linux-stable.git/arch/powerpc/kernel, branch v5.4

powerpc/prom_init: Undo relocation before entering secure mode

2019-10-29T04:12:17+00:00

The ultravisor will do an integrity check of the kernel image but we
relocated it so the check will fail. Restore the original image by
relocating it back to the kernel virtual base address.

This works because during build vmlinux is linked with an expected
virtual runtime address of KERNELBASE.

Fixes: 6a9c930bd775 ("powerpc/prom_init: Add the ESM call to prom_init")
Signed-off-by: Thiago Jung Bauermann 
Tested-by: Michael Anderson 
[mpe: Add IS_ENABLED() to fix the CONFIG_RELOCATABLE=n build]
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20190911163433.12822-1-bauerman@linux.ibm.com

powerpc/eeh: Fix eeh eeh_debugfs_break_device() with SRIOV devices

2019-09-26T23:04:17+00:00

s/CONFIG_IOV/CONFIG_PCI_IOV/

Whoops.

Fixes: bd6461cc7b3c ("powerpc/eeh: Add a eeh_dev_break debugfs interface")
Signed-off-by: Oliver O'Halloran 
[mpe: Fixup the #endif comment as well]
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20190926122502.14826-1-oohall@gmail.com

powerpc/mm: Fixup tlbie vs mtpidr/mtlpidr ordering issue on POWER9

2019-09-24T10:58:55+00:00

On POWER9, under some circumstances, a broadcast TLB invalidation will
fail to invalidate the ERAT cache on some threads when there are
parallel mtpidr/mtlpidr happening on other threads of the same core.
This can cause stores to continue to go to a page after it's unmapped.

The workaround is to force an ERAT flush using PID=0 or LPID=0 tlbie
flush. This additional TLB flush will cause the ERAT cache
invalidation. Since we are using PID=0 or LPID=0, we don't get
filtered out by the TLB snoop filtering logic.

We need to still follow this up with another tlbie to take care of
store vs tlbie ordering issue explained in commit:
a5d4b5891c2f ("powerpc/mm: Fixup tlbie vs store ordering issue on
POWER9"). The presence of ERAT cache implies we can still get new
stores and they may miss store queue marking flush.

Cc: stable@vger.kernel.org
Signed-off-by: Aneesh Kumar K.V 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20190924035254.24612-3-aneesh.kumar@linux.ibm.com

powerpc/book3s64/radix: Rename CPU_FTR_P9_TLBIE_BUG feature flag

2019-09-24T10:58:47+00:00

Rename the #define to indicate this is related to store vs tlbie
ordering issue. In the next patch, we will be adding another feature
flag that is used to handles ERAT flush vs tlbie ordering issue.

Fixes: a5d4b5891c2f ("powerpc/mm: Fixup tlbie vs store ordering issue on POWER9")
Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: Aneesh Kumar K.V 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20190924035254.24612-2-aneesh.kumar@linux.ibm.com

powerpc/book3s64/mm: Don't do tlbie fixup for some hardware revisions

2019-09-24T10:57:50+00:00

The store ordering vs tlbie issue mentioned in commit
a5d4b5891c2f ("powerpc/mm: Fixup tlbie vs store ordering issue on
POWER9") is fixed for Nimbus 2.3 and Cumulus 1.3 revisions. We don't
need to apply the fixup if we are running on them

We can only do this on PowerNV. On pseries guest with KVM we still
don't support redoing the feature fixup after migration. So we should
be enabling all the workarounds needed, because whe can possibly
migrate between DD 2.3 and DD 2.2

Fixes: a5d4b5891c2f ("powerpc/mm: Fixup tlbie vs store ordering issue on POWER9")
Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: Aneesh Kumar K.V 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20190924035254.24612-1-aneesh.kumar@linux.ibm.com

