linux-stable.git/arch/powerpc/kernel/process.c, branch v5.12.2 Linux kernel stable tree Merge tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-block 2021-02-27T16:29:02+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-02-27T16:29:02+00:00 5695e51619745d4fe3ec2506a2f0cd982c5e27a4 Pull io_uring thread rewrite from Jens Axboe: "This converts the io-wq workers to be forked off the tasks in question instead of being kernel threads that assume various bits of the original task identity. This kills > 400 lines of code from io_uring/io-wq, and it's the worst part of the code. We've had several bugs in this area, and the worry is always that we could be missing some pieces for file types doing unusual things (recent /dev/tty example comes to mind, userfaultfd reads installing file descriptors is another fun one... - both of which need special handling, and I bet it's not the last weird oddity we'll find). With these identical workers, we can have full confidence that we're never missing anything. That, in itself, is a huge win. Outside of that, it's also more efficient since we're not wasting space and code on tracking state, or switching between different states. I'm sure we're going to find little things to patch up after this series, but testing has been pretty thorough, from the usual regression suite to production. Any issue that may crop up should be manageable. There's also a nice series of further reductions we can do on top of this, but I wanted to get the meat of it out sooner rather than later. The general worry here isn't that it's fundamentally broken. Most of the little issues we've found over the last week have been related to just changes in how thread startup/exit is done, since that's the main difference between using kthreads and these kinds of threads. In fact, if all goes according to plan, I want to get this into the 5.10 and 5.11 stable branches as well. That said, the changes outside of io_uring/io-wq are: - arch setup, simple one-liner to each arch copy_thread() implementation. - Removal of net and proc restrictions for io_uring, they are no longer needed or useful" * tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-block: (30 commits) io-wq: remove now unused IO_WQ_BIT_ERROR io_uring: fix SQPOLL thread handling over exec io-wq: improve manager/worker handling over exec io_uring: ensure SQPOLL startup is triggered before error shutdown io-wq: make buffered file write hashed work map per-ctx io-wq: fix race around io_worker grabbing io-wq: fix races around manager/worker creation and task exit io_uring: ensure io-wq context is always destroyed for tasks arch: ensure parisc/powerpc handle PF_IO_WORKER in copy_thread() io_uring: cleanup ->user usage io-wq: remove nr_process accounting io_uring: flag new native workers with IORING_FEAT_NATIVE_WORKERS net: remove cmsg restriction from io_uring based send/recvmsg calls Revert "proc: don't allow async path resolution of /proc/self components" Revert "proc: don't allow async path resolution of /proc/thread-self components" io_uring: move SQPOLL thread io-wq forked worker io-wq: make io_wq_fork_thread() available to other users io-wq: only remove worker from free_list, if it was there io_uring: remove io_identity io_uring: remove any grabbing of context ... 
Pull io_uring thread rewrite from Jens Axboe:
 "This converts the io-wq workers to be forked off the tasks in question
  instead of being kernel threads that assume various bits of the
  original task identity.

  This kills > 400 lines of code from io_uring/io-wq, and it's the worst
  part of the code. We've had several bugs in this area, and the worry
  is always that we could be missing some pieces for file types doing
  unusual things (recent /dev/tty example comes to mind, userfaultfd
  reads installing file descriptors is another fun one... - both of
  which need special handling, and I bet it's not the last weird oddity
  we'll find).

  With these identical workers, we can have full confidence that we're
  never missing anything. That, in itself, is a huge win. Outside of
  that, it's also more efficient since we're not wasting space and code
  on tracking state, or switching between different states.

  I'm sure we're going to find little things to patch up after this
  series, but testing has been pretty thorough, from the usual
  regression suite to production. Any issue that may crop up should be
  manageable.

  There's also a nice series of further reductions we can do on top of
  this, but I wanted to get the meat of it out sooner rather than later.
  The general worry here isn't that it's fundamentally broken. Most of
  the little issues we've found over the last week have been related to
  just changes in how thread startup/exit is done, since that's the main
  difference between using kthreads and these kinds of threads. In fact,
  if all goes according to plan, I want to get this into the 5.10 and
  5.11 stable branches as well.

  That said, the changes outside of io_uring/io-wq are:

   - arch setup, simple one-liner to each arch copy_thread()
     implementation.

