linux-stable.git/arch/powerpc/kernel, branch linux-3.4.y

powerpc/rtas: Validate rtas.entry before calling enter_rtas()

2016-04-27T10:55:21+00:00

commit 8832317f662c06f5c06e638f57bfe89a71c9b266 upstream.

Currently we do not validate rtas.entry before calling enter_rtas(). This
leads to a kernel oops when user space calls rtas system call on a powernv
platform (see below). This patch adds code to validate rtas.entry before
making enter_rtas() call.

  Oops: Exception in kernel mode, sig: 4 [#1]
  SMP NR_CPUS=1024 NUMA PowerNV
  task: c000000004294b80 ti: c0000007e1a78000 task.ti: c0000007e1a78000
  NIP: 0000000000000000 LR: 0000000000009c14 CTR: c000000000423140
  REGS: c0000007e1a7b920 TRAP: 0e40   Not tainted  (3.18.17-340.el7_1.pkvm3_1_0.2400.1.ppc64le)
  MSR: 1000000000081000   CR: 00000000  XER: 00000000
  CFAR: c000000000009c0c SOFTE: 0
  NIP [0000000000000000]           (null)
  LR [0000000000009c14] 0x9c14
  Call Trace:
  [c0000007e1a7bba0] [c00000000041a7f4] avc_has_perm_noaudit+0x54/0x110 (unreliable)
  [c0000007e1a7bd80] [c00000000002ddc0] ppc_rtas+0x150/0x2d0
  [c0000007e1a7be30] [c000000000009358] syscall_exit+0x0/0x98

Fixes: 55190f88789a ("powerpc: Add skeleton PowerNV platform")
Reported-by: NAGESWARA R. SASTRY 
Signed-off-by: Vasant Hegde 
[mpe: Reword change log, trim oops, and add stable + fixes]
Signed-off-by: Michael Ellerman 
Signed-off-by: Zefan Li

powerpc/rtas: Introduce rtas_get_sensor_fast() for IRQ handlers

2016-04-27T10:55:14+00:00

commit 1c2cb594441d02815d304cccec9742ff5c707495 upstream.

The EPOW interrupt handler uses rtas_get_sensor(), which in turn
uses rtas_busy_delay() to wait for RTAS becoming ready in case it
is necessary. But rtas_busy_delay() is annotated with might_sleep()
and thus may not be used by interrupts handlers like the EPOW handler!
This leads to the following BUG when CONFIG_DEBUG_ATOMIC_SLEEP is
enabled:

 BUG: sleeping function called from invalid context at arch/powerpc/kernel/rtas.c:496
 in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: swapper/1
 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.2.0-rc2-thuth #6
 Call Trace:
 [c00000007ffe7b90] [c000000000807670] dump_stack+0xa0/0xdc (unreliable)
 [c00000007ffe7bc0] [c0000000000e1f14] ___might_sleep+0x134/0x180
 [c00000007ffe7c20] [c00000000002aec0] rtas_busy_delay+0x30/0xd0
 [c00000007ffe7c50] [c00000000002bde4] rtas_get_sensor+0x74/0xe0
 [c00000007ffe7ce0] [c000000000083264] ras_epow_interrupt+0x44/0x450
 [c00000007ffe7d90] [c000000000120260] handle_irq_event_percpu+0xa0/0x300
 [c00000007ffe7e70] [c000000000120524] handle_irq_event+0x64/0xc0
 [c00000007ffe7eb0] [c000000000124dbc] handle_fasteoi_irq+0xec/0x260
 [c00000007ffe7ef0] [c00000000011f4f0] generic_handle_irq+0x50/0x80
 [c00000007ffe7f20] [c000000000010f3c] __do_irq+0x8c/0x200
 [c00000007ffe7f90] [c0000000000236cc] call_do_irq+0x14/0x24
 [c00000007e6f39e0] [c000000000011144] do_IRQ+0x94/0x110
 [c00000007e6f3a30] [c000000000002594] hardware_interrupt_common+0x114/0x180

Fix this issue by introducing a new rtas_get_sensor_fast() function
that does not use rtas_busy_delay() - and thus can only be used for
sensors that do not cause a BUSY condition - known as "fast" sensors.

