linux-stable.git/arch/powerpc/include, branch linux-6.17.y Linux kernel stable tree powerpc/32: Remove PAGE_KERNEL_TEXT to fix startup failure 2025-10-29T13:10:17+00:00 Christophe Leroy christophe.leroy@csgroup.eu 2025-09-09T10:03:49+00:00 3739560a7d1ba64ae006ba250f7e9e4c49e89210 [ Upstream commit 9316512b717f6f25c4649b3fdb0a905b6a318e9f ] PAGE_KERNEL_TEXT is an old macro that is used to tell kernel whether kernel text has to be mapped read-only or read-write based on build time options. But nowadays, with functionnalities like jump_labels, static links, etc ... more only less all kernels need to be read-write at some point, and some combinations of configs failed to work due to innacurate setting of PAGE_KERNEL_TEXT. On the other hand, today we have CONFIG_STRICT_KERNEL_RWX which implements a more controlled access to kernel modifications. Instead of trying to keep PAGE_KERNEL_TEXT accurate with all possible options that may imply kernel text modification, always set kernel text read-write at startup and rely on CONFIG_STRICT_KERNEL_RWX to provide accurate protection. Do this by passing PAGE_KERNEL_X to map_kernel_page() in __maping_ram_chunk() instead of passing PAGE_KERNEL_TEXT. Once this is done, the only remaining user of PAGE_KERNEL_TEXT is mmu_mark_initmem_nx() which uses it in a call to setibat(). As setibat() ignores the RW/RO, we can seamlessly replace PAGE_KERNEL_TEXT by PAGE_KERNEL_X here as well and get rid of PAGE_KERNEL_TEXT completely. Reported-by: Erhard Furtner <erhard_f@mailbox.org> Closes: https://lore.kernel.org/all/342b4120-911c-4723-82ec-d8c9b03a8aef@mailbox.org/ Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Tested-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/8e2d793abf87ae3efb8f6dce10f974ac0eda61b8.1757412205.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 9316512b717f6f25c4649b3fdb0a905b6a318e9f ]

PAGE_KERNEL_TEXT is an old macro that is used to tell kernel whether
kernel text has to be mapped read-only or read-write based on build
time options.

But nowadays, with functionnalities like jump_labels, static links,
etc ... more only less all kernels need to be read-write at some
point, and some combinations of configs failed to work due to
innacurate setting of PAGE_KERNEL_TEXT. On the other hand, today
we have CONFIG_STRICT_KERNEL_RWX which implements a more controlled
access to kernel modifications.

Instead of trying to keep PAGE_KERNEL_TEXT accurate with all
possible options that may imply kernel text modification, always
set kernel text read-write at startup and rely on
CONFIG_STRICT_KERNEL_RWX to provide accurate protection.

Do this by passing PAGE_KERNEL_X to map_kernel_page() in
__maping_ram_chunk() instead of passing PAGE_KERNEL_TEXT. Once
this is done, the only remaining user of PAGE_KERNEL_TEXT is
mmu_mark_initmem_nx() which uses it in a call to setibat().
As setibat() ignores the RW/RO, we can seamlessly replace
PAGE_KERNEL_TEXT by PAGE_KERNEL_X here as well and get rid of
PAGE_KERNEL_TEXT completely.

Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Closes: https://lore.kernel.org/all/342b4120-911c-4723-82ec-d8c9b03a8aef@mailbox.org/
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/8e2d793abf87ae3efb8f6dce10f974ac0eda61b8.1757412205.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
sched/fair: Get rid of sched_domains_curr_level hack for tl->cpumask() 2025-10-15T10:03:17+00:00 Peter Zijlstra peterz@infradead.org 2025-08-25T12:02:44+00:00 788bfdb55866beb0ddf0610f92ed1ed4928b8f05 [ Upstream commit 661f951e371cc134ea31c84238dbdc9a898b8403 ] Leon [1] and Vinicius [2] noted a topology_span_sane() warning during their testing starting from v6.16-rc1. Debug that followed pointed to the tl->mask() for the NODE domain being incorrectly resolved to that of the highest NUMA domain. tl->mask() for NODE is set to the sd_numa_mask() which depends on the global "sched_domains_curr_level" hack. "sched_domains_curr_level" is set to the "tl->numa_level" during tl traversal in build_sched_domains() calling sd_init() but was not reset before topology_span_sane(). Since "tl->numa_level" still reflected the old value from build_sched_domains(), topology_span_sane() for the NODE domain trips when the span of the last NUMA domain overlaps. Instead of replicating the "sched_domains_curr_level" hack, get rid of it entirely and instead, pass the entire "sched_domain_topology_level" object to tl->cpumask() function to prevent such mishap in the future. sd_numa_mask() now directly references "tl->numa_level" instead of relying on the global "sched_domains_curr_level" hack to index into sched_domains_numa_masks[]. The original warning was reproducible on the following NUMA topology reported by Leon: $ sudo numactl -H available: 5 nodes (0-4) node 0 cpus: 0 1 node 0 size: 2927 MB node 0 free: 1603 MB node 1 cpus: 2 3 node 1 size: 3023 MB node 1 free: 3008 MB node 2 cpus: 4 5 node 2 size: 3023 MB node 2 free: 3007 MB node 3 cpus: 6 7 node 3 size: 3023 MB node 3 free: 3002 MB node 4 cpus: 8 9 node 4 size: 3022 MB node 4 free: 2718 MB node distances: node 0 1 2 3 4 0: 10 39 38 37 36 1: 39 10 38 37 36 2: 38 38 10 37 36 3: 37 37 37 10 36 4: 36 36 36 36 10 The above topology can be mimicked using the following QEMU cmd that was used to reproduce the warning and test the fix: sudo qemu-system-x86_64 -enable-kvm -cpu host \ -m 20G -smp cpus=10,sockets=10 -machine q35 \ -object memory-backend-ram,size=4G,id=m0 \ -object memory-backend-ram,size=4G,id=m1 \ -object memory-backend-ram,size=4G,id=m2 \ -object memory-backend-ram,size=4G,id=m3 \ -object memory-backend-ram,size=4G,id=m4 \ -numa node,cpus=0-1,memdev=m0,nodeid=0 \ -numa node,cpus=2-3,memdev=m1,nodeid=1 \ -numa node,cpus=4-5,memdev=m2,nodeid=2 \ -numa node,cpus=6-7,memdev=m3,nodeid=3 \ -numa node,cpus=8-9,memdev=m4,nodeid=4 \ -numa dist,src=0,dst=1,val=39 \ -numa dist,src=0,dst=2,val=38 \ -numa dist,src=0,dst=3,val=37 \ -numa dist,src=0,dst=4,val=36 \ -numa dist,src=1,dst=0,val=39 \ -numa dist,src=1,dst=2,val=38 \ -numa dist,src=1,dst=3,val=37 \ -numa dist,src=1,dst=4,val=36 \ -numa dist,src=2,dst=0,val=38 \ -numa dist,src=2,dst=1,val=38 \ -numa dist,src=2,dst=3,val=37 \ -numa dist,src=2,dst=4,val=36 \ -numa dist,src=3,dst=0,val=37 \ -numa dist,src=3,dst=1,val=37 \ -numa dist,src=3,dst=2,val=37 \ -numa dist,src=3,dst=4,val=36 \ -numa dist,src=4,dst=0,val=36 \ -numa dist,src=4,dst=1,val=36 \ -numa dist,src=4,dst=2,val=36 \ -numa dist,src=4,dst=3,val=36 \ ... [ prateek: Moved common functions to include/linux/sched/topology.h, reuse the common bits for s390 and ppc, commit message ] Closes: https://lore.kernel.org/lkml/20250610110701.GA256154@unreal/ [1] Fixes: ccf74128d66c ("sched/topology: Assert non-NUMA topology masks don't (partially) overlap") # ce29a7da84cd, f55dac1dafb3 Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reported-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Valentin Schneider <vschneid@redhat.com> Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com> Tested-by: Valentin Schneider <vschneid@redhat.com> # x86 Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com> # powerpc Link: https://lore.kernel.org/lkml/a3de98387abad28592e6ab591f3ff6107fe01dc1.1755893468.git.tim.c.chen@linux.intel.com/ [2] Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 661f951e371cc134ea31c84238dbdc9a898b8403 ]

Leon [1] and Vinicius [2] noted a topology_span_sane() warning during
their testing starting from v6.16-rc1. Debug that followed pointed to
the tl->mask() for the NODE domain being incorrectly resolved to that of
the highest NUMA domain.

tl->mask() for NODE is set to the sd_numa_mask() which depends on the
global "sched_domains_curr_level" hack. "sched_domains_curr_level" is
set to the "tl->numa_level" during tl traversal in build_sched_domains()
calling sd_init() but was not reset before topology_span_sane().