   - Removal of net and proc restrictions for io_uring, they are no
     longer needed or useful"

* tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-block: (30 commits)
  io-wq: remove now unused IO_WQ_BIT_ERROR
  io_uring: fix SQPOLL thread handling over exec
  io-wq: improve manager/worker handling over exec
  io_uring: ensure SQPOLL startup is triggered before error shutdown
  io-wq: make buffered file write hashed work map per-ctx
  io-wq: fix race around io_worker grabbing
  io-wq: fix races around manager/worker creation and task exit
  io_uring: ensure io-wq context is always destroyed for tasks
  arch: ensure parisc/powerpc handle PF_IO_WORKER in copy_thread()
  io_uring: cleanup ->user usage
  io-wq: remove nr_process accounting
  io_uring: flag new native workers with IORING_FEAT_NATIVE_WORKERS
  net: remove cmsg restriction from io_uring based send/recvmsg calls
  Revert "proc: don't allow async path resolution of /proc/self components"
  Revert "proc: don't allow async path resolution of /proc/thread-self components"
  io_uring: move SQPOLL thread io-wq forked worker
  io-wq: make io_wq_fork_thread() available to other users
  io-wq: only remove worker from free_list, if it was there
  io_uring: remove io_identity
  io_uring: remove any grabbing of context
  ...
arch: ensure parisc/powerpc handle PF_IO_WORKER in copy_thread() 2021-02-24T03:33:33+00:00 Jens Axboe axboe@kernel.dk 2021-02-23T18:57:20+00:00 0100e6bbdbb79404e56939313662b42737026574 In the arch addition of PF_IO_WORKER, I missed parisc and powerpc for some reason. Fix that up, ensuring they handle PF_IO_WORKER like they do PF_KTHREAD in copy_thread(). Reported-by: Bruno Goncalves <bgoncalv@redhat.com> Fixes: 4727dc20e042 ("arch: setup PF_IO_WORKER threads like PF_KTHREAD") Signed-off-by: Jens Axboe <axboe@kernel.dk> 
In the arch addition of PF_IO_WORKER, I missed parisc and powerpc for
some reason. Fix that up, ensuring they handle PF_IO_WORKER like they do
PF_KTHREAD in copy_thread().

Reported-by: Bruno Goncalves <bgoncalv@redhat.com>
Fixes: 4727dc20e042 ("arch: setup PF_IO_WORKER threads like PF_KTHREAD")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
powerpc/64: Fix stack trace not displaying final frame 2021-02-11T12:35:14+00:00 Michael Ellerman mpe@ellerman.id.au 2021-02-09T13:59:20+00:00 e3de1e291fa58a1ab0f471a4b458eff2514e4b5f In commit bf13718bc57a ("powerpc: show registers when unwinding interrupt frames") we changed our stack dumping logic to show the full registers whenever we find an interrupt frame on the stack. However we didn't notice that on 64-bit this doesn't show the final frame, ie. the interrupt that brought us in from userspace, whereas on 32-bit it does. That is due to confusion about the size of that last frame. The code in show_stack() calls validate_sp(), passing it STACK_INT_FRAME_SIZE to check the sp is at least that far below the top of the stack. However on 64-bit that size is too large for the final frame, because it includes the red zone, but we don't allocate a red zone for the first frame. So add a new define that encodes the correct size for 32-bit and 64-bit, and use it in show_stack(). This results in the full trace being shown on 64-bit, eg: sysrq: Trigger a crash Kernel panic - not syncing: sysrq triggered crash CPU: 0 PID: 83 Comm: sh Not tainted 5.11.0-rc2-gcc-8.2.0-00188-g571abcb96b10-dirty #649 Call Trace: [c00000000a1c3ac0] [c000000000897b70] dump_stack+0xc4/0x114 (unreliable) [c00000000a1c3b00] [c00000000014334c] panic+0x178/0x41c [c00000000a1c3ba0] [c00000000094e600] sysrq_handle_crash+0x40/0x50 [c00000000a1c3c00] [c00000000094ef98] __handle_sysrq+0xd8/0x210 [c00000000a1c3ca0] [c00000000094f820] write_sysrq_trigger+0x100/0x188 [c00000000a1c3ce0] [c0000000005559dc] proc_reg_write+0x10c/0x1b0 [c00000000a1c3d10] [c000000000479950] vfs_write+0xf0/0x360 [c00000000a1c3d60] [c000000000479d9c] ksys_write+0x7c/0x140 [c00000000a1c3db0] [c00000000002bf5c] system_call_exception+0x19c/0x2c0 [c00000000a1c3e10] [c00000000000d35c] system_call_common+0xec/0x278 --- interrupt: c00 at 0x7fff9fbab428 NIP: 00007fff9fbab428 LR: 000000001000b724 CTR: 0000000000000000 REGS: c00000000a1c3e80 TRAP: 0c00 Not tainted (5.11.0-rc2-gcc-8.2.0-00188-g571abcb96b10-dirty) MSR: 900000000280f033 <SF,HV,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE> CR: 22002884 XER: 00000000 IRQMASK: 0 GPR00: 0000000000000004 00007fffc3cb8960 00007fff9fc59900 0000000000000001 GPR04: 000000002a4b32d0 0000000000000002 0000000000000063 0000000000000063 GPR08: 000000002a4b32d0 0000000000000000 0000000000000000 0000000000000000 GPR12: 0000000000000000 00007fff9fcca9a0 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 00000000100b8fd0 GPR20: 000000002a4b3485 00000000100b8f90 0000000000000000 0000000000000000 GPR24: 000000002a4b0440 00000000100e77b8 0000000000000020 000000002a4b32d0 GPR28: 0000000000000001 0000000000000002 000000002a4b32d0 0000000000000001 NIP [00007fff9fbab428] 0x7fff9fbab428 LR [000000001000b724] 0x1000b724 --- interrupt: c00 Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210209141627.2898485-1-mpe@ellerman.id.au 
In commit bf13718bc57a ("powerpc: show registers when unwinding
interrupt frames") we changed our stack dumping logic to show the full
registers whenever we find an interrupt frame on the stack.

