commit 1f7aacc5eb9ed2cc17be7a90da5cd559effb9d59 upstream.
For an SR-IOV device, while enabling DDW, a new table is created and
added at index 1 in the group. In the below 2 scenarios, the table is
incorrectly referenced at index 0 (which is where the table is for
default DMA window).
1. When adding DDW
This issue is exposed with "slub_debug". Error thrown out from
dma_iommu_dma_supported()
Warning: IOMMU offset too big for device mask
mask: 0xffffffff, table offset: 0x800000000000000
2. During Dynamic removal of the PCI device.
Error is from iommu_tce_table_put() since a NULL table pointer is
passed in.
Fixes: 381ceda88c4c ("powerpc/pseries/iommu: Make use of DDW for indirect mapping")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Gaurav Batra <gbatra@linux.vnet.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230505184701.91613-1-gbatra@linux.vnet.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 096339ab84f36beae0b1db25e0ce63fb3873e8b2 upstream.
When DMA window is backed by 2MB TCEs, the DMA address for the mapped
page should be the offset of the page relative to the 2MB TCE. The code
was incorrectly setting the DMA address to the beginning of the TCE
range.
Mellanox driver is reporting timeout trying to ENABLE_HCA for an SR-IOV
ethernet port, when DMA window is backed by 2MB TCEs.
Fixes: 387273118714 ("powerps/pseries/dma: Add support for 2M IOMMU page size")
Cc: stable@vger.kernel.org # v5.16+
Signed-off-by: Gaurav Batra <gbatra@linux.vnet.ibm.com>
Reviewed-by: Greg Joyce <gjoyce@linux.vnet.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230504175913.83844-1-gbatra@linux.vnet.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 857d423c74228cfa064f79ff3a16b163fdb8d542 ] It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by: Rob Herring <robh@kernel.org> [mpe: Drop change in ppc4xx_probe_pci_bridge(), formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230310144657.1541039-1-robh@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 271208ee5e335cb1ad280d22784940daf7ddf820 ]
Using memcpy() isn't safe when buf is identical to rtas_err_buf, which
can happen during boot before slab is up. Full context which may not
be obvious from the diff:
if (altbuf) {
buf = altbuf;
} else {
buf = rtas_err_buf;
if (slab_is_available())
buf = kmalloc(RTAS_ERROR_LOG_MAX, GFP_ATOMIC);
}
if (buf)
memcpy(buf, rtas_err_buf, RTAS_ERROR_LOG_MAX);
This was found by inspection and I'm not aware of it causing problems
in practice. It appears to have been introduced by commit
033ef338b6e0 ("powerpc: Merge rtas.c into arch/powerpc/kernel"); the
old ppc64 version of this code did not have this problem.
Use memmove() instead.
Fixes: 033ef338b6e0 ("powerpc: Merge rtas.c into arch/powerpc/kernel")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230220-rtas-queue-for-6-4-v1-2-010e4416f13f@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pull powerpc fixes from Michael Ellerman: - Fix a false positive warning in __pte_needs_flush() (with DEBUG_VM=y) - Fix oops when a PF_IO_WORKER thread tries to core dump - Don't try to reconfigure VAS when it's disabled Thanks to Benjamin Gray, Haren Myneni, Jens Axboe, Nathan Lynch, and Russell Currey. * tag 'powerpc-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries/vas: Ignore VAS update for DLPAR if copy/paste is not enabled powerpc: Don't try to copy PPR for task with NULL pt_regs powerpc/64s: Fix __pte_needs_flush() false positive warning
powerpc sets up PF_KTHREAD and PF_IO_WORKER with a NULL pt_regs, which
from my (arguably very short) checking is not commonly done for other
archs. This is fine, except when PF_IO_WORKER's have been created and
the task does something that causes a coredump to be generated. Then we
get this crash:
Kernel attempted to read user page (160) - exploit attempt? (uid: 1000)
BUG: Kernel NULL pointer dereference on read at 0x00000160
Faulting instruction address: 0xc0000000000c3a60
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=32 NUMA pSeries
Modules linked in: bochs drm_vram_helper drm_kms_helper xts binfmt_misc ecb ctr syscopyarea sysfillrect cbc sysimgblt drm_ttm_helper aes_generic ttm sg libaes evdev joydev virtio_balloon vmx_crypto gf128mul drm dm_mod fuse loop configfs drm_panel_orientation_quirks ip_tables x_tables autofs4 hid_generic usbhid hid xhci_pci xhci_hcd usbcore usb_common sd_mod
CPU: 1 PID: 1982 Comm: ppc-crash Not tainted 6.3.0-rc2+ #88
Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries
NIP: c0000000000c3a60 LR: c000000000039944 CTR: c0000000000398e0
REGS: c0000000041833b0 TRAP: 0300 Not tainted (6.3.0-rc2+)
MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 88082828 XER: 200400f8
...
