<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/arch/powerpc/include, branch v4.8.2</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>KVM: PPC: Book3s PR: Allow access to unprivileged MMCR2 register</title>
<updated>2016-10-16T16:03:39+00:00</updated>
<author>
<name>Thomas Huth</name>
<email>thuth@redhat.com</email>
</author>
<published>2016-09-21T13:06:45+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=759896fa82e0e26ed7c048434723565f5d74ee04'/>
<id>759896fa82e0e26ed7c048434723565f5d74ee04</id>
<content type='text'>
commit fa73c3b25bd8d0d393dc6109a1dba3c2aef0451e upstream.

The MMCR2 register is available twice, one time with number 785
(privileged access), and one time with number 769 (unprivileged,
but it can be disabled completely). In former times, the Linux
kernel was using the unprivileged register 769 only, but since
commit 8dd75ccb571f3c92c ("powerpc: Use privileged SPR number
for MMCR2"), it uses the privileged register 785 instead.
The KVM-PR code then of course also switched to use the SPR 785,
but this is causing older guest kernels to crash, since these
kernels still access 769 instead. So to support older kernels
with KVM-PR again, we have to support register 769 in KVM-PR, too.

Fixes: 8dd75ccb571f3c92c48014b3dabd3d51a115ab41
Signed-off-by: Thomas Huth &lt;thuth@redhat.com&gt;
Signed-off-by: Paul Mackerras &lt;paulus@ozlabs.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit fa73c3b25bd8d0d393dc6109a1dba3c2aef0451e upstream.

The MMCR2 register is available twice, one time with number 785
(privileged access), and one time with number 769 (unprivileged,
but it can be disabled completely). In former times, the Linux
kernel was using the unprivileged register 769 only, but since
commit 8dd75ccb571f3c92c ("powerpc: Use privileged SPR number
for MMCR2"), it uses the privileged register 785 instead.
The KVM-PR code then of course also switched to use the SPR 785,
but this is causing older guest kernels to crash, since these
kernels still access 769 instead. So to support older kernels
with KVM-PR again, we have to support register 769 in KVM-PR, too.

Fixes: 8dd75ccb571f3c92c48014b3dabd3d51a115ab41
Signed-off-by: Thomas Huth &lt;thuth@redhat.com&gt;
Signed-off-by: Paul Mackerras &lt;paulus@ozlabs.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'powerpc-4.8-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux</title>
<updated>2016-09-17T19:52:01+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2016-09-17T19:52:01+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=baf009f92731c0fc1f036d8b7dba3bf5bb2c2a5e'/>
<id>baf009f92731c0fc1f036d8b7dba3bf5bb2c2a5e</id>
<content type='text'>
Pull powerpc fixes from Michael Ellerman:
 "Fixes for code merged this cycle:

   - Fix restore of SPRs upon wake up from hypervisor state loss from
     Gautham R  Shenoy
   - Fix the state of root PE from Gavin Shan
   - Detach from PE on releasing PCI device from Gavin Shan
   - Fix size of NUM_CPU_FTR_KEYS on 32-bit
   - Fix missed TCE invalidations that should fallback to OPAL"

* tag 'powerpc-4.8-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/powernv/pci: Fix missed TCE invalidations that should fallback to OPAL
  powerpc/powernv: Detach from PE on releasing PCI device
  powerpc/powernv: Fix the state of root PE
  powerpc/kernel: Fix size of NUM_CPU_FTR_KEYS on 32-bit
  powerpc/powernv: Fix restore of SPRs upon wake up from hypervisor state loss
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull powerpc fixes from Michael Ellerman:
 "Fixes for code merged this cycle:

   - Fix restore of SPRs upon wake up from hypervisor state loss from
     Gautham R  Shenoy
   - Fix the state of root PE from Gavin Shan
   - Detach from PE on releasing PCI device from Gavin Shan
   - Fix size of NUM_CPU_FTR_KEYS on 32-bit
   - Fix missed TCE invalidations that should fallback to OPAL"

