Pull networking fixes from David Miller:
 "Lots of bug fixes here:

   1) Out of bounds access in __bpf_skc_lookup, from Lorenz Bauer.

   2) Fix rate reporting in cfg80211_calculate_bitrate_he(), from John
      Crispin.

   3) Use after free in psock backlog workqueue, from John Fastabend.

   4) Fix source port matching in fdb peer flow rule of mlx5, from Raed
      Salem.

   5) Use atomic_inc_not_zero() in fl6_sock_lookup(), from Eric Dumazet.

   6) Network header needs to be set for packet redirect in nfp, from
      John Hurley.

   7) Fix udp zerocopy refcnt, from Willem de Bruijn.

   8) Don't assume linear buffers in vxlan and geneve error handlers,
      from Stefano Brivio.

   9) Fix TOS matching in mlxsw, from Jiri Pirko.

  10) More SCTP cookie memory leak fixes, from Neil Horman.

  11) Fix VLAN filtering in rtl8366, from Linus Walluij.

  12) Various TCP SACK payload size and fragmentation memory limit fixes
      from Eric Dumazet.

  13) Use after free in pneigh_get_next(), also from Eric Dumazet.

  14) LAPB control block leak fix from Jeremy Sowden"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (145 commits)
  lapb: fixed leak of control-blocks.
  tipc: purge deferredq list for each grp member in tipc_group_delete
  ax25: fix inconsistent lock state in ax25_destroy_timer
  neigh: fix use-after-free read in pneigh_get_next
  tcp: fix compile error if !CONFIG_SYSCTL
  hv_sock: Suppress bogus "may be used uninitialized" warnings
  be2net: Fix number of Rx queues used for flow hashing
  net: handle 802.1P vlan 0 packets properly
  tcp: enforce tcp_min_snd_mss in tcp_mtu_probing()
  tcp: add tcp_min_snd_mss sysctl
  tcp: tcp_fragment() should apply sane memory limits
  tcp: limit payload size of sacked skbs
  Revert "net: phylink: set the autoneg state in phylink_phy_change"
  bpf: fix nested bpf tracepoints with per-cpu data
  bpf: Fix out of bounds memory access in bpf_sk_storage
  vsock/virtio: set SOCK_DONE on peer shutdown
  net: dsa: rtl8366: Fix up VLAN filtering
  net: phylink: set the autoneg state in phylink_phy_change
  net: add high_order_alloc_disable sysctl/static key
  tcp: add tcp_tx_skb_cache sysctl
  ...

BPF_ALU64 div/mod operations are currently using signed division, unlike
BPF_ALU32 operations. Fix the same. DIV64 and MOD64 overflow tests pass
with this fix.

Fixes: 156d0e290e969c ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation version 2 of the license

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 315 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Daniel Borkmann says:

====================
pull-request: bpf 2019-03-16

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix a umem memory leak on cleanup in AF_XDP, from Björn.

2) Fix BTF to properly resolve forward-declared enums into their corresponding
   full enum definition types during deduplication, from Andrii.

3) Fix libbpf to reject invalid flags in xsk_socket__create(), from Magnus.

4) Fix accessing invalid pointer returned from bpf_tcp_sock() and
   bpf_sk_fullsock() after bpf_sk_release() was called, from Martin.

5) Fix generation of load/store DW instructions in PPC JIT, from Naveen.

6) Various fixes in BPF helper function documentation in bpf.h UAPI header
   used to bpf-helpers(7) man page, from Quentin.

7) Fix segfault in BPF test_progs when prog loading failed, from Yonghong.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Yauheni Kaliuta pointed out that PTR_TO_STACK store/load verifier test
was failing on powerpc64 BE, and rightfully indicated that the PPC_LD()
macro is not masking away the last two bits of the offset per the ISA,
resulting in the generation of 'lwa' instruction instead of the intended
'ld' instruction.

Segher also pointed out that we can't simply mask away the last two bits
as that will result in loading/storing from/to a memory location that
was not intended.