NIP memcpy_power7+0x200/0x7d0
LR ppr_get+0x64/0xb0
Call Trace:
ppr_get+0x40/0xb0 (unreliable)
__regset_get+0x180/0x1f0
regset_get_alloc+0x64/0x90
elf_core_dump+0xb98/0x1b60
do_coredump+0x1c34/0x24a0
get_signal+0x71c/0x1410
do_notify_resume+0x140/0x6f0
interrupt_exit_user_prepare_main+0x29c/0x320
interrupt_exit_user_prepare+0x6c/0xa0
interrupt_return_srr_user+0x8/0x138
Because ppr_get() is trying to copy from a PF_IO_WORKER with a NULL
pt_regs.
Check for a valid pt_regs in both ppc_get/ppr_set, and return an error
if not set. The actual error value doesn't seem to be important here, so
just pick -EINVAL.
Fixes: fa439810cc1b ("powerpc/ptrace: Enable support for NT_PPPC_TAR, NT_PPC_PPR, NT_PPC_DSCR")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[mpe: Trim oops in change log, add Fixes & Cc stable]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/d9f63344-fe7c-56ae-b420-4a1a04a2ae4c@kernel.dk
With appropriate compiler support [1], KASAN builds use __asan prefixed meminstrinsics, and KASAN no longer overrides memcpy/memset/memmove. If compiler support is detected (CC_HAS_KASAN_MEMINTRINSIC_PREFIX), define memintrinsics normally (do not prefix '__'). On powerpc, KASAN is the only user of __mem functions, which are used to define instrumented memintrinsics. Alias the normal versions for KASAN to use in its implementation. Link: https://lore.kernel.org/all/20230224085942.1791837-1-elver@google.com/ [1] Link: https://lore.kernel.org/oe-kbuild-all/202302271348.U5lvmo0S-lkp@intel.com/ Link: https://lkml.kernel.org/r/20230227094726.3833247-1-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Reported-by: kernel test robot <lkp@intel.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Daniel Axtens <dja@axtens.net> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull powerpc fixes from Michael Ellerman: - Drop orphaned VAS MAINTAINERS entry - Fix build errors with clang and KCSAN - Avoid build errors seen with LD_DEAD_CODE_DATA_ELIMINATION together with recordmcount Thanks to Nathan Chancellor. * tag 'powerpc-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Avoid dead code/data elimination when using recordmcount powerpc/vmlinux.lds: Add .text.asan/tsan sections powerpc: Drop orphaned VAS MAINTAINERS entry
When KASAN/KCSAN are enabled clang generates .text.asan/tsan sections.
Because they are not mentioned in the linker script warnings are
generated, and when orphan handling is set to error that becomes a build
error, eg:
ld.lld: error: vmlinux.a(init/main.o):(.text.tsan.module_ctor) is
being placed in '.text.tsan.module_ctor' ld.lld: error:
vmlinux.a(init/version.o):(.text.tsan.module_ctor) is being placed in
'.text.tsan.module_ctor'
Fix it by adding the sections to our linker script, similar to the
generic change made in 848378812e40 ("vmlinux.lds.h: Handle clang's
module.{c,d}tor sections").
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230222060037.2897169-1-mpe@ellerman.id.au
Pull Kbuild updates from Masahiro Yamada: - Change V=1 option to print both short log and full command log - Allow V=1 and V=2 to be combined as V=12 - Make W=1 detect wrong .gitignore files - Tree-wide cleanups for unused command line arguments passed to Clang - Stop using -Qunused-arguments with Clang - Make scripts/setlocalversion handle only correct release tags instead of any arbitrary annotated tag - Create Debian and RPM source packages without cleaning the source tree - Various cleanups for packaging * tag 'kbuild-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (74 commits) kbuild: rpm-pkg: remove unneeded KERNELRELEASE from modules/headers_install docs: kbuild: remove description of KBUILD_LDS_MODULE .gitattributes: use 'dts' diff driver for *.dtso files kbuild: deb-pkg: improve the usability of source package kbuild: deb-pkg: fix binary-arch and clean in debian/rules kbuild: tar-pkg: use tar rules in scripts/Makefile.package kbuild: make perf-tar*-src-pkg work without relying on git kbuild: deb-pkg: switch over to source format 3.0 (quilt) kbuild: deb-pkg: make .orig tarball a hard link if possible kbuild: deb-pkg: hide KDEB_SOURCENAME from Makefile kbuild: srcrpm-pkg: create source package without cleaning kbuild: rpm-pkg: build binary packages from source rpm kbuild: deb-pkg: create source package without cleaning kbuild: add a tool to list files ignored by git Documentation/llvm: add Chimera Linux, Google and Meta datacenters setlocalversion: use only the correct release tag for git-describe setlocalversion: clean up the construction of version output .gitignore: ignore *.cover and *.mbx kbuild: remove --include-dir MAKEFLAG from top Makefile kbuild: fix trivial typo in comment ...