The EPOW sensor is defined to be "fast" in sPAPR - mpe.

Fixes: 587f83e8dd50 ("powerpc/pseries: Use rtas_get_sensor in RAS code")
Signed-off-by: Thomas Huth 
Reviewed-by: Nathan Fontenot 
Signed-off-by: Michael Ellerman 
Signed-off-by: Zefan Li

powerpc: Align TOC to 256 bytes

2015-09-18T01:20:41+00:00

commit 5e95235ccd5442d4a4fe11ec4eb99ba1b7959368 upstream.

Recent toolchains force the TOC to be 256 byte aligned. We need
to enforce this alignment in our linker script, otherwise pointers
to our TOC variables (__toc_start, __prom_init_toc_start) could
be incorrect.

If they are bad, we die a few hundred instructions into boot.

Signed-off-by: Anton Blanchard 
Signed-off-by: Michael Ellerman 
Signed-off-by: Zefan Li

powerpc: Fix missing L2 cache size in /sys/devices/system/cpu

2015-09-18T01:20:29+00:00

commit f7e9e358362557c3aa2c1ec47490f29fe880a09e upstream.

This problem appears to have been introduced in 2.6.29 by commit
93197a36a9c1 "Rewrite sysfs processor cache info code".

This caused lscpu to error out on at least e500v2 devices, eg:

  error: cannot open /sys/devices/system/cpu/cpu0/cache/index2/size: No such file or directory

Some embedded powerpc systems use cache-size in DTS for the unified L2
cache size, not d-cache-size, so we need to allow for both DTS names.
Added a new CACHE_TYPE_UNIFIED_D cache_type_info structure to handle
this.

Fixes: 93197a36a9c1 ("powerpc: Rewrite sysfs processor cache info code")
Signed-off-by: Dave Olson 
Signed-off-by: Michael Ellerman 
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li

PCI: Convert pcibios_resource_to_bus() to take a pci_bus, not a pci_dev

2015-06-19T03:40:34+00:00

commit fc2798502f860b18f3c7121e4dc659d3d9d28d74 upstream.

These interfaces:

  pcibios_resource_to_bus(struct pci_dev *dev, *bus_region, *resource)
  pcibios_bus_to_resource(struct pci_dev *dev, *resource, *bus_region)

took a pci_dev, but they really depend only on the pci_bus.  And we want to
use them in resource allocation paths where we have the bus but not a
device, so this patch converts them to take the pci_bus instead of the
pci_dev:

  pcibios_resource_to_bus(struct pci_bus *bus, *bus_region, *resource)
  pcibios_bus_to_resource(struct pci_bus *bus, *resource, *bus_region)

In fact, with standard PCI-PCI bridges, they only depend on the host
bridge, because that's the only place address translation occurs, but
we aren't going that far yet.

[bhelgaas: changelog]
Signed-off-by: Yinghai Lu 
Signed-off-by: Bjorn Helgaas 
Cc: Dirk Behme 
[lizf: Backported to 3.4:
 - make changes to pci_host_bridge() instead of find_pci_root_bus()
 - adjust context]
Signed-off-by: Zefan Li

powerpc: do_notify_resume can be called with bad thread_info flags argument

2015-02-02T09:05:10+00:00

commit 808be31426af57af22268ef0fcb42617beb3d15b upstream.

Back in 7230c5644188 ("powerpc: Rework lazy-interrupt handling") we
added a call out to restore_interrupts() (written in c) before calling
do_notify_resume:

        bl      restore_interrupts
        addi    r3,r1,STACK_FRAME_OVERHEAD
        bl      do_notify_resume

Unfortunately do_notify_resume takes two arguments, the second one
being the thread_info flags:

void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags)

We do populate r4 (the second argument) earlier, but
restore_interrupts() is free to muck it up all it wants. My guess is
the gcc compiler gods shone down on us and its register allocator
never used r4. Sometimes, rarely, luck is on our side.