KVM: PPC: Book3S HV: use smp_mb() when setting/clearing host_ipi flag

2019-09-24T02:46:26+00:00

On a 2-socket Power9 system with 32 cores/128 threads (SMT4) and 1TB
of memory running the following guest configs:

  guest A:
    - 224GB of memory
    - 56 VCPUs (sockets=1,cores=28,threads=2), where:
      VCPUs 0-1 are pinned to CPUs 0-3,
      VCPUs 2-3 are pinned to CPUs 4-7,
      ...
      VCPUs 54-55 are pinned to CPUs 108-111

  guest B:
    - 4GB of memory
    - 4 VCPUs (sockets=1,cores=4,threads=1)

with the following workloads (with KSM and THP enabled in all):

  guest A:
    stress --cpu 40 --io 20 --vm 20 --vm-bytes 512M

  guest B:
    stress --cpu 4 --io 4 --vm 4 --vm-bytes 512M

  host:
    stress --cpu 4 --io 4 --vm 2 --vm-bytes 256M

the below soft-lockup traces were observed after an hour or so and
persisted until the host was reset (this was found to be reliably
reproducible for this configuration, for kernels 4.15, 4.18, 5.0,
and 5.3-rc5):

  [ 1253.183290] rcu: INFO: rcu_sched self-detected stall on CPU
  [ 1253.183319] rcu:     124-....: (5250 ticks this GP) idle=10a/1/0x4000000000000002 softirq=5408/5408 fqs=1941
  [ 1256.287426] watchdog: BUG: soft lockup - CPU#105 stuck for 23s! [CPU 52/KVM:19709]
  [ 1264.075773] watchdog: BUG: soft lockup - CPU#24 stuck for 23s! [worker:19913]
  [ 1264.079769] watchdog: BUG: soft lockup - CPU#31 stuck for 23s! [worker:20331]
  [ 1264.095770] watchdog: BUG: soft lockup - CPU#45 stuck for 23s! [worker:20338]
  [ 1264.131773] watchdog: BUG: soft lockup - CPU#64 stuck for 23s! [avocado:19525]
  [ 1280.408480] watchdog: BUG: soft lockup - CPU#124 stuck for 22s! [ksmd:791]
  [ 1316.198012] rcu: INFO: rcu_sched self-detected stall on CPU
  [ 1316.198032] rcu:     124-....: (21003 ticks this GP) idle=10a/1/0x4000000000000002 softirq=5408/5408 fqs=8243
  [ 1340.411024] watchdog: BUG: soft lockup - CPU#124 stuck for 22s! [ksmd:791]
  [ 1379.212609] rcu: INFO: rcu_sched self-detected stall on CPU
  [ 1379.212629] rcu:     124-....: (36756 ticks this GP) idle=10a/1/0x4000000000000002 softirq=5408/5408 fqs=14714
  [ 1404.413615] watchdog: BUG: soft lockup - CPU#124 stuck for 22s! [ksmd:791]
  [ 1442.227095] rcu: INFO: rcu_sched self-detected stall on CPU
  [ 1442.227115] rcu:     124-....: (52509 ticks this GP) idle=10a/1/0x4000000000000002 softirq=5408/5408 fqs=21403
  [ 1455.111787] INFO: task worker:19907 blocked for more than 120 seconds.
  [ 1455.111822]       Tainted: G             L    5.3.0-rc5-mdr-vanilla+ #1
  [ 1455.111833] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [ 1455.111884] INFO: task worker:19908 blocked for more than 120 seconds.
  [ 1455.111905]       Tainted: G             L    5.3.0-rc5-mdr-vanilla+ #1
  [ 1455.111925] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [ 1455.111966] INFO: task worker:20328 blocked for more than 120 seconds.
  [ 1455.111986]       Tainted: G             L    5.3.0-rc5-mdr-vanilla+ #1
  [ 1455.111998] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [ 1455.112048] INFO: task worker:20330 blocked for more than 120 seconds.
  [ 1455.112068]       Tainted: G             L    5.3.0-rc5-mdr-vanilla+ #1
  [ 1455.112097] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [ 1455.112138] INFO: task worker:20332 blocked for more than 120 seconds.
  [ 1455.112159]       Tainted: G             L    5.3.0-rc5-mdr-vanilla+ #1
  [ 1455.112179] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [ 1455.112210] INFO: task worker:20333 blocked for more than 120 seconds.
  [ 1455.112231]       Tainted: G             L    5.3.0-rc5-mdr-vanilla+ #1
  [ 1455.112242] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [ 1455.112282] INFO: task worker:20335 blocked for more than 120 seconds.
  [ 1455.112303]       Tainted: G             L    5.3.0-rc5-mdr-vanilla+ #1
  [ 1455.112332] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [ 1455.112372] INFO: task worker:20336 blocked for more than 120 seconds.
  [ 1455.112392]       Tainted: G             L    5.3.0-rc5-mdr-vanilla+ #1

CPUs 45, 24, and 124 are stuck on spin locks, likely held by
CPUs 105 and 31.