Since "tl->numa_level" still reflected the old value from
build_sched_domains(), topology_span_sane() for the NODE domain trips
when the span of the last NUMA domain overlaps.

Instead of replicating the "sched_domains_curr_level" hack, get rid of
it entirely and instead, pass the entire "sched_domain_topology_level"
object to tl->cpumask() function to prevent such mishap in the future.

sd_numa_mask() now directly references "tl->numa_level" instead of
relying on the global "sched_domains_curr_level" hack to index into
sched_domains_numa_masks[].

The original warning was reproducible on the following NUMA topology
reported by Leon:

    $ sudo numactl -H
    available: 5 nodes (0-4)
    node 0 cpus: 0 1
    node 0 size: 2927 MB
    node 0 free: 1603 MB
    node 1 cpus: 2 3
    node 1 size: 3023 MB
    node 1 free: 3008 MB
    node 2 cpus: 4 5
    node 2 size: 3023 MB
    node 2 free: 3007 MB
    node 3 cpus: 6 7
    node 3 size: 3023 MB
    node 3 free: 3002 MB
    node 4 cpus: 8 9
    node 4 size: 3022 MB
    node 4 free: 2718 MB
    node distances:
    node   0   1   2   3   4
      0:  10  39  38  37  36
      1:  39  10  38  37  36
      2:  38  38  10  37  36
      3:  37  37  37  10  36
      4:  36  36  36  36  10

The above topology can be mimicked using the following QEMU cmd that was
used to reproduce the warning and test the fix:

     sudo qemu-system-x86_64 -enable-kvm -cpu host \
     -m 20G -smp cpus=10,sockets=10 -machine q35 \
     -object memory-backend-ram,size=4G,id=m0 \
     -object memory-backend-ram,size=4G,id=m1 \
     -object memory-backend-ram,size=4G,id=m2 \
     -object memory-backend-ram,size=4G,id=m3 \
     -object memory-backend-ram,size=4G,id=m4 \
     -numa node,cpus=0-1,memdev=m0,nodeid=0 \
     -numa node,cpus=2-3,memdev=m1,nodeid=1 \
     -numa node,cpus=4-5,memdev=m2,nodeid=2 \
     -numa node,cpus=6-7,memdev=m3,nodeid=3 \
     -numa node,cpus=8-9,memdev=m4,nodeid=4 \
     -numa dist,src=0,dst=1,val=39 \
     -numa dist,src=0,dst=2,val=38 \
     -numa dist,src=0,dst=3,val=37 \
     -numa dist,src=0,dst=4,val=36 \
     -numa dist,src=1,dst=0,val=39 \
     -numa dist,src=1,dst=2,val=38 \
     -numa dist,src=1,dst=3,val=37 \
     -numa dist,src=1,dst=4,val=36 \
     -numa dist,src=2,dst=0,val=38 \
     -numa dist,src=2,dst=1,val=38 \
     -numa dist,src=2,dst=3,val=37 \
     -numa dist,src=2,dst=4,val=36 \
     -numa dist,src=3,dst=0,val=37 \
     -numa dist,src=3,dst=1,val=37 \
     -numa dist,src=3,dst=2,val=37 \
     -numa dist,src=3,dst=4,val=36 \
     -numa dist,src=4,dst=0,val=36 \
     -numa dist,src=4,dst=1,val=36 \
     -numa dist,src=4,dst=2,val=36 \
     -numa dist,src=4,dst=3,val=36 \
     ...

  [ prateek: Moved common functions to include/linux/sched/topology.h,
    reuse the common bits for s390 and ppc, commit message ]

Closes: https://lore.kernel.org/lkml/20250610110701.GA256154@unreal/ [1]
Fixes: ccf74128d66c ("sched/topology: Assert non-NUMA topology masks don't (partially) overlap") # ce29a7da84cd, f55dac1dafb3
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Tested-by: Valentin Schneider <vschneid@redhat.com> # x86
Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com> # powerpc
Link: https://lore.kernel.org/lkml/a3de98387abad28592e6ab591f3ff6107fe01dc1.1755893468.git.tim.c.chen@linux.intel.com/ [2]
Signed-off-by: Sasha Levin <sashal@kernel.org>
powerpc/603: Really copy kernel PGD entries into all PGDIRs 2025-10-15T10:03:15+00:00 Christophe Leroy christophe.leroy@csgroup.eu 2025-08-21T06:30:18+00:00 d5cd6ff51ed7b2ba038f2a09cdc781a922289402 [ Upstream commit f2863371f017eb03c230addc253783fa4c7e90f5 ] Commit 82ef440f9a38 ("powerpc/603: Copy kernel PGD entries into all PGDIRs and preallocate execmem page tables") was supposed to extend to powerpc 603 the copy of kernel PGD entries into all PGDIRs implemented in a previous patch on the 8xx. But 603 is book3s/32 and uses a duplicate of pgd_alloc() defined in another header. So really do the copy at the correct place for the 603. Fixes: 82ef440f9a38 ("powerpc/603: Copy kernel PGD entries into all PGDIRs and preallocate execmem page tables") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/752ab7514cae089a2dd7cc0f3d5e35849f76adb9.1755757797.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f2863371f017eb03c230addc253783fa4c7e90f5 ]

Commit 82ef440f9a38 ("powerpc/603: Copy kernel PGD entries into all
PGDIRs and preallocate execmem page tables") was supposed to extend
to powerpc 603 the copy of kernel PGD entries into all PGDIRs
implemented in a previous patch on the 8xx. But 603 is book3s/32 and
uses a duplicate of pgd_alloc() defined in another header.

So really do the copy at the correct place for the 603.

Fixes: 82ef440f9a38 ("powerpc/603: Copy kernel PGD entries into all PGDIRs and preallocate execmem page tables")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/752ab7514cae089a2dd7cc0f3d5e35849f76adb9.1755757797.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
Merge tag 'powerpc-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux 2025-08-04T02:15:04+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-08-04T02:15:04+00:00 806381e1a24c6eec2b431cbba2ba1b81e518fea8 Pull powerpc fixes from Madhavan Srinivasan: - Fixes for several issues in the powernv PCI hotplug path - Fix htmldoc generation for htm.rst in toctree - Add jit support for load_acquire and store_release in ppc64 bpf jit Thanks to Bjorn Helgaas, Hari Bathini, Puranjay Mohan, Saket Kumar Bhaskar, Shawn Anastasio, Timothy Pearson, and Vishal Parmar * tag 'powerpc-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc64/bpf: Add jit support for load_acquire and store_release docs: powerpc: add htm.rst to toctree PCI: pnv_php: Enable third attention indicator state PCI: pnv_php: Fix surprise plug detection and recovery powerpc/eeh: Make EEH driver device hotplug safe powerpc/eeh: Export eeh_unfreeze_pe() PCI: pnv_php: Work around switches with broken presence detection PCI: pnv_php: Clean up allocated IRQs on unplug 
Pull powerpc fixes from Madhavan Srinivasan:

 - Fixes for several issues in the powernv PCI hotplug path

 - Fix htmldoc generation for htm.rst in toctree

 - Add jit support for load_acquire and store_release in ppc64 bpf jit

Thanks to Bjorn Helgaas, Hari Bathini, Puranjay Mohan, Saket Kumar
Bhaskar, Shawn Anastasio, Timothy Pearson, and Vishal Parmar

* tag 'powerpc-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc64/bpf: Add jit support for load_acquire and store_release
  docs: powerpc: add htm.rst to toctree
  PCI: pnv_php: Enable third attention indicator state
  PCI: pnv_php: Fix surprise plug detection and recovery
  powerpc/eeh: Make EEH driver device hotplug safe
  powerpc/eeh: Export eeh_unfreeze_pe()
  PCI: pnv_php: Work around switches with broken presence detection
  PCI: pnv_php: Clean up allocated IRQs on unplug
Merge tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm 2025-07-31T21:57:54+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-07-31T21:57:54+00:00 beace86e61e465dba204a268ab3f3377153a4973 Pull MM updates from Andrew Morton: "As usual, many cleanups. The below blurbiage describes 42 patchsets. 21 of those are partially or fully cleanup work. "cleans up", "cleanup", "maintainability", "rationalizes", etc. I never knew the MM code was so dirty. "mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes) addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly mapped VMAs were not eligible for merging with existing adjacent VMAs. "mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park) adds a new kernel module which simplifies the setup and usage of DAMON in production environments. "stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig) is a cleanup to the writeback code which removes a couple of pointers from struct writeback_control. "drivers/base/node.c: optimization and cleanups" (Donet Tom) contains largely uncorrelated cleanups to the NUMA node setup and management code. "mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman) does some maintenance work on the userfaultfd code. "Readahead tweaks for larger folios" (Ryan Roberts) implements some tuneups for pagecache readahead when it is reading into order>0 folios. "selftests/mm: Tweaks to the cow test" (Mark Brown) provides some cleanups and consistency improvements to the selftests code. "Optimize mremap() for large folios" (Dev Jain) does that. A 37% reduction in execution time was measured in a memset+mremap+munmap microbenchmark. "Remove zero_user()" (Matthew Wilcox) expunges zero_user() in favor of the more modern memzero_page(). "mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand) addresses some warts which David noticed in the huge page code. These were not known to be causing any issues at this time. "mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park) provides some cleanup and consolidation work in DAMON. "use vm_flags_t consistently" (Lorenzo Stoakes) uses vm_flags_t in places where we were inappropriately using other types. "mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy) increases the reliability of large page allocation in the memfd code. "mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple) removes several now-unneeded PFN_* flags. "mm/damon: decouple sysfs from core" (SeongJae Park) implememnts some cleanup and maintainability work in the DAMON sysfs layer. "madvise cleanup" (Lorenzo Stoakes) does quite a lot of cleanup/maintenance work in the madvise() code. "madvise anon_name cleanups" (Vlastimil Babka) provides additional cleanups on top or Lorenzo's effort. "Implement numa node notifier" (Oscar Salvador) creates a standalone notifier for NUMA node memory state changes. Previously these were lumped under the more general memory on/offline notifier. "Make MIGRATE_ISOLATE a standalone bit" (Zi Yan) cleans up the pageblock isolation code and fixes a potential issue which doesn't seem to cause any problems in practice. "selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park) adds additional drgn- and python-based DAMON selftests which are more comprehensive than the existing selftest suite. "Misc rework on hugetlb faulting path" (Oscar Salvador) fixes a rather obscure deadlock in the hugetlb fault code and follows that fix with a series of cleanups. "cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport) rationalizes and cleans up the highmem-specific code in the CMA allocator. "mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand) provides cleanups and future-preparedness to the migration code. "mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park) adds some tracepoints to some DAMON auto-tuning code. "mm/damon: fix misc bugs in DAMON modules" (SeongJae Park) does that. "mm/damon: misc cleanups" (SeongJae Park) also does what it claims. "mm: folio_pte_batch() improvements" (David Hildenbrand) cleans up the large folio PTE batching code. "mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park) facilitates dynamic alteration of DAMON's inter-node allocation policy. "Remove unmap_and_put_page()" (Vishal Moola) provides a couple of page->folio conversions. "mm: per-node proactive reclaim" (Davidlohr Bueso) implements a per-node control of proactive reclaim - beyond the current memcg-based implementation. "mm/damon: remove damon_callback" (SeongJae Park) replaces the damon_callback interface with a more general and powerful damon_call()+damos_walk() interface. "mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes) implements a number of mremap cleanups (of course) in preparation for adding new mremap() functionality: newly permit the remapping of multiple VMAs when the user is specifying MREMAP_FIXED. It still excludes some specialized situations where this cannot be performed reliably. "drop hugetlb_free_pgd_range()" (Anthony Yznaga) switches some sparc hugetlb code over to the generic version and removes the thus-unneeded hugetlb_free_pgd_range(). "mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park) augments the present userspace-requested update of DAMON sysfs monitoring files. Automatic update is now provided, along with a tunable to control the update interval. "Some randome fixes and cleanups to swapfile" (Kemeng Shi) does what is claims. "mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand) provides (and uses) a means by which debug-style functions can grab a copy of a pageframe and inspect it locklessly without tripping over the races inherent in operating on the live pageframe directly. "use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan) addresses the large contention issues which can be triggered by reads from that procfs file. Latencies are reduced by more than half in some situations. The series also introduces several new selftests for the /proc/pid/maps interface. "__folio_split() clean up" (Zi Yan) cleans up __folio_split()! "Optimize mprotect() for large folios" (Dev Jain) provides some quite large (>3x) speedups to mprotect() when dealing with large folios. "selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian) does some cleanup work in the selftests code. "tools/testing: expand mremap testing" (Lorenzo Stoakes) extends the mremap() selftest in several ways, including adding more checking of Lorenzo's recently added "permit mremap() move of multiple VMAs" feature. "selftests/damon/sysfs.py: test all parameters" (SeongJae Park) extends the DAMON sysfs interface selftest so that it tests all possible user-requested parameters. Rather than the present minimal subset" * tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits) MAINTAINERS: add missing headers to mempory policy & migration section MAINTAINERS: add missing file to cgroup section MAINTAINERS: add MM MISC section, add missing files to MISC and CORE MAINTAINERS: add missing zsmalloc file MAINTAINERS: add missing files to page alloc section MAINTAINERS: add missing shrinker files MAINTAINERS: move memremap.[ch] to hotplug section MAINTAINERS: add missing mm_slot.h file THP section MAINTAINERS: add missing interval_tree.c to memory mapping section MAINTAINERS: add missing percpu-internal.h file to per-cpu section mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info() selftests/damon: introduce _common.sh to host shared function selftests/damon/sysfs.py: test runtime reduction of DAMON parameters selftests/damon/sysfs.py: test non-default parameters runtime commit selftests/damon/sysfs.py: generalize DAMON context commit assertion selftests/damon/sysfs.py: generalize monitoring attributes commit assertion selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion selftests/damon/sysfs.py: test DAMOS filters commitment selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion selftests/damon/sysfs.py: test DAMOS destinations commitment ... 
Pull MM updates from Andrew Morton:
 "As usual, many cleanups. The below blurbiage describes 42 patchsets.
  21 of those are partially or fully cleanup work. "cleans up",
  "cleanup", "maintainability", "rationalizes", etc.

  I never knew the MM code was so dirty.

  "mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes)
     addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly
     mapped VMAs were not eligible for merging with existing adjacent
     VMAs.