This patch addresses this by using ldx/stdx if the offset is not
word-aligned. We load the offset into a temporary register (TMP_REG_2)
and use that as the index register in a subsequent ldx/stdx. We fix
PPC_LD() macro to mask off the last two bits, but enhance PPC_BPF_LL()
and PPC_BPF_STL() to factor in the offset value and generate the proper
instruction sequence. We also convert all existing users of PPC_LD() and
PPC_STD() to use these macros. All existing uses of these macros have
been audited to ensure that TMP_REG_2 can be clobbered.

Fixes: 156d0e290e96 ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF")
Cc: stable@vger.kernel.org # v4.9+

Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Pull powerpc updates from Michael Ellerman:
 "Notable changes:

   - Enable THREAD_INFO_IN_TASK to move thread_info off the stack.

   - A big series from Christoph reworking our DMA code to use more of
     the generic infrastructure, as he said:
       "This series switches the powerpc port to use the generic swiotlb
        and noncoherent dma ops, and to use more generic code for the
        coherent direct mapping, as well as removing a lot of dead
        code."

   - Increase our vmalloc space to 512T with the Hash MMU on modern
     CPUs, allowing us to support machines with larger amounts of total
     RAM or distance between nodes.

   - Two series from Christophe, one to optimise TLB miss handlers on
     6xx, and another to optimise the way STRICT_KERNEL_RWX is
     implemented on some 32-bit CPUs.

   - Support for KCOV coverage instrumentation which means we can run
     syzkaller and discover even more bugs in our code.

  And as always many clean-ups, reworks and minor fixes etc.

  Thanks to: Alan Modra, Alexey Kardashevskiy, Alistair Popple, Andrea
  Arcangeli, Andrew Donnellan, Aneesh Kumar K.V, Aravinda Prasad, Balbir
  Singh, Brajeswar Ghosh, Breno Leitao, Christian Lamparter, Christian
  Zigotzky, Christophe Leroy, Christoph Hellwig, Corentin Labbe, Daniel
  Axtens, David Gibson, Diana Craciun, Firoz Khan, Gustavo A. R. Silva,
  Igor Stoppa, Joe Lawrence, Joel Stanley, Jonathan Neuschäfer, Jordan
  Niethe, Laurent Dufour, Madhavan Srinivasan, Mahesh Salgaonkar, Mark
  Cave-Ayland, Masahiro Yamada, Mathieu Malaterre, Matteo Croce, Meelis
  Roos, Michael W. Bringmann, Nathan Chancellor, Nathan Fontenot,
  Nicholas Piggin, Nick Desaulniers, Nicolai Stange, Oliver O'Halloran,
  Paul Mackerras, Peter Xu, PrasannaKumar Muralidharan, Qian Cai,
  Rashmica Gupta, Reza Arbab, Robert P. J. Day, Russell Currey,
  Sabyasachi Gupta, Sam Bobroff, Sandipan Das, Sergey Senozhatsky,
  Souptick Joarder, Stewart Smith, Tyrel Datwyler, Vaibhav Jain,
  YueHaibing"

* tag 'powerpc-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits)
  powerpc/32: Clear on-stack exception marker upon exception return
  powerpc: Remove export of save_stack_trace_tsk_reliable()
  powerpc/mm: fix "section_base" set but not used
  powerpc/mm: Fix "sz" set but not used warning
  powerpc/mm: Check secondary hash page table
  powerpc: remove nargs from __SYSCALL
  powerpc/64s: Fix unrelocated interrupt trampoline address test
  powerpc/powernv/ioda: Fix locked_vm counting for memory used by IOMMU tables
  powerpc/fsl: Fix the flush of branch predictor.
  powerpc/powernv: Make opal log only readable by root
  powerpc/xmon: Fix opcode being uninitialized in print_insn_powerpc
  powerpc/powernv: move OPAL call wrapper tracing and interrupt handling to C
  powerpc/64s: Fix data interrupts vs d-side MCE reentrancy
  powerpc/64s: Prepare to handle data interrupts vs d-side MCE reentrancy
  powerpc/64s: system reset interrupt preserve HSRRs
  powerpc/64s: Fix HV NMI vs HV interrupt recoverability test
  powerpc/mm/hash: Handle mmap_min_addr correctly in get_unmapped_area topdown search
  powerpc/hugetlb: Handle mmap_min_addr correctly in get_unmapped_area callback
  selftests/powerpc: Remove duplicate header
  powerpc sstep: Add support for modsd, modud instructions
  ...