CPUs 105 and 31 are stuck in smp_call_function_many(), waiting on
target CPU 42. For instance:

  # CPU 105 registers (via xmon)
  R00 = c00000000020b20c   R16 = 00007d1bcd800000
  R01 = c00000363eaa7970   R17 = 0000000000000001
  R02 = c0000000019b3a00   R18 = 000000000000006b
  R03 = 000000000000002a   R19 = 00007d537d7aecf0
  R04 = 000000000000002a   R20 = 60000000000000e0
  R05 = 000000000000002a   R21 = 0801000000000080
  R06 = c0002073fb0caa08   R22 = 0000000000000d60
  R07 = c0000000019ddd78   R23 = 0000000000000001
  R08 = 000000000000002a   R24 = c00000000147a700
  R09 = 0000000000000001   R25 = c0002073fb0ca908
  R10 = c000008ffeb4e660   R26 = 0000000000000000
  R11 = c0002073fb0ca900   R27 = c0000000019e2464
  R12 = c000000000050790   R28 = c0000000000812b0
  R13 = c000207fff623e00   R29 = c0002073fb0ca808
  R14 = 00007d1bbee00000   R30 = c0002073fb0ca800
  R15 = 00007d1bcd600000   R31 = 0000000000000800
  pc  = c00000000020b260 smp_call_function_many+0x3d0/0x460
  cfar= c00000000020b270 smp_call_function_many+0x3e0/0x460
  lr  = c00000000020b20c smp_call_function_many+0x37c/0x460
  msr = 900000010288b033   cr  = 44024824
  ctr = c000000000050790   xer = 0000000000000000   trap =  100

CPU 42 is running normally, doing VCPU work:

  # CPU 42 stack trace (via xmon)
  [link register   ] c00800001be17188 kvmppc_book3s_radix_page_fault+0x90/0x2b0 [kvm_hv]
  [c000008ed3343820] c000008ed3343850 (unreliable)
  [c000008ed33438d0] c00800001be11b6c kvmppc_book3s_hv_page_fault+0x264/0xe30 [kvm_hv]
  [c000008ed33439d0] c00800001be0d7b4 kvmppc_vcpu_run_hv+0x8dc/0xb50 [kvm_hv]
  [c000008ed3343ae0] c00800001c10891c kvmppc_vcpu_run+0x34/0x48 [kvm]
  [c000008ed3343b00] c00800001c10475c kvm_arch_vcpu_ioctl_run+0x244/0x420 [kvm]
  [c000008ed3343b90] c00800001c0f5a78 kvm_vcpu_ioctl+0x470/0x7c8 [kvm]
  [c000008ed3343d00] c000000000475450 do_vfs_ioctl+0xe0/0xc70
  [c000008ed3343db0] c0000000004760e4 ksys_ioctl+0x104/0x120
  [c000008ed3343e00] c000000000476128 sys_ioctl+0x28/0x80
  [c000008ed3343e20] c00000000000b388 system_call+0x5c/0x70
  --- Exception: c00 (System Call) at 00007d545cfd7694
  SP (7d53ff7edf50) is in userspace

It was subsequently found that ipi_message[PPC_MSG_CALL_FUNCTION]
was set for CPU 42 by at least 1 of the CPUs waiting in
smp_call_function_many(), but somehow the corresponding
call_single_queue entries were never processed by CPU 42, causing the
callers to spin in csd_lock_wait() indefinitely.

