linux-stable.git/arch/powerpc/kernel/Makefile, branch v4.8

powerpc: move hmi.c to arch/powerpc/kvm/

2016-08-22T01:09:33+00:00

hmi.c functions are unused unless sibling_subcore_state is nonzero, and
that in turn happens only if KVM is in use.  So move the code to
arch/powerpc/kvm/, putting it under CONFIG_KVM_BOOK3S_HV_POSSIBLE
rather than CONFIG_PPC_BOOK3S_64.  The sibling_subcore_state is also
included in struct paca_struct only if KVM is supported by the kernel.

Cc: Daniel Axtens 
Cc: Michael Ellerman 
Cc: Mahesh Salgaonkar 
Cc: Paul Mackerras 
Cc: linuxppc-dev@lists.ozlabs.org
Cc: kvm-ppc@vger.kernel.org
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini 
Signed-off-by: Benjamin Herrenschmidt

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2016-08-02T20:11:27+00:00

Pull KVM updates from Paolo Bonzini:

 - ARM: GICv3 ITS emulation and various fixes.  Removal of the
   old VGIC implementation.

 - s390: support for trapping software breakpoints, nested
   virtualization (vSIE), the STHYI opcode, initial extensions
   for CPU model support.

 - MIPS: support for MIPS64 hosts (32-bit guests only) and lots
   of cleanups, preliminary to this and the upcoming support for
   hardware virtualization extensions.

 - x86: support for execute-only mappings in nested EPT; reduced
   vmexit latency for TSC deadline timer (by about 30%) on Intel
   hosts; support for more than 255 vCPUs.

 - PPC: bugfixes.

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (302 commits)
  KVM: PPC: Introduce KVM_CAP_PPC_HTM
  MIPS: Select HAVE_KVM for MIPS64_R{2,6}
  MIPS: KVM: Reset CP0_PageMask during host TLB flush
  MIPS: KVM: Fix ptr->int cast via KVM_GUEST_KSEGX()
  MIPS: KVM: Sign extend MFC0/RDHWR results
  MIPS: KVM: Fix 64-bit big endian dynamic translation
  MIPS: KVM: Fail if ebase doesn't fit in CP0_EBase
  MIPS: KVM: Use 64-bit CP0_EBase when appropriate
  MIPS: KVM: Set CP0_Status.KX on MIPS64
  MIPS: KVM: Make entry code MIPS64 friendly
  MIPS: KVM: Use kmap instead of CKSEG0ADDR()
  MIPS: KVM: Use virt_to_phys() to get commpage PFN
  MIPS: Fix definition of KSEGX() for 64-bit
  KVM: VMX: Add VMCS to CPU's loaded VMCSs before VMPTRLD
  kvm: x86: nVMX: maintain internal copy of current VMCS
  KVM: PPC: Book3S HV: Save/restore TM state in H_CEDE
  KVM: PPC: Book3S HV: Pull out TM state save/restore into separate procedures
  KVM: arm64: vgic-its: Simplify MAPI error handling
  KVM: arm64: vgic-its: Make vgic_its_cmd_handle_mapi similar to other handlers
  KVM: arm64: vgic-its: Turn device_id validation into generic ID validation
  ...

powerpc/32: Remove RELOCATABLE_PPC32

2016-07-19T10:17:07+00:00

It is seldom used in the kernel code and can be easily replaced by
either RELOCATABLE or PPC32. So there is no reason to keep a separate
kernel option for this.

Signed-off-by: Kevin Hao 
Signed-off-by: Michael Ellerman

powerpc/powernv: Rename idle_power7.S to idle_book3s.S

2016-07-15T10:18:39+00:00

idle_power7.S handles idle entry/exit for POWER7, POWER8 and in next
patch for POWER9. Rename the file to a non-hardware specific
name.

Reviewed-by: Gautham R. Shenoy 
Signed-off-by: Shreyas B. Prabhu 
Signed-off-by: Michael Ellerman

KVM: PPC: Book3S HV: Fix TB corruption in guest exit path on HMI interrupt

2016-06-20T04:11:25+00:00

When a guest is assigned to a core it converts the host Timebase (TB)
into guest TB by adding guest timebase offset before entering into
guest. During guest exit it restores the guest TB to host TB. This means
under certain conditions (Guest migration) host TB and guest TB can differ.

When we get an HMI for TB related issues the opal HMI handler would
try fixing errors and restore the correct host TB value. With no guest
running, we don't have any issues. But with guest running on the core
we run into TB corruption issues.

If we get an HMI while in the guest, the current HMI handler invokes opal
hmi handler before forcing guest to exit. The guest exit path subtracts
the guest TB offset from the current TB value which may have already
been restored with host value by opal hmi handler. This leads to incorrect
host and guest TB values.

With split-core, things become more complex. With split-core, TB also gets
split and each subcore gets its own TB register. When a hmi handler fixes
a TB error and restores the TB value, it affects all the TB values of
sibling subcores on the same core. On TB errors all the thread in the core
gets HMI. With existing code, the individual threads call opal hmi handle
independently which can easily throw TB out of sync if we have guest
running on subcores. Hence we will need to co-ordinate with all the
threads before making opal hmi handler call followed by TB resync.

