Pull powerpc updates from Michael Ellerman: - Enable STRICT_KERNEL_RWX for Freescale 85xx platforms. - Activate CONFIG_STRICT_KERNEL_RWX by default, while still allowing it to be disabled. - Add support for out-of-line static calls on 32-bit. - Fix oopses doing bpf-to-bpf calls when STRICT_KERNEL_RWX is enabled. - Fix boot hangs on e5500 due to stale value in ESR passed to do_page_fault(). - Fix several bugs on pseries in handling of device tree cache information for hotplugged CPUs, and/or during partition migration. - Various other small features and fixes. Thanks to Alexey Kardashevskiy, Alistair Popple, Anatolij Gustschin, Andrew Donnellan, Athira Rajeev, Bixuan Cui, Bjorn Helgaas, Cédric Le Goater, Christophe Leroy, Daniel Axtens, Daniel Henrique Barboza, Denis Kirjanov, Fabiano Rosas, Frederic Barrat, Gustavo A. R. Silva, Hari Bathini, Jacques de Laval, Joel Stanley, Kai Song, Kajol Jain, Laurent Vivier, Leonardo Bras, Madhavan Srinivasan, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Niklas Schnelle, Oliver O'Halloran, Rob Herring, Russell Currey, Srikar Dronamraju, Stan Johnson, Tyrel Datwyler, Uwe Kleine-König, Vasant Hegde, Wan Jiabing, and Xiaoming Ni, * tag 'powerpc-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (73 commits) powerpc/8xx: Fix Oops with STRICT_KERNEL_RWX without DEBUG_RODATA_TEST powerpc/32e: Ignore ESR in instruction storage interrupt handler powerpc/powernv/prd: Unregister OPAL_MSG_PRD2 notifier during module unload powerpc: Don't provide __kernel_map_pages() without ARCH_SUPPORTS_DEBUG_PAGEALLOC MAINTAINERS: Update powerpc KVM entry powerpc/xmon: fix task state output powerpc/44x/fsp2: add missing of_node_put powerpc/dcr: Use cmplwi instead of 3-argument cmpli KVM: PPC: Tick accounting should defer vtime accounting 'til after IRQ handling powerpc/security: Use a mutex for interrupt exit code patching powerpc/83xx/mpc8349emitx: Make mcu_gpiochip_remove() return void powerpc/fsl_booke: Fix setting of exec flag when setting TLBCAMs powerpc/book3e: Fix set_memory_x() and set_memory_nx() powerpc/nohash: Fix __ptep_set_access_flags() and ptep_set_wrprotect() powerpc/bpf: Fix write protecting JIT code selftests/powerpc: Use date instead of EPOCHSECONDS in mitigation-patching.sh powerpc/64s/interrupt: Fix check_return_regs_valid() false positive powerpc/boot: Set LC_ALL=C in wrapper script powerpc/64s: Default to 64K pages for 64 bit book3s Revert "powerpc/audit: Convert powerpc to AUDIT_ARCH_COMPAT_GENERIC" ...
While trying to build a simple Image for ACADIA platform, I got the following error: WRAP arch/powerpc/boot/simpleImage.acadia INFO: Uncompressed kernel (size 0x6ae7d0) overlaps the address of the wrapper(0x400000) INFO: Fixing the link_address of wrapper to (0x700000) powerpc64-linux-gnu-ld : mode d'émulation non reconnu : -T Émulations prises en charge : elf64ppc elf32ppc elf32ppclinux elf32ppcsim elf64lppc elf32lppc elf32lppclinux elf32lppcsim make[1]: *** [arch/powerpc/boot/Makefile:424 : arch/powerpc/boot/simpleImage.acadia] Erreur 1 make: *** [arch/powerpc/Makefile:285 : simpleImage.acadia] Erreur 2 Trying again with V=1 shows the following command powerpc64-linux-gnu-ld -m -T arch/powerpc/boot/zImage.lds -Ttext 0x700000 --no-dynamic-linker -o arch/powerpc/boot/simpleImage.acadia -Map wrapper.map arch/powerpc/boot/fixed-head.o arch/powerpc/boot/simpleboot.o ./zImage.3278022.o arch/powerpc/boot/wrapper.a The argument of '-m' is missing. This is due to the wrapper script calling 'objdump -p vmlinux' and looking for 'file format', whereas the output of objdump is: vmlinux: format de fichier elf32-powerpc En-tête de programme: LOAD off 0x00010000 vaddr 0xc0000000 paddr 0x00000000 align 2**16 filesz 0x0069e1d4 memsz 0x006c128c flags rwx NOTE off 0x0064591c vaddr 0xc063591c paddr 0x0063591c align 2**2 filesz 0x00000054 memsz 0x00000054 flags --- Add LC_ALL=C at the beginning of the wrapper script in order to get the output expected by the script: vmlinux: file format elf32-powerpc Program Header: LOAD off 0x00010000 vaddr 0xc0000000 paddr 0x00000000 align 2**16 filesz 0x0069e1d4 memsz 0x006c128c flags rwx NOTE off 0x0064591c vaddr 0xc063591c paddr 0x0063591c align 2**2 filesz 0x00000054 memsz 0x00000054 flags --- Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/a9ff3bc98035f63b122c051f02dc47c7aed10430.1635256089.git.christophe.leroy@csgroup.eu
Fixes build warnings: Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211013220532.24759-4-agust@denx.de
Fix ranges property warnings: pci@f0000d00:ranges: 'oneOf' conditional failed, one must be fixed: Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211013220532.24759-3-agust@denx.de
Add ranges property to fix build warnings: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211013220532.24759-2-agust@denx.de
CONFIG_PPC64_BOOT_WRAPPER is selected by CPU_LITTLE_ENDIAN which is used to compile support for other platforms such as Microwatt. There is no need for OPAL calls on these. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211011070356.99952-1-clg@kaod.org
Property phy-connection-type contains invalid value "sgmii-2500" per scheme
defined in file ethernet-controller.yaml.