Nick Piggin suggested something similar to the following sequence as
a possible explanation (interleaving of CALL_FUNCTION/RESCHEDULE
IPI messages seems to be most common, but any mix of CALL_FUNCTION and
!CALL_FUNCTION messages could trigger it):

    CPU
      X: smp_muxed_ipi_set_message():
      X:   smp_mb()
      X:   message[RESCHEDULE] = 1
      X: doorbell_global_ipi(42):
      X:   kvmppc_set_host_ipi(42, 1)
      X:   ppc_msgsnd_sync()/smp_mb()
      X:   ppc_msgsnd() -> 42
     42: doorbell_exception(): // from CPU X
     42:   ppc_msgsync()
    105: smp_muxed_ipi_set_message():
    105:   smb_mb()
         // STORE DEFERRED DUE TO RE-ORDERING
  --105:   message[CALL_FUNCTION] = 1
  | 105: doorbell_global_ipi(42):
  | 105:   kvmppc_set_host_ipi(42, 1)
  |  42:   kvmppc_set_host_ipi(42, 0)
  |  42: smp_ipi_demux_relaxed()
  |  42: // returns to executing guest
  |      // RE-ORDERED STORE COMPLETES
  ->105:   message[CALL_FUNCTION] = 1
    105:   ppc_msgsnd_sync()/smp_mb()
    105:   ppc_msgsnd() -> 42
     42: local_paca->kvm_hstate.host_ipi == 0 // IPI ignored
    105: // hangs waiting on 42 to process messages/call_single_queue

This can be prevented with an smp_mb() at the beginning of
kvmppc_set_host_ipi(), such that stores to message[] (or other
state indicated by the host_ipi flag) are ordered vs. the store to
to host_ipi.

However, doing so might still allow for the following scenario (not
yet observed):

    CPU
      X: smp_muxed_ipi_set_message():
      X:   smp_mb()
      X:   message[RESCHEDULE] = 1
      X: doorbell_global_ipi(42):
      X:   kvmppc_set_host_ipi(42, 1)
      X:   ppc_msgsnd_sync()/smp_mb()
      X:   ppc_msgsnd() -> 42
     42: doorbell_exception(): // from CPU X
     42:   ppc_msgsync()
         // STORE DEFERRED DUE TO RE-ORDERING
  -- 42:   kvmppc_set_host_ipi(42, 0)
  |  42: smp_ipi_demux_relaxed()
  | 105: smp_muxed_ipi_set_message():
  | 105:   smb_mb()
  | 105:   message[CALL_FUNCTION] = 1
  | 105: doorbell_global_ipi(42):
  | 105:   kvmppc_set_host_ipi(42, 1)
  |      // RE-ORDERED STORE COMPLETES
  -> 42:   kvmppc_set_host_ipi(42, 0)
     42: // returns to executing guest
    105:   ppc_msgsnd_sync()/smp_mb()
    105:   ppc_msgsnd() -> 42
     42: local_paca->kvm_hstate.host_ipi == 0 // IPI ignored
    105: // hangs waiting on 42 to process messages/call_single_queue

Fixing this scenario would require an smp_mb() *after* clearing
host_ipi flag in kvmppc_set_host_ipi() to order the store vs.
subsequent processing of IPI messages.

To handle both cases, this patch splits kvmppc_set_host_ipi() into
separate set/clear functions, where we execute smp_mb() prior to
setting host_ipi flag, and after clearing host_ipi flag. These
functions pair with each other to synchronize the sender and receiver
sides.

With that change in place the above workload ran for 20 hours without
triggering any lock-ups.

Fixes: 755563bc79c7 ("powerpc/powernv: Fixes for hypervisor doorbell handling") # v4.0
Signed-off-by: Michael Roth 
Acked-by: Paul Mackerras 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20190911223155.16045-1-mdroth@linux.vnet.ibm.com

powerpc/64s: Set reserved PCR bits

2019-09-20T22:36:53+00:00

Currently the reserved bits of the Processor Compatibility
Register (PCR) are cleared as per the Programming Note in Section
1.3.3 of version 3.0B of the Power ISA. This causes all new
architecture features to be made available when running on newer
processors with new architecture features added to the PCR as bits
must be set to disable a given feature.

For example to disable new features added as part of Version 2.07 of
the ISA the corresponding bit in the PCR needs to be set.

As new processor features generally require explicit kernel support
they should be disabled until such support is implemented. Therefore
kernels should set all unknown/reserved bits in the PCR such that any
new architecture features which the kernel does not currently know
about get disabled.

An update is planned to the ISA to clarify that the PCR is an
exception to the Programming Note on reserved bits in Section 1.3.3.

