linux-stable.git/arch/powerpc/kernel, branch v5.4.41

powerpc/mm: Fix CONFIG_PPC_KUAP_DEBUG on PPC32

2020-04-29T14:33:25+00:00

commit feb8e960d780e170e992a70491eec9dd68f4dbf2 upstream.

CONFIG_PPC_KUAP_DEBUG is not selectable because it depends on PPC_32
which doesn't exists.

Fixing it leads to a deadlock due to a vital register getting
clobbered in _switch().

Change dependency to PPC32 and use r0 instead of r4 in _switch()

Fixes: e2fb9f544431 ("powerpc/32: Prepare for Kernel Userspace Access Protection")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Christophe Leroy 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/540242f7d4573f7cdf1b3bf46bb35f743b2cd68f.1587124651.git.christophe.leroy@c-s.fr
Signed-off-by: Greg Kroah-Hartman

powerpc/setup_64: Set cache-line-size based on cache-block-size

2020-04-29T14:33:20+00:00

commit 94c0b013c98583614e1ad911e8795ca36da34a85 upstream.

If {i,d}-cache-block-size is set and {i,d}-cache-line-size is not, use
the block-size value for both. Per the devicetree spec cache-line-size
is only needed if it differs from the block size.

Originally the code would fallback from block size to line size. An
error message was printed if both properties were missing.

Later the code was refactored to use clearer names and logic but it
inadvertently made line size a required property, meaning on systems
without a line size property we fall back to the default from the
cputable.

On powernv (OPAL) platforms, since the introduction of device tree CPU
features (5a61ef74f269 ("powerpc/64s: Support new device tree binding
for discovering CPU features")), that has led to the wrong value being
used, as the fallback value is incorrect for Power8/Power9 CPUs.

The incorrect values flow through to the VDSO and also to the sysconf
values, SC_LEVEL1_ICACHE_LINESIZE etc.

Fixes: bd067f83b084 ("powerpc/64: Fix naming of cache block vs. cache line")
Cc: stable@vger.kernel.org # v4.11+
Signed-off-by: Chris Packham 
Reported-by: Qian Cai 
[mpe: Add even more detail to change log]
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20200416221908.7886-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Greg Kroah-Hartman

Revert "powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled"

2020-04-29T14:33:01+00:00

[ Upstream commit abc3fce76adbdfa8f87272c784b388cd20b46049 ]

This reverts commit ebb37cf3ffd39fdb6ec5b07111f8bb2f11d92c5f.

That commit does not play well with soft-masked irq state
manipulations in idle, interrupt replay, and possibly others due to
tracing code sometimes using irq_work_queue (e.g., in
trace_hardirqs_on()). That can cause PACA_IRQ_DEC to become set when
it is not expected, and be ignored or cleared or cause warnings.

The net result seems to be missing an irq_work until the next timer
interrupt in the worst case which is usually not going to be noticed,
however it could be a long time if the tick is disabled, which is
against the spirit of irq_work and might cause real problems.

The idea is still solid, but it would need more work. It's not really
clear if it would be worth added complexity, so revert this for
now (not a straight revert, but replace with a comment explaining why
we might see interrupts happening, and gives git blame something to
find).

Fixes: ebb37cf3ffd3 ("powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled")
Signed-off-by: Nicholas Piggin 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20200402120401.1115883-1-npiggin@gmail.com
Signed-off-by: Sasha Levin

powerpc/prom_init: Pass the "os-term" message to hypervisor

2020-04-23T08:36:34+00:00

[ Upstream commit 74bb84e5117146fa73eb9d01305975c53022b3c3 ]

The "os-term" RTAS calls has one argument with a message address of OS
termination cause. rtas_os_term() already passes it but the recently
added prom_init's version of that missed it; it also does not fill
args correctly.

This passes the message address and initializes the number of arguments.

Fixes: 6a9c930bd775 ("powerpc/prom_init: Add the ESM call to prom_init")
Signed-off-by: Alexey Kardashevskiy 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20200312074404.87293-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin

powerpc: Make setjmp/longjmp signature standard

2020-04-17T08:50:23+00:00

commit c17eb4dca5a353a9dbbb8ad6934fe57af7165e91 upstream.

Declaring setjmp()/longjmp() as taking longs makes the signature
non-standard, and makes clang complain. In the past, this has been
worked around by adding -ffreestanding to the compile flags.

The implementation looks like it only ever propagates the value
(in longjmp) or sets it to 1 (in setjmp), and we only call longjmp
with integer parameters.

This allows removing -ffreestanding from the compilation flags.