LLVM on the other hand did trample r4.

Signed-off-by: Anton Blanchard 
Signed-off-by: Michael Ellerman 
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li

powerpc/sysfs: Disable writing to PURR in guest mode

2014-07-09T17:51:22+00:00

commit d1211af3049f4c9c1d8d4eb8f8098cc4f4f0d0c7 upstream.

arch/powerpc/kernel/sysfs.c exports PURR with write permission.
This may be valid for kernel in phyp mode. But writing to
the file in guest mode causes crash due to a priviledge violation

Signed-off-by: Madhavan Srinivasan 
Signed-off-by: Benjamin Herrenschmidt 
[Backported to 3.4: adjust context]
Signed-off-by: Yijing Wang 
Signed-off-by: Greg Kroah-Hartman

powerpc/pseries: Duplicate dtl entries sometimes sent to userspace

2014-07-09T17:51:22+00:00

commit 84b073868b9d9e754ae48b828337633d1b386482 upstream.

When reading from the dispatch trace log (dtl) userspace interface, I
sometimes see duplicate entries. One example:

# hexdump -C dtl.out

00000000  07 04 00 0c 00 00 48 44  00 00 00 00 00 00 00 00
00000010  00 0c a0 b4 16 83 6d 68  00 00 00 00 00 00 00 00
00000020  00 00 00 00 10 00 13 50  80 00 00 00 00 00 d0 32

00000030  07 04 00 0c 00 00 48 44  00 00 00 00 00 00 00 00
00000040  00 0c a0 b4 16 83 6d 68  00 00 00 00 00 00 00 00
00000050  00 00 00 00 10 00 13 50  80 00 00 00 00 00 d0 32

The problem is in scan_dispatch_log() where we call dtl_consumer()
but bail out before incrementing the index.

To fix this I moved dtl_consumer() after the timebase comparison.

Signed-off-by: Anton Blanchard 
Signed-off-by: Benjamin Herrenschmidt 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings 
Cc: Yijing Wang 
Signed-off-by: Greg Kroah-Hartman

powerpc/pseries/lparcfg: Fix possible overflow are more than 1026

2014-07-09T17:51:21+00:00

commit 5676005acf26ab7e924a8438ea4746e47d405762 upstream.

need set '\0' for 'local_buffer'.

SPLPAR_MAXLENGTH is 1026, RTAS_DATA_BUF_SIZE is 4096. so the contents of
rtas_data_buf may truncated in memcpy.

if contents are really truncated.
  the splpar_strlen is more than 1026. the next while loop checking will
  not find the end of buffer. that will cause memory access violation.

Signed-off-by: Chen Gang 
Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Ben Hutchings 
Cc: Yijing Wang 
Signed-off-by: Greg Kroah-Hartman

powerpc: Don't Oops when accessing /proc/powerpc/lparcfg without hypervisor

2014-07-09T17:51:21+00:00

commit f5f6cbb61610b7bf9d9d96db9c3979d62a424bab upstream.

/proc/powerpc/lparcfg is an ancient facility (though still actively used)
which allows access to some informations relative to the partition when
running underneath a PAPR compliant hypervisor.

It makes no sense on non-pseries machines. However, currently, not only
can it be created on these if the kernel has pseries support, but accessing
it on such a machine will crash due to trying to do hypervisor calls.

In fact, it should also not do HV calls on older pseries that didn't have
an hypervisor either.

Finally, it has the plumbing to be a module but is a "bool" Kconfig option.

This fixes the whole lot by turning it into a machine_device_initcall
that is only created on pseries, and adding the necessary hypervisor
check before calling the H_GET_EM_PARMS hypercall

Signed-off-by: Benjamin Herrenschmidt 
[bwh: Backported to 3.2: lparcfg_cleanup() was a bit different]
Signed-off-by: Ben Hutchings 
Cc: Yijing Wang 
Signed-off-by: Greg Kroah-Hartman