.

Signed-off-by: Emil Medve 
Signed-off-by: Michael Ellerman

Merge tag 'powerpc-3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux

2014-12-12T01:48:14+00:00

Pull powerpc updates from Michael Ellerman:
"Some nice cleanups like removing bootmem, and removal of
__get_cpu_var().

There is one patch to mm/gup.c. This is the generic GUP
implementation, but is only used by us and arm(64). We have an ack
from Steve Capper, and although we didn't get an ack from Andrew he
told us to take the patch through the powerpc tree.

There's one cxl patch. This is in drivers/misc, but Greg said he was
happy for us to manage fixes for it.

There is an infrastructure patch to support an IPMI driver for OPAL.

There is also an RTC driver for OPAL. We weren't able to get any
response from the RTC maintainer, Alessandro Zummo, so in the end we
just merged the driver.

The usual batch of Freescale updates from Scott"

* tag 'powerpc-3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (101 commits)
powerpc/powernv: Return to cpu offline loop when finished in KVM guest
powerpc/book3s: Fix partial invalidation of TLBs in MCE code.
powerpc/mm: don't do tlbie for updatepp request with NO HPTE fault
powerpc/xmon: Cleanup the breakpoint flags
powerpc/xmon: Enable HW instruction breakpoint on POWER8
powerpc/mm/thp: Use tlbiel if possible
powerpc/mm/thp: Remove code duplication
powerpc/mm/hugetlb: Sanity check gigantic hugepage count
powerpc/oprofile: Disable pagefaults during user stack read
powerpc/mm: Check for matching hpte without taking hpte lock
powerpc: Drop useless warning in eeh_init()
powerpc/powernv: Cleanup unused MCE definitions/declarations.
powerpc/eeh: Dump PHB diag-data early
powerpc/eeh: Recover EEH error on ownership change for BCM5719
powerpc/eeh: Set EEH_PE_RESET on PE reset
powerpc/eeh: Refactor eeh_reset_pe()
powerpc: Remove more traces of bootmem
powerpc/pseries: Initialise nvram_pstore_info's buf_lock
cxl: Name interrupts in /proc/interrupt
cxl: Return error to PSL if IRQ demultiplexing fails & print clearer warning
...