* tag 'powerpc-4.8-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/powernv/pci: Fix missed TCE invalidations that should fallback to OPAL
  powerpc/powernv: Detach from PE on releasing PCI device
  powerpc/powernv: Fix the state of root PE
  powerpc/kernel: Fix size of NUM_CPU_FTR_KEYS on 32-bit
  powerpc/powernv: Fix restore of SPRs upon wake up from hypervisor state loss
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'uaccess-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs</title>
<updated>2016-09-14T16:35:05+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2016-09-14T16:35:05+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=77e5bdf9f7b2d20939c8d807f3e68778d6e1557a'/>
<id>77e5bdf9f7b2d20939c8d807f3e68778d6e1557a</id>
<content type='text'>
Pull uaccess fixes from Al Viro:
 "Fixes for broken uaccess primitives - mostly lack of proper zeroing
  in copy_from_user()/get_user()/__get_user(), but for several
  architectures there's more (broken clear_user() on frv and
  strncpy_from_user() on hexagon)"

* 'uaccess-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits)
  avr32: fix copy_from_user()
  microblaze: fix __get_user()
  microblaze: fix copy_from_user()
  m32r: fix __get_user()
  blackfin: fix copy_from_user()
  sparc32: fix copy_from_user()
  sh: fix copy_from_user()
  sh64: failing __get_user() should zero
  score: fix copy_from_user() and friends
  score: fix __get_user/get_user
  s390: get_user() should zero on failure
  ppc32: fix copy_from_user()
  parisc: fix copy_from_user()
  openrisc: fix copy_from_user()
  nios2: fix __get_user()
  nios2: copy_from_user() should zero the tail of destination
  mn10300: copy_from_user() should zero on access_ok() failure...
  mn10300: failing __get_user() and get_user() should zero
  mips: copy_from_user() must zero the destination on access_ok() failure
  ARC: uaccess: get_user to zero out dest in cause of fault
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull uaccess fixes from Al Viro:
 "Fixes for broken uaccess primitives - mostly lack of proper zeroing
  in copy_from_user()/get_user()/__get_user(), but for several
  architectures there's more (broken clear_user() on frv and
  strncpy_from_user() on hexagon)"

* 'uaccess-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits)
  avr32: fix copy_from_user()
  microblaze: fix __get_user()
  microblaze: fix copy_from_user()
  m32r: fix __get_user()
  blackfin: fix copy_from_user()
  sparc32: fix copy_from_user()
  sh: fix copy_from_user()
  sh64: failing __get_user() should zero
  score: fix copy_from_user() and friends
  score: fix __get_user/get_user
  s390: get_user() should zero on failure
  ppc32: fix copy_from_user()
  parisc: fix copy_from_user()
  openrisc: fix copy_from_user()
  nios2: fix __get_user()
  nios2: copy_from_user() should zero the tail of destination
  mn10300: copy_from_user() should zero on access_ok() failure...
  mn10300: failing __get_user() and get_user() should zero
  mips: copy_from_user() must zero the destination on access_ok() failure
  ARC: uaccess: get_user to zero out dest in cause of fault
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>ppc32: fix copy_from_user()</title>
<updated>2016-09-13T21:50:02+00:00</updated>
<author>
<name>Al Viro</name>
<email>viro@zeniv.linux.org.uk</email>
</author>
<published>2016-08-21T23:16:26+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=224264657b8b228f949b42346e09ed8c90136a8e'/>
<id>224264657b8b228f949b42346e09ed8c90136a8e</id>
<content type='text'>
should clear on access_ok() failures.  Also remove the useless
range truncation logics.

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
should clear on access_ok() failures.  Also remove the useless
range truncation logics.

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>powerpc/kernel: Fix size of NUM_CPU_FTR_KEYS on 32-bit</title>
<updated>2016-09-12T02:48:28+00:00</updated>
<author>
<name>Michael Ellerman</name>
<email>mpe@ellerman.id.au</email>
</author>
<published>2016-09-12T02:48:28+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=ffed15d3ce3f710b94e6f402e1ca2318f7d7c0e2'/>
<id>ffed15d3ce3f710b94e6f402e1ca2318f7d7c0e2</id>
<content type='text'>
The number of CPU feature keys is meant to map 1:1 to the number of CPU
feature flags defined in cputable.h, and the latter must fit in an
unsigned long.

