linux-stable.git/arch/powerpc/kernel/time.c, branch v3.8

powerpc: Max next_tb to prevent from replaying timer interrupt

2013-01-28T23:18:16+00:00

With lazy interrupt, we always call __check_irq_replaysome with
decrementers_next_tb to check if we need to replay timer interrupt.
So in hotplug case we also need to set decrementers_next_tb as MAX
to make sure __check_irq_replay don't replay timer interrupt
when return as we expect, otherwise we'll trap here infinitely.

Signed-off-by: Tiejun Chen 
Signed-off-by: Benjamin Herrenschmidt

powerpc/vdso: Remove redundant locking in update_vsyscall_tz()

2013-01-03T05:45:51+00:00

The locking in update_vsyscall_tz() is not only unnecessary because the vdso
code copies the data unproteced in __kernel_gettimeofday() but also
introduces a hard to reproduce race condition between update_vsyscall()
and update_vsyscall_tz(), which causes user space process to loop
forever in vdso code.

The following patch removes the locking from update_vsyscall_tz().

Locking is not only unnecessary because the vdso code copies the data
unprotected in __kernel_gettimeofday() but also erroneous because updating
the tb_update_count is not atomic and introduces a hard to reproduce race
condition between update_vsyscall() and update_vsyscall_tz(), which further
causes user space process to loop forever in vdso code.

The below scenario describes the race condition,
x==0	Boot CPU			other CPU
	proc_P: x==0
	    timer interrupt
		update_vsyscall
x==1		    x++;sync		settimeofday
					    update_vsyscall_tz
x==2						x++;sync
x==3		    sync;x++
						sync;x++
	proc_P: x==3 (loops until x becomes even)

Because the ++ operator would be implemented as three instructions and not
atomic on powerpc.

A similar change was made for x86 in commit 6c260d58634
("x86: vdso: Remove bogus locking in update_vsyscall_tz")

Signed-off-by: Shan Hai 
CC: 
Signed-off-by: Benjamin Herrenschmidt

vtime: Warn if irqs aren't disabled on system time accounting APIs

2012-11-20T14:42:51+00:00

System time accounting APIs such as vtime_account_system() and
vtime_account_idle() need to be irqsafe. Current callers include
irq entry, exit and kvm, all of which have been checked against that
requirement. Now it's better to grow that with an automatic check
in case we have further callers or we missed something.

Suggested-by: Steven Rostedt 
Signed-off-by: Frederic Weisbecker 
Cc: Peter Zijlstra 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: Steven Rostedt 
Cc: Paul Gortmaker 
Cc: Tony Luck 
Cc: Fenghua Yu 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: Martin Schwidefsky 
Cc: Heiko Carstens

vtime: Consolidate a bit the ctx switch code

2012-11-19T15:41:32+00:00

On ia64 and powerpc, vtime context switch only consists
in flushing system and user pending time, plus a few
arch housekeeping.

Consolidate that into a generic implementation. s390 is
a special case because pending user and system time accounting
there is hard to dissociate. So it's keeping its own implementation.

Signed-off-by: Frederic Weisbecker 
Reviewed-by: Steven Rostedt 
Cc: Peter Zijlstra 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: Steven Rostedt 
Cc: Paul Gortmaker 
Cc: Tony Luck 
Cc: Fenghua Yu 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: Martin Schwidefsky 
Cc: Heiko Carstens

vtime: Explicitly account pending user time on process tick

2012-11-19T15:41:21+00:00

All vtime implementations just flush the user time on process
tick. Consolidate that in generic code by calling a user time
accounting helper. This avoids an indirect call in ia64 and
prepare to also consolidate vtime context switch code.

Signed-off-by: Frederic Weisbecker 
Reviewed-by: Steven Rostedt 
Cc: Peter Zijlstra 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: Steven Rostedt 
Cc: Paul Gortmaker 
Cc: Tony Luck 
Cc: Fenghua Yu 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: Martin Schwidefsky 
Cc: Heiko Carstens

vtime: Remove the underscore prefix invasion

2012-11-19T15:40:16+00:00

Prepending irq-unsafe vtime APIs with underscores was actually
a bad idea as the result is a big mess in the API namespace that
is even waiting to be further extended. Also these helpers
are always called from irq safe callers except kvm. Just
provide a vtime_account_system_irqsafe() for this specific
case so that we can remove the underscore prefix on other
vtime functions.

Signed-off-by: Frederic Weisbecker 
Reviewed-by: Steven Rostedt 
Cc: Peter Zijlstra 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: Steven Rostedt 
Cc: Paul Gortmaker 
Cc: Tony Luck 
Cc: Fenghua Yu 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: Martin Schwidefsky 
Cc: Heiko Carstens

vtime: Make vtime_account_system() irqsafe

2012-10-29T20:31:31+00:00

vtime_account_system() currently has only one caller with
vtime_account() which is irq safe.

Now we are going to call it from other places like kvm where
irqs are not always disabled by the time we account the cputime.

So let's make it irqsafe. The arch implementation part is now
prefixed with "__".

vtime_account_idle() arch implementation is prefixed accordingly
to stay consistent.

