Pull IOMMU updates from Joerg Roedel:

 - Page table code for AMD IOMMU now supports large pages where smaller
   page-sizes were mapped before. VFIO had to work around that in the
   past and I included a patch to remove it (acked by Alex Williamson)

 - Patches to unmodularize a couple of IOMMU drivers that would never
   work as modules anyway.

 - Work to unify the the iommu-related pointers in 'struct device' into
   one pointer. This work is not finished yet, but will probably be in
   the next cycle.

 - NUMA aware allocation in iommu-dma code

 - Support for r8a774a1 and r8a774c0 in the Renesas IOMMU driver

 - Scalable mode support for the Intel VT-d driver

 - PM runtime improvements for the ARM-SMMU driver

 - Support for the QCOM-SMMUv2 IOMMU hardware from Qualcom

 - Various smaller fixes and improvements

* tag 'iommu-updates-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (78 commits)
  iommu: Check for iommu_ops == NULL in iommu_probe_device()
  ACPI/IORT: Don't call iommu_ops->add_device directly
  iommu/of: Don't call iommu_ops->add_device directly
  iommu: Consolitate ->add/remove_device() calls
  iommu/sysfs: Rename iommu_release_device()
  dmaengine: sh: rcar-dmac: Use device_iommu_mapped()
  xhci: Use device_iommu_mapped()
  powerpc/iommu: Use device_iommu_mapped()
  ACPI/IORT: Use device_iommu_mapped()
  iommu/of: Use device_iommu_mapped()
  driver core: Introduce device_iommu_mapped() function
  iommu/tegra: Use helper functions to access dev->iommu_fwspec
  iommu/qcom: Use helper functions to access dev->iommu_fwspec
  iommu/of: Use helper functions to access dev->iommu_fwspec
  iommu/mediatek: Use helper functions to access dev->iommu_fwspec
  iommu/ipmmu-vmsa: Use helper functions to access dev->iommu_fwspec
  iommu/dma: Use helper functions to access dev->iommu_fwspec
  iommu/arm-smmu: Use helper functions to access dev->iommu_fwspec
  ACPI/IORT: Use helper functions to access dev->iommu_fwspec
  iommu: Introduce wrappers around dev->iommu_fwspec
  ...

Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE
for debugfs files.

Semantic patch information:
Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file()
imposes some significant overhead as compared to
DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe().

Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Use the new function to replace the open-coded iommu check.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Russell Currey <ruscur@russell.cc>
Cc: Sam Bobroff <sbobroff@linux.ibm.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

The wait_state member of eeh_ops does not need to be platform
dependent; it's just logic around eeh_ops.get_state(). Therefore,
merge the two (slightly different!) platform versions into a new
function, eeh_wait_state() and remove the eeh_ops member.

While doing this, also correct:
* The wait logic, so that it never waits longer than max_wait.
* The wait logic, so that it never waits less than
  EEH_STATE_MIN_WAIT_TIME.
* One call site where the result is treated like a bit field before
  it's checked for negative error values.
* In pseries_eeh_get_state(), rename the "state" parameter to "delay"
  because that's what it is.

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Currently, eeh_pe_state_mark() marks a PE (and it's children) with a
state and then performs additional processing if that state included
EEH_PE_ISOLATED.

The state parameter is always a constant at the call site, so
rearrange eeh_pe_state_mark() into two functions and just call the
appropriate one at each site.

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The function eeh_pe_state_mark_with_cfg() just performs the work of
eeh_pe_state_mark() and then, conditionally, the work of
eeh_pe_state_clear(). However it is only ever called with a constant
state such that the condition is always true, so replace it by direct
calls.

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Currently a flag, EEH_POSTPONED_PROBE, is used to prevent an incorrect
message "EEH: No capable adapters found" from being displayed during
the boot of powernv systems.

It is necessary because, on powernv, the call to eeh_probe_devices()
made from eeh_init() is too early and EEH can't yet be enabled. A
second call is made later from eeh_pnv_post_init(), which succeeds.

(On pseries, the first call succeeds because PCI devices are set up
early enough and no second call is made.)

This can be simplified by moving the early call to eeh_probe_devices()
from eeh_init() (where it's seen by both platforms) to
pSeries_final_fixup(), so that each platform only calls
eeh_probe_devices() once, at a point where it can succeed.
This is slightly later in the boot sequence, but but still early
enough and it is now in the same place in the sequence for both
platforms (the pcibios_fixup hook).

The display of the message can be cleaned up as well, by moving it
into eeh_probe_devices().

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

If an error occurs during an unplug operation, it's possible for
eeh_dump_dev_log() to be called when edev->pdn is null, which
currently leads to dereferencing a null pointer.

Handle this by skipping the error log for those devices.