Fixes: c9029ef9c957 ("powerpc: Avoid clang warnings around setjmp and longjmp")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Clement Courbet 
Reviewed-by: Nathan Chancellor 
Tested-by: Nathan Chancellor 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20200330080400.124803-1-courbet@google.com
Signed-off-by: Nathan Chancellor 
Signed-off-by: Greg Kroah-Hartman

powerpc/64: Prevent stack protection in early boot

2020-04-17T08:50:23+00:00

commit 7053f80d96967d8e72e9f2a724bbfc3906ce2b07 upstream.

The previous commit reduced the amount of code that is run before we
setup a paca. However there are still a few remaining functions that
run with no paca, or worse, with an arbitrary value in r13 that will
be used as a paca pointer.

In particular the stack protector canary is stored in the paca, so if
stack protector is activated for any of these functions we will read
the stack canary from wherever r13 points. If r13 happens to point
outside of memory we will get a machine check / checkstop.

For example if we modify initialise_paca() to trigger stack
protection, and then boot in the mambo simulator with r13 poisoned in
skiboot before calling the kernel:

  DEBUG: 19952232: (19952232): INSTRUCTION: PC=0xC0000000191FC1E8: [0x3C4C006D]: addis   r2,r12,0x6D [fetch]
  DEBUG: 19952236: (19952236): INSTRUCTION: PC=0xC00000001807EAD8: [0x7D8802A6]: mflr    r12 [fetch]
  FATAL ERROR: 19952276: (19952276): Check Stop for 0:0: Machine Check with ME bit of MSR off
  DEBUG: 19952276: (19952276): INSTRUCTION: PC=0xC0000000191FCA7C: [0xE90D0CF8]: ld      r8,0xCF8(r13) [Instruction Failed]
  INFO: 19952276: (19952277): ** Execution stopped: Mambo Error, Machine Check Stop,  **
  systemsim % bt
  pc:                             0xC0000000191FCA7C      initialise_paca+0x54
  lr:                             0xC0000000191FC22C      early_setup+0x44
  stack:0x00000000198CBED0        0x0     +0x0
  stack:0x00000000198CBF00        0xC0000000191FC22C      early_setup+0x44
  stack:0x00000000198CBF90        0x1801C968      +0x1801C968

So annotate the relevant functions to ensure stack protection is never
enabled for them.

Fixes: 06ec27aea9fc ("powerpc/64: add stack protector support")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20200320032116.1024773-2-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman

powerpc/kprobes: Ignore traps that happened in real mode

2020-04-17T08:50:23+00:00

commit 21f8b2fa3ca5b01f7a2b51b89ce97a3705a15aa0 upstream.

When a program check exception happens while MMU translation is
disabled, following Oops happens in kprobe_handler() in the following
code:

	} else if (*addr != BREAKPOINT_INSTRUCTION) {

  BUG: Unable to handle kernel data access on read at 0x0000e268
  Faulting instruction address: 0xc000ec34
  Oops: Kernel access of bad area, sig: 11 [#1]
  BE PAGE_SIZE=16K PREEMPT CMPC885
  Modules linked in:
  CPU: 0 PID: 429 Comm: cat Not tainted 5.6.0-rc1-s3k-dev-00824-g84195dc6c58a #3267
  NIP:  c000ec34 LR: c000ecd8 CTR: c019cab8
  REGS: ca4d3b58 TRAP: 0300   Not tainted  (5.6.0-rc1-s3k-dev-00824-g84195dc6c58a)
  MSR:  00001032   CR: 2a4d3c52  XER: 00000000
  DAR: 0000e268 DSISR: c0000000
  GPR00: c000b09c ca4d3c10 c66d0620 00000000 ca4d3c60 00000000 00009032 00000000
  GPR08: 00020000 00000000 c087de44 c000afe0 c66d0ad0 100d3dd6 fffffff3 00000000
  GPR16: 00000000 00000041 00000000 ca4d3d70 00000000 00000000 0000416d 00000000
  GPR24: 00000004 c53b6128 00000000 0000e268 00000000 c07c0000 c07bb6fc ca4d3c60
  NIP [c000ec34] kprobe_handler+0x128/0x290
  LR [c000ecd8] kprobe_handler+0x1cc/0x290
  Call Trace:
  [ca4d3c30] [c000b09c] program_check_exception+0xbc/0x6fc
  [ca4d3c50] [c000e43c] ret_from_except_full+0x0/0x4
  --- interrupt: 700 at 0xe268
  Instruction dump:
  913e0008 81220000 38600001 3929ffff 91220000 80010024 bb410008 7c0803a6
  38210020 4e800020 38600000 4e800020 <813b0000> 6d2a7fe0 2f8a0008 419e0154
  ---[ end trace 5b9152d4cdadd06d ]---

kprobe is not prepared to handle events in real mode and functions
running in real mode should have been blacklisted, so kprobe_handler()
can safely bail out telling 'this trap is not mine' for any trap that
happened while in real-mode.

