linux-stable.git/arch/powerpc/boot, branch v6.2

Merge tag 'powerpc-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2023-01-15T13:09:41+00:00

Pull powerpc fixes from Michael Ellerman:

 - Fix a build failure with some versions of ld that have an odd version
   string

 - Fix incorrect use of mutex in the IMC PMU driver

Thanks to Kajol Jain, Michael Petlan, Ojaswin Mujoo, Peter Zijlstra, and
Yang Yingliang.

* tag 'powerpc-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s/hash: Make stress_hpt_timer_fn() static
  powerpc/imc-pmu: Fix use of mutex in IRQs disabled section
  powerpc/boot: Fix incorrect version calculation issue in ld_version

powerpc/boot: Fix incorrect version calculation issue in ld_version

2023-01-11T05:28:43+00:00

The ld_version() function computes the wrong version value for certain
ld versions such as the following:

  $ ld --version
  GNU ld (GNU Binutils; SUSE Linux Enterprise 15)
  2.37.20211103-150100.7.37

For input 2.37.20211103, the value computed is 202348030000 which is
higher than the value for a later version like 2.39.0, which is
23900000.

This issue was highlighted because with the above ld version, the
powerpc kernel build started failing with ld error: "unrecognized option
--no-warn-rwx-segments". This was caused due to the recent commit
579aee9fc594 ("powerpc: suppress some linker warnings in recent linker
versions") which added the --no-warn-rwx-segments linker flag if the ld
version is greater than 2.39.

Due to the bug in ld_version(), ld version 2.37.20111103 is wrongly
calculated to be greater than 2.39 and the unsupported flag is added.

To fix it, if version is of the form x.y.z and length(z) == 8, then most
probably it is a date [yyyymmdd] commonly used for release snapshots and
not an actual new version. Hence, ignore the date part replacing it with
0.

Fixes: 579aee9fc594 ("powerpc: suppress some linker warnings in recent linker versions")
Signed-off-by: Ojaswin Mujoo 
[mpe: Tweak change log wording/formatting, add Fixes tag]
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20230104202437.90039-1-ojaswin@linux.ibm.com

powerpc: dts: t208x: Disable 10G on MAC1 and MAC2

2022-12-23T01:56:29+00:00

There aren't enough resources to run these ports at 10G speeds. Disable
10G for these ports, reverting to the previous speed.

Fixes: 36926a7d70c2 ("powerpc: dts: t208x: Mark MAC1 and MAC2 as 10G")
Reported-by: Camelia Alexandra Groza 
Signed-off-by: Sean Anderson 
Reviewed-by: Camelia Groza 
Tested-by: Camelia Groza 
Link: https://lore.kernel.org/r/20221216172937.2960054-1-sean.anderson@seco.com
Signed-off-by: Jakub Kicinski

Merge tag 'powerpc-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2022-12-19T13:13:33+00:00

Pull powerpc updates from Michael Ellerman:

 - Add powerpc qspinlock implementation optimised for large system
   scalability and paravirt. See the merge message for more details

 - Enable objtool to be built on powerpc to generate mcount locations

 - Use a temporary mm for code patching with the Radix MMU, so the
   writable mapping is restricted to the patching CPU

 - Add an option to build the 64-bit big-endian kernel with the ELFv2
   ABI

 - Sanitise user registers on interrupt entry on 64-bit Book3S

 - Many other small features and fixes

Thanks to Aboorva Devarajan, Angel Iglesias, Benjamin Gray, Bjorn
Helgaas, Bo Liu, Chen Lifu, Christoph Hellwig, Christophe JAILLET,
Christophe Leroy, Christopher M. Riedl, Colin Ian King, Deming Wang,
Disha Goel, Dmitry Torokhov, Finn Thain, Geert Uytterhoeven, Gustavo A.
R. Silva, Haowen Bai, Joel Stanley, Jordan Niethe, Julia Lawall, Kajol
Jain, Laurent Dufour, Li zeming, Miaoqian Lin, Michael Jeanson, Nathan
Lynch, Naveen N. Rao, Nayna Jain, Nicholas Miehlbradt, Nicholas Piggin,
Pali Rohár, Randy Dunlap, Rohan McLure, Russell Currey, Sathvika
Vasireddy, Shaomin Deng, Stephen Kitt, Stephen Rothwell, Thomas
Weißschuh, Tiezhu Yang, Uwe Kleine-König, Xie Shaowen, Xiu Jianfeng,
XueBing Chen, Yang Yingliang, Zhang Jiaming, ruanjinjie, Jessica Yu,
and Wolfram Sang.

* tag 'powerpc-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (181 commits)
  powerpc/code-patching: Fix oops with DEBUG_VM enabled
  powerpc/qspinlock: Fix 32-bit build
  powerpc/prom: Fix 32-bit build
  powerpc/rtas: mandate RTAS syscall filtering
  powerpc/rtas: define pr_fmt and convert printk call sites
  powerpc/rtas: clean up includes
  powerpc/rtas: clean up rtas_error_log_max initialization
  powerpc/pseries/eeh: use correct API for error log size
  powerpc/rtas: avoid scheduling in rtas_os_term()
  powerpc/rtas: avoid device tree lookups in rtas_os_term()
  powerpc/rtasd: use correct OF API for event scan rate
  powerpc/rtas: document rtas_call()
  powerpc/pseries: unregister VPA when hot unplugging a CPU
  powerpc/pseries: reset the RCU watchdogs after a LPM
  powerpc: Take in account addition CPU node when building kexec FDT
  powerpc: export the CPU node count
  powerpc/cpuidle: Set CPUIDLE_FLAG_POLLING for snooze state
  powerpc/dts/fsl: Fix pca954x i2c-mux node names
  cxl: Remove unnecessary cxl_pci_window_alignment()
  selftests/powerpc: Fix resource leaks
  ...

powerpc/dts/fsl: Fix pca954x i2c-mux node names

2022-12-06T12:15:53+00:00

"make dtbs_check":

    arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dtb: pca9546@77: $nodename:0: 'pca9546@77' does not match '^(i2c-?)?mux'
           From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
    arch/powerpc/boot/dts/fsl/t1024qds.dtb: pca9547@77: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@2', 'i2c@3' were unexpected)
           From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
    ...

Fix this by renaming pca954x nodes to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.

Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/6c5d86c49ac170e9d56ab121ea0602f3873849ca.1669999298.git.geert+renesas@glider.be

powerpc: dts: turris1x.dts: Add channel labels for temperature sensor

2022-11-30T10:46:48+00:00

Channel 0 of SA56004ED chip refers to internal SA56004ED chip sensor (chip
itself is located on the board) and channel 1 of SA56004ED chip refers to
external sensor which is connected to temperature diode of the P2020 CPU.

Fixes: 54c15ec3b738 ("powerpc: dts: Add DTS file for CZ.NIC Turris 1.x routers")
Signed-off-by: Pali Rohár 
Reviewed-by: Marek Behún 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20220930123901.10251-1-pali@kernel.org

powerpc: Use "grep -E" instead of "egrep"

2022-11-24T12:31:51+00:00

The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:
	egrep: warning: egrep is obsolescent; using grep -E
fix this up by moving the related file to use "grep -E" instead.

  sed -i "s/egrep/grep -E/g" `grep egrep -rwl arch/powerpc`

Here are the steps to install the latest grep:

  wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz
  tar xf grep-3.8.tar.gz
  cd grep-3.8 && ./configure && make
  sudo make install
  export PATH=/usr/local/bin:$PATH

Signed-off-by: Tiezhu Yang 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/1668764429-11540-1-git-send-email-yangtiezhu@loongson.cn

powerpc: suppress some linker warnings in recent linker versions

2022-11-24T12:31:49+00:00

This is a follow on from commit

  0d362be5b142 ("Makefile: link with -z noexecstack --no-warn-rwx-segments")

for arch/powerpc/boot to address wanrings like:

  ld: warning: opal-calls.o: missing .note.GNU-stack section implies executable stack
  ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
  ld: warning: arch/powerpc/boot/zImage.epapr has a LOAD segment with RWX permissions

This fixes issue https://github.com/linuxppc/issues/issues/417

Signed-off-by: Stephen Rothwell 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20221010165721.106267e6@canb.auug.org.au

powerpc/microwatt: Add litesd

2022-11-24T12:31:48+00:00

This is the register layout of the litesd peripheral for the fusesoc
based Microwatt SoC.

It requires a description of the system clock, which is hardcoded to
100MHz.

Signed-off-by: Joel Stanley 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20220930065012.2860577-1-joel@jms.id.au

powerpc/warp: switch to using gpiod API

2022-11-24T12:31:47+00:00

This switches PIKA Warp away from legacy gpio API and to newer gpiod
API, so that we can eventually deprecate the former.

Because LEDs are normally driven by leds-gpio driver, but the
platform code also wants to access the LEDs during thermal shutdown,
and gpiod API does not allow locating GPIO without requesting it,
the platform code is now responsible for locating GPIOs through device
tree and requesting them. It then constructs platform data for
leds-gpio platform device and registers it. This allows platform
code to retain access to LED GPIO descriptors and use them when needed.

Signed-off-by: Dmitry Torokhov 
Acked-by: Christophe Leroy 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/YzKSLcrYmV5kjyeX@google.com