Signed-off-by: Alistair Popple 
Signed-off-by: Jordan Niethe 
Tested-by: Joel Stanley 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20190917004605.22471-2-alistair@popple.id.au

Merge tag 'powerpc-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2019-09-20T18:48:06+00:00

Pull powerpc updates from Michael Ellerman:
 "This is a bit late, partly due to me travelling, and partly due to a
  power outage knocking out some of my test systems *while* I was
  travelling.

   - Initial support for running on a system with an Ultravisor, which
     is software that runs below the hypervisor and protects guests
     against some attacks by the hypervisor.

   - Support for building the kernel to run as a "Secure Virtual
     Machine", ie. as a guest capable of running on a system with an
     Ultravisor.

   - Some changes to our DMA code on bare metal, to allow devices with
     medium sized DMA masks (> 32 && < 59 bits) to use more than 2GB of
     DMA space.

   - Support for firmware assisted crash dumps on bare metal (powernv).

   - Two series fixing bugs in and refactoring our PCI EEH code.

   - A large series refactoring our exception entry code to use gas
     macros, both to make it more readable and also enable some future
     optimisations.

  As well as many cleanups and other minor features & fixups.

  Thanks to: Adam Zerella, Alexey Kardashevskiy, Alistair Popple, Andrew
  Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anshuman Khandual,
  Balbir Singh, Benjamin Herrenschmidt, Cédric Le Goater, Christophe
  JAILLET, Christophe Leroy, Christopher M. Riedl, Christoph Hellwig,
  Claudio Carvalho, Daniel Axtens, David Gibson, David Hildenbrand,
  Desnes A. Nunes do Rosario, Ganesh Goudar, Gautham R. Shenoy, Greg
  Kurz, Guerney Hunt, Gustavo Romero, Halil Pasic, Hari Bathini, Joakim
  Tjernlund, Jonathan Neuschafer, Jordan Niethe, Leonardo Bras, Lianbo
  Jiang, Madhavan Srinivasan, Mahesh Salgaonkar, Mahesh Salgaonkar,
  Masahiro Yamada, Maxiwell S. Garcia, Michael Anderson, Nathan
  Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver
  O'Halloran, Qian Cai, Ram Pai, Ravi Bangoria, Reza Arbab, Ryan Grimm,
  Sam Bobroff, Santosh Sivaraj, Segher Boessenkool, Sukadev Bhattiprolu,
  Thiago Bauermann, Thiago Jung Bauermann, Thomas Gleixner, Tom
  Lendacky, Vasant Hegde"

* tag 'powerpc-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (264 commits)
  powerpc/mm/mce: Keep irqs disabled during lockless page table walk
  powerpc: Use ftrace_graph_ret_addr() when unwinding
  powerpc/ftrace: Enable HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
  ftrace: Look up the address of return_to_handler() using helpers
  powerpc: dump kernel log before carrying out fadump or kdump
  docs: powerpc: Add missing documentation reference
  powerpc/xmon: Fix output of XIVE IPI
  powerpc/xmon: Improve output of XIVE interrupts
  powerpc/mm/radix: remove useless kernel messages
  powerpc/fadump: support holes in kernel boot memory area
  powerpc/fadump: remove RMA_START and RMA_END macros
  powerpc/fadump: update documentation about option to release opalcore
  powerpc/fadump: consider f/w load area
  powerpc/opalcore: provide an option to invalidate /sys/firmware/opal/core file
  powerpc/opalcore: export /sys/firmware/opal/core for analysing opal crashes
  powerpc/fadump: update documentation about CONFIG_PRESERVE_FA_DUMP
  powerpc/fadump: add support to preserve crash data on FADUMP disabled kernel
  powerpc/fadump: improve how crashed kernel's memory is reserved
  powerpc/fadump: consider reserved ranges while releasing memory
  powerpc/fadump: make crash memory ranges array allocation generic
  ...