  "mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park)
     adds a new kernel module which simplifies the setup and usage of
     DAMON in production environments.

  "stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig)
     is a cleanup to the writeback code which removes a couple of
     pointers from struct writeback_control.

  "drivers/base/node.c: optimization and cleanups" (Donet Tom)
     contains largely uncorrelated cleanups to the NUMA node setup and
     management code.

  "mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman)
     does some maintenance work on the userfaultfd code.

  "Readahead tweaks for larger folios" (Ryan Roberts)
     implements some tuneups for pagecache readahead when it is reading
     into order>0 folios.

  "selftests/mm: Tweaks to the cow test" (Mark Brown)
     provides some cleanups and consistency improvements to the
     selftests code.

  "Optimize mremap() for large folios" (Dev Jain)
     does that. A 37% reduction in execution time was measured in a
     memset+mremap+munmap microbenchmark.

  "Remove zero_user()" (Matthew Wilcox)
     expunges zero_user() in favor of the more modern memzero_page().

  "mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand)
     addresses some warts which David noticed in the huge page code.
     These were not known to be causing any issues at this time.

  "mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park)
     provides some cleanup and consolidation work in DAMON.

  "use vm_flags_t consistently" (Lorenzo Stoakes)
     uses vm_flags_t in places where we were inappropriately using other
     types.

  "mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy)
     increases the reliability of large page allocation in the memfd
     code.

  "mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple)
     removes several now-unneeded PFN_* flags.

  "mm/damon: decouple sysfs from core" (SeongJae Park)
     implememnts some cleanup and maintainability work in the DAMON
     sysfs layer.

  "madvise cleanup" (Lorenzo Stoakes)
     does quite a lot of cleanup/maintenance work in the madvise() code.

  "madvise anon_name cleanups" (Vlastimil Babka)
     provides additional cleanups on top or Lorenzo's effort.

  "Implement numa node notifier" (Oscar Salvador)
     creates a standalone notifier for NUMA node memory state changes.
     Previously these were lumped under the more general memory
     on/offline notifier.

  "Make MIGRATE_ISOLATE a standalone bit" (Zi Yan)
     cleans up the pageblock isolation code and fixes a potential issue
     which doesn't seem to cause any problems in practice.

  "selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park)
     adds additional drgn- and python-based DAMON selftests which are
     more comprehensive than the existing selftest suite.

  "Misc rework on hugetlb faulting path" (Oscar Salvador)
     fixes a rather obscure deadlock in the hugetlb fault code and
     follows that fix with a series of cleanups.

  "cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport)
     rationalizes and cleans up the highmem-specific code in the CMA
     allocator.

  "mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand)
     provides cleanups and future-preparedness to the migration code.

  "mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park)
     adds some tracepoints to some DAMON auto-tuning code.

  "mm/damon: fix misc bugs in DAMON modules" (SeongJae Park)
     does that.

  "mm/damon: misc cleanups" (SeongJae Park)
     also does what it claims.

  "mm: folio_pte_batch() improvements" (David Hildenbrand)
     cleans up the large folio PTE batching code.

  "mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park)
     facilitates dynamic alteration of DAMON's inter-node allocation
     policy.

  "Remove unmap_and_put_page()" (Vishal Moola)
     provides a couple of page->folio conversions.

  "mm: per-node proactive reclaim" (Davidlohr Bueso)
     implements a per-node control of proactive reclaim - beyond the
     current memcg-based implementation.

  "mm/damon: remove damon_callback" (SeongJae Park)
     replaces the damon_callback interface with a more general and
     powerful damon_call()+damos_walk() interface.

  "mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes)
     implements a number of mremap cleanups (of course) in preparation
     for adding new mremap() functionality: newly permit the remapping
     of multiple VMAs when the user is specifying MREMAP_FIXED. It still
     excludes some specialized situations where this cannot be performed
     reliably.

  "drop hugetlb_free_pgd_range()" (Anthony Yznaga)
     switches some sparc hugetlb code over to the generic version and
     removes the thus-unneeded hugetlb_free_pgd_range().

  "mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park)
     augments the present userspace-requested update of DAMON sysfs
     monitoring files. Automatic update is now provided, along with a
     tunable to control the update interval.

  "Some randome fixes and cleanups to swapfile" (Kemeng Shi)
     does what is claims.

  "mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand)
     provides (and uses) a means by which debug-style functions can grab
     a copy of a pageframe and inspect it locklessly without tripping
     over the races inherent in operating on the live pageframe
     directly.

  "use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan)
     addresses the large contention issues which can be triggered by
     reads from that procfs file. Latencies are reduced by more than
     half in some situations. The series also introduces several new
     selftests for the /proc/pid/maps interface.

  "__folio_split() clean up" (Zi Yan)
     cleans up __folio_split()!

  "Optimize mprotect() for large folios" (Dev Jain)
     provides some quite large (>3x) speedups to mprotect() when dealing
     with large folios.

  "selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian)
     does some cleanup work in the selftests code.

  "tools/testing: expand mremap testing" (Lorenzo Stoakes)
     extends the mremap() selftest in several ways, including adding
     more checking of Lorenzo's recently added "permit mremap() move of
     multiple VMAs" feature.

  "selftests/damon/sysfs.py: test all parameters" (SeongJae Park)
     extends the DAMON sysfs interface selftest so that it tests all
     possible user-requested parameters. Rather than the present minimal
     subset"

* tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits)
  MAINTAINERS: add missing headers to mempory policy & migration section
  MAINTAINERS: add missing file to cgroup section
  MAINTAINERS: add MM MISC section, add missing files to MISC and CORE
  MAINTAINERS: add missing zsmalloc file
  MAINTAINERS: add missing files to page alloc section
  MAINTAINERS: add missing shrinker files
  MAINTAINERS: move memremap.[ch] to hotplug section
  MAINTAINERS: add missing mm_slot.h file THP section
  MAINTAINERS: add missing interval_tree.c to memory mapping section
  MAINTAINERS: add missing percpu-internal.h file to per-cpu section
  mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info()
  selftests/damon: introduce _common.sh to host shared function
  selftests/damon/sysfs.py: test runtime reduction of DAMON parameters
  selftests/damon/sysfs.py: test non-default parameters runtime commit
  selftests/damon/sysfs.py: generalize DAMON context commit assertion
  selftests/damon/sysfs.py: generalize monitoring attributes commit assertion
  selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion
  selftests/damon/sysfs.py: test DAMOS filters commitment
  selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion
  selftests/damon/sysfs.py: test DAMOS destinations commitment
  ...
Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next 2025-07-30T15:58:55+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-07-30T15:58:55+00:00 8be4d31cb8aaeea27bde4b7ddb26e28a89062ebf Pull networking updates from Jakub Kicinski: "Core & protocols: - Wrap datapath globals into net_aligned_data, to avoid false sharing - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container) - Add SO_INQ and SCM_INQ support to AF_UNIX - Add SIOCINQ support to AF_VSOCK - Add TCP_MAXSEG sockopt to MPTCP - Add IPv6 force_forwarding sysctl to enable forwarding per interface - Make TCP validation of whether packet fully fits in the receive window and the rcv_buf more strict. With increased use of HW aggregation a single "packet" can be multiple 100s of kB - Add MSG_MORE flag to optimize large TCP transmissions via sockmap, improves latency up to 33% for sockmap users - Convert TCP send queue handling from tasklet to BH workque - Improve BPF iteration over TCP sockets to see each socket exactly once - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code - Support enabling kernel threads for NAPI processing on per-NAPI instance basis rather than a whole device. Fully stop the kernel NAPI thread when threaded NAPI gets disabled. Previously thread would stick around until ifdown due to tricky synchronization - Allow multicast routing to take effect on locally-generated packets - Add output interface argument for End.X in segment routing - MCTP: add support for gateway routing, improve bind() handling - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink - Add a new neighbor flag ("extern_valid"), which cedes refresh responsibilities to userspace. This is needed for EVPN multi-homing where a neighbor entry for a multi-homed host needs to be synced across all the VTEPs among which the host is multi-homed - Support NUD_PERMANENT for proxy neighbor entries - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM - Add sequence numbers to netconsole messages. Unregister netconsole's console when all net targets are removed. Code refactoring. Add a number of selftests - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol should be used for an inbound SA lookup - Support inspecting ref_tracker state via DebugFS - Don't force bonding advertisement frames tx to ~333 ms boundaries. Add broadcast_neighbor option to send ARP/ND on all bonded links - Allow providing upcall pid for the 'execute' command in openvswitch - Remove DCCP support from Netfilter's conntrack - Disallow multiple packet duplications in the queuing layer - Prevent use of deprecated iptables code on PREEMPT_RT Driver API: - Support RSS and hashing configuration over ethtool Netlink - Add dedicated ethtool callbacks for getting and setting hashing fields - Add support for power budget evaluation strategy in PSE / Power-over-Ethernet. Generate Netlink events for overcurrent etc - Support DPLL phase offset monitoring across all device inputs. Support providing clock reference and SYNC over separate DPLL inputs - Support traffic classes in devlink rate API for bandwidth management - Remove rtnl_lock dependency from UDP tunnel port configuration Device drivers: - Add a new Broadcom driver for 800G Ethernet (bnge) - Add a standalone driver for Microchip ZL3073x DPLL - Remove IBM's NETIUCV device driver - Ethernet high-speed NICs: - Broadcom (bnxt): - support zero-copy Tx of DMABUF memory - take page size into account for page pool recycling rings - Intel (100G, ice, idpf): - idpf: XDP and AF_XDP support preparations - idpf: add flow steering - add link_down_events statistic - clean up the TSPLL code - preparations for live VM migration - nVidia/Mellanox: - support zero-copy Rx/Tx interfaces (DMABUF and io_uring) - optimize context memory usage for matchers - expose serial numbers in devlink info - support PCIe congestion metrics - Meta (fbnic): - add 25G, 50G, and 100G link modes to phylink - support dumping FW logs - Marvell/Cavium: - support for CN20K generation of the Octeon chips - Amazon: - add HW clock (without timestamping, just hypervisor time access) - Ethernet virtual: - VirtIO net: - support segmentation of UDP-tunnel-encapsulated packets - Google (gve): - support packet timestamping and clock synchronization - Microsoft vNIC: - add handler for device-originated servicing events - allow dynamic MSI-X vector allocation - support Tx bandwidth clamping - Ethernet NICs consumer, and embedded: - AMD: - amd-xgbe: hardware timestamping and PTP clock support - Broadcom integrated MACs (bcmgenet, bcmasp): - use napi_complete_done() return value to support NAPI polling - add support for re-starting auto-negotiation - Broadcom switches (b53): - support BCM5325 switches - add bcm63xx EPHY power control - Synopsys (stmmac): - lots of code refactoring and cleanups - TI: - icssg-prueth: read firmware-names from device tree - icssg: PRP offload support - Microchip: - lan78xx: convert to PHYLINK for improved PHY and MAC management - ksz: add KSZ8463 switch support - Intel: - support similar queue priority scheme in multi-queue and time-sensitive networking (taprio) - support packet pre-emption in both - RealTek (r8169): - enable EEE at 5Gbps on RTL8126 - Airoha: - add PPPoE offload support - MDIO bus controller for Airoha AN7583 - Ethernet PHYs: - support for the IPQ5018 internal GE PHY - micrel KSZ9477 switch-integrated PHYs: - add MDI/MDI-X control support - add RX error counters - add cable test support - add Signal Quality Indicator (SQI) reporting - dp83tg720: improve reset handling and reduce link recovery time - support bcm54811 (and its MII-Lite interface type) - air_en8811h: support resume/suspend - support PHY counters for QCA807x and QCA808x - support WoL for QCA807x - CAN drivers: - rcar_canfd: support for Transceiver Delay Compensation - kvaser: report FW versions via devlink dev info - WiFi: - extended regulatory info support (6 GHz) - add statistics and beacon monitor for Multi-Link Operation (MLO) - support S1G aggregation, improve S1G support - add Radio Measurement action fields - support per-radio RTS threshold - some work around how FIPS affects wifi, which was wrong (RC4 is used by TKIP, not only WEP) - improvements for unsolicited probe response handling - WiFi drivers: - RealTek (rtw88): - IBSS mode for SDIO devices - RealTek (rtw89): - BT coexistence for MLO/WiFi7 - concurrent station + P2P support - support for USB devices RTL8851BU/RTL8852BU - Intel (iwlwifi): - use embedded PNVM in (to be released) FW images to fix compatibility issues - many cleanups (unused FW APIs, PCIe code, WoWLAN) - some FIPS interoperability - MediaTek (mt76): - firmware recovery improvements - more MLO work - Qualcomm/Atheros (ath12k): - fix scan on multi-radio devices - more EHT/Wi-Fi 7 features - encapsulation/decapsulation offload - Broadcom (brcm80211): - support SDIO 43751 device - Bluetooth: - hci_event: add support for handling LE BIG Sync Lost event - ISO: add socket option to report packet seqnum via CMSG - ISO: support SCM_TIMESTAMPING for ISO TS - Bluetooth drivers: - intel_pcie: support Function Level Reset - nxpuart: add support for 4M baudrate - nxpuart: implement powerup sequence, reset, FW dump, and FW loading" * tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits) dpll: zl3073x: Fix build failure selftests: bpf: fix legacy netfilter options ipv6: annotate data-races around rt->fib6_nsiblings ipv6: fix possible infinite loop in fib6_info_uses_dev() ipv6: prevent infinite loop in rt6_nlmsg_size() ipv6: add a retry logic in net6_rt_notify() vrf: Drop existing dst reference in vrf_ip6_input_dst net/sched: taprio: align entry index attr validation with mqprio net: fsl_pq_mdio: use dev_err_probe selftests: rtnetlink.sh: remove esp4_offload after test vsock: remove unnecessary null check in vsock_getname() igb: xsk: solve negative overflow of nb_pkts in zerocopy mode stmmac: xsk: fix negative overflow of budget in zerocopy mode dt-bindings: ieee802154: Convert at86rf230.txt yaml format net: dsa: microchip: Disable PTP function of KSZ8463 net: dsa: microchip: Setup fiber ports for KSZ8463 net: dsa: microchip: Write switch MAC address differently for KSZ8463 net: dsa: microchip: Use different registers for KSZ8463 net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver dt-bindings: net: dsa: microchip: Add KSZ8463 switch support ... 
Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Wrap datapath globals into net_aligned_data, to avoid false sharing

   - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)

   - Add SO_INQ and SCM_INQ support to AF_UNIX

   - Add SIOCINQ support to AF_VSOCK

   - Add TCP_MAXSEG sockopt to MPTCP

   - Add IPv6 force_forwarding sysctl to enable forwarding per interface

   - Make TCP validation of whether packet fully fits in the receive
     window and the rcv_buf more strict. With increased use of HW
     aggregation a single "packet" can be multiple 100s of kB

   - Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
     improves latency up to 33% for sockmap users

   - Convert TCP send queue handling from tasklet to BH workque

   - Improve BPF iteration over TCP sockets to see each socket exactly
     once

   - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code

   - Support enabling kernel threads for NAPI processing on per-NAPI
     instance basis rather than a whole device. Fully stop the kernel
     NAPI thread when threaded NAPI gets disabled. Previously thread
     would stick around until ifdown due to tricky synchronization