In commit 4db7327194db ("powerpc: Add option to use jump label for
cpu_has_feature()"), I incorrectly defined NUM_CPU_FTR_KEYS to 64.

There should be no real adverse consequences of this bug, other than us
allocating too many keys.

Fix it by using BITS_PER_LONG.

Fixes: 4db7327194db ("powerpc: Add option to use jump label for cpu_has_feature()")
Tested-by: Meelis Roos &lt;mroos@linux.ee&gt;
Signed-off-by: Michael Ellerman &lt;mpe@ellerman.id.au&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The number of CPU feature keys is meant to map 1:1 to the number of CPU
feature flags defined in cputable.h, and the latter must fit in an
unsigned long.

In commit 4db7327194db ("powerpc: Add option to use jump label for
cpu_has_feature()"), I incorrectly defined NUM_CPU_FTR_KEYS to 64.

There should be no real adverse consequences of this bug, other than us
allocating too many keys.

Fix it by using BITS_PER_LONG.

Fixes: 4db7327194db ("powerpc: Add option to use jump label for cpu_has_feature()")
Tested-by: Meelis Roos &lt;mroos@linux.ee&gt;
Signed-off-by: Michael Ellerman &lt;mpe@ellerman.id.au&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>usercopy: fold builtin_const check into inline function</title>
<updated>2016-09-06T19:17:29+00:00</updated>
<author>
<name>Kees Cook</name>
<email>keescook@chromium.org</email>
</author>
<published>2016-08-31T23:04:21+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=81409e9e28058811c9ea865345e1753f8f677e44'/>
<id>81409e9e28058811c9ea865345e1753f8f677e44</id>
<content type='text'>
Instead of having each caller of check_object_size() need to remember to
check for a const size parameter, move the check into check_object_size()
itself. This actually matches the original implementation in PaX, though
this commit cleans up the now-redundant builtin_const() calls in the
various architectures.

Signed-off-by: Kees Cook &lt;keescook@chromium.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Instead of having each caller of check_object_size() need to remember to
check for a const size parameter, move the check into check_object_size()
itself. This actually matches the original implementation in PaX, though
this commit cleans up the now-redundant builtin_const() calls in the
various architectures.

Signed-off-by: Kees Cook &lt;keescook@chromium.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>powerpc: move hmi.c to arch/powerpc/kvm/</title>
<updated>2016-08-22T01:09:33+00:00</updated>
<author>
<name>Paolo Bonzini</name>
<email>pbonzini@redhat.com</email>
</author>
<published>2016-08-11T13:07:43+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=7c379526d7e71d2041c8ca0bd9af4888916a14b9'/>
<id>7c379526d7e71d2041c8ca0bd9af4888916a14b9</id>
<content type='text'>
hmi.c functions are unused unless sibling_subcore_state is nonzero, and
that in turn happens only if KVM is in use.  So move the code to
arch/powerpc/kvm/, putting it under CONFIG_KVM_BOOK3S_HV_POSSIBLE
rather than CONFIG_PPC_BOOK3S_64.  The sibling_subcore_state is also
included in struct paca_struct only if KVM is supported by the kernel.

Cc: Daniel Axtens &lt;dja@axtens.net&gt;
Cc: Michael Ellerman &lt;mpe@ellerman.id.au&gt;
Cc: Mahesh Salgaonkar &lt;mahesh@linux.vnet.ibm.com&gt;
Cc: Paul Mackerras &lt;paulus@samba.org&gt;
Cc: linuxppc-dev@lists.ozlabs.org
Cc: kvm-ppc@vger.kernel.org
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini &lt;pbonzini@redhat.com&gt;
Signed-off-by: Benjamin Herrenschmidt &lt;benh@kernel.crashing.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
hmi.c functions are unused unless sibling_subcore_state is nonzero, and
that in turn happens only if KVM is in use.  So move the code to
arch/powerpc/kvm/, putting it under CONFIG_KVM_BOOK3S_HV_POSSIBLE
rather than CONFIG_PPC_BOOK3S_64.  The sibling_subcore_state is also
included in struct paca_struct only if KVM is supported by the kernel.