If the trap happened with MSR_IR or MSR_DR cleared, return 0
immediately.

Reported-by: Larry Finger 
Fixes: 6cc89bad60a6 ("powerpc/kprobes: Invoke handlers directly")
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Christophe Leroy 
Reviewed-by: Masami Hiramatsu 
Reviewed-by: Naveen N. Rao 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/424331e2006e7291a1bfe40e7f3fa58825f565e1.1582054578.git.christophe.leroy@c-s.fr
Signed-off-by: Greg Kroah-Hartman

powerpc/64: Setup a paca before parsing device tree etc.

2020-04-17T08:50:23+00:00

commit d4a8e98621543d5798421eed177978bf2b3cdd11 upstream.

Currently we set up the paca after parsing the device tree for CPU
features. Prior to that, r13 contains random data, which means there
is random data in r13 while we're running the generic dt parsing code.

This random data varies depending on whether we boot through a vmlinux
or a zImage: for the vmlinux case it's usually around zero, but for
zImages we see random values like 912a72603d420015.

This is poor practice, and can also lead to difficult-to-debug
crashes. For example, when kcov is enabled, the kcov instrumentation
attempts to read preempt_count out of the current task, which goes via
the paca. This then crashes in the zImage case.

Similarly stack protector can cause crashes if r13 is bogus, by
reading from the stack canary in the paca.

To resolve this:

 - move the paca setup to before the CPU feature parsing.

 - because we no longer have access to CPU feature flags in paca
 setup, change the HV feature test in the paca setup path to consider
 the actual value of the MSR rather than the CPU feature.

Translations get switched on once we leave early_setup, so I think
we'd already catch any other cases where the paca or task aren't set
up.

Boot tested on a P9 guest and host.

Fixes: fb0b0a73b223 ("powerpc: Enable kcov")
Fixes: 06ec27aea9fc ("powerpc/64: add stack protector support")
Cc: stable@vger.kernel.org # v4.20+
Reviewed-by: Andrew Donnellan 
Suggested-by: Michael Ellerman 
Signed-off-by: Daniel Axtens 
[mpe: Reword comments & change log a bit to mention stack protector]
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20200320032116.1024773-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman

powerpc/64/tm: Don't let userspace set regs->trap via sigreturn

2020-04-17T08:50:22+00:00

commit c7def7fbdeaa25feaa19caf4a27c5d10bd8789e4 upstream.

In restore_tm_sigcontexts() we take the trap value directly from the
user sigcontext with no checking:

	err |= __get_user(regs->trap, &sc->gp_regs[PT_TRAP]);

This means we can be in the kernel with an arbitrary regs->trap value.

Although that's not immediately problematic, there is a risk we could
trigger one of the uses of CHECK_FULL_REGS():

	#define CHECK_FULL_REGS(regs)	BUG_ON(regs->trap & 1)

It can also cause us to unnecessarily save non-volatile GPRs again in
save_nvgprs(), which shouldn't be problematic but is still wrong.

It's also possible it could trick the syscall restart machinery, which
relies on regs->trap not being == 0xc00 (see 9a81c16b5275 ("powerpc:
fix double syscall restarts")), though I haven't been able to make
that happen.

Finally it doesn't match the behaviour of the non-TM case, in
restore_sigcontext() which zeroes regs->trap.

So change restore_tm_sigcontexts() to zero regs->trap.

This was discovered while testing Nick's upcoming rewrite of the
syscall entry path. In that series the call to save_nvgprs() prior to
signal handling (do_notify_resume()) is removed, which leaves the
low-bit of regs->trap uncleared which can then trigger the FULL_REGS()
WARNs in setup_tm_sigcontexts().

Fixes: 2b0a576d15e0 ("powerpc: Add new transactional memory state to the signal context")
Cc: stable@vger.kernel.org # v3.9+
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20200401023836.3286664-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman

powerpc: Include .BTF section

2020-03-25T07:25:42+00:00

[ Upstream commit cb0cc635c7a9fa8a3a0f75d4d896721819c63add ]

Selecting CONFIG_DEBUG_INFO_BTF results in the below warning from ld:
  ld: warning: orphan section `.BTF' from `.btf.vmlinux.bin.o' being placed in section `.BTF'

Include .BTF section in vmlinux explicitly to fix the same.

Signed-off-by: Naveen N. Rao 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20200220113132.857132-1-naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Sasha Levin