Merge tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2019-09-20T15:36:47+00:00

Pull Kbuild updates from Masahiro Yamada:

 - add modpost warn exported symbols marked as 'static' because 'static'
   and EXPORT_SYMBOL is an odd combination

 - break the build early if gold linker is used

 - optimize the Bison rule to produce .c and .h files by a single
   pattern rule

 - handle PREEMPT_RT in the module vermagic and UTS_VERSION

 - warn CONFIG options leaked to the user-space except existing ones

 - make single targets work properly

 - rebuild modules when module linker scripts are updated

 - split the module final link stage into scripts/Makefile.modfinal

 - fix the missed error code in merge_config.sh

 - improve the error message displayed on the attempt of the O= build in
   unclean source tree

 - remove 'clean-dirs' syntax

 - disable -Wimplicit-fallthrough warning for Clang

 - add CONFIG_CC_OPTIMIZE_FOR_SIZE_O3 for ARC

 - remove ARCH_{CPP,A,C}FLAGS variables

 - add $(BASH) to run bash scripts

 - change *CFLAGS_.o to take the relative path to $(obj)
   instead of the basename

 - stop suppressing Clang's -Wunused-function warnings when W=1

 - fix linux/export.h to avoid genksyms calculating CRC of trimmed
   exported symbols

 - misc cleanups

* tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (63 commits)
  genksyms: convert to SPDX License Identifier for lex.l and parse.y
  modpost: use __section in the output to *.mod.c
  modpost: use MODULE_INFO() for __module_depends
  export.h, genksyms: do not make genksyms calculate CRC of trimmed symbols
  export.h: remove defined(__KERNEL__), which is no longer needed
  kbuild: allow Clang to find unused static inline functions for W=1 build
  kbuild: rename KBUILD_ENABLE_EXTRA_GCC_CHECKS to KBUILD_EXTRA_WARN
  kbuild: refactor scripts/Makefile.extrawarn
  merge_config.sh: ignore unwanted grep errors
  kbuild: change *FLAGS_.o to take the path relative to $(obj)
  modpost: add NOFAIL to strndup
  modpost: add guid_t type definition
  kbuild: add $(BASH) to run scripts with bash-extension
  kbuild: remove ARCH_{CPP,A,C}FLAGS
  kbuild,arc: add CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3 for ARC
  kbuild: Do not enable -Wimplicit-fallthrough for clang for now
  kbuild: clean up subdir-ymn calculation in Makefile.clean
  kbuild: remove unneeded '+' marker from cmd_clean
  kbuild: remove clean-dirs syntax
  kbuild: check clean srctree even earlier
  ...

Merge tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping

2019-09-19T20:27:23+00:00

Pull dma-mapping updates from Christoph Hellwig:

 - add dma-mapping and block layer helpers to take care of IOMMU merging
   for mmc plus subsequent fixups (Yoshihiro Shimoda)

 - rework handling of the pgprot bits for remapping (me)

 - take care of the dma direct infrastructure for swiotlb-xen (me)

 - improve the dma noncoherent remapping infrastructure (me)

 - better defaults for ->mmap, ->get_sgtable and ->get_required_mask
   (me)

 - cleanup mmaping of coherent DMA allocations (me)

 - various misc cleanups (Andy Shevchenko, me)

* tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping: (41 commits)
  mmc: renesas_sdhi_internal_dmac: Add MMC_CAP2_MERGE_CAPABLE
  mmc: queue: Fix bigger segments usage
  arm64: use asm-generic/dma-mapping.h
  swiotlb-xen: merge xen_unmap_single into xen_swiotlb_unmap_page
  swiotlb-xen: simplify cache maintainance
  swiotlb-xen: use the same foreign page check everywhere
  swiotlb-xen: remove xen_swiotlb_dma_mmap and xen_swiotlb_dma_get_sgtable
  xen: remove the exports for xen_{create,destroy}_contiguous_region
  xen/arm: remove xen_dma_ops
  xen/arm: simplify dma_cache_maint
  xen/arm: use dev_is_dma_coherent
  xen/arm: consolidate page-coherent.h
  xen/arm: use dma-noncoherent.h calls for xen-swiotlb cache maintainance
  arm: remove wrappers for the generic dma remap helpers
  dma-mapping: introduce a dma_common_find_pages helper
  dma-mapping: always use VM_DMA_COHERENT for generic DMA remap
  vmalloc: lift the arm flag for coherent mappings to common code
  dma-mapping: provide a better default ->get_required_mask
  dma-mapping: remove the dma_declare_coherent_memory export
  remoteproc: don't allow modular build
  ...