linux-stable.git/arch/powerpc/include/asm/processor.h, branch v3.7

cpuidle/powerpc: Fix smt_snooze_delay functionality.

2012-10-17T23:57:24+00:00

smt_snooze_delay was designed to  delay idle loop's nap entry
in the native idle code before it got  ported over to use as part of
the cpuidle framework.

A -ve value  assigned to smt_snooze_delay should result in
busy looping, in other words disabling the entry to nap state.

	- https://lists.ozlabs.org/pipermail/linuxppc-dev/2010-May/082450.html

This particular functionality can be achieved currently by
echo 1 > /sys/devices/system/cpu/cpu*/state1/disable
but it is broken when one assigns -ve value to  the smt_snooze_delay
variable either via sysfs entry or ppc64_cpu util.

This patch aims to fix this, by disabling nap state when smt_snooze_delay
variable is set to -ve value.

Signed-off-by: Deepthi Dharwar 
Signed-off-by: Benjamin Herrenschmidt

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal

2012-10-12T01:49:08+00:00

Pull pile 2 of execve and kernel_thread unification work from Al Viro:
 "Stuff in there: kernel_thread/kernel_execve/sys_execve conversions for
  several more architectures plus assorted signal fixes and cleanups.

  There'll be more (in particular, real fixes for the alpha
  do_notify_resume() irq mess)..."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (43 commits)
  alpha: don't open-code trace_report_syscall_{enter,exit}
  Uninclude linux/freezer.h
  m32r: trim masks
  avr32: trim masks
  tile: don't bother with SIGTRAP in setup_frame
  microblaze: don't bother with SIGTRAP in setup_rt_frame()
  mn10300: don't bother with SIGTRAP in setup_frame()
  frv: no need to raise SIGTRAP in setup_frame()
  x86: get rid of duplicate code in case of CONFIG_VM86
  unicore32: remove pointless test
  h8300: trim _TIF_WORK_MASK
  parisc: decide whether to go to slow path (tracesys) based on thread flags
  parisc: don't bother looping in do_signal()
  parisc: fix double restarts
  bury the rest of TIF_IRET
  sanitize tsk_is_polling()
  bury _TIF_RESTORE_SIGMASK
  unicore32: unobfuscate _TIF_WORK_MASK
  mips: NOTIFY_RESUME is not needed in TIF masks
  mips: merge the identical "return from syscall" per-ABI code
  ...

Conflicts:
	arch/arm/include/asm/thread_info.h

powerpc: split ret_from_fork

2012-10-01T03:31:19+00:00

... and get rid of in-kernel syscalls in kernel_thread()

Signed-off-by: Al Viro

powerpc/mm: Add 64TB support

2012-09-17T06:31:51+00:00

Increase max addressable range to 64TB. This is not tested on
real hardware yet.

Reviewed-by: Paul Mackerras 
Signed-off-by: Aneesh Kumar K.V 
Signed-off-by: Benjamin Herrenschmidt

powerpc: Rework set_dabr so it can take a DABRX value as well

2012-09-09T23:59:10+00:00

Rework set_dabr to take a DABRX value as well.

Both the pseries and PS3 hypervisors do some checks on the DABRX
values that are passed in the hcall.  This patch stops bogus values
from being passed to hypervisor.  Also, in the case where we are
clearing the breakpoint, where DABR and DABRX are zero, we modify the
DABRX value to make it valid so that the hcall won't fail.

Signed-off-by: Michael Neuling 
Signed-off-by: Benjamin Herrenschmidt

Merge branch 'merge' into next

2012-09-06T23:48:59+00:00

Brings in various bug fixes from 3.6-rcX

powerpc/powernv: Always go into nap mode when CPU is offline

2012-09-05T06:05:20+00:00

The CPU hotplug code for the powernv platform currently only puts
offline CPUs into nap mode if the powersave_nap variable is set.
However, HV-style KVM on this platform requires secondary CPU threads
to be offline and in nap mode.  Since we know nap mode works just
fine on all POWER7 machines, and the only machines that support the
powernv platform are POWER7 machines, this changes the code to
always put offline CPUs into nap mode, regardless of powersave_nap.
Powersave_nap still controls whether or not CPUs go into nap mode
when idle, as before.

Signed-off-by: Paul Mackerras 
Signed-off-by: Benjamin Herrenschmidt

powerpc: Add trap_nr to thread_struct

2012-09-05T05:19:36+00:00

Add thread_struct.trap_nr and use it to store the last exception
the thread experienced. In this patch, we populate the field at
various places where we force_sig_info() to the process.

This is also used in uprobes to determine if the probed instruction
caused an exception.

Signed-off-by: Ananth N Mavinakayanahalli 
Signed-off-by: Benjamin Herrenschmidt

powerpc/pseries/cpuidle: Replace pseries_notify_cpuidle_add call with notifier

2012-07-03T04:14:40+00:00

The following patch is to remove the pseries_notify_add_cpu() call
and replace it by a hot plug notifier.

This would prevent cpuidle resources being released and allocated each
time cpu comes online on pseries.

The earlier design was causing a lockdep problem
in start_secondary as reported on this thread
	-https://lkml.org/lkml/2012/5/17/2

This applies on 3.4-rc7

Signed-off-by: Deepthi Dharwar 
Signed-off-by: Benjamin Herrenschmidt

Merge branch 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2012-05-24T23:17:30+00:00

Pull KVM changes from Avi Kivity:
 "Changes include additional instruction emulation, page-crossing MMIO,
  faster dirty logging, preventing the watchdog from killing a stopped
  guest, module autoload, a new MSI ABI, and some minor optimizations
  and fixes.  Outside x86 we have a small s390 and a very large ppc
  update.

  Regarding the new (for kvm) rebaseless workflow, some of the patches
  that were merged before we switch trees had to be rebased, while
  others are true pulls.  In either case the signoffs should be correct
  now."

Fix up trivial conflicts in Documentation/feature-removal-schedule.txt
arch/powerpc/kvm/book3s_segment.S and arch/x86/include/asm/kvm_para.h.

I suspect the kvm_para.h resolution ends up doing the "do I have cpuid"
check effectively twice (it was done differently in two different
commits), but better safe than sorry ;)

* 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (125 commits)
  KVM: make asm-generic/kvm_para.h have an ifdef __KERNEL__ block
  KVM: s390: onereg for timer related registers
  KVM: s390: epoch difference and TOD programmable field
  KVM: s390: KVM_GET/SET_ONEREG for s390
  KVM: s390: add capability indicating COW support
  KVM: Fix mmu_reload() clash with nested vmx event injection
  KVM: MMU: Don't use RCU for lockless shadow walking
  KVM: VMX: Optimize %ds, %es reload
  KVM: VMX: Fix %ds/%es clobber
  KVM: x86 emulator: convert bsf/bsr instructions to emulate_2op_SrcV_nobyte()
  KVM: VMX: unlike vmcs on fail path
  KVM: PPC: Emulator: clean up SPR reads and writes
  KVM: PPC: Emulator: clean up instruction parsing
  kvm/powerpc: Add new ioctl to retreive server MMU infos
  kvm/book3s: Make kernel emulated H_PUT_TCE available for "PR" KVM
  KVM: PPC: bookehv: Fix r8/r13 storing in level exception handler
  KVM: PPC: Book3S: Enable IRQs during exit handling
  KVM: PPC: Fix PR KVM on POWER7 bare metal
  KVM: PPC: Fix stbux emulation
  KVM: PPC: bookehv: Use lwz/stw instead of PPC_LL/PPC_STL for 32-bit fields
  ...