Cc: Daniel Axtens &lt;dja@axtens.net&gt;
Cc: Michael Ellerman &lt;mpe@ellerman.id.au&gt;
Cc: Mahesh Salgaonkar &lt;mahesh@linux.vnet.ibm.com&gt;
Cc: Paul Mackerras &lt;paulus@samba.org&gt;
Cc: linuxppc-dev@lists.ozlabs.org
Cc: kvm-ppc@vger.kernel.org
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini &lt;pbonzini@redhat.com&gt;
Signed-off-by: Benjamin Herrenschmidt &lt;benh@kernel.crashing.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>powerpc/pseries: use pci_host_bridge.release_fn() to kfree(phb)</title>
<updated>2016-08-22T01:09:33+00:00</updated>
<author>
<name>Mauricio Faria de Oliveira</name>
<email>mauricfo@linux.vnet.ibm.com</email>
</author>
<published>2016-08-11T20:25:40+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=2dd9c11b9d4dfbd6c070eab7b81197f65e82f1a0'/>
<id>2dd9c11b9d4dfbd6c070eab7b81197f65e82f1a0</id>
<content type='text'>
This patch leverages 'struct pci_host_bridge' from the PCI subsystem
in order to free the pci_controller only after the last reference to
its devices is dropped (avoiding an oops in pcibios_release_device()
if the last reference is dropped after pcibios_free_controller()).

The patch relies on pci_host_bridge.release_fn() (and .release_data),
which is called automatically by the PCI subsystem when the root bus
is released (i.e., the last reference is dropped).  Those fields are
set via pci_set_host_bridge_release() (e.g. in the platform-specific
implementation of pcibios_root_bridge_prepare()).

It introduces the 'pcibios_free_controller_deferred()' .release_fn()
and it expects .release_data to hold a pointer to the pci_controller.

The function implictly calls 'pcibios_free_controller()', so an user
must *NOT* explicitly call it if using the new _deferred() callback.

The functionality is enabled for pseries (although it isn't platform
specific, and may be used by cxl).

Details on not-so-elegant design choices:

 - Use 'pci_host_bridge.release_data' field as pointer to associated
   'struct pci_controller' so *not* to 'pci_bus_to_host(bridge-&gt;bus)'
   in pcibios_free_controller_deferred().

   That's because pci_remove_root_bus() sets 'host_bridge-&gt;bus = NULL'
   (so, if the last reference is released after pci_remove_root_bus()
   runs, which eventually reaches pcibios_free_controller_deferred(),
   that would hit a null pointer dereference).

   The cxl/vphb.c code calls pci_remove_root_bus(), and the cxl folks
   are interested in this fix.

Test-case #1 (hold references)

  # ls -ld /sys/block/sd* | grep -m1 0021:01:00.0
  &lt;...&gt; /sys/block/sdaa -&gt; ../devices/pci0021:01/0021:01:00.0/&lt;...&gt;

  # ls -ld /sys/block/sd* | grep -m1 0021:01:00.1
  &lt;...&gt; /sys/block/sdab -&gt; ../devices/pci0021:01/0021:01:00.1/&lt;...&gt;

  # cat &gt;/dev/sdaa &amp; pid1=$!
  # cat &gt;/dev/sdab &amp; pid2=$!

  # drmgr -w 5 -d 1 -c phb -s 'PHB 33' -r
  Validating PHB DLPAR capability...yes.
  [  594.306719] pci_hp_remove_devices: PCI: Removing devices on bus 0021:01
  [  594.306738] pci_hp_remove_devices:    Removing 0021:01:00.0...
  ...
  [  598.236381] pci_hp_remove_devices:    Removing 0021:01:00.1...
  ...
  [  611.972077] pci_bus 0021:01: busn_res: [bus 01-ff] is released
  [  611.972140] rpadlpar_io: slot PHB 33 removed

