Pull powerpc fixes from Michael Ellerman:
 "Four fixes, the first for code we merged this cycle and three that are
  also going to stable:

   - On 64-bit Book3E we were not placing the .text section where we
     said we would in the asm.

   - We broke building the boot wrapper on some 32-bit toolchains.

   - Lazy icache flushing was broken on pre-POWER5 machines.

   - One of the error paths in our EEH code would lead to a deadlock.

  Thanks to: Andrew Donnellan, Ben Hutchings, Benjamin Herrenschmidt,
  Nicholas Piggin"

* tag 'powerpc-4.9-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64: Fix placement of .text to be immediately following .head.text
  powerpc/eeh: Fix deadlock when PE frozen state can't be cleared
  powerpc/mm: Fix lazy icache flush on pre-POWER5
  powerpc/boot: Fix build failure in 32-bit boot wrapper

Do not introduce any additional alignment. Placement of text section
will be set by fixed section macros. Without this, output section
alignment defaults to 4096, which makes BookE text section start at
0x1000 when it is expected to start at 0x100.

This was introduced by commit 57f266497d81 ("powerpc: Use gas sections
for arranging exception vectors") and was caught with the scripted head
section checker (not yet merged).

Fixes: 57f266497d81 ("powerpc: Use gas sections for arranging exception vectors")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

In eeh_reset_device(), we take the pci_rescan_remove_lock immediately after
after we call eeh_reset_pe() to reset the PCI controller. We then call
eeh_clear_pe_frozen_state(), which can return an error. In this case, we
bail out of eeh_reset_device() without calling pci_unlock_rescan_remove().

Add a call to pci_unlock_rescan_remove() in the eeh_clear_pe_frozen_state()
error path so that we don't cause a deadlock later on.

Reported-by: Pradipta Ghosh <pradghos@in.ibm.com>
Fixes: 78954700631f ("powerpc/eeh: Avoid I/O access during PE reset")
Cc: stable@vger.kernel.org # v3.16+
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Pull powerpc fixes from Michael Ellerman:
 "Fixes marked for stable:
   - Set missing wakeup bit in LPCR on POWER9
   - Fix the early OPAL console wrappers
   - Fixup kernel read only mapping

  Fixes for code merged this cycle:
   - Fix missing CRCs, add more asm-prototypes.h declarations"

* tag 'powerpc-4.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm: Fixup kernel read only mapping
  powerpc/boot: Fix the early OPAL console wrappers
  powerpc: Fix missing CRCs, add more asm-prototypes.h declarations
  powerpc: Set missing wakeup bit in LPCR on POWER9

There is a new bit, LPCR_PECE_HVEE (Hypervisor Virtualization Exit
Enable), which controls wakeup from STOP states on Hypervisor
Virtualization Interrupts (which happen to also be all external
interrupts in host or bare metal mode).

It needs to be set or we will miss wakeups.

Fixes: 9baaef0a22c8 ("powerpc/irq: Add support for HV virtualization interrupts")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Rename it to HVEE to match the name in the ISA]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Pull powerpc fixes from Michael Ellerman:
 "Fixes marked for stable:
   - fix system reset interrupt winkle wakeups
   - fix setting of AIL in hypervisor mode

  Fixes for code merged this cycle:
   - fix exception vector build with 2.23 era binutils
   - fix missing update of HID register on secondary CPUs

  Other:
   - fix missing pr_cont()s
   - invalidate ERAT on tlbiel for POWER9 DD1"

* tag 'powerpc-4.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm: Fix missing update of HID register on secondary CPUs
  powerpc/mm/radix: Invalidate ERAT on tlbiel for POWER9 DD1
  powerpc/64: Fix setting of AIL in hypervisor mode
  powerpc/oops: Fix missing pr_cont()s in instruction dump
  powerpc/oops: Fix missing pr_cont()s in show_regs()
  powerpc/oops: Fix missing pr_cont()s in print_msr_bits() et. al.
  powerpc/oops: Fix missing pr_cont()s in show_stack()
  powerpc: Fix exception vector build with 2.23 era binutils
  powerpc/64s: Fix system reset interrupt winkle wakeups

Commit d3cbff1b5 "powerpc: Put exception configuration in a common place"
broke the setting of the AIL bit (which enables taking exceptions with
the MMU still on) on all processors, moving it incorrectly to a function
called only on the boot CPU. This was correct for the guest case but
not when running in hypervisor mode.

This fixes it by partially reverting that commit, putting the setting
back in cpu_ready_for_interrupts()

Fixes: d3cbff1b5a90 ("powerpc: Put exception configuration in a common place")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Since the KERN_CONT changes, the current code in show_instructions()
prints out a whole bunch of unnecessary newlines. Change occurrences of
printk("\n") to pr_cont("\n"). While we're here, change all the other
cases of printk(KERN_CONT ...) to pr_cont() as well.

Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Fix up our oops output by converting continuation lines to use
pr_cont(). Some of these are dubious, eg. printing a continuation line
which starts with a newline, but seem to work OK for now. This whole
function needs a rewrite in the next release.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Since the KERN_CONT changes these are being horribly split across lines,
for example:

    MSR: 8000000000009033 <
    SF,EE
    ,ME,IR
    ,DR,RI
    ,LE>

So fix it by using pr_cont() where appropriate.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>