linux-stable.git/arch/powerpc/kernel/entry_64.S, branch linux-3.19.y

powerpc/ftrace: simplify prepare_ftrace_return

2014-11-09T22:59:28+00:00

Instead of passing in the stack address of the link register
to be modified, just pass in the old value and return the
new value and rely on ftrace_graph_caller to do the
modification.

This removes the exception handling around the stack update -
it isn't needed and we weren't consistent about it. Later on
we would do an unprotected modification:

       if (!ftrace_graph_entry(&trace)) {
               *parent = old;

Signed-off-by: Anton Blanchard 
Signed-off-by: Michael Ellerman

powerpc/ftrace: Remove mod_return_to_handler

2014-11-09T22:59:27+00:00

mod_return_to_handler is the same as return_to_handler, except
it handles the change of the TOC (r2). Add this into
return_to_handler and remove mod_return_to_handler.

Signed-off-by: Anton Blanchard 
Signed-off-by: Michael Ellerman

powerpc: do_notify_resume can be called with bad thread_info flags argument

2014-10-31T05:52:46+00:00

Back in 7230c5644188 ("powerpc: Rework lazy-interrupt handling") we
added a call out to restore_interrupts() (written in c) before calling
do_notify_resume:

        bl      restore_interrupts
        addi    r3,r1,STACK_FRAME_OVERHEAD
        bl      do_notify_resume

Unfortunately do_notify_resume takes two arguments, the second one
being the thread_info flags:

void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags)

We do populate r4 (the second argument) earlier, but
restore_interrupts() is free to muck it up all it wants. My guess is
the gcc compiler gods shone down on us and its register allocator
never used r4. Sometimes, rarely, luck is on our side.

LLVM on the other hand did trample r4.

Signed-off-by: Anton Blanchard 
Cc: stable@vger.kernel.org
Signed-off-by: Michael Ellerman

powerpc/book3s: Add basic infrastructure to handle HMI in Linux.

2014-08-05T06:33:48+00:00

Handle Hypervisor Maintenance Interrupt (HMI) in Linux. This patch implements
basic infrastructure to handle HMI in Linux host. The design is to invoke
opal handle hmi in real mode for recovery and set irq_pending when we hit HMI.
During check_irq_replay pull opal hmi event and print hmi info on console.

Signed-off-by: Mahesh Salgaonkar 
Signed-off-by: Benjamin Herrenschmidt

powerpc: Remove MMU_FTR_SLB

2014-07-28T04:10:23+00:00

We now only support cpus that use an SLB, so we don't need an MMU
feature to indicate that.

Signed-off-by: Michael Ellerman 
Signed-off-by: Benjamin Herrenschmidt

powerpc: Correct DSCR during TM context switch

2014-06-11T07:02:56+00:00

Correct the DSCR SPR becoming temporarily corrupted if a task is
context switched during a transaction.

The problem occurs while suspending the task and is caused by saving
the DSCR to thread.dscr after it has already been set to the CPU's
default value:

__switch_to() calls __switch_to_tm()
	which calls tm_reclaim_task()
	which calls tm_reclaim_thread()
	which calls tm_reclaim()
		where the DSCR is set to the CPU's default
__switch_to() calls _switch()
		where thread.dscr is set to the DSCR

When the task is resumed, it's transaction will be doomed (as usual)
and the DSCR SPR will be corrupted, although the checkpointed value
will be correct. Therefore the DSCR will be immediately corrected by
the transaction aborting, unless it has been suspended. In that case
the incorrect value can be seen by the task until it resumes the
transaction.

The fix is to treat the DSCR similarly to the TAR and save it early
in __switch_to().

A program exposing the problem is added to the kernel self tests as:
tools/testing/selftests/powerpc/tm/tm-resched-dscr.

Signed-off-by: Sam Bobroff 
CC:  [v3.10+]
Signed-off-by: Benjamin Herrenschmidt

powerpc: Fix regression of per-CPU DSCR setting

2014-05-28T03:35:40+00:00

Since commit "efcac65 powerpc: Per process DSCR + some fixes (try#4)"
it is no longer possible to set the DSCR on a per-CPU basis.

The old behaviour was to minipulate the DSCR SPR directly but this is no
longer sufficient: the value is quickly overwritten by context switching.

This patch stores the per-CPU DSCR value in a kernel variable rather than
directly in the SPR and it is used whenever a process has not set the DSCR
itself. The sysfs interface (/sys/devices/system/cpu/cpuN/dscr) is unchanged.

Writes to the old global default (/sys/devices/system/cpu/dscr_default)
now set all of the per-CPU values and reads return the last written value.

The new per-CPU default is added to the paca_struct and is used everywhere
outside of sysfs.c instead of the old global default.

Signed-off-by: Sam Bobroff 
Signed-off-by: Benjamin Herrenschmidt

powerpc: ftrace_caller, _mcount is exported to modules so needs _GLOBAL_TOC()

2014-04-23T00:05:33+00:00

When testing the ftrace function tracer, I realised that ftrace_caller
and mcount are called from modules and they both call into C, therefore
they need the ABIv2 global entry point to establish r2.

Signed-off-by: Anton Blanchard

powerpc: Fix kernel thread creation on ABIv2

2014-04-23T00:05:23+00:00

Change how we setup registers for ret_from_kernel_thread. In
ABIv1, instead of passing a function descriptor in, dereference
it and pass the target in directly.

Use ppc_global_function_entry to get it right on both ABIv1 and ABIv2.

Signed-off-by: Anton Blanchard

powerpc: ABIv2 function calls must place target address in r12

2014-04-23T00:05:20+00:00

To establish addressability quickly, ABIv2 requires the target
address of the function being called to be in r12. Fix a number of
places in assembly code that we do indirect function calls.

We need to avoid function descriptors on ABIv2 too.

Signed-off-by: Anton Blanchard