  # kill -9 $pid1
  # kill -9 $pid2
  [  632.918088] pcibios_free_controller_deferred: domain 33, dynamic 1

Test-case #2 (don't hold references)

  # drmgr -w 5 -d 1 -c phb -s 'PHB 33' -r
  Validating PHB DLPAR capability...yes.
  [  916.357363] pci_hp_remove_devices: PCI: Removing devices on bus 0021:01
  [  916.357386] pci_hp_remove_devices:    Removing 0021:01:00.0...
  ...
  [  920.566527] pci_hp_remove_devices:    Removing 0021:01:00.1...
  ...
  [  933.955873] pci_bus 0021:01: busn_res: [bus 01-ff] is released
  [  933.955977] pcibios_free_controller_deferred: domain 33, dynamic 1
  [  933.955999] rpadlpar_io: slot PHB 33 removed

Suggested-By: Gavin Shan &lt;gwshan@linux.vnet.ibm.com&gt;
Signed-off-by: Mauricio Faria de Oliveira &lt;mauricfo@linux.vnet.ibm.com&gt;
Reviewed-by: Gavin Shan &lt;gwshan@linux.vnet.ibm.com&gt;
Reviewed-by: Andrew Donnellan &lt;andrew.donnellan@au1.ibm.com&gt;
Tested-by: Andrew Donnellan &lt;andrew.donnellan@au1.ibm.com&gt; # cxl
Signed-off-by: Benjamin Herrenschmidt &lt;benh@kernel.crashing.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This patch leverages 'struct pci_host_bridge' from the PCI subsystem
in order to free the pci_controller only after the last reference to
its devices is dropped (avoiding an oops in pcibios_release_device()
if the last reference is dropped after pcibios_free_controller()).

The patch relies on pci_host_bridge.release_fn() (and .release_data),
which is called automatically by the PCI subsystem when the root bus
is released (i.e., the last reference is dropped).  Those fields are
set via pci_set_host_bridge_release() (e.g. in the platform-specific
implementation of pcibios_root_bridge_prepare()).

It introduces the 'pcibios_free_controller_deferred()' .release_fn()
and it expects .release_data to hold a pointer to the pci_controller.

The function implictly calls 'pcibios_free_controller()', so an user
must *NOT* explicitly call it if using the new _deferred() callback.

The functionality is enabled for pseries (although it isn't platform
specific, and may be used by cxl).

Details on not-so-elegant design choices:

 - Use 'pci_host_bridge.release_data' field as pointer to associated
   'struct pci_controller' so *not* to 'pci_bus_to_host(bridge-&gt;bus)'
   in pcibios_free_controller_deferred().

   That's because pci_remove_root_bus() sets 'host_bridge-&gt;bus = NULL'
   (so, if the last reference is released after pci_remove_root_bus()
   runs, which eventually reaches pcibios_free_controller_deferred(),
   that would hit a null pointer dereference).

   The cxl/vphb.c code calls pci_remove_root_bus(), and the cxl folks
   are interested in this fix.

Test-case #1 (hold references)

  # ls -ld /sys/block/sd* | grep -m1 0021:01:00.0
  &lt;...&gt; /sys/block/sdaa -&gt; ../devices/pci0021:01/0021:01:00.0/&lt;...&gt;

  # ls -ld /sys/block/sd* | grep -m1 0021:01:00.1
  &lt;...&gt; /sys/block/sdab -&gt; ../devices/pci0021:01/0021:01:00.1/&lt;...&gt;

  # cat &gt;/dev/sdaa &amp; pid1=$!
  # cat &gt;/dev/sdab &amp; pid2=$!

  # drmgr -w 5 -d 1 -c phb -s 'PHB 33' -r
  Validating PHB DLPAR capability...yes.
  [  594.306719] pci_hp_remove_devices: PCI: Removing devices on bus 0021:01
  [  594.306738] pci_hp_remove_devices:    Removing 0021:01:00.0...
  ...
  [  598.236381] pci_hp_remove_devices:    Removing 0021:01:00.1...
  ...
  [  611.972077] pci_bus 0021:01: busn_res: [bus 01-ff] is released
  [  611.972140] rpadlpar_io: slot PHB 33 removed