Correct phy-connection-type value should be "2500base-x".
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 84e0f1c13806 ("powerpc/mpc85xx: Add MDIO bus muxing support to the board device tree(s)")
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen reported that the build was broken since commit
6d2ef226f2f1 ("compiler_attributes.h: drop __has_attribute() support for
gcc4"), with errors such as:
include/linux/compiler_attributes.h:296:5: warning: "__has_attribute" is not defined, evaluates to 0 [-Wundef]
296 | #if __has_attribute(__warning__)
| ^~~~~~~~~~~~~~~
make[2]: *** [arch/powerpc/boot/Makefile:225: arch/powerpc/boot/crt0.o] Error 1
But we expect __has_attribute() to always be defined now that we've
stopped using GCC 4.
Linus debugged it to the point of reading the GCC sources, and noticing
that the problem is that __has_attribute() is not defined when
preprocessing assembly files, which is what we're doing here.
Our assembly files don't include, or need, compiler_attributes.h, but
they are getting it unconditionally from the -include in BOOT_CFLAGS,
which is then added in its entirety to BOOT_AFLAGS.
That -include was added in commit 77433830ed16 ("powerpc: boot: include
compiler_attributes.h") so that we'd have "fallthrough" and other
attributes defined for the C files in arch/powerpc/boot. But it's not
needed for assembly files.
The minimal fix is to move the addition to BOOT_CFLAGS of -include
compiler_attributes.h until after we've copied BOOT_CFLAGS into
BOOT_AFLAGS. That avoids including compiler_attributes.h for asm files,
but makes no other change to BOOT_CFLAGS or BOOT_AFLAGS.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Debugged-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The liteeth network device is used in the Microwatt soc. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210826122653.3236867-2-joel@jms.id.au
Merge the changes to retire the legacy WR sbc8548 and sbc8641 platforms from Paul. These were sent as a pull request, but I rebased them onto rc2 so as not to pull too many unrelated changes in to my next. Description from Paul's pull request follows: In v2.6.27 (2008, 917f0af9e5a9) the sbc8260 support was implicitly retired by not being carried forward through the ppc --> powerpc device tree transition. Then, in v3.6 (2012, b048b4e17cbb) we retired the support for the sbc8560 boards. Next, in v4.18 (2017, 3bc6cf5a86e5) we retired the support for the 2006 vintage sbc834x boards. The sbc8548 and sbc8641d boards were maybe 1-2 years newer than the sbc834x boards, but it is also 3+ years later, so it makes sense to now retire them as well - which is what is done here. These two remaining WR boards were based on the Freescale MPC8548-CDS and the MPC8641D-HPCN reference board implementations. Having had the chance to use these and many other Fsl ref boards, I know this: The Freescale reference boards were typically produced in limited quantity and primarily available to BSP developers and hardware designers, and not likely to have found a 2nd life with hobbyists and/or collectors. It was good to have that BSP code subjected to mainline review and hence also widely available back in the day. But given the above, we should probably also be giving serious consideration to retiring additional similar age/type reference board platforms as well. I've always felt it is important for us to be proactive in retiring old code, since it has a genuine non-zero carrying cost, as described in the 930d52c012b8 merge log. But for the here and now, we just clean up the remaining BSP code that I had added for SBC platforms. Link: https://lore.kernel.org/r/20210824174209.GB160508@windriver.com