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Due to recent refactoring in EEH in:
commit b9fde58db7e5 ("powerpc/powernv: Rework EEH initialization on
powernv")
a misleading message was seen in the kernel message buffer:

[    0.108431] EEH: PowerNV platform initialized
[    0.589979] EEH: No capable adapters found

This happened due to the removal of the initialization delay for powernv
platform.

Even though the EEH infrastructure for the devices is eventually
initialized and still works just fine the eeh device probe step is
postponed in order to assure the PEs are created. Later
pnv_eeh_post_init does the probe devices job but at that point the
message was already shown right after eeh_init flow.

This patch introduces a new flag EEH_POSTPONED_PROBE to represent that
temporary state and avoid the message mentioned above and showing the
follow one instead:

[    0.107724] EEH: PowerNV platform initialized
[    4.844825] EEH: PCI Enhanced I/O Error Handling Enabled

Signed-off-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com>
Acked-by: Russell Currey <ruscur@russell.cc>
Tested-by:Venkat Rao B <vrbagal1@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Pull powerpc updates from Michael Ellerman:
 "Notable changes:

   - Support for split PMD page table lock on 64-bit Book3S (Power8/9).

   - Add support for HAVE_RELIABLE_STACKTRACE, so we properly support
     live patching again.

   - Add support for patching barrier_nospec in copy_from_user() and
     syscall entry.

   - A couple of fixes for our data breakpoints on Book3S.

   - A series from Nick optimising TLB/mm handling with the Radix MMU.

   - Numerous small cleanups to squash sparse/gcc warnings from Mathieu
     Malaterre.

   - Several series optimising various parts of the 32-bit code from
     Christophe Leroy.

   - Removal of support for two old machines, "SBC834xE" and "C2K"
     ("GEFanuc,C2K"), which is why the diffstat has so many deletions.

  And many other small improvements & fixes.

  There's a few out-of-area changes. Some minor ftrace changes OK'ed by
  Steve, and a fix to our powernv cpuidle driver. Then there's a series
  touching mm, x86 and fs/proc/task_mmu.c, which cleans up some details
  around pkey support. It was ack'ed/reviewed by Ingo & Dave and has
  been in next for several weeks.

  Thanks to: Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Al
  Viro, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd
  Bergmann, Balbir Singh, Cédric Le Goater, Christophe Leroy, Christophe
  Lombard, Colin Ian King, Dave Hansen, Fabio Estevam, Finn Thain,
  Frederic Barrat, Gautham R. Shenoy, Haren Myneni, Hari Bathini, Ingo
  Molnar, Jonathan Neuschäfer, Josh Poimboeuf, Kamalesh Babulal,
  Madhavan Srinivasan, Mahesh Salgaonkar, Mark Greer, Mathieu Malaterre,
  Matthew Wilcox, Michael Neuling, Michal Suchanek, Naveen N. Rao,
  Nicholas Piggin, Nicolai Stange, Olof Johansson, Paul Gortmaker, Paul
  Mackerras, Peter Rosin, Pridhiviraj Paidipeddi, Ram Pai, Rashmica
  Gupta, Ravi Bangoria, Russell Currey, Sam Bobroff, Samuel
  Mendoza-Jonas, Segher Boessenkool, Shilpasri G Bhat, Simon Guo,
  Souptick Joarder, Stewart Smith, Thiago Jung Bauermann, Torsten Duwe,
  Vaibhav Jain, Wei Yongjun, Wolfram Sang, Yisheng Xie, YueHaibing"

* tag 'powerpc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (251 commits)
  powerpc/64s/radix: Fix missing ptesync in flush_cache_vmap
  cpuidle: powernv: Fix promotion from snooze if next state disabled
  powerpc: fix build failure by disabling attribute-alias warning in pci_32
  ocxl: Fix missing unlock on error in afu_ioctl_enable_p9_wait()
  powerpc-opal: fix spelling mistake "Uniterrupted" -> "Uninterrupted"
  powerpc: fix spelling mistake: "Usupported" -> "Unsupported"
  powerpc/pkeys: Detach execute_only key on !PROT_EXEC
  powerpc/powernv: copy/paste - Mask SO bit in CR
  powerpc: Remove core support for Marvell mv64x60 hostbridges
  powerpc/boot: Remove core support for Marvell mv64x60 hostbridges
  powerpc/boot: Remove support for Marvell mv64x60 i2c controller
  powerpc/boot: Remove support for Marvell MPSC serial controller
  powerpc/embedded6xx: Remove C2K board support
  powerpc/lib: optimise PPC32 memcmp
  powerpc/lib: optimise 32 bits __clear_user()
  powerpc/time: inline arch_vtime_task_switch()
  powerpc/Makefile: set -mcpu=860 flag for the 8xx
  powerpc: Implement csum_ipv6_magic in assembly
  powerpc/32: Optimise __csum_partial()
  powerpc/lib: Adjust .balign inside string functions for PPC32
  ...