  # kill -9 $pid1
  # kill -9 $pid2
  [  632.918088] pcibios_free_controller_deferred: domain 33, dynamic 1

Test-case #2 (don't hold references)

  # drmgr -w 5 -d 1 -c phb -s 'PHB 33' -r
  Validating PHB DLPAR capability...yes.
  [  916.357363] pci_hp_remove_devices: PCI: Removing devices on bus 0021:01
  [  916.357386] pci_hp_remove_devices:    Removing 0021:01:00.0...
  ...
  [  920.566527] pci_hp_remove_devices:    Removing 0021:01:00.1...
  ...
  [  933.955873] pci_bus 0021:01: busn_res: [bus 01-ff] is released
  [  933.955977] pcibios_free_controller_deferred: domain 33, dynamic 1
  [  933.955999] rpadlpar_io: slot PHB 33 removed

Suggested-By: Gavin Shan &lt;gwshan@linux.vnet.ibm.com&gt;
Signed-off-by: Mauricio Faria de Oliveira &lt;mauricfo@linux.vnet.ibm.com&gt;
Reviewed-by: Gavin Shan &lt;gwshan@linux.vnet.ibm.com&gt;
Reviewed-by: Andrew Donnellan &lt;andrew.donnellan@au1.ibm.com&gt;
Tested-by: Andrew Donnellan &lt;andrew.donnellan@au1.ibm.com&gt; # cxl
Signed-off-by: Benjamin Herrenschmidt &lt;benh@kernel.crashing.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>powerpc: cputhreads: Add missing include file</title>
<updated>2016-08-22T01:09:33+00:00</updated>
<author>
<name>Guenter Roeck</name>
<email>linux@roeck-us.net</email>
</author>
<published>2016-08-14T20:53:17+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=e340eca90ee18547027a6d5745ffabf7d173dfcc'/>
<id>e340eca90ee18547027a6d5745ffabf7d173dfcc</id>
<content type='text'>
Powerpc builds may fail with the following build error.

Error log:
In file included from ./arch/powerpc/include/asm/mmu_context.h:11:0,
                 from ./include/linux/mmu_context.h:4,
		 from mm/mmu_context.c:8:
./arch/powerpc/include/asm/cputhreads.h: In function 'get_tensr':
./arch/powerpc/include/asm/cputhreads.h:101:2: error:
	implicit declaration of function 'cpu_has_feature'

The problem can be triggered by configuring ppc64e_defconfig and selecting
CONFIG_TICK_CPU_ACCOUNTING instead of CONFIG_VIRT_CPU_ACCOUNTING_NATIVE.

Fixes: b92a226e5284 ("powerpc: Move cpu_has_feature() to a separate file")
Signed-off-by: Guenter Roeck &lt;linux@roeck-us.net&gt;
Signed-off-by: Benjamin Herrenschmidt &lt;benh@kernel.crashing.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Powerpc builds may fail with the following build error.

Error log:
In file included from ./arch/powerpc/include/asm/mmu_context.h:11:0,
                 from ./include/linux/mmu_context.h:4,
		 from mm/mmu_context.c:8:
./arch/powerpc/include/asm/cputhreads.h: In function 'get_tensr':
./arch/powerpc/include/asm/cputhreads.h:101:2: error:
	implicit declaration of function 'cpu_has_feature'

The problem can be triggered by configuring ppc64e_defconfig and selecting
CONFIG_TICK_CPU_ACCOUNTING instead of CONFIG_VIRT_CPU_ACCOUNTING_NATIVE.

