linux-stable.git/arch/powerpc/include/asm/processor.h, branch v3.9

powerpc: New macros for transactional memory support

2013-02-15T05:58:50+00:00

This adds new macros for saving and restoring checkpointed architected state
from and to the thread_struct.

It also adds some debugging macros for when your brain explodes trying to debug
your transactional memory enabled kernel.

Signed-off-by: Matt Evans 
Signed-off-by: Michael Neuling 
Signed-off-by: Benjamin Herrenschmidt

powerpc: Add additional state needed for transactional memory to thread struct

2013-02-15T05:58:50+00:00

Set of new archtected state for saving away on context switch.

Signed-off-by: Matt Evans 
Signed-off-by: Michael Neuling 
Signed-off-by: Benjamin Herrenschmidt

powerpc: Add support for context switching the TAR register

2013-02-08T03:05:50+00:00

This patch adds support for enabling and context switching the Target
Address Register in Power8. The TAR is a new special purpose register
that can be used for computed branches with the bctar[l] (branch
conditional to TAR) instruction in the same manner as the count and link
registers.

Signed-off-by: Ian Munsie 
Signed-off-by: Matt Evans 
Signed-off-by: Benjamin Herrenschmidt

powerpc: Hardware breakpoints rewrite to handle non DABR breakpoint registers

2013-01-10T06:01:44+00:00

This is a rewrite so that we don't assume we are using the DABR throughout the
code.  We now use the arch_hw_breakpoint to store the breakpoint in a generic
manner in the thread_struct, rather than storing the raw DABR value.

The ptrace GET/SET_DEBUGREG interface currently passes the raw DABR in from
userspace.  We keep this functionality, so that future changes (like the POWER8
DAWR), will still fake the DABR to userspace.

Signed-off-by: Michael Neuling 
Signed-off-by: Benjamin Herrenschmidt

powerpc: Define ppr in thread_struct

2013-01-10T06:01:08+00:00

[PATCH 4/6] powerpc: Define ppr in thread_struct

ppr in thread_struct is used to save PPR and restore it before process exits
from kernel.

This patch sets the default priority to 3 when tasks are created such
that users can use 4 for higher priority tasks.

Signed-off-by: Haren Myneni 
Signed-off-by: Benjamin Herrenschmidt

cpuidle/powerpc: Fix smt_snooze_delay functionality.

2012-10-17T23:57:24+00:00

smt_snooze_delay was designed to  delay idle loop's nap entry
in the native idle code before it got  ported over to use as part of
the cpuidle framework.

A -ve value  assigned to smt_snooze_delay should result in
busy looping, in other words disabling the entry to nap state.

	- https://lists.ozlabs.org/pipermail/linuxppc-dev/2010-May/082450.html

This particular functionality can be achieved currently by
echo 1 > /sys/devices/system/cpu/cpu*/state1/disable
but it is broken when one assigns -ve value to  the smt_snooze_delay
variable either via sysfs entry or ppc64_cpu util.

This patch aims to fix this, by disabling nap state when smt_snooze_delay
variable is set to -ve value.

Signed-off-by: Deepthi Dharwar 
Signed-off-by: Benjamin Herrenschmidt

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal

2012-10-12T01:49:08+00:00

Pull pile 2 of execve and kernel_thread unification work from Al Viro:
 "Stuff in there: kernel_thread/kernel_execve/sys_execve conversions for
  several more architectures plus assorted signal fixes and cleanups.

  There'll be more (in particular, real fixes for the alpha
  do_notify_resume() irq mess)..."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (43 commits)
  alpha: don't open-code trace_report_syscall_{enter,exit}
  Uninclude linux/freezer.h
  m32r: trim masks
  avr32: trim masks
  tile: don't bother with SIGTRAP in setup_frame
  microblaze: don't bother with SIGTRAP in setup_rt_frame()
  mn10300: don't bother with SIGTRAP in setup_frame()
  frv: no need to raise SIGTRAP in setup_frame()
  x86: get rid of duplicate code in case of CONFIG_VM86
  unicore32: remove pointless test
  h8300: trim _TIF_WORK_MASK
  parisc: decide whether to go to slow path (tracesys) based on thread flags
  parisc: don't bother looping in do_signal()
  parisc: fix double restarts
  bury the rest of TIF_IRET
  sanitize tsk_is_polling()
  bury _TIF_RESTORE_SIGMASK
  unicore32: unobfuscate _TIF_WORK_MASK
  mips: NOTIFY_RESUME is not needed in TIF masks
  mips: merge the identical "return from syscall" per-ABI code
  ...

Conflicts:
	arch/arm/include/asm/thread_info.h

powerpc: split ret_from_fork

2012-10-01T03:31:19+00:00

... and get rid of in-kernel syscalls in kernel_thread()

Signed-off-by: Al Viro

powerpc/mm: Add 64TB support

2012-09-17T06:31:51+00:00

Increase max addressable range to 64TB. This is not tested on
real hardware yet.

Reviewed-by: Paul Mackerras 
Signed-off-by: Aneesh Kumar K.V 
Signed-off-by: Benjamin Herrenschmidt

powerpc: Rework set_dabr so it can take a DABRX value as well

2012-09-09T23:59:10+00:00

Rework set_dabr to take a DABRX value as well.

Both the pseries and PS3 hypervisors do some checks on the DABRX
values that are passed in the hcall.  This patch stops bogus values
from being passed to hypervisor.  Also, in the case where we are
clearing the breakpoint, where DABR and DABRX are zero, we modify the
DABRX value to make it valid so that the hcall won't fail.

Signed-off-by: Michael Neuling 
Signed-off-by: Benjamin Herrenschmidt