This patch activates CONFIG_THREAD_INFO_IN_TASK which
moves the thread_info into task_struct.

Moving thread_info into task_struct has the following advantages:
  - It protects thread_info from corruption in the case of stack
    overflows.
  - Its address is harder to determine if stack addresses are leaked,
    making a number of attacks more difficult.

This has the following consequences:
  - thread_info is now located at the beginning of task_struct.
  - The 'cpu' field is now in task_struct, and only exists when
    CONFIG_SMP is active.
  - thread_info doesn't have anymore the 'task' field.

This patch:
  - Removes all recopy of thread_info struct when the stack changes.
  - Changes the CURRENT_THREAD_INFO() macro to point to current.
  - Selects CONFIG_THREAD_INFO_IN_TASK.
  - Modifies raw_smp_processor_id() to get ->cpu from current without
    including linux/sched.h to avoid circular inclusion and without
    including asm/asm-offsets.h to avoid symbol names duplication
    between ASM constants and C constants.
  - Modifies klp_init_thread_info() to take a task_struct pointer
    argument.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Add task_stack.h to livepatch.h to fix build fails]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This adds support for generating bpf line info for
JITed programs.

Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This patch implements code-gen for new JMP32 instructions on ppc.

For JMP32 | JSET, instruction encoding for PPC_RLWINM_DOT is added to check
the result of ANDing low 32-bit of operands.

Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf-next 2018-12-11

The following pull-request contains BPF updates for your *net-next* tree.

It has three minor merge conflicts, resolutions:

1) tools/testing/selftests/bpf/test_verifier.c

 Take first chunk with alignment_prevented_execution.

2) net/core/filter.c

  [...]
  case bpf_ctx_range_ptr(struct __sk_buff, flow_keys):
  case bpf_ctx_range(struct __sk_buff, wire_len):
        return false;
  [...]

3) include/uapi/linux/bpf.h

  Take the second chunk for the two cases each.

The main changes are:

1) Add support for BPF line info via BTF and extend libbpf as well
   as bpftool's program dump to annotate output with BPF C code to
   facilitate debugging and introspection, from Martin.

2) Add support for BPF_ALU | BPF_ARSH | BPF_{K,X} in interpreter
   and all JIT backends, from Jiong.

3) Improve BPF test coverage on archs with no efficient unaligned
   access by adding an "any alignment" flag to the BPF program load
   to forcefully disable verifier alignment checks, from David.

4) Add a new bpf_prog_test_run_xattr() API to libbpf which allows for
   proper use of BPF_PROG_TEST_RUN with data_out, from Lorenz.

5) Extend tc BPF programs to use a new __sk_buff field called wire_len
   for more accurate accounting of packets going to wire, from Petar.

6) Improve bpftool to allow dumping the trace pipe from it and add
   several improvements in bash completion and map/prog dump,
   from Quentin.

7) Optimize arm64 BPF JIT to always emit movn/movk/movk sequence for
   kernel addresses and add a dedicated BPF JIT backend allocator,
   from Ard.

8) Add a BPF helper function for IR remotes to report mouse movements,
   from Sean.

9) Various cleanups in BPF prog dump e.g. to make UAPI bpf_prog_info
   member naming consistent with existing conventions, from Yonghong
   and Song.

10) Misc cleanups and improvements in allowing to pass interface name
    via cmdline for xdp1 BPF example, from Matteo.

11) Fix a potential segfault in BPF sample loader's kprobes handling,
    from Daniel T.

12) Fix SPDX license in libbpf's README.rst, from Andrey.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>