However we didn't notice that on 64-bit this doesn't show the final
frame, ie. the interrupt that brought us in from userspace, whereas on
32-bit it does.

That is due to confusion about the size of that last frame. The code
in show_stack() calls validate_sp(), passing it STACK_INT_FRAME_SIZE
to check the sp is at least that far below the top of the stack.

However on 64-bit that size is too large for the final frame, because
it includes the red zone, but we don't allocate a red zone for the
first frame.

So add a new define that encodes the correct size for 32-bit and
64-bit, and use it in show_stack().

This results in the full trace being shown on 64-bit, eg:

  sysrq: Trigger a crash
  Kernel panic - not syncing: sysrq triggered crash
  CPU: 0 PID: 83 Comm: sh Not tainted 5.11.0-rc2-gcc-8.2.0-00188-g571abcb96b10-dirty #649
  Call Trace:
  [c00000000a1c3ac0] [c000000000897b70] dump_stack+0xc4/0x114 (unreliable)
  [c00000000a1c3b00] [c00000000014334c] panic+0x178/0x41c
  [c00000000a1c3ba0] [c00000000094e600] sysrq_handle_crash+0x40/0x50
  [c00000000a1c3c00] [c00000000094ef98] __handle_sysrq+0xd8/0x210
  [c00000000a1c3ca0] [c00000000094f820] write_sysrq_trigger+0x100/0x188
  [c00000000a1c3ce0] [c0000000005559dc] proc_reg_write+0x10c/0x1b0
  [c00000000a1c3d10] [c000000000479950] vfs_write+0xf0/0x360
  [c00000000a1c3d60] [c000000000479d9c] ksys_write+0x7c/0x140
  [c00000000a1c3db0] [c00000000002bf5c] system_call_exception+0x19c/0x2c0
  [c00000000a1c3e10] [c00000000000d35c] system_call_common+0xec/0x278
  --- interrupt: c00 at 0x7fff9fbab428
  NIP:  00007fff9fbab428 LR: 000000001000b724 CTR: 0000000000000000
  REGS: c00000000a1c3e80 TRAP: 0c00   Not tainted  (5.11.0-rc2-gcc-8.2.0-00188-g571abcb96b10-dirty)
  MSR:  900000000280f033 <SF,HV,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE>  CR: 22002884  XER: 00000000
  IRQMASK: 0
  GPR00: 0000000000000004 00007fffc3cb8960 00007fff9fc59900 0000000000000001
  GPR04: 000000002a4b32d0 0000000000000002 0000000000000063 0000000000000063
  GPR08: 000000002a4b32d0 0000000000000000 0000000000000000 0000000000000000
  GPR12: 0000000000000000 00007fff9fcca9a0 0000000000000000 0000000000000000
  GPR16: 0000000000000000 0000000000000000 0000000000000000 00000000100b8fd0
  GPR20: 000000002a4b3485 00000000100b8f90 0000000000000000 0000000000000000
  GPR24: 000000002a4b0440 00000000100e77b8 0000000000000020 000000002a4b32d0
  GPR28: 0000000000000001 0000000000000002 000000002a4b32d0 0000000000000001
  NIP [00007fff9fbab428] 0x7fff9fbab428
  LR [000000001000b724] 0x1000b724
  --- interrupt: c00

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210209141627.2898485-1-mpe@ellerman.id.au
powerpc/64: Make stack tracing work during very early boot 2021-02-08T14:10:16+00:00 Michael Ellerman mpe@ellerman.id.au 2021-02-02T13:02:06+00:00 0ecf6a9e47d825b7dddfebca738386b809e59a94 If we try to stack trace very early during boot, either due to a WARN/BUG or manual dump_stack(), we will oops in valid_emergency_stack() when we try to dereference the paca_ptrs array. The fix is simple, we just return false if paca_ptrs isn't allocated yet. The stack pointer definitely isn't part of any emergency stack because we haven't allocated any yet. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210202130207.1303975-1-mpe@ellerman.id.au 
If we try to stack trace very early during boot, either due to a
WARN/BUG or manual dump_stack(), we will oops in
valid_emergency_stack() when we try to dereference the paca_ptrs
array.