This patch introduces a sibling subcore state structure (shared by all
threads in the core) in paca which holds information about whether sibling
subcores are in Guest mode or host mode. An array in_guest[] of size
MAX_SUBCORE_PER_CORE=4 is used to maintain the state of each subcore.
The subcore id is used as index into in_guest[] array. Only primary
thread entering/exiting the guest is responsible to set/unset its
designated array element.

On TB error, we get HMI interrupt on every thread on the core. Upon HMI,
this patch will now force guest to vacate the core/subcore. Primary
thread from each subcore will then turn off its respective bit
from the above bitmap during the guest exit path just after the
guest->host partition switch is complete.

All other threads that have just exited the guest OR were already in host
will wait until all other subcores clears their respective bit.
Once all the subcores turn off their respective bit, all threads will
will make call to opal hmi handler.

It is not necessary that opal hmi handler would resync the TB value for
every HMI interrupts. It would do so only for the HMI caused due to
TB errors. For rest, it would not touch TB value. Hence to make things
simpler, primary thread would call TB resync explicitly once for each
core immediately after opal hmi handler instead of subtracting guest
offset from TB. TB resync call will restore the TB with host value.
Thus we can be sure about the TB state.

One of the primary threads exiting the guest will take up the
responsibility of calling TB resync. It will use one of the top bits
(bit 63) from subcore state flags bitmap to make the decision. The first
primary thread (among the subcores) that is able to set the bit will
have to call the TB resync. Rest all other threads will wait until TB
resync is complete.  Once TB resync is complete all threads will then
proceed.

Signed-off-by: Mahesh Salgaonkar 
Signed-off-by: Paul Mackerras

powerpc/ftrace: Use $(CC_FLAGS_FTRACE) when disabling ftrace

2016-03-07T03:53:55+00:00

Rather than open-coding -pg whereever we want to disable ftrace, use the
existing $(CC_FLAGS_FTRACE) variable.

This has the advantage that it will work in future when we use a
different set of flags to enable ftrace.

Signed-off-by: Torsten Duwe 
Signed-off-by: Michael Ellerman

powerpc: enable UBSAN support

2016-01-21T01:09:18+00:00

This hooks up UBSAN support for PowerPC.

So far it's found some interesting cases where we don't properly sanitise
input to shifts, including one in our futex handling.  Nothing critical,
but interesting and worth fixing.

[valentinrothberg@gmail.com: arch/powerpc/Kconfig: fix typo in select statement]
Signed-off-by: Daniel Axtens 
Cc: Andrey Ryabinin 
Cc: Benjamin Herrenschmidt 
Tested-by: Andrew Donnellan 
Acked-by: Michael Ellerman 
Signed-off-by: Valentin Rothberg 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

powerpc/ftrace: add powerpc timebase as a trace clock source

2015-08-06T06:36:23+00:00

Add a new powerpc-specific trace clock using the timebase register,
similar to x86-tsc. This gives us
- a fast, monotonic, hardware clock source for trace entries, and
- a clock that can be used to correlate events across cpus as well as across
  hypervisor and guests.

Signed-off-by: Naveen N. Rao 
Acked-by: Steven Rostedt 
Signed-off-by: Michael Ellerman

Merge tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux

2015-07-02T02:40:18+00:00

Pull devicetree updates from Grant Likely:
 "A whole lot of bug fixes.

  Nothing stands out here except the ability to enable CONFIG_OF on
  every architecture, and an import of a newer version of dtc"

* tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux: (22 commits)
  of/irq: Rename "intc_desc" to "of_intc_desc" to fix OF on sh
  of/irq: Fix pSeries boot failure
  Documentation: DT: Fix a typo in the filename "lantiq,-pinumx.txt"
  of: define of_find_node_by_phandle for !CONFIG_OF
  of/address: use atomic allocation in pci_register_io_range()
  of: Add vendor prefix for Zodiac Inflight Innovations
  dt/fdt: add empty versions of early_init_dt_*_memory_arch
  of: clean-up unnecessary libfdt include paths
  of: make unittest select OF_EARLY_FLATTREE instead of depend on it
  of: make CONFIG_OF user selectable
  MIPS: prepare for user enabling of CONFIG_OF
  of/fdt: fix argument name and add comments of unflatten_dt_node()
  of: return NUMA_NO_NODE from fallback of_node_to_nid()
  tps6507x.txt: Remove executable permission
  of/overlay: Grammar s/an negative/a negative/
  of/fdt: Make fdt blob input parameters of unflatten functions const
  of: add helper function to retrive match data
  of: Grammar s/property exist/property exists/
  of: Move OF flags to be visible even when !CONFIG_OF
  scripts/dtc: Update to upstream version 9d3649bd3be245c9
  ...

of: clean-up unnecessary libfdt include paths

2015-06-05T01:16:47+00:00

With the libfdt include fixups to use "" instead of <> in the
latest dtc import in commit 4760597 (scripts/dtc: Update to upstream
version 9d3649bd3be245c9), it is no longer necessary to add explicit
include paths to use libfdt. Remove these across the kernel.

Signed-off-by: Rob Herring 
Acked-by: Ralf Baechle 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Acked-by: Michael Ellerman 
Acked-by: Grant Likely 
Cc: linux-mips@linux-mips.org
Cc: linuxppc-dev@lists.ozlabs.org