   - Allow multicast routing to take effect on locally-generated packets

   - Add output interface argument for End.X in segment routing

   - MCTP: add support for gateway routing, improve bind() handling

   - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink

   - Add a new neighbor flag ("extern_valid"), which cedes refresh
     responsibilities to userspace. This is needed for EVPN multi-homing
     where a neighbor entry for a multi-homed host needs to be synced
     across all the VTEPs among which the host is multi-homed

   - Support NUD_PERMANENT for proxy neighbor entries

   - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM

   - Add sequence numbers to netconsole messages. Unregister
     netconsole's console when all net targets are removed. Code
     refactoring. Add a number of selftests

   - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
     should be used for an inbound SA lookup

   - Support inspecting ref_tracker state via DebugFS

   - Don't force bonding advertisement frames tx to ~333 ms boundaries.
     Add broadcast_neighbor option to send ARP/ND on all bonded links

   - Allow providing upcall pid for the 'execute' command in openvswitch

   - Remove DCCP support from Netfilter's conntrack

   - Disallow multiple packet duplications in the queuing layer

   - Prevent use of deprecated iptables code on PREEMPT_RT

  Driver API:

   - Support RSS and hashing configuration over ethtool Netlink

   - Add dedicated ethtool callbacks for getting and setting hashing
     fields

   - Add support for power budget evaluation strategy in PSE /
     Power-over-Ethernet. Generate Netlink events for overcurrent etc

   - Support DPLL phase offset monitoring across all device inputs.
     Support providing clock reference and SYNC over separate DPLL
     inputs

   - Support traffic classes in devlink rate API for bandwidth
     management

   - Remove rtnl_lock dependency from UDP tunnel port configuration

  Device drivers:

   - Add a new Broadcom driver for 800G Ethernet (bnge)

   - Add a standalone driver for Microchip ZL3073x DPLL

   - Remove IBM's NETIUCV device driver

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support zero-copy Tx of DMABUF memory
         - take page size into account for page pool recycling rings
      - Intel (100G, ice, idpf):
         - idpf: XDP and AF_XDP support preparations
         - idpf: add flow steering
         - add link_down_events statistic
         - clean up the TSPLL code
         - preparations for live VM migration
      - nVidia/Mellanox:
         - support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
         - optimize context memory usage for matchers
         - expose serial numbers in devlink info
         - support PCIe congestion metrics
      - Meta (fbnic):
         - add 25G, 50G, and 100G link modes to phylink
         - support dumping FW logs
      - Marvell/Cavium:
         - support for CN20K generation of the Octeon chips
      - Amazon:
         - add HW clock (without timestamping, just hypervisor time access)

   - Ethernet virtual:
      - VirtIO net:
         - support segmentation of UDP-tunnel-encapsulated packets
      - Google (gve):
         - support packet timestamping and clock synchronization
      - Microsoft vNIC:
         - add handler for device-originated servicing events
         - allow dynamic MSI-X vector allocation
         - support Tx bandwidth clamping

   - Ethernet NICs consumer, and embedded:
      - AMD:
         - amd-xgbe: hardware timestamping and PTP clock support
      - Broadcom integrated MACs (bcmgenet, bcmasp):
         - use napi_complete_done() return value to support NAPI polling
         - add support for re-starting auto-negotiation
      - Broadcom switches (b53):
         - support BCM5325 switches
         - add bcm63xx EPHY power control
      - Synopsys (stmmac):
         - lots of code refactoring and cleanups
      - TI:
         - icssg-prueth: read firmware-names from device tree
         - icssg: PRP offload support
      - Microchip:
         - lan78xx: convert to PHYLINK for improved PHY and MAC management
         - ksz: add KSZ8463 switch support
      - Intel:
         - support similar queue priority scheme in multi-queue and
           time-sensitive networking (taprio)
         - support packet pre-emption in both
      - RealTek (r8169):
         - enable EEE at 5Gbps on RTL8126
      - Airoha:
         - add PPPoE offload support
         - MDIO bus controller for Airoha AN7583

   - Ethernet PHYs:
      - support for the IPQ5018 internal GE PHY
      - micrel KSZ9477 switch-integrated PHYs:
         - add MDI/MDI-X control support
         - add RX error counters
         - add cable test support
         - add Signal Quality Indicator (SQI) reporting
      - dp83tg720: improve reset handling and reduce link recovery time
      - support bcm54811 (and its MII-Lite interface type)
      - air_en8811h: support resume/suspend
      - support PHY counters for QCA807x and QCA808x
      - support WoL for QCA807x

   - CAN drivers:
      - rcar_canfd: support for Transceiver Delay Compensation
      - kvaser: report FW versions via devlink dev info

   - WiFi:
      - extended regulatory info support (6 GHz)
      - add statistics and beacon monitor for Multi-Link Operation (MLO)
      - support S1G aggregation, improve S1G support
      - add Radio Measurement action fields
      - support per-radio RTS threshold
      - some work around how FIPS affects wifi, which was wrong (RC4 is
        used by TKIP, not only WEP)
      - improvements for unsolicited probe response handling

   - WiFi drivers:
      - RealTek (rtw88):
         - IBSS mode for SDIO devices
      - RealTek (rtw89):
         - BT coexistence for MLO/WiFi7
         - concurrent station + P2P support
         - support for USB devices RTL8851BU/RTL8852BU
      - Intel (iwlwifi):
         - use embedded PNVM in (to be released) FW images to fix
           compatibility issues
         - many cleanups (unused FW APIs, PCIe code, WoWLAN)
         - some FIPS interoperability
      - MediaTek (mt76):
         - firmware recovery improvements
         - more MLO work
      - Qualcomm/Atheros (ath12k):
         - fix scan on multi-radio devices
         - more EHT/Wi-Fi 7 features
         - encapsulation/decapsulation offload
      - Broadcom (brcm80211):
         - support SDIO 43751 device

   - Bluetooth:
      - hci_event: add support for handling LE BIG Sync Lost event
      - ISO: add socket option to report packet seqnum via CMSG
      - ISO: support SCM_TIMESTAMPING for ISO TS

   - Bluetooth drivers:
      - intel_pcie: support Function Level Reset
      - nxpuart: add support for 4M baudrate
      - nxpuart: implement powerup sequence, reset, FW dump, and FW loading"

* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
  dpll: zl3073x: Fix build failure
  selftests: bpf: fix legacy netfilter options
  ipv6: annotate data-races around rt->fib6_nsiblings
  ipv6: fix possible infinite loop in fib6_info_uses_dev()
  ipv6: prevent infinite loop in rt6_nlmsg_size()
  ipv6: add a retry logic in net6_rt_notify()
  vrf: Drop existing dst reference in vrf_ip6_input_dst
  net/sched: taprio: align entry index attr validation with mqprio
  net: fsl_pq_mdio: use dev_err_probe
  selftests: rtnetlink.sh: remove esp4_offload after test
  vsock: remove unnecessary null check in vsock_getname()
  igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
  stmmac: xsk: fix negative overflow of budget in zerocopy mode
  dt-bindings: ieee802154: Convert at86rf230.txt yaml format
  net: dsa: microchip: Disable PTP function of KSZ8463
  net: dsa: microchip: Setup fiber ports for KSZ8463
  net: dsa: microchip: Write switch MAC address differently for KSZ8463
  net: dsa: microchip: Use different registers for KSZ8463
  net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
  dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
  ...
powerpc64/bpf: Add jit support for load_acquire and store_release 2025-07-28T02:43:35+00:00 Puranjay Mohan puranjay@kernel.org 2025-07-17T20:29:17+00:00 cf2a6de32cabbf84a889e24a9ee7c51dee4a1f70 Add JIT support for the load_acquire and store_release instructions. The implementation is similar to the kernel where: load_acquire => plain load -> lwsync store_release => lwsync -> plain store To test the correctness of the implementation, following selftests were run: [fedora@linux-kernel bpf]$ sudo ./test_progs -a \ verifier_load_acquire,verifier_store_release,atomics #11/1 atomics/add:OK #11/2 atomics/sub:OK #11/3 atomics/and:OK #11/4 atomics/or:OK #11/5 atomics/xor:OK #11/6 atomics/cmpxchg:OK #11/7 atomics/xchg:OK #11 atomics:OK #519/1 verifier_load_acquire/load-acquire, 8-bit:OK #519/2 verifier_load_acquire/load-acquire, 8-bit @unpriv:OK #519/3 verifier_load_acquire/load-acquire, 16-bit:OK #519/4 verifier_load_acquire/load-acquire, 16-bit @unpriv:OK #519/5 verifier_load_acquire/load-acquire, 32-bit:OK #519/6 verifier_load_acquire/load-acquire, 32-bit @unpriv:OK #519/7 verifier_load_acquire/load-acquire, 64-bit:OK #519/8 verifier_load_acquire/load-acquire, 64-bit @unpriv:OK #519/9 verifier_load_acquire/load-acquire with uninitialized src_reg:OK #519/10 verifier_load_acquire/load-acquire with uninitialized src_reg @unpriv:OK #519/11 verifier_load_acquire/load-acquire with non-pointer src_reg:OK #519/12 verifier_load_acquire/load-acquire with non-pointer src_reg @unpriv:OK #519/13 verifier_load_acquire/misaligned load-acquire:OK #519/14 verifier_load_acquire/misaligned load-acquire @unpriv:OK #519/15 verifier_load_acquire/load-acquire from ctx pointer:OK #519/16 verifier_load_acquire/load-acquire from ctx pointer @unpriv:OK #519/17 verifier_load_acquire/load-acquire with invalid register R15:OK #519/18 verifier_load_acquire/load-acquire with invalid register R15 @unpriv:OK #519/19 verifier_load_acquire/load-acquire from pkt pointer:OK #519/20 verifier_load_acquire/load-acquire from flow_keys pointer:OK #519/21 verifier_load_acquire/load-acquire from sock pointer:OK #519 verifier_load_acquire:OK #556/1 verifier_store_release/store-release, 8-bit:OK #556/2 verifier_store_release/store-release, 8-bit @unpriv:OK #556/3 verifier_store_release/store-release, 16-bit:OK #556/4 verifier_store_release/store-release, 16-bit @unpriv:OK #556/5 verifier_store_release/store-release, 32-bit:OK #556/6 verifier_store_release/store-release, 32-bit @unpriv:OK #556/7 verifier_store_release/store-release, 64-bit:OK #556/8 verifier_store_release/store-release, 64-bit @unpriv:OK #556/9 verifier_store_release/store-release with uninitialized src_reg:OK #556/10 verifier_store_release/store-release with uninitialized src_reg @unpriv:OK #556/11 verifier_store_release/store-release with uninitialized dst_reg:OK #556/12 verifier_store_release/store-release with uninitialized dst_reg @unpriv:OK #556/13 verifier_store_release/store-release with non-pointer dst_reg:OK #556/14 verifier_store_release/store-release with non-pointer dst_reg @unpriv:OK #556/15 verifier_store_release/misaligned store-release:OK #556/16 verifier_store_release/misaligned store-release @unpriv:OK #556/17 verifier_store_release/store-release to ctx pointer:OK #556/18 verifier_store_release/store-release to ctx pointer @unpriv:OK #556/19 verifier_store_release/store-release, leak pointer to stack:OK #556/20 verifier_store_release/store-release, leak pointer to stack @unpriv:OK #556/21 verifier_store_release/store-release, leak pointer to map:OK #556/22 verifier_store_release/store-release, leak pointer to map @unpriv:OK #556/23 verifier_store_release/store-release with invalid register R15:OK #556/24 verifier_store_release/store-release with invalid register R15 @unpriv:OK #556/25 verifier_store_release/store-release to pkt pointer:OK #556/26 verifier_store_release/store-release to flow_keys pointer:OK #556/27 verifier_store_release/store-release to sock pointer:OK #556 verifier_store_release:OK Summary: 3/55 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Puranjay Mohan <puranjay@kernel.org> Tested-by: Saket Kumar Bhaskar <skb99@linux.ibm.com> Reviewed-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250717202935.29018-2-puranjay@kernel.org 
Add JIT support for the load_acquire and store_release instructions. The
implementation is similar to the kernel where:

        load_acquire  => plain load -> lwsync
        store_release => lwsync -> plain store

To test the correctness of the implementation, following selftests were
run:

  [fedora@linux-kernel bpf]$ sudo ./test_progs -a \
  verifier_load_acquire,verifier_store_release,atomics
  #11/1    atomics/add:OK
  #11/2    atomics/sub:OK
  #11/3    atomics/and:OK
  #11/4    atomics/or:OK
  #11/5    atomics/xor:OK
  #11/6    atomics/cmpxchg:OK
  #11/7    atomics/xchg:OK
  #11      atomics:OK
  #519/1   verifier_load_acquire/load-acquire, 8-bit:OK
  #519/2   verifier_load_acquire/load-acquire, 8-bit @unpriv:OK
  #519/3   verifier_load_acquire/load-acquire, 16-bit:OK
  #519/4   verifier_load_acquire/load-acquire, 16-bit @unpriv:OK
  #519/5   verifier_load_acquire/load-acquire, 32-bit:OK
  #519/6   verifier_load_acquire/load-acquire, 32-bit @unpriv:OK
  #519/7   verifier_load_acquire/load-acquire, 64-bit:OK
  #519/8   verifier_load_acquire/load-acquire, 64-bit @unpriv:OK
  #519/9   verifier_load_acquire/load-acquire with uninitialized
  src_reg:OK
  #519/10  verifier_load_acquire/load-acquire with uninitialized src_reg
  @unpriv:OK
  #519/11  verifier_load_acquire/load-acquire with non-pointer src_reg:OK
  #519/12  verifier_load_acquire/load-acquire with non-pointer src_reg
  @unpriv:OK
  #519/13  verifier_load_acquire/misaligned load-acquire:OK
  #519/14  verifier_load_acquire/misaligned load-acquire @unpriv:OK
  #519/15  verifier_load_acquire/load-acquire from ctx pointer:OK
  #519/16  verifier_load_acquire/load-acquire from ctx pointer @unpriv:OK
  #519/17  verifier_load_acquire/load-acquire with invalid register R15:OK
  #519/18  verifier_load_acquire/load-acquire with invalid register R15
  @unpriv:OK
  #519/19  verifier_load_acquire/load-acquire from pkt pointer:OK
  #519/20  verifier_load_acquire/load-acquire from flow_keys pointer:OK
  #519/21  verifier_load_acquire/load-acquire from sock pointer:OK
  #519     verifier_load_acquire:OK
  #556/1   verifier_store_release/store-release, 8-bit:OK
  #556/2   verifier_store_release/store-release, 8-bit @unpriv:OK
  #556/3   verifier_store_release/store-release, 16-bit:OK
  #556/4   verifier_store_release/store-release, 16-bit @unpriv:OK
  #556/5   verifier_store_release/store-release, 32-bit:OK
  #556/6   verifier_store_release/store-release, 32-bit @unpriv:OK
  #556/7   verifier_store_release/store-release, 64-bit:OK
  #556/8   verifier_store_release/store-release, 64-bit @unpriv:OK
  #556/9   verifier_store_release/store-release with uninitialized
  src_reg:OK
  #556/10  verifier_store_release/store-release with uninitialized src_reg
  @unpriv:OK
  #556/11  verifier_store_release/store-release with uninitialized
  dst_reg:OK
  #556/12  verifier_store_release/store-release with uninitialized dst_reg
  @unpriv:OK
  #556/13  verifier_store_release/store-release with non-pointer
  dst_reg:OK
  #556/14  verifier_store_release/store-release with non-pointer dst_reg
  @unpriv:OK
  #556/15  verifier_store_release/misaligned store-release:OK
  #556/16  verifier_store_release/misaligned store-release @unpriv:OK
  #556/17  verifier_store_release/store-release to ctx pointer:OK
  #556/18  verifier_store_release/store-release to ctx pointer @unpriv:OK
  #556/19  verifier_store_release/store-release, leak pointer to stack:OK
  #556/20  verifier_store_release/store-release, leak pointer to stack
  @unpriv:OK
  #556/21  verifier_store_release/store-release, leak pointer to map:OK
  #556/22  verifier_store_release/store-release, leak pointer to map
  @unpriv:OK
  #556/23  verifier_store_release/store-release with invalid register
  R15:OK
  #556/24  verifier_store_release/store-release with invalid register R15
  @unpriv:OK
  #556/25  verifier_store_release/store-release to pkt pointer:OK
  #556/26  verifier_store_release/store-release to flow_keys pointer:OK
  #556/27  verifier_store_release/store-release to sock pointer:OK
  #556     verifier_store_release:OK
  Summary: 3/55 PASSED, 0 SKIPPED, 0 FAILED

Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Tested-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250717202935.29018-2-puranjay@kernel.org
ibmveth: Add multi buffers rx replenishment hcall support 2025-07-22T13:08:23+00:00 Mingming Cao mmc@linux.ibm.com 2025-07-19T09:13:56+00:00 2094200b5f77e6710f9594571889f64f31966de1 This patch enables batched RX buffer replenishment in ibmveth by using the new firmware-supported h_add_logical_lan_buffers() hcall to submit up to 8 RX buffers in a single call, instead of repeatedly calling the single-buffer h_add_logical_lan_buffer() hcall. During the probe, with the patch, the driver queries ILLAN attributes to detect IBMVETH_ILLAN_RX_MULTI_BUFF_SUPPORT bit. If the attribute is present, rx_buffers_per_hcall is set to 8, enabling batched replenishment. Otherwise, it defaults to 1, preserving the original upstream behavior with no change in code flow for unsupported systems. The core rx replenish logic remains the same. But when batching is enabled, the driver aggregates up to 8 fully prepared descriptors into a single h_add_logical_lan_buffers() hypercall. If any allocation or DMA mapping fails while preparing a batch, only the successfully prepared buffers are submitted, and the remaining are deferred for the next replenish cycle. If at runtime the firmware stops accepting the batched hcall—e,g, after a Live Partition Migration (LPM) to a host that does not support h_add_logical_lan_buffers(), the hypercall returns H_FUNCTION. In that case, the driver transparently disables batching, resets rx_buffers_per_hcall to 1, and falls back to the single-buffer hcall in next future replenishments to take care of these and future buffers. Test were done on systems with firmware that both supports and does not support the new h_add_logical_lan_buffers hcall. On supported firmware, this reduces hypercall overhead significantly over multiple buffers. SAR measurements showed about a 15% improvement in packet processing rate under moderate RX load, with heavier traffic seeing gains more than 30% Signed-off-by: Mingming Cao <mmc@linux.ibm.com> Reviewed-by: Brian King <bjking1@linux.ibm.com> Reviewed-by: Haren Myneni <haren@linux.ibm.com> Reviewed-by: Dave Marquardt <davemarq@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250719091356.57252-1-mmc@linux.ibm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 
This patch enables batched RX buffer replenishment in ibmveth by
using the new firmware-supported h_add_logical_lan_buffers() hcall
 to submit up to 8 RX buffers in a single call, instead of repeatedly
calling the single-buffer h_add_logical_lan_buffer() hcall.

During the probe, with the patch, the driver queries ILLAN attributes
to detect IBMVETH_ILLAN_RX_MULTI_BUFF_SUPPORT bit. If the attribute is
present, rx_buffers_per_hcall is set to 8, enabling batched replenishment.
Otherwise, it defaults to 1, preserving the original upstream behavior
 with no change in code flow for unsupported systems.

The core rx replenish logic remains the same. But when batching
is enabled, the driver aggregates up to 8 fully prepared descriptors
into a single h_add_logical_lan_buffers() hypercall. If any allocation
or DMA mapping fails while preparing a batch, only the successfully
prepared buffers are submitted, and the remaining are deferred for
the next replenish cycle.

If at runtime the firmware stops accepting the batched hcall—e,g,
after a Live Partition Migration (LPM) to a host that does not
support h_add_logical_lan_buffers(), the hypercall returns H_FUNCTION.
In that case, the driver transparently disables batching, resets
rx_buffers_per_hcall to 1, and falls back to the single-buffer hcall
in next future replenishments to take care of these and future buffers.

Test were done on systems with firmware that both supports and
does not support the new h_add_logical_lan_buffers hcall.

On supported firmware, this reduces hypercall overhead significantly
over multiple buffers. SAR measurements showed about a 15% improvement
in packet processing rate under moderate RX load, with heavier traffic
seeing gains more than 30%

Signed-off-by: Mingming Cao <mmc@linux.ibm.com>
Reviewed-by: Brian King <bjking1@linux.ibm.com>
Reviewed-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Dave Marquardt <davemarq@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250719091356.57252-1-mmc@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
powerpc: Drop GPL boilerplate text with obsolete FSF address 2025-07-22T08:51:19+00:00 Thomas Huth thuth@redhat.com 2025-07-11T07:25:53+00:00 69bf2053608423cbe348f4c5d4f8d737e607d1ad The FSF does not reside in the Franklin street anymore, so we should not request the people to write to this address. Fortunately, these header files already contain a proper SPDX license identifier, so it should be fine to simply drop all of this license boilerplate code here. Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250711072553.198777-1-thuth@redhat.com 
The FSF does not reside in the Franklin street anymore, so we should not
request the people to write to this address. Fortunately, these header
files already contain a proper SPDX license identifier, so it should be
fine to simply drop all of this license boilerplate code here.

Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250711072553.198777-1-thuth@redhat.com
mm: remove devmap related functions and page table bits 2025-07-10T05:42:18+00:00 Alistair Popple apopple@nvidia.com 2025-06-19T08:58:03+00:00 d438d273417055241ebaaf1ba3be23459fc27cba Now that DAX and all other reference counts to ZONE_DEVICE pages are managed normally there is no need for the special devmap PTE/PMD/PUD page table bits. So drop all references to these, freeing up a software defined page table bit on architectures supporting it. Link: https://lkml.kernel.org/r/6389398c32cc9daa3dfcaa9f79c7972525d310ce.1750323463.git-series.apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Acked-by: Will Deacon <will@kernel.org> # arm64 Acked-by: David Hildenbrand <david@redhat.com> Suggested-by: Chunyan Zhang <zhang.lyra@gmail.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Cc: Balbir Singh <balbirs@nvidia.com> Cc: Björn Töpel <bjorn@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Deepak Gupta <debug@rivosinc.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Inki Dae <m.szyprowski@samsung.com> Cc: John Groves <john@groves.net> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 
Now that DAX and all other reference counts to ZONE_DEVICE pages are
managed normally there is no need for the special devmap PTE/PMD/PUD page
table bits.  So drop all references to these, freeing up a software
defined page table bit on architectures supporting it.

Link: https://lkml.kernel.org/r/6389398c32cc9daa3dfcaa9f79c7972525d310ce.1750323463.git-series.apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Acked-by: Will Deacon <will@kernel.org> # arm64
Acked-by: David Hildenbrand <david@redhat.com>
Suggested-by: Chunyan Zhang <zhang.lyra@gmail.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: Björn Töpel <bjorn@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Deepak Gupta <debug@rivosinc.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Inki Dae <m.szyprowski@samsung.com>
Cc: John Groves <john@groves.net>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>