Fixes: b92a226e5284 ("powerpc: Move cpu_has_feature() to a separate file")
Signed-off-by: Guenter Roeck &lt;linux@roeck-us.net&gt;
Signed-off-by: Benjamin Herrenschmidt &lt;benh@kernel.crashing.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'powerpc-4.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux</title>
<updated>2016-08-12T19:09:44+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2016-08-12T19:09:44+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=8766dc68d1cb9f01e813315fbdc466e88be9a459'/>
<id>8766dc68d1cb9f01e813315fbdc466e88be9a459</id>
<content type='text'>
Pull powerpc fixes from Michael Ellerman:
 "Some powerpc fixes for 4.8:

  Misc:
   - powerpc/vdso: Fix build rules to rebuild vdsos correctly from Nicholas Piggin
   - powerpc/ptrace: Fix coredump since ptrace TM changes from Cyril Bur
   - powerpc/32: Fix csum_partial_copy_generic() from Christophe Leroy
   - cxl: Set psl_fir_cntl to production environment value from Frederic Barrat
   - powerpc/eeh: Switch to conventional PCI address output in EEH log from Guilherme G. Piccoli
   - cxl: Use fixed width predefined types in data structure. from Philippe Bergheaud
   - powerpc/vdso: Add missing include file from Guenter Roeck
   - powerpc: Fix unused function warning 'lmb_to_memblock' from Alastair D'Silva
   - powerpc/powernv/ioda: Fix TCE invalidate to work in real mode again from Alexey Kardashevskiy
   - powerpc/cell: Add missing error code in spufs_mkgang() from Dan Carpenter
   - crypto: crc32c-vpmsum - Convert to CPU feature based module autoloading from Anton Blanchard
   - powerpc/pasemi: Fix coherent_dma_mask for dma engine from Darren Stevens

  Benjamin Herrenschmidt:
   - powerpc/32: Fix crash during static key init
   - powerpc: Update obsolete comment in setup_32.c about early_init()
   - powerpc: Print the kernel load address at the end of prom_init()
   - powerpc/pnv/pci: Fix incorrect PE reservation attempt on some 64-bit BARs
   - powerpc/xics: Properly set Edge/Level type and enable resend

  Mahesh Salgaonkar:
   - powerpc/book3s: Fix MCE console messages for unrecoverable MCE.
   - powerpc/powernv: Fix MCE handler to avoid trashing CR0/CR1 registers.
   - powerpc/powernv: Move IDLE_STATE_ENTER_SEQ macro to cpuidle.h
   - powerpc/powernv: Load correct TOC pointer while waking up from winkle.

  Andrew Donnellan:
   - cxl: Fix sparse warnings
   - cxl: Fix NULL dereference in cxl_context_init() on PowerVM guests

  Michael Ellerman:
   - selftests/powerpc: Specify we expect to build with std=gnu99
   - powerpc/Makefile: Use cflags-y/aflags-y for setting endian options
   - powerpc/pci: Fix endian bug in fixed PHB numbering"

* tag 'powerpc-4.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (26 commits)
  selftests/powerpc: Specify we expect to build with std=gnu99
  powerpc/vdso: Fix build rules to rebuild vdsos correctly
  powerpc/Makefile: Use cflags-y/aflags-y for setting endian options
  powerpc/32: Fix crash during static key init
  powerpc: Update obsolete comment in setup_32.c about early_init()
  powerpc: Print the kernel load address at the end of prom_init()
  powerpc/ptrace: Fix coredump since ptrace TM changes
  powerpc/32: Fix csum_partial_copy_generic()
  cxl: Set psl_fir_cntl to production environment value
  powerpc/pnv/pci: Fix incorrect PE reservation attempt on some 64-bit BARs
  powerpc/book3s: Fix MCE console messages for unrecoverable MCE.
  powerpc/pci: Fix endian bug in fixed PHB numbering
  powerpc/eeh: Switch to conventional PCI address output in EEH log
  cxl: Fix sparse warnings
  cxl: Fix NULL dereference in cxl_context_init() on PowerVM guests
  cxl: Use fixed width predefined types in data structure.
  powerpc/vdso: Add missing include file
  powerpc: Fix unused function warning 'lmb_to_memblock'
  powerpc/powernv: Fix MCE handler to avoid trashing CR0/CR1 registers.
  powerpc/powernv: Move IDLE_STATE_ENTER_SEQ macro to cpuidle.h
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull powerpc fixes from Michael Ellerman:
 "Some powerpc fixes for 4.8:

  Misc:
   - powerpc/vdso: Fix build rules to rebuild vdsos correctly from Nicholas Piggin
   - powerpc/ptrace: Fix coredump since ptrace TM changes from Cyril Bur
   - powerpc/32: Fix csum_partial_copy_generic() from Christophe Leroy
   - cxl: Set psl_fir_cntl to production environment value from Frederic Barrat
   - powerpc/eeh: Switch to conventional PCI address output in EEH log from Guilherme G. Piccoli
   - cxl: Use fixed width predefined types in data structure. from Philippe Bergheaud
   - powerpc/vdso: Add missing include file from Guenter Roeck
   - powerpc: Fix unused function warning 'lmb_to_memblock' from Alastair D'Silva
   - powerpc/powernv/ioda: Fix TCE invalidate to work in real mode again from Alexey Kardashevskiy
   - powerpc/cell: Add missing error code in spufs_mkgang() from Dan Carpenter
   - crypto: crc32c-vpmsum - Convert to CPU feature based module autoloading from Anton Blanchard
   - powerpc/pasemi: Fix coherent_dma_mask for dma engine from Darren Stevens

  Benjamin Herrenschmidt:
   - powerpc/32: Fix crash during static key init
   - powerpc: Update obsolete comment in setup_32.c about early_init()
   - powerpc: Print the kernel load address at the end of prom_init()
   - powerpc/pnv/pci: Fix incorrect PE reservation attempt on some 64-bit BARs
   - powerpc/xics: Properly set Edge/Level type and enable resend

  Mahesh Salgaonkar:
   - powerpc/book3s: Fix MCE console messages for unrecoverable MCE.
   - powerpc/powernv: Fix MCE handler to avoid trashing CR0/CR1 registers.
   - powerpc/powernv: Move IDLE_STATE_ENTER_SEQ macro to cpuidle.h
   - powerpc/powernv: Load correct TOC pointer while waking up from winkle.

  Andrew Donnellan:
   - cxl: Fix sparse warnings
   - cxl: Fix NULL dereference in cxl_context_init() on PowerVM guests

  Michael Ellerman:
   - selftests/powerpc: Specify we expect to build with std=gnu99
   - powerpc/Makefile: Use cflags-y/aflags-y for setting endian options
   - powerpc/pci: Fix endian bug in fixed PHB numbering"

* tag 'powerpc-4.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (26 commits)
  selftests/powerpc: Specify we expect to build with std=gnu99
  powerpc/vdso: Fix build rules to rebuild vdsos correctly
  powerpc/Makefile: Use cflags-y/aflags-y for setting endian options
  powerpc/32: Fix crash during static key init
  powerpc: Update obsolete comment in setup_32.c about early_init()
  powerpc: Print the kernel load address at the end of prom_init()
  powerpc/ptrace: Fix coredump since ptrace TM changes
  powerpc/32: Fix csum_partial_copy_generic()
  cxl: Set psl_fir_cntl to production environment value
  powerpc/pnv/pci: Fix incorrect PE reservation attempt on some 64-bit BARs
  powerpc/book3s: Fix MCE console messages for unrecoverable MCE.
  powerpc/pci: Fix endian bug in fixed PHB numbering
  powerpc/eeh: Switch to conventional PCI address output in EEH log
  cxl: Fix sparse warnings
  cxl: Fix NULL dereference in cxl_context_init() on PowerVM guests
  cxl: Use fixed width predefined types in data structure.
  powerpc/vdso: Add missing include file
  powerpc: Fix unused function warning 'lmb_to_memblock'
  powerpc/powernv: Fix MCE handler to avoid trashing CR0/CR1 registers.
  powerpc/powernv: Move IDLE_STATE_ENTER_SEQ macro to cpuidle.h
  ...
</pre>
</div>
</content>
</entry>
</feed>