The fix is simple, we just return false if paca_ptrs isn't allocated
yet. The stack pointer definitely isn't part of any emergency stack
because we haven't allocated any yet.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210202130207.1303975-1-mpe@ellerman.id.au
powerpc: convert interrupt handlers to use wrappers 2021-02-08T13:02:12+00:00 Nicholas Piggin npiggin@gmail.com 2021-01-30T13:08:38+00:00 3a96570ffceb15c6ed9cc6f990f172dcdc8ac279 Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210130130852.2952424-29-npiggin@gmail.com 
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210130130852.2952424-29-npiggin@gmail.com
powerpc: do_break get registers from regs 2021-02-08T13:02:09+00:00 Nicholas Piggin npiggin@gmail.com 2021-01-30T13:08:18+00:00 18722ecf9efdc6a7ca933a3e5a83cc9dba375847 Similar to the previous patch this makes interrupt handler function types more regular so they can be wrapped with the next patch. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210130130852.2952424-9-npiggin@gmail.com 
Similar to the previous patch this makes interrupt handler function
types more regular so they can be wrapped with the next patch.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210130130852.2952424-9-npiggin@gmail.com
powerpc/process: Remove target specific __set_dabr() 2020-12-09T06:01:40+00:00 Christophe Leroy christophe.leroy@csgroup.eu 2020-12-04T10:12:51+00:00 ad3ed15cd04b96de7c38204ba7c698cbccd8fe88 __set_dabr() are simple functions that can be inline directly inside set_dabr() and using IS_ENABLED() instead of #ifdef Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/c10b263668e137236c71d76648b03cf2cd1ee66f.1607076733.git.christophe.leroy@csgroup.eu 
__set_dabr() are simple functions that can be inline directly
inside set_dabr() and using IS_ENABLED() instead of #ifdef

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c10b263668e137236c71d76648b03cf2cd1ee66f.1607076733.git.christophe.leroy@csgroup.eu
powerpc/book3s64/pkeys: Don't update SPRN_AMR when in kernel mode. 2020-12-03T14:01:26+00:00 Aneesh Kumar K.V aneesh.kumar@linux.ibm.com 2020-11-27T04:44:16+00:00 48a8ab4eeb8271f2a0e2ca3cf80844a59acca153 Now that kernel correctly store/restore userspace AMR/IAMR values, avoid manipulating AMR and IAMR from the kernel on behalf of userspace. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201127044424.40686-15-aneesh.kumar@linux.ibm.com 
Now that kernel correctly store/restore userspace AMR/IAMR values, avoid
manipulating AMR and IAMR from the kernel on behalf of userspace.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201127044424.40686-15-aneesh.kumar@linux.ibm.com
powerpc/book3s64/pkeys: Reset userspace AMR correctly on exec 2020-12-03T14:01:26+00:00 Aneesh Kumar K.V aneesh.kumar@linux.ibm.com 2020-11-27T04:44:14+00:00 d5fa30e6993ffcdd1859d8dab1a07a6f6c6e7c3f On fork, we inherit from the parent and on exec, we should switch to default_amr values. Also, avoid changing the AMR register value within the kernel. The kernel now runs with different AMR values. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201127044424.40686-13-aneesh.kumar@linux.ibm.com 
On fork, we inherit from the parent and on exec, we should switch to default_amr values.

Also, avoid changing the AMR register value within the kernel. The kernel now runs with
different AMR values.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201127044424.40686-13-aneesh.kumar@linux.ibm.com
powerpc/book3s64/pkeys: Inherit correctly on fork. 2020-12-03T14:01:25+00:00 Aneesh Kumar K.V aneesh.kumar@linux.ibm.com 2020-11-27T04:44:13+00:00 f643fcab74c005ddfdda68c69909f03bde766ff1 Child thread.kuap value is inherited from the parent in copy_thread_tls. We still need to make sure when the child returns from a fork in the kernel we start with the kernel default AMR value. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201127044424.40686-12-aneesh.kumar@linux.ibm.com 
Child thread.kuap value is inherited from the parent in copy_thread_tls. We still
need to make sure when the child returns from a fork in the kernel we start with the kernel
default AMR value.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201127044424.40686-12-aneesh.kumar@linux.ibm.com