Signed-off-by: Frederic Weisbecker 
Cc: Peter Zijlstra 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: Steven Rostedt 
Cc: Paul Gortmaker 
Cc: Tony Luck 
Cc: Fenghua Yu 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: Martin Schwidefsky 
Cc: Heiko Carstens

Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2012-10-12T13:17:48+00:00

Pull timer core update from Thomas Gleixner:
 - Bug fixes (one for a longstanding dead loop issue)
 - Rework of time related vsyscalls
 - Alarm timer updates
 - Jiffies updates to remove compile time dependencies

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timekeeping: Cast raw_interval to u64 to avoid shift overflow
  timers: Fix endless looping between cascade() and internal_add_timer()
  time/jiffies: bring back unconditional LATCH definition
  time: Convert x86_64 to using new update_vsyscall
  time: Only do nanosecond rounding on GENERIC_TIME_VSYSCALL_OLD systems
  time: Introduce new GENERIC_TIME_VSYSCALL
  time: Convert CONFIG_GENERIC_TIME_VSYSCALL to CONFIG_GENERIC_TIME_VSYSCALL_OLD
  time: Move update_vsyscall definitions to timekeeper_internal.h
  time: Move timekeeper structure to timekeeper_internal.h for vsyscall changes
  jiffies: Remove compile time assumptions about CLOCK_TICK_RATE
  jiffies: Kill unused TICK_USEC_TO_NSEC
  alarmtimer: Rename alarmtimer_remove to alarmtimer_dequeue
  alarmtimer: Remove unused helpers & defines
  alarmtimer: Use hrtimer per-alarm instead of per-base
  alarmtimer: Implement minimum alarm interval for allowing suspend

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

2012-10-05T18:16:12+00:00

Pull powerpc updates from Benjamin Herrenschmidt:
 "Some highlights in addition to the usual batch of fixes:

   - 64TB address space support for 64-bit processes by Aneesh Kumar

   - Gavin Shan did a major cleanup & re-organization of our EEH support
     code (IBM fancy PCI error handling & recovery infrastructure) which
     paves the way for supporting different platform backends, along
     with some rework of the PCIe code for the PowerNV platform in order
     to remove home made resource allocations and instead use the
     generic code (which is possible after some small improvements to it
     done by Gavin).

   - Uprobes support by Ananth N Mavinakayanahalli

   - A pile of embedded updates from Freescale folks, including new SoC
     and board supports, more KVM stuff including preparing for 64-bit
     BookE KVM support, ePAPR 1.1 updates, etc..."

Fixup trivial conflicts in drivers/scsi/ipr.c

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (146 commits)
  powerpc/iommu: Fix multiple issues with IOMMU pools code
  powerpc: Fix VMX fix for memcpy case
  driver/mtd:IFC NAND:Initialise internal SRAM before any write
  powerpc/fsl-pci: use 'Header Type' to identify PCIE mode
  powerpc/eeh: Don't release eeh_mutex in eeh_phb_pe_get
  powerpc: Remove tlb batching hack for nighthawk
  powerpc: Set paca->data_offset = 0 for boot cpu
  powerpc/perf: Sample only if SIAR-Valid bit is set in P7+
  powerpc/fsl-pci: fix warning when CONFIG_SWIOTLB is disabled
  powerpc/mpc85xx: Update interrupt handling for IFC controller
  powerpc/85xx: Enable USB support in p1023rds_defconfig
  powerpc/smp: Do not disable IPI interrupts during suspend
  powerpc/eeh: Fix crash on converting OF node to edev
  powerpc/eeh: Lock module while handling EEH event
  powerpc/kprobe: Don't emulate store when kprobe stwu r1
  powerpc/kprobe: Complete kprobe and migrate exception frame
  powerpc/kprobe: Introduce a new thread flag
  powerpc: Remove unused __get_user64() and __put_user64()
  powerpc/eeh: Global mutex to protect PE tree
  powerpc/eeh: Remove EEH PE for normal PCI hotplug
  ...

Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2012-10-01T17:43:39+00:00

Pull scheduler changes from Ingo Molnar:
 "Continued quest to clean up and enhance the cputime code by Frederic
  Weisbecker, in preparation for future tickless kernel features.

  Other than that, smallish changes."

Fix up trivial conflicts due to additions next to each other in arch/{x86/}Kconfig

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  cputime: Make finegrained irqtime accounting generally available
  cputime: Gather time/stats accounting config options into a single menu
  ia64: Reuse system and user vtime accounting functions on task switch
  ia64: Consolidate user vtime accounting
  vtime: Consolidate system/idle context detection
  cputime: Use a proper subsystem naming for vtime related APIs
  sched: cpu_power: enable ARCH_POWER
  sched/nohz: Clean up select_nohz_load_balancer()
  sched: Fix load avg vs. cpu-hotplug
  sched: Remove __ARCH_WANT_INTERRUPTS_ON_CTXSW
  sched: Fix nohz_idle_balance()
  sched: Remove useless code in yield_to()
  sched: Add time unit suffix to sched sysctl knobs
  sched/debug: Limit sd->*_idx range on sysctl
  sched: Remove AFFINE_WAKEUPS feature flag
  s390: Remove leftover account_tick_vtime() header
  cputime: Consolidate vtime handling on context switch
  sched: Move cputime code to its own file
  cputime: Generalize CONFIG_VIRT_CPU_ACCOUNTING
  tile: Remove SD_PREFER